Slave Qualification for address 0.
QUALMODE0_R | Field QUALMODE0 reader - Qualify mode for slave address 0.
|
QUALMODE0_W | Field QUALMODE0 writer - Qualify mode for slave address 0.
|
R | Register SLVQUAL0 reader
|
SLVQUAL0_R | Field SLVQUAL0 reader - Slave address Qualifier for address 0. A value of 0 causes the address in SLVADR0 to be used as-is, assuming that it is enabled. If QUALMODE0 = 0, any bit in this field which is set to 1 will cause an automatic match of the corresponding bit of the received address when it is compared to the SLVADR0 register. If QUALMODE0 = 1, an address range is matched for address 0. This range extends from the value defined by SLVADR0 to the address defined by SLVQUAL0 (address matches when SLVADR0[7:1]
<= received address <= SLVQUAL0[7:1]).
|
SLVQUAL0_SPEC | Slave Qualification for address 0.
|
SLVQUAL0_W | Field SLVQUAL0 writer - Slave address Qualifier for address 0. A value of 0 causes the address in SLVADR0 to be used as-is, assuming that it is enabled. If QUALMODE0 = 0, any bit in this field which is set to 1 will cause an automatic match of the corresponding bit of the received address when it is compared to the SLVADR0 register. If QUALMODE0 = 1, an address range is matched for address 0. This range extends from the value defined by SLVADR0 to the address defined by SLVQUAL0 (address matches when SLVADR0[7:1]
<= received address <= SLVQUAL0[7:1]).
|
W | Register SLVQUAL0 writer
|