Module lpc55_pac::sct0::outputdirctrl [−][src]
SCT output counter direction control register
Structs
SETCLR0_W | Write proxy for field |
SETCLR1_W | Write proxy for field |
SETCLR2_W | Write proxy for field |
SETCLR3_W | Write proxy for field |
SETCLR4_W | Write proxy for field |
SETCLR5_W | Write proxy for field |
SETCLR6_W | Write proxy for field |
SETCLR7_W | Write proxy for field |
SETCLR8_W | Write proxy for field |
SETCLR9_W | Write proxy for field |
SETCLR10_W | Write proxy for field |
SETCLR11_W | Write proxy for field |
SETCLR12_W | Write proxy for field |
SETCLR13_W | Write proxy for field |
SETCLR14_W | Write proxy for field |
SETCLR15_W | Write proxy for field |
Enums
SETCLR0_A | Set/clear operation on output 0. Value 0x3 is reserved. Do not program this value. |
SETCLR1_A | Set/clear operation on output 1. Value 0x3 is reserved. Do not program this value. |
SETCLR2_A | Set/clear operation on output 2. Value 0x3 is reserved. Do not program this value. |
SETCLR3_A | Set/clear operation on output 3. Value 0x3 is reserved. Do not program this value. |
SETCLR4_A | Set/clear operation on output 4. Value 0x3 is reserved. Do not program this value. |
SETCLR5_A | Set/clear operation on output 5. Value 0x3 is reserved. Do not program this value. |
SETCLR6_A | Set/clear operation on output 6. Value 0x3 is reserved. Do not program this value. |
SETCLR7_A | Set/clear operation on output 7. Value 0x3 is reserved. Do not program this value. |
SETCLR8_A | Set/clear operation on output 8. Value 0x3 is reserved. Do not program this value. |
SETCLR9_A | Set/clear operation on output 9. Value 0x3 is reserved. Do not program this value. |
SETCLR10_A | Set/clear operation on output 10. Value 0x3 is reserved. Do not program this value. |
SETCLR11_A | Set/clear operation on output 11. Value 0x3 is reserved. Do not program this value. |
SETCLR12_A | Set/clear operation on output 12. Value 0x3 is reserved. Do not program this value. |
SETCLR13_A | Set/clear operation on output 13. Value 0x3 is reserved. Do not program this value. |
SETCLR14_A | Set/clear operation on output 14. Value 0x3 is reserved. Do not program this value. |
SETCLR15_A | Set/clear operation on output 15. Value 0x3 is reserved. Do not program this value. |
Type Definitions
R | Reader of register OUTPUTDIRCTRL |
SETCLR0_R | Reader of field |
SETCLR1_R | Reader of field |
SETCLR2_R | Reader of field |
SETCLR3_R | Reader of field |
SETCLR4_R | Reader of field |
SETCLR5_R | Reader of field |
SETCLR6_R | Reader of field |
SETCLR7_R | Reader of field |
SETCLR8_R | Reader of field |
SETCLR9_R | Reader of field |
SETCLR10_R | Reader of field |
SETCLR11_R | Reader of field |
SETCLR12_R | Reader of field |
SETCLR13_R | Reader of field |
SETCLR14_R | Reader of field |
SETCLR15_R | Reader of field |
W | Writer for register OUTPUTDIRCTRL |