Struct linux_perf_event_reader::AttrFlags

pub struct AttrFlags { /* private fields */ }

Implementations

impl AttrFlags

pub const DISABLED: Self = Self{bits: ATTR_FLAG_BIT_DISABLED,}

off by default

pub const INHERIT: Self = Self{bits: ATTR_FLAG_BIT_INHERIT,}

children inherit it

pub const PINNED: Self = Self{bits: ATTR_FLAG_BIT_PINNED,}

must always be on PMU

pub const EXCLUSIVE: Self = Self{bits: ATTR_FLAG_BIT_EXCLUSIVE,}

only group on PMU

pub const EXCLUDE_USER: Self = Self{bits: ATTR_FLAG_BIT_EXCLUDE_USER,}

don’t count user

pub const EXCLUDE_KERNEL: Self = Self{bits: ATTR_FLAG_BIT_EXCLUDE_KERNEL,}

don’t count kernel

pub const EXCLUDE_HV: Self = Self{bits: ATTR_FLAG_BIT_EXCLUDE_HV,}

don’t count hypervisor

pub const EXCLUDE_IDLE: Self = Self{bits: ATTR_FLAG_BIT_EXCLUDE_IDLE,}

don’t count when idle

pub const MMAP: Self = Self{bits: ATTR_FLAG_BIT_MMAP,}

include mmap data

pub const COMM: Self = Self{bits: ATTR_FLAG_BIT_COMM,}

include comm data

pub const FREQ: Self = Self{bits: ATTR_FLAG_BIT_FREQ,}

use freq, not period

pub const INHERIT_STAT: Self = Self{bits: ATTR_FLAG_BIT_INHERIT_STAT,}

per task counts

pub const ENABLE_ON_EXEC: Self = Self{bits: ATTR_FLAG_BIT_ENABLE_ON_EXEC,}

next exec enables

pub const TASK: Self = Self{bits: ATTR_FLAG_BIT_TASK,}

trace fork/exit

pub const WATERMARK: Self = Self{bits: ATTR_FLAG_BIT_WATERMARK,}

wakeup_watermark

pub const PRECISE_IP_BIT_15: Self = Self{bits: 1 << 15,}

one of the two PRECISE_IP bitmask bits

pub const PRECISE_IP_BIT_16: Self = Self{bits: 1 << 16,}

one of the two PRECISE_IP bitmask bits

pub const PRECISE_IP_BITMASK: Self = Self{bits: ATTR_FLAG_BITMASK_PRECISE_IP,}

the full PRECISE_IP bitmask

pub const MMAP_DATA: Self = Self{bits: ATTR_FLAG_BIT_MMAP_DATA,}

non-exec mmap data

pub const SAMPLE_ID_ALL: Self = Self{bits: ATTR_FLAG_BIT_SAMPLE_ID_ALL,}

sample_type all events

pub const EXCLUDE_HOST: Self = Self{bits: ATTR_FLAG_BIT_EXCLUDE_HOST,}

don’t count in host

pub const EXCLUDE_GUEST: Self = Self{bits: ATTR_FLAG_BIT_EXCLUDE_GUEST,}

don’t count in guest

pub const EXCLUDE_CALLCHAIN_KERNEL: Self = Self{bits: ATTR_FLAG_BIT_EXCLUDE_CALLCHAIN_KERNEL,}

exclude kernel callchains

pub const EXCLUDE_CALLCHAIN_USER: Self = Self{bits: ATTR_FLAG_BIT_EXCLUDE_CALLCHAIN_USER,}

exclude user callchains

pub const MMAP2: Self = Self{bits: ATTR_FLAG_BIT_MMAP2,}

include mmap with inode data

pub const COMM_EXEC: Self = Self{bits: ATTR_FLAG_BIT_COMM_EXEC,}

flag comm events that are due to exec

pub const USE_CLOCKID: Self = Self{bits: ATTR_FLAG_BIT_USE_CLOCKID,}

use @clockid for time fields

pub const CONTEXT_SWITCH: Self = Self{bits: ATTR_FLAG_BIT_CONTEXT_SWITCH,}

context switch data

pub const WRITE_BACKWARD: Self = Self{bits: ATTR_FLAG_BIT_WRITE_BACKWARD,}

Write ring buffer from end to beginning

pub const NAMESPACES: Self = Self{bits: ATTR_FLAG_BIT_NAMESPACES,}

include namespaces data

pub const KSYMBOL: Self = Self{bits: ATTR_FLAG_BIT_KSYMBOL,}

include ksymbol events

pub const BPF_EVENT: Self = Self{bits: ATTR_FLAG_BIT_BPF_EVENT,}

include bpf events

pub const AUX_OUTPUT: Self = Self{bits: ATTR_FLAG_BIT_AUX_OUTPUT,}

generate AUX records instead of events

pub const CGROUP: Self = Self{bits: ATTR_FLAG_BIT_CGROUP,}

include cgroup events

pub const TEXT_POKE: Self = Self{bits: ATTR_FLAG_BIT_TEXT_POKE,}

include text poke events

pub const BUILD_ID: Self = Self{bits: ATTR_FLAG_BIT_BUILD_ID,}

use build id in mmap2 events

pub const INHERIT_THREAD: Self = Self{bits: ATTR_FLAG_BIT_INHERIT_THREAD,}

children only inherit if cloned with CLONE_THREAD

pub const REMOVE_ON_EXEC: Self = Self{bits: ATTR_FLAG_BIT_REMOVE_ON_EXEC,}

event is removed from task on exec

pub const SIGTRAP: Self = Self{bits: ATTR_FLAG_BIT_SIGTRAP,}

send synchronous SIGTRAP on event

pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&self) -> u64

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u64) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u64) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u64) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

impl AttrFlags

pub fn ip_skid_constraint(&self) -> IpSkidConstraint

Extract the IpSkidConstraint from the bits.

Trait Implementations

impl Binary for AttrFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd<AttrFlags> for AttrFlags

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

type Output = AttrFlags

The resulting type after applying the & operator.

impl BitAndAssign<AttrFlags> for AttrFlags

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

impl BitOr<AttrFlags> for AttrFlags

fn bitor(self, other: AttrFlags) -> Self

Returns the union of the two sets of flags.

type Output = AttrFlags

The resulting type after applying the | operator.

impl BitOrAssign<AttrFlags> for AttrFlags

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

impl BitXor<AttrFlags> for AttrFlags

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

type Output = AttrFlags

The resulting type after applying the ^ operator.

impl BitXorAssign<AttrFlags> for AttrFlags

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

impl Clone for AttrFlags

fn clone(&self) -> AttrFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for AttrFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<AttrFlags> for AttrFlags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<AttrFlags> for AttrFlags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator.

impl Hash for AttrFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl LowerHex for AttrFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for AttrFlags

fn not(self) -> Self

Returns the complement of this set of flags.

type Output = AttrFlags

The resulting type after applying the ! operator.

impl Octal for AttrFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for AttrFlags

fn cmp(&self, other: &AttrFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl PartialEq<AttrFlags> for AttrFlags

fn eq(&self, other: &AttrFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &AttrFlags) -> bool

This method tests for !=.

impl PartialOrd<AttrFlags> for AttrFlags

fn partial_cmp(&self, other: &AttrFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub<AttrFlags> for AttrFlags

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

type Output = AttrFlags

The resulting type after applying the - operator.

impl SubAssign<AttrFlags> for AttrFlags

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

impl UpperHex for AttrFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for AttrFlags

impl Eq for AttrFlags

impl StructuralEq for AttrFlags

impl StructuralPartialEq for AttrFlags