Enum DeviceState

#[repr(u32)]
pub enum DeviceState {
    Unknown = 0,
    Unmanaged = 10,
    Unavailable = 20,
    Disconnected = 30,
    Prepare = 40,
    Config = 50,
    NeedAuth = 60,
    IpConfig = 70,
    IpCheck = 80,
    Secondaries = 90,
    Activated = 100,
    Deactivating = 110,
    Failed = 120,
}

Available on crate feature network only.

Variants

Unknown = 0

the device’s state is unknown

Unmanaged = 10

the device is recognized, but not managed by NetworkManager

Unavailable = 20

the device is managed by NetworkManager, but is not available for use. Reasons may include the wireless switched off, missing firmware, no ethernet carrier, missing supplicant or modem manager, etc.

Disconnected = 30

the device can be activated, but is currently idle and not connected to a network.

Prepare = 40

the device is preparing the connection to the network. This may include operations like changing the MAC address, setting physical link properties, and anything else required to connect to the requested network.

Config = 50

the device is connecting to the requested network. This may include operations like associating with the Wi-Fi AP, dialing the modem, connecting to the remote Bluetooth device, etc.

NeedAuth = 60

the device requires more information to continue connecting to the requested network. This includes secrets like WiFi passphrases, login passwords, PIN codes, etc.

IpConfig = 70

the device is requesting IPv4 and/or IPv6 addresses and routing information from the network.

IpCheck = 80

the device is checking whether further action is required for the requested network connection. This may include checking whether only local network access is available, whether a captive portal is blocking access to the Internet, etc.

Secondaries = 90

the device is waiting for a secondary connection (like a VPN) which must activated before the device can be activated

Activated = 100

the device has a network connection, either local or global.

Deactivating = 110

a disconnection from the current network connection was requested, and the device is cleaning up resources used for that connection. The network connection may still be valid.

Failed = 120

the device failed to connect to the requested network and is cleaning up the connection request

Trait Implementations

impl Clone for DeviceState

fn clone(&self) -> DeviceState

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DeviceState

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for DeviceState

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl From<u32> for DeviceState

fn from(num: u32) -> Self

Converts to this type from the input type.

impl PartialEq for DeviceState

fn eq(&self, other: &DeviceState) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for DeviceState

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl Copy for DeviceState

impl Eq for DeviceState

impl StructuralPartialEq for DeviceState