Struct libpulse_binding::volume::CVolume

#[repr(C)]
pub struct CVolume {
    pub channels: u8,
    pub values: [Volume; 32],
}

A structure encapsulating a per-channel volume

Fields

channels: u8

Number of channels.

values: [Volume; 32]

Per-channel volume.

Methods

impl CVolume

Important traits for &'a mut W

impl<'a, W> Write for &'a mut W where
    W: Write + ?Sized, impl<'a, R> Read for &'a mut R where
    R: Read + ?Sized, impl<'a, I> Iterator for &'a mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;

pub fn init(&mut self) -> &Self

Initialize the specified volume and return a pointer to it. The sample spec will have a defined state but is_valid will fail for it.

Important traits for &'a mut W

impl<'a, W> Write for &'a mut W where
    W: Write + ?Sized, impl<'a, R> Read for &'a mut R where
    R: Read + ?Sized, impl<'a, I> Iterator for &'a mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;

pub fn set(&mut self, channels: u32, v: Volume) -> &Self

Set the volume of the specified number of channels to the supplied volume

Important traits for &'a mut W

impl<'a, W> Write for &'a mut W where
    W: Write + ?Sized, impl<'a, R> Read for &'a mut R where
    R: Read + ?Sized, impl<'a, I> Iterator for &'a mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;

pub fn reset(&mut self, channels: u32) -> &Self

Set the volume of the first n channels to VOLUME_NORM.

Important traits for &'a mut W

impl<'a, W> Write for &'a mut W where
    W: Write + ?Sized, impl<'a, R> Read for &'a mut R where
    R: Read + ?Sized, impl<'a, I> Iterator for &'a mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;

pub fn mute(&mut self, channels: u32) -> &Self

Set the volume of the first n channels to VOLUME_MUTED.

pub fn equal_to(&self, to: &Self) -> bool

Returns true when self is equal to to.

This checks that the number of channels in self equals the number in to and that the channels volumes in self equal those in to.

pub fn is_muted(&self) -> bool

Returns true if all channels are muted

pub fn is_norm(&self) -> bool

Returns true if all channels are at normal volume level

pub fn avg(&self) -> Volume

Returns the average volume of all channels

pub fn avg_mask(&self, cm: &Map, mask: Option<PositionMask>) -> Volume

Returns the average volume of all channels that are included in the specified channel map with the specified channel position mask.

If no channel is selected the returned value will be VOLUME_MUTED. If mask is None, has the same effect as passing ::channelmap::POSITION_MASK_ALL.

pub fn max(&self) -> Volume

Return the maximum volume of all channels.

pub fn max_mask(&self, cm: &Map, mask: Option<PositionMask>) -> Volume

Return the maximum volume of all channels that are included in the specified channel map with the specified channel position mask.

If no channel is selected the returned value will be VOLUME_MUTED. If mask is None, has the same effect as passing ::channelmap::POSITION_MASK_ALL.

pub fn min(&self) -> Volume

Return the minimum volume of all channels.

pub fn min_mask(&self, cm: &Map, mask: Option<PositionMask>) -> Volume

Return the minimum volume of all channels that are included in the specified channel map with the specified channel position mask.

If no channel is selected the returned value will be VOLUME_MUTED. If mask is None, has the same effect as passing ::channelmap::POSITION_MASK_ALL.

pub fn is_valid(&self) -> bool

Returns true when the CVolume structure is valid.

pub fn channels_equal_to(&self, v: Volume) -> bool

Returns true if the volume of all channels are equal to the specified value.

Important traits for &'a mut W

impl<'a, W> Write for &'a mut W where
    W: Write + ?Sized, impl<'a, R> Read for &'a mut R where
    R: Read + ?Sized, impl<'a, I> Iterator for &'a mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;

pub fn sw_multiply(&mut self, with: Option<&Self>) -> &mut Self

Multiply two per-channel volumes.

If with is None, multiplies with itself. This is only valid for software volumes! Returns pointer to self.

Important traits for &'a mut W

impl<'a, W> Write for &'a mut W where
    W: Write + ?Sized, impl<'a, R> Read for &'a mut R where
    R: Read + ?Sized, impl<'a, I> Iterator for &'a mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;

pub fn sw_multiply_scalar(&mut self, with: Volume) -> &mut Self

Multiply a per-channel volume with a scalar volume.

This is only valid for software volumes! Returns pointer to self.

Important traits for &'a mut W

impl<'a, W> Write for &'a mut W where
    W: Write + ?Sized, impl<'a, R> Read for &'a mut R where
    R: Read + ?Sized, impl<'a, I> Iterator for &'a mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;

pub fn sw_divide(&mut self, with: Option<&Self>) -> &mut Self

Divide two per-channel volumes.

If with is None, divides with itself. This is only valid for software volumes! Returns pointer to self.

Important traits for &'a mut W

impl<'a, W> Write for &'a mut W where
    W: Write + ?Sized, impl<'a, R> Read for &'a mut R where
    R: Read + ?Sized, impl<'a, I> Iterator for &'a mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;

pub fn sw_divide_scalar(&mut self, with: Volume) -> &mut Self

Divide a per-channel volume by a scalar volume.

This is only valid for software volumes! Returns pointer to self.

Important traits for &'a mut W

impl<'a, W> Write for &'a mut W where
    W: Write + ?Sized, impl<'a, R> Read for &'a mut R where
    R: Read + ?Sized, impl<'a, I> Iterator for &'a mut I where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;

pub fn remap(&mut self, from: &Map, to: &Map) -> &mut Self

Remap a volume from one channel mapping to a different channel mapping.

Returns pointer to self.

pub fn is_compatible_with_ss(&self, ss: &Spec) -> bool

Returns true if the specified volume is compatible with the specified sample spec.

pub fn is_compatible_with_cm(&self, cm: &Map) -> bool

Returns true if the specified volume is compatible with the specified channel map.

pub fn get_balance(&self, map: &Map) -> f32

Calculate a 'balance' value for the specified volume with the specified channel map.

The return value will range from -1.0 (left) to +1.0 (right). If no balance value is applicable to this channel map the return value will always be 0.0. See ::channelmap::Map::can_balance.

pub fn set_balance(&mut self, map: &Map, new_balance: f32) -> Option<&mut Self>

Adjust the 'balance' value for the specified volume with the specified channel map.

The balance is a value between -1.0 and +1.0. This operation might not be reversible! Also, after this call get_balance is not guaranteed to actually return the requested balance value (e.g. when the input volume was zero anyway for all channels). If no balance value is applicable to this channel map the volume will not be modified. See ::channelmap::Map::can_balance.

Returns pointer to self, or None on error.

pub fn get_fade(&self, map: &Map) -> f32

Calculate a 'fade' value (i.e. 'balance' between front and rear) for the specified volume with the specified channel map.

The return value will range from -1.0f (rear) to +1.0f (left). If no fade value is applicable to this channel map the return value will always be 0.0. See ::channelmap::Map::can_fade.

pub fn set_fade(&mut self, map: &Map, new_fade: f32) -> Option<&mut Self>

Adjust the 'fade' value (i.e. 'balance' between front and rear) for the specified volume with the specified channel map.

The balance is a value between -1.0 and +1.0. This operation might not be reversible! Also, after this call get_fade is not guaranteed to actually return the requested fade value (e.g. when the input volume was zero anyway for all channels). If no fade value is applicable to this channel map the volume will not be modified. See ::channelmap::Map::can_fade.

Returns pointer to self, or None on error.

pub fn get_lfe_balance(&self, map: &Map) -> f32

Calculate a 'lfe balance' value for the specified volume with the specified channel map.

The return value will range from -1.0 (no lfe) to +1.0 (only lfe), where 0.0 is balanced. If no value is applicable to this channel map the return value will always be 0.0. See ::channelmap::Map::can_lfe_balance.

pub fn set_lfe_balance(
    &mut self,
    map: &Map,
    new_balance: f32
) -> Option<&mut Self>

Adjust the 'lfe balance' value for the specified volume with the specified channel map.

The balance is a value between -1.0 (no lfe) and +1.0 (only lfe). This operation might not be reversible! Also, after this call get_lfe_balance is not guaranteed to actually return the requested value (e.g. when the input volume was zero anyway for all channels). If no lfe balance value is applicable to this channel map the volume will not be modified. See ::channelmap::Map::can_lfe_balance.

Returns pointer to self, or None on error.

pub fn scale(&mut self, max: Volume) -> Option<&mut Self>

Scale so that the maximum volume of all channels equals max.

The proportions between the channel volumes are kept. Returns pointer to self, or None on error.

pub fn scale_mask(
    &mut self,
    max: Volume,
    cm: &mut Map,
    mask: Option<PositionMask>
) -> Option<&mut Self>

Scale so that the maximum volume of all channels selected via cm/mask equals max.

This also modifies the volume of those channels that are unmasked. The proportions between the channel volumes are kept.

If mask is None, has the same effect as passing ::channelmap::POSITION_MASK_ALL.

Returns pointer to self, or None on error.

pub fn set_position(
    &mut self,
    map: &Map,
    t: Position,
    v: Volume
) -> Option<&mut Self>

Set the passed volume to all channels at the specified channel position.

Returns None if either invalid data was provided, or if there is no channel at the position specified. You can check if a channel map includes a specific position by calling ::channelmap::Map::has_position. On success, returns pointer to self.

pub fn get_position(&self, map: &Map, t: Position) -> Volume

Get the maximum volume of all channels at the specified channel position.

Will return 0 if there is no channel at the position specified. You can check if a channel map includes a specific position by calling ::channelmap::Map::has_position.

pub fn merge(&mut self, with: &Self) -> Option<&mut Self>

Merges one set of channel volumes with another.

The channel count is set to the minimum between that of self and that of with. Only this number of channels are processed. For each channel processed, volume is set to the greatest of the values from self and from with. I.e if one set has three channels and the other has two, the number of channels will be set to two, and only the first two channels will be compared, with the greatest values of these two channels being stored. The third channel in the one set will be ignored.

Returns pointer to self, or None on error.

pub fn inc_clamp(&mut self, inc: Volume, limit: Volume) -> Option<&mut Self>

Increase the volume passed in by inc, but not exceeding limit. The proportions between the channels are kept. Returns pointer to self, or None on error.

pub fn inc(&mut self, inc: Volume) -> Option<&mut Self>

Increase the volume passed in by inc. The proportions between the channels are kept. Returns pointer to self, or None on error.

pub fn dec(&mut self, dec: Volume) -> Option<&mut Self>

Decrease the volume passed in by dec. The proportions between the channels are kept. Returns pointer to self, or None on error.

pub fn print(&self) -> Option<String>

Pretty print a volume structure

pub fn print_db(&self) -> Option<String>

Pretty print a volume structure but show dB values.

pub fn print_verbose(&self, map: Option<&Map>, print_db: bool) -> Option<String>

Pretty print a volume structure in a verbose way.

The volume for each channel is printed in several formats: the raw Volume value, percentage, and if print_db is non-zero, also the dB value. If map is provided, the channel names will be printed.

Trait Implementations

impl Debug for CVolume

fn fmt(&self, __arg_0: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Copy for CVolume

impl Clone for CVolume

fn clone(&self) -> CVolume

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for CVolume

fn default() -> CVolume

Returns the "default value" for a type.