Enum MbdSymbol 

#[repr(u16)]
pub enum MbdSymbol {
    None = 0,
    ArcLength = 174,
    Between = 175,
    Degrees = 176,
    PlusMinus = 177,
    Angularity = 178,
    Cylindricity = 179,
    Roundness = 180,
    Concentricity = 181,
    Straightness = 182,
    Parallelism = 183,
    Flatness = 184,
    ProfileOfLine = 185,
    SurfaceProfile = 186,
    Symmetry = 187,
    Perpendicularity = 188,
    Runout = 189,
    TotalRunout = 190,
    Position = 191,
    CenterLine = 192,
    PartingLine = 193,
    IsoEnvelope = 195,
    IsoEnvelopeNonY145M = 196,
    FreeState = 197,
    StatisticalTolerance = 198,
    ContinuousFeature = 199,
    Independency = 200,
    Depth = 201,
    Start = 202,
    LeastCondition = 203,
    MaxCondition = 204,
    ConicalTaper = 205,
    Projected = 206,
    Slope = 207,
    Micro = 208,
    TangentPlane = 210,
    Unilateral = 211,
    SquareFeature = 212,
    Countersink = 213,
    SpotFace = 214,
    Target = 215,
    Diameter = 216,
    Radius = 217,
    SphericalRadius = 218,
    SphericalDiameter = 219,
    ControlledRadius = 220,
    BoxStart = 123,
    BoxBar = 162,
    BoxBarBetween = 124,
    LetterBackwardUnderline = 95,
    PunctuationBackwardUnderline = 92,
    ModifierBackwardUnderline = 126,
    NumericBackwardUnderline = 96,
    BoxEnd = 125,
    DatumUp = 166,
    DatumLeft = 168,
    DatumRight = 167,
    DatumDown = 165,
    DatumTriangle = 295,
    HalfSpace = 236,
    QuarterSpace = 237,
    EighthSpace = 238,
    ModifierSpace = 239,
}

MBD symbol type

Variants

None = 0

ArcLength = 174

Between = 175

Degrees = 176

PlusMinus = 177

Angularity = 178

Cylindricity = 179

Roundness = 180

Concentricity = 181

Straightness = 182

Parallelism = 183

Flatness = 184

ProfileOfLine = 185

SurfaceProfile = 186

Symmetry = 187

Perpendicularity = 188

Runout = 189

TotalRunout = 190

Position = 191

CenterLine = 192

PartingLine = 193

IsoEnvelope = 195

IsoEnvelopeNonY145M = 196

FreeState = 197

StatisticalTolerance = 198

ContinuousFeature = 199

Independency = 200

Depth = 201

Start = 202

LeastCondition = 203

MaxCondition = 204

ConicalTaper = 205

Projected = 206

Slope = 207

Micro = 208

TangentPlane = 210

Unilateral = 211

SquareFeature = 212

Countersink = 213

SpotFace = 214

Target = 215

Diameter = 216

Radius = 217

SphericalRadius = 218

SphericalDiameter = 219

ControlledRadius = 220

BoxStart = 123

BoxBar = 162

BoxBarBetween = 124

LetterBackwardUnderline = 95

PunctuationBackwardUnderline = 92

ModifierBackwardUnderline = 126

NumericBackwardUnderline = 96

BoxEnd = 125

DatumUp = 166

DatumLeft = 168

DatumRight = 167

DatumDown = 165

DatumTriangle = 295

HalfSpace = 236

QuarterSpace = 237

EighthSpace = 238

ModifierSpace = 239

Trait Implementations

impl Clone for MbdSymbol

fn clone(&self) -> MbdSymbol

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MbdSymbol

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for MbdSymbol

fn default() -> MbdSymbol

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for MbdSymbol

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for MbdSymbol

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl ExternType for MbdSymbol

type Kind = Trivial

Either cxx::kind::Opaque or cxx::kind::Trivial.

type Id

A type-level representation of the type’s C++ namespace and type name.

impl FromStr for MbdSymbol

type Err = ParseError

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<Self, Self::Err>

Parses a string s to return a value of this type.

impl JsonSchema for MbdSymbol

fn schema_name() -> String

The name of the generated JSON Schema.

fn schema_id() -> Cow<'static, str>

Returns a string that uniquely identifies the schema produced by this type.

fn json_schema(generator: &mut SchemaGenerator) -> Schema

Generates a JSON Schema for this type.

fn is_referenceable() -> bool

Whether JSON Schemas generated for this type should be re-used where possible using the $ref keyword.

impl Ord for MbdSymbol

fn cmp(&self, other: &MbdSymbol) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for MbdSymbol

fn eq(&self, other: &MbdSymbol) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for MbdSymbol

fn partial_cmp(&self, other: &MbdSymbol) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sequence for MbdSymbol

const CARDINALITY: usize = 63usize

Number of values of type Self.

fn next(&self) -> Option<Self>

Returns value following *self or None if this was the end.

fn previous(&self) -> Option<Self>

Returns value preceding *self or None if this was the beginning.

fn first() -> Option<Self>

Returns the first value of type Self.

fn last() -> Option<Self>

Returns the last value of type Self.

impl Serialize for MbdSymbol

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl TS for MbdSymbol

type WithoutGenerics = MbdSymbol

If this type does not have generic parameters, then WithoutGenerics should just be Self. If the type does have generic parameters, then all generic parameters must be replaced with a dummy type, e.g ts_rs::Dummy or (). The only requirement for these dummy types is that EXPORT_TO must be None.

type OptionInnerType = MbdSymbol

If the implementing type is std::option::Option<T>, then this associated type is set to T. All other implementations of TS should set this type to Self instead.

fn ident() -> String

Identifier of this type, excluding generic parameters.

fn docs() -> Option<String>

JSDoc comment to describe this type in TypeScript - when TS is derived, docs are automatically read from your doc comments or #[doc = ".."] attributes

fn name() -> String

Name of this type in TypeScript, including generic parameters

fn decl_concrete() -> String

Declaration of this type using the supplied generic arguments. The resulting TypeScript definition will not be generic. For that, see TS::decl(). If this type is not generic, then this function is equivalent to TS::decl().

fn decl() -> String

Declaration of this type, e.g. type User = { user_id: number, ... }. This function will panic if the type has no declaration.

fn inline() -> String

Formats this types definition in TypeScript, e.g { user_id: number }. This function will panic if the type cannot be inlined.

fn inline_flattened() -> String

Flatten a type declaration.
This function will panic if the type cannot be flattened.

fn visit_generics(v: &mut impl TypeVisitor)

where Self: 'static,

Iterates over all type parameters of this type.

fn output_path() -> Option<PathBuf>

Returns the output path to where T should be exported.
The returned path does not include the base directory from TS_RS_EXPORT_DIR.

fn visit_dependencies(v: &mut impl TypeVisitor)

where Self: 'static,

Iterates over all dependency of this type.

fn dependencies() -> Vec<Dependency>

where Self: 'static,

Resolves all dependencies of this type recursively.

fn export() -> Result<(), ExportError>

where Self: 'static,

Manually export this type to the filesystem. To export this type together with all of its dependencies, use TS::export_all.

fn export_all() -> Result<(), ExportError>

where Self: 'static,

Manually export this type to the filesystem, together with all of its dependencies.
To export only this type, without its dependencies, use TS::export.

fn export_all_to(out_dir: impl AsRef<Path>) -> Result<(), ExportError>

where Self: 'static,

Manually export this type into the given directory, together with all of its dependencies.
To export only this type, without its dependencies, use TS::export.

fn export_to_string() -> Result<String, ExportError>

where Self: 'static,

Manually generate bindings for this type, returning a String.
This function does not format the output, even if the format feature is enabled.

fn default_output_path() -> Option<PathBuf>

Returns the output path to where T should be exported.

impl Copy for MbdSymbol

impl Eq for MbdSymbol

impl StructuralPartialEq for MbdSymbol