Struct kitsune_p2p_dht::Loc
source · [−]Expand description
Type for representing a location that can wrap around a u32 dht arc
Tuple Fields
0: Wrapping<u32>
Implementations
sourceimpl DhtLocation
impl DhtLocation
Methods from Deref<Target = Wrapping<u32>>
pub const MIN: Wrapping<usize> = Self(usize::MIN)
pub const MAX: Wrapping<usize> = Self(usize::MAX)
pub const BITS: u32 = 64u32
pub const MIN: Wrapping<u8> = Self(u8::MIN)
pub const MAX: Wrapping<u8> = Self(u8::MAX)
pub const BITS: u32 = 8u32
pub const MIN: Wrapping<u16> = Self(u16::MIN)
pub const MAX: Wrapping<u16> = Self(u16::MAX)
pub const BITS: u32 = 16u32
pub const MIN: Wrapping<u32> = Self(u32::MIN)
pub const MAX: Wrapping<u32> = Self(u32::MAX)
pub const BITS: u32 = 32u32
pub const MIN: Wrapping<u64> = Self(u64::MIN)
pub const MAX: Wrapping<u64> = Self(u64::MAX)
pub const BITS: u32 = 64u32
pub const MIN: Wrapping<u128> = Self(u128::MIN)
pub const MAX: Wrapping<u128> = Self(u128::MAX)
pub const BITS: u32 = 128u32
pub const MIN: Wrapping<isize> = Self(isize::MIN)
pub const MAX: Wrapping<isize> = Self(isize::MAX)
pub const BITS: u32 = 64u32
pub const MIN: Wrapping<i8> = Self(i8::MIN)
pub const MAX: Wrapping<i8> = Self(i8::MAX)
pub const BITS: u32 = 8u32
pub const MIN: Wrapping<i16> = Self(i16::MIN)
pub const MAX: Wrapping<i16> = Self(i16::MAX)
pub const BITS: u32 = 16u32
pub const MIN: Wrapping<i32> = Self(i32::MIN)
pub const MAX: Wrapping<i32> = Self(i32::MAX)
pub const BITS: u32 = 32u32
Trait Implementations
sourceimpl Add<DhtLocation> for DhtLocation
impl Add<DhtLocation> for DhtLocation
type Output = DhtLocation
type Output = DhtLocation
The resulting type after applying the +
operator.
sourcefn add(self, rhs: DhtLocation) -> <DhtLocation as Add<DhtLocation>>::Output
fn add(self, rhs: DhtLocation) -> <DhtLocation as Add<DhtLocation>>::Output
Performs the +
operation. Read more
sourceimpl ArqStart for Loc
impl ArqStart for Loc
sourcefn to_offset(&self, topo: &Topology, power: u8) -> SpaceOffset
fn to_offset(&self, topo: &Topology, power: u8) -> SpaceOffset
Get the exponential SpaceOffset representation
sourcefn requantize_up(&self, _factor: u32) -> Option<Self>
fn requantize_up(&self, _factor: u32) -> Option<Self>
Requantize to a higher power, using the precalculated multiplicative factor.
sourcefn requantize_down(&self, _factor: u32) -> Self
fn requantize_down(&self, _factor: u32) -> Self
Requantize to a lower power, using the precalculated multiplicative factor.
sourceimpl AsPrimitive<u32> for DhtLocation
impl AsPrimitive<u32> for DhtLocation
sourceimpl AsRef<Wrapping<u32>> for DhtLocation
impl AsRef<Wrapping<u32>> for DhtLocation
sourceimpl Clone for DhtLocation
impl Clone for DhtLocation
sourcefn clone(&self) -> DhtLocation
fn clone(&self) -> DhtLocation
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for DhtLocation
impl Debug for DhtLocation
sourceimpl Deref for DhtLocation
impl Deref for DhtLocation
sourceimpl<'de> Deserialize<'de> for DhtLocation
impl<'de> Deserialize<'de> for DhtLocation
sourcefn deserialize<__D>(
__deserializer: __D
) -> Result<DhtLocation, <__D as Deserializer<'de>>::Error> where
__D: Deserializer<'de>,
fn deserialize<__D>(
__deserializer: __D
) -> Result<DhtLocation, <__D as Deserializer<'de>>::Error> where
__D: Deserializer<'de>,
Deserialize this value from the given Serde deserializer. Read more
sourceimpl Display for DhtLocation
impl Display for DhtLocation
sourceimpl Div<DhtLocation> for DhtLocation
impl Div<DhtLocation> for DhtLocation
type Output = DhtLocation
type Output = DhtLocation
The resulting type after applying the /
operator.
sourcefn div(self, rhs: DhtLocation) -> <DhtLocation as Div<DhtLocation>>::Output
fn div(self, rhs: DhtLocation) -> <DhtLocation as Div<DhtLocation>>::Output
Performs the /
operation. Read more
sourceimpl From<DhtLocation> for Wrapping<u32>
impl From<DhtLocation> for Wrapping<u32>
sourcefn from(original: DhtLocation) -> Wrapping<u32>
fn from(original: DhtLocation) -> Wrapping<u32>
Converts to this type from the input type.
sourceimpl From<DhtLocation> for u32
impl From<DhtLocation> for u32
sourcefn from(l: DhtLocation) -> u32
fn from(l: DhtLocation) -> u32
Converts to this type from the input type.
sourceimpl From<Wrapping<u32>> for DhtLocation
impl From<Wrapping<u32>> for DhtLocation
sourcefn from(original: Wrapping<u32>) -> DhtLocation
fn from(original: Wrapping<u32>) -> DhtLocation
Converts to this type from the input type.
sourceimpl From<u32> for DhtLocation
impl From<u32> for DhtLocation
sourcefn from(a: u32) -> DhtLocation
fn from(a: u32) -> DhtLocation
Converts to this type from the input type.
sourceimpl Hash for DhtLocation
impl Hash for DhtLocation
sourceimpl Mul<DhtLocation> for DhtLocation
impl Mul<DhtLocation> for DhtLocation
type Output = DhtLocation
type Output = DhtLocation
The resulting type after applying the *
operator.
sourcefn mul(self, rhs: DhtLocation) -> <DhtLocation as Mul<DhtLocation>>::Output
fn mul(self, rhs: DhtLocation) -> <DhtLocation as Mul<DhtLocation>>::Output
Performs the *
operation. Read more
sourceimpl Num for DhtLocation
impl Num for DhtLocation
type FromStrRadixErr = <u32 as Num>::FromStrRadixErr
sourcefn from_str_radix(
str: &str,
radix: u32
) -> Result<DhtLocation, <DhtLocation as Num>::FromStrRadixErr>
fn from_str_radix(
str: &str,
radix: u32
) -> Result<DhtLocation, <DhtLocation as Num>::FromStrRadixErr>
Convert from a string and radix (typically 2..=36
). Read more
sourceimpl One for DhtLocation
impl One for DhtLocation
sourcefn one() -> DhtLocation
fn one() -> DhtLocation
Returns the multiplicative identity element of Self
, 1
. Read more
sourceimpl Ord for DhtLocation
impl Ord for DhtLocation
sourcefn cmp(&self, other: &DhtLocation) -> Ordering
fn cmp(&self, other: &DhtLocation) -> Ordering
1.21.0 · sourcefn max(self, other: Self) -> Self
fn max(self, other: Self) -> Self
Compares and returns the maximum of two values. Read more
1.21.0 · sourcefn min(self, other: Self) -> Self
fn min(self, other: Self) -> Self
Compares and returns the minimum of two values. Read more
1.50.0 · sourcefn clamp(self, min: Self, max: Self) -> Self where
Self: PartialOrd<Self>,
fn clamp(self, min: Self, max: Self) -> Self where
Self: PartialOrd<Self>,
Restrict a value to a certain interval. Read more
sourceimpl PartialEq<DhtLocation> for DhtLocation
impl PartialEq<DhtLocation> for DhtLocation
sourcefn eq(&self, other: &DhtLocation) -> bool
fn eq(&self, other: &DhtLocation) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &DhtLocation) -> bool
fn ne(&self, other: &DhtLocation) -> bool
This method tests for !=
.
sourceimpl PartialOrd<DhtLocation> for DhtLocation
impl PartialOrd<DhtLocation> for DhtLocation
sourcefn partial_cmp(&self, other: &DhtLocation) -> Option<Ordering>
fn partial_cmp(&self, other: &DhtLocation) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
sourceimpl Rem<DhtLocation> for DhtLocation
impl Rem<DhtLocation> for DhtLocation
type Output = DhtLocation
type Output = DhtLocation
The resulting type after applying the %
operator.
sourcefn rem(self, rhs: DhtLocation) -> <DhtLocation as Rem<DhtLocation>>::Output
fn rem(self, rhs: DhtLocation) -> <DhtLocation as Rem<DhtLocation>>::Output
Performs the %
operation. Read more
sourceimpl Serialize for DhtLocation
impl Serialize for DhtLocation
sourcefn serialize<__S>(
&self,
__serializer: __S
) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error> where
__S: Serializer,
fn serialize<__S>(
&self,
__serializer: __S
) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error> where
__S: Serializer,
Serialize this value into the given Serde serializer. Read more
sourceimpl Sub<DhtLocation> for DhtLocation
impl Sub<DhtLocation> for DhtLocation
type Output = DhtLocation
type Output = DhtLocation
The resulting type after applying the -
operator.
sourcefn sub(self, rhs: DhtLocation) -> <DhtLocation as Sub<DhtLocation>>::Output
fn sub(self, rhs: DhtLocation) -> <DhtLocation as Sub<DhtLocation>>::Output
Performs the -
operation. Read more
sourceimpl Width for DhtLocation
impl Width for DhtLocation
type Output = u32
fn max_value() -> DhtLocation
fn min_value() -> DhtLocation
sourcefn width(
lower: &DhtLocation,
upper: &DhtLocation
) -> <DhtLocation as Width>::Output
fn width(
lower: &DhtLocation,
upper: &DhtLocation
) -> <DhtLocation as Width>::Output
The result might be infinite depending on the underlying type (think about floating types).
sourceimpl Zero for DhtLocation
impl Zero for DhtLocation
impl Copy for DhtLocation
impl Eq for DhtLocation
impl StructuralEq for DhtLocation
impl StructuralPartialEq for DhtLocation
Auto Trait Implementations
impl RefUnwindSafe for DhtLocation
impl Send for DhtLocation
impl Sync for DhtLocation
impl Unpin for DhtLocation
impl UnwindSafe for DhtLocation
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
impl<SS, SP> SupersetOf<SS> for SP where
SS: SubsetOf<SP>,
impl<SS, SP> SupersetOf<SS> for SP where
SS: SubsetOf<SP>,
fn to_subset(&self) -> Option<SS>
fn to_subset(&self) -> Option<SS>
The inverse inclusion map: attempts to construct self
from the equivalent element of its
superset. Read more
fn is_in_subset(&self) -> bool
fn is_in_subset(&self) -> bool
Checks if self
is actually part of its subset T
(and can be converted to it).
fn to_subset_unchecked(&self) -> SS
fn to_subset_unchecked(&self) -> SS
Use with care! Same as self.to_subset
but without any property checks. Always succeeds.
fn from_subset(element: &SS) -> SP
fn from_subset(element: &SS) -> SP
The inclusion map: converts self
to the equivalent element of its superset.
sourceimpl<Bound> ToInterval<Bound> for Bound where
Bound: Width + Num,
impl<Bound> ToInterval<Bound> for Bound where
Bound: Width + Num,
fn to_interval(self) -> Interval<Bound>
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
fn vzip(self) -> V
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more