Struct jack::Client [−][src]
pub struct Client(_, _, _);
Implementations
Opens a JACK client with the given name and options. If the client is successfully opened,
then Ok(client)
is returned. If there is a failure, then Err(Error::ClientError(status))
will be returned.
Although the client may be successful in opening, there still may be some errors minor
errors when attempting to opening. To access these, check the returned ClientStatus
.
pub fn activate_async<N, P>(
self,
notification_handler: N,
process_handler: P
) -> Result<AsyncClient<N, P>, Error> where
N: 'static + Send + Sync + NotificationHandler,
P: 'static + Send + ProcessHandler,
pub fn activate_async<N, P>(
self,
notification_handler: N,
process_handler: P
) -> Result<AsyncClient<N, P>, Error> where
N: 'static + Send + Sync + NotificationHandler,
P: 'static + Send + ProcessHandler,
Begin processing in real-time using the specified NotificationHandler
and
ProcessHandler
.
The sample rate of the JACK system, as set by the user when jackd was started.
The current CPU load estimated by JACK. It is on a scale of 0.0
to 100.0
.
This is a running average of the time it takes to execute a full process cycle for all clients as a percentage of the real time available per cycle determined by the buffer size and sample rate.
Get the name of the current client. This may differ from the name requested by Client::new
as JACK will may rename a client if necessary (ie: name collision, name too long). The name
will only the be different than the one passed to Client::new
if the ClientStatus
was
NAME_NOT_UNIQUE
.
The current maximum size that will every be passed to the process callback.
Change the buffer size passed to the process callback.
This operation stops the JACK engine process cycle, then calls all registered buffer size callback functions before restarting the process cycle. This will cause a gap in the audio flow, so it should only be done at appropriate stopping points.
Get a String representation of the uuid
of this client.
Remarks
- Allocates & deallocates, not realtime safe.
Get the name of a client by its &str
uuid.
Returns a vector of port names that match the specified arguments
port_name_pattern
- A regular expression used to select ports by name. If None
or zero
lengthed, no selection based on name will be carried out.
type_name_pattern
- A regular expression used to select ports by type. If None
or zero
lengthed, no selection based on type will be carried out. The port type is the same one
returned by PortSpec::jack_port_type()
. For example, AudioIn
and AudioOut
are both of
type "32 bit float mono audio"
.
flags
- A value used to select ports by their flags. Use PortFlags::empty()
for no flag
selection.
Create a new port for the client. This is an object used for moving data of any type in or out of the client. Ports may be connected in various ways.
The port_spec
specifies the IO direction and data type. Oftentimes, the built-in types
(AudioIn
, AudioOut
, MidiIn
, MidiOut
) can be used.
Each port has a short name. The port’s full name contains the name of the client
concatenated with a colon (:) followed by its short name. Port::name_size()
is the maximum
length of the full name. Exceeding that will cause the port registration to fail and return
Err(())
.
The port_name
must be unique among all ports owned by this client. If the name is not
unique, the registration will fail.
Get a Port
by its port name.
pub fn load_internal_client(
&self,
client_name: &str,
client_bin_name: &str,
client_args: &str
) -> Result<InternalClientID, Error>
pub fn load_internal_client(
&self,
client_name: &str,
client_bin_name: &str,
client_args: &str
) -> Result<InternalClientID, Error>
Load a (server) internal client
This call will load a server-internal jack client. Internal clients run inside the jack server process and are provided as .so files by the jack package. Most internal clients provide low level interfaces, so as such are not expected to be needed by regular applications
client_name
is the name the new client will display as on the graph
client_bin_name
is the name of the internal client to load. This is the same as the .so file
being loaded, without its file extension or path.
client_args
is an arbitrary string of parameters passed to the client. These are client specific
This call will return the ID of the new client, needed to unload it again on success. It returns a ClientError on error.
Unload a (server) internal client
This call will unload a server-internal jack client with an ID given from load_internal_client.
client
is the ID to unload
This call will return Ok(())
on success.
It returns a ClientError on error.
The estimated time in frames that has passed since the JACK server began the current process cycle.
The estimated current time in frames. This function is intended for use in other threads
(not the process callback). The return value can be compared with the value of
last_frame_time
to relate time in other threads to JACK time. To obtain better time
information from within the process callback, see ProcessScope
.
TODO
- test
Returns true
if the port port
belongs to this client.
Toggle input monitoring for the port with name port_name
.
Err(Error::PortMonitorError)
is returned on failure.
Only works if the port has the CAN_MONITOR
flag, or else nothing happens.
Establish a connection between two ports by their full name.
When a connection exists, data written to the source port will be available to be read at the destination port.
On failure, either a PortAlreadyConnected
or PortConnectionError
is returned.
Preconditions
- The port types must be identical
- The port flags of the
source_port
must includeIS_OUTPUT
- The port flags of the
destination_port
must includeIS_INPUT
. - Both ports must be owned by active clients.
Establish a connection between two ports.
When a connection exists, data written to the source port will be available to be read at the destination port.
On failure, either a PortAlreadyConnected
or PortConnectionError
is returned.
Preconditions
- The port types must be identical
- The port flags of the
source_port
must includeIS_OUTPUT
- The port flags of the
destination_port
must includeIS_INPUT
. - Both ports must be owned by active clients.
Remove all connections to/from the port.
Remove a connection between two ports.
Remove a connection between two ports.
Expose the underlying ffi pointer.
This is mostly for use within the jack crate itself.
Create a Client
from an ffi pointer.
This is mostly for use within the jack crate itself.
Safety
It is unsafe to create a Client
from a raw pointer.
Trait Implementations
Close the client.