Struct iri_string::types::RiReferenceString

pub struct RiReferenceString<S> { /* fields omitted */ }

An owned string of an absolute IRI possibly with fragment part.

This corresponds to IRI-reference rule in RFC 3987 (and URI-reference rule in RFC 3986). The rule for IRI-reference is IRI / irelative-ref. In other words, this is union of RiString and RiRelativeString.

For details, see the document for RiReferenceStr.

Enabled by alloc or std feature.

Methods

impl<S: Spec> RiReferenceString<S>

pub fn shrink_to_fit(&mut self)

Shrinks the capacity of the inner buffer to match its length.

impl<S: Spec> RiReferenceString<S>

pub fn into_iri(self) -> Result<RiString<S>, RiRelativeString<S>>

Returns the string as RiString, if it is valid as an IRI.

If it is not an IRI, then RiRelativeString is returned as Err(_).

pub fn into_relative_iri(self) -> Result<RiRelativeString<S>, RiString<S>>

Returns the string as RiRelativeString, if it is valid as an IRI.

If it is not an IRI, then RiString is returned as Err(_).

pub fn set_fragment(&mut self, fragment: Option<&RiFragmentStr<S>>)

Sets the fragment part to the given string.

Removes fragment part (and following # character) if None is given.

Methods from Deref<Target = RiReferenceStr<S>>

pub fn as_str(&self) -> &str

Returns &str.

pub fn len(&self) -> usize

Returns the string length.

pub fn is_empty(&self) -> bool

Returns whether the string is empty.

pub fn to_iri(&self) -> Result<&RiStr<S>, &RiRelativeStr<S>>

Returns the string as &RiStr, if it is valid as an IRI.

If it is not an IRI, then &RiRelativeStr is returned as Err(_).

pub fn to_relative_iri(&self) -> Result<&RiRelativeStr<S>, &RiStr<S>>

Returns the string as &RiRelativeStr, if it is valid as an IRI.

If it is not an IRI, then &RiStr is returned as Err(_).

pub fn resolve_against<'a>(
    &'a self,
    base: &RiAbsoluteStr<S>
) -> Cow<'a, RiStr<S>>

Returns resolved IRI against the given base IRI, using strict resolver.

About reference resolution output example, see RFC 3986 section 5.4.

About resolver strictness, see RFC 3986 section 5.4.2:

Some parsers allow the scheme name to be present in a relative reference if it is the same as the base URI scheme. This is considered to be a loophole in prior specifications of partial URI RFC1630. Its use should be avoided but is allowed for backward compatibility.

--- https://tools.ietf.org/html/rfc3986#section-5.4.2

Usual users will want to use strict resolver.

Enabled by alloc or std feature.

pub fn fragment(&self) -> Option<&RiFragmentStr<S>>

Returns the fragment part if exists.

A leading # character is truncated if the fragment part exists.

Examples

If the IRI has a fragment part, Some(_) is returned.

let iri = IriReferenceStr::new("foo://bar/baz?qux=quux#corge")?;
let fragment = IriFragmentStr::new("corge")?;
assert_eq!(iri.fragment(), Some(fragment));

let iri = IriReferenceStr::new("#foo")?;
let fragment = IriFragmentStr::new("foo")?;
assert_eq!(iri.fragment(), Some(fragment));

When the fragment part exists but is empty string, Some(_) is returned.

let iri = IriReferenceStr::new("foo://bar/baz?qux=quux#")?;
let fragment = IriFragmentStr::new("")?;
assert_eq!(iri.fragment(), Some(fragment));

let iri = IriReferenceStr::new("#")?;
let fragment = IriFragmentStr::new("")?;
assert_eq!(iri.fragment(), Some(fragment));

If the IRI has no fragment, None is returned.

let iri = IriReferenceStr::new("foo://bar/baz?qux=quux")?;
assert_eq!(iri.fragment(), None);

let iri = IriReferenceStr::new("")?;
assert_eq!(iri.fragment(), None);

Trait Implementations

impl AsRef<RiReferenceStr<IriSpec>> for RiReferenceString<UriSpec>

fn as_ref(&self) -> &RiReferenceStr<IriSpec>

Performs the conversion.

impl<S: Spec> AsRef<RiReferenceStr<S>> for RiReferenceString<S>

fn as_ref(&self) -> &RiReferenceStr<S>

Performs the conversion.

impl<S: Spec> AsRef<str> for RiReferenceString<S>

fn as_ref(&self) -> &str

Performs the conversion.

impl<S: Spec> Borrow<RiReferenceStr<S>> for RiReferenceString<S>

fn borrow(&self) -> &RiReferenceStr<S>

Immutably borrows from an owned value.

impl<S: Spec> Borrow<str> for RiReferenceString<S>

fn borrow(&self) -> &str

Immutably borrows from an owned value.

impl<S: Spec> Clone for RiReferenceString<S>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<S: Spec> Debug for RiReferenceString<S>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<S: Spec> Deref for RiReferenceString<S>

type Target = RiReferenceStr<S>

The resulting type after dereferencing.

fn deref(&self) -> &RiReferenceStr<S>

Dereferences the value.

impl<'de, S: Spec> Deserialize<'de> for RiReferenceString<S>

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error> where
    D: Deserializer<'de>, 

Deserialize this value from the given Serde deserializer.

impl<S: Spec> Display for RiReferenceString<S>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<S: Spec> Eq for RiReferenceString<S>

impl<'_, S: Spec> From<&'_ RiReferenceStr<S>> for RiReferenceString<S>

fn from(s: &RiReferenceStr<S>) -> Self

Performs the conversion.

impl<S: Spec> From<RiAbsoluteString<S>> for RiReferenceString<S>

fn from(s: RiAbsoluteString<S>) -> RiReferenceString<S>

Performs the conversion.

impl<S: Spec> From<RiReferenceString<S>> for String

fn from(s: RiReferenceString<S>) -> Self

Performs the conversion.

impl<S: Spec> From<RiRelativeString<S>> for RiReferenceString<S>

fn from(s: RiRelativeString<S>) -> RiReferenceString<S>

Performs the conversion.

impl<S: Spec> From<RiString<S>> for RiReferenceString<S>

fn from(s: RiString<S>) -> RiReferenceString<S>

Performs the conversion.

impl<S: Spec> FromStr for RiReferenceString<S>

type Err = Error

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<Self, Self::Err>

Parses a string s to return a value of this type.

impl<S: Spec> Hash for RiReferenceString<S>

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl<S: Spec> Ord for RiReferenceString<S>

fn cmp(&self, other: &Self) -> Ordering

This method returns an [Ordering] between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl<'_, S: Spec, T: Spec> PartialEq<&'_ RiAbsoluteStr<S>> for RiReferenceString<T>

fn eq(&self, o: &&RiAbsoluteStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<&'_ RiReferenceStr<S>> for RiReferenceString<T>

fn eq(&self, o: &&RiReferenceStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<&'_ RiRelativeStr<S>> for RiReferenceString<T>

fn eq(&self, o: &&RiRelativeStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<&'_ RiStr<S>> for RiReferenceString<T>

fn eq(&self, o: &&RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec> PartialEq<&'_ str> for RiReferenceString<S>

fn eq(&self, o: &&str) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<Cow<'_, RiAbsoluteStr<S>>> for RiReferenceString<T>

fn eq(&self, o: &Cow<RiAbsoluteStr<S>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<Cow<'_, RiReferenceStr<S>>> for RiReferenceString<T>

fn eq(&self, o: &Cow<RiReferenceStr<S>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<Cow<'_, RiRelativeStr<S>>> for RiReferenceString<T>

fn eq(&self, o: &Cow<RiRelativeStr<S>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<Cow<'_, RiStr<S>>> for RiReferenceString<T>

fn eq(&self, o: &Cow<RiStr<S>>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec> PartialEq<Cow<'_, str>> for RiReferenceString<S>

fn eq(&self, o: &Cow<str>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteStr<S>> for RiReferenceString<T>

fn eq(&self, o: &RiAbsoluteStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiAbsoluteString<S>> for RiReferenceString<T>

fn eq(&self, o: &RiAbsoluteString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceStr<S>> for RiReferenceString<T>

fn eq(&self, o: &RiReferenceStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<RiReferenceString<S>> for str

fn eq(&self, o: &RiReferenceString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec> PartialEq<RiReferenceString<S>> for &'_ str

fn eq(&self, o: &RiReferenceString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec> PartialEq<RiReferenceString<S>> for Cow<'_, str>

fn eq(&self, o: &RiReferenceString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<RiReferenceString<S>> for String

fn eq(&self, o: &RiReferenceString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for RiAbsoluteStr<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for &'_ RiAbsoluteStr<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for &'_ RiReferenceStr<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for Cow<'_, RiReferenceStr<S>>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for RiRelativeStr<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for &'_ RiRelativeStr<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for Cow<'_, RiRelativeStr<S>>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for RiRelativeString<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for Cow<'_, RiAbsoluteStr<S>>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for RiAbsoluteString<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for RiStr<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for &'_ RiStr<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for Cow<'_, RiStr<S>>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for RiString<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for RiReferenceString<S>

fn eq(&self, other: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiReferenceString<T>> for RiReferenceStr<S>

fn eq(&self, o: &RiReferenceString<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiRelativeStr<S>> for RiReferenceString<T>

fn eq(&self, o: &RiRelativeStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiRelativeString<S>> for RiReferenceString<T>

fn eq(&self, o: &RiRelativeString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiStr<S>> for RiReferenceString<T>

fn eq(&self, o: &RiStr<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec, T: Spec> PartialEq<RiString<S>> for RiReferenceString<T>

fn eq(&self, o: &RiString<S>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<String> for RiReferenceString<S>

fn eq(&self, o: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<S: Spec> PartialEq<str> for RiReferenceString<S>

fn eq(&self, o: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'_, S: Spec, T: Spec> PartialOrd<&'_ RiAbsoluteStr<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &&RiAbsoluteStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<&'_ RiReferenceStr<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &&RiReferenceStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<&'_ RiRelativeStr<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &&RiRelativeStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<&'_ RiStr<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &&RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec> PartialOrd<&'_ str> for RiReferenceString<S>

fn partial_cmp(&self, o: &&str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<Cow<'_, RiAbsoluteStr<S>>> for RiReferenceString<T>

fn partial_cmp(&self, o: &Cow<RiAbsoluteStr<S>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<Cow<'_, RiReferenceStr<S>>> for RiReferenceString<T>

fn partial_cmp(&self, o: &Cow<RiReferenceStr<S>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<Cow<'_, RiRelativeStr<S>>> for RiReferenceString<T>

fn partial_cmp(&self, o: &Cow<RiRelativeStr<S>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<Cow<'_, RiStr<S>>> for RiReferenceString<T>

fn partial_cmp(&self, o: &Cow<RiStr<S>>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec> PartialOrd<Cow<'_, str>> for RiReferenceString<S>

fn partial_cmp(&self, o: &Cow<str>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteStr<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &RiAbsoluteStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiAbsoluteString<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &RiAbsoluteString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceStr<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &RiReferenceStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<RiReferenceString<S>> for str

fn partial_cmp(&self, o: &RiReferenceString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec> PartialOrd<RiReferenceString<S>> for &'_ str

fn partial_cmp(&self, o: &RiReferenceString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec> PartialOrd<RiReferenceString<S>> for Cow<'_, str>

fn partial_cmp(&self, o: &RiReferenceString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<RiReferenceString<S>> for String

fn partial_cmp(&self, o: &RiReferenceString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for RiAbsoluteStr<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for &'_ RiAbsoluteStr<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for &'_ RiReferenceStr<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for Cow<'_, RiReferenceStr<S>>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for RiRelativeStr<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for &'_ RiRelativeStr<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for Cow<'_, RiRelativeStr<S>>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for RiRelativeString<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for Cow<'_, RiAbsoluteStr<S>>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for RiAbsoluteString<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for RiStr<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for &'_ RiStr<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'_, S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for Cow<'_, RiStr<S>>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for RiString<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for RiReferenceString<S>

fn partial_cmp(&self, other: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiReferenceString<T>> for RiReferenceStr<S>

fn partial_cmp(&self, o: &RiReferenceString<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiRelativeStr<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &RiRelativeStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiRelativeString<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &RiRelativeString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiStr<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &RiStr<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec, T: Spec> PartialOrd<RiString<S>> for RiReferenceString<T>

fn partial_cmp(&self, o: &RiString<S>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<String> for RiReferenceString<S>

fn partial_cmp(&self, o: &String) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S: Spec> PartialOrd<str> for RiReferenceString<S>

fn partial_cmp(&self, o: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S> Serialize for RiReferenceString<S>

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
    __S: Serializer, 

Serialize this value into the given Serde serializer.

impl<'_, S: Spec> TryFrom<&'_ str> for RiReferenceString<S>

type Error = Error

The type returned in the event of a conversion error.

fn try_from(s: &str) -> Result<Self, Self::Error>

Performs the conversion.

impl<S: Spec> TryFrom<RiReferenceString<S>> for RiAbsoluteString<S>

type Error = CreationError<RiReferenceString<S>>

The type returned in the event of a conversion error.

fn try_from(s: RiReferenceString<S>) -> Result<Self, Self::Error>

Performs the conversion.

impl<S: Spec> TryFrom<RiReferenceString<S>> for RiString<S>

type Error = CreationError<RiReferenceString<S>>

The type returned in the event of a conversion error.

fn try_from(s: RiReferenceString<S>) -> Result<Self, Self::Error>

Performs the conversion.

impl<S: Spec> TryFrom<RiReferenceString<S>> for RiRelativeString<S>

type Error = CreationError<RiReferenceString<S>>

The type returned in the event of a conversion error.

fn try_from(s: RiReferenceString<S>) -> Result<Self, Self::Error>

Performs the conversion.

impl<S: Spec> TryFrom<String> for RiReferenceString<S>

type Error = CreationError<String>

The type returned in the event of a conversion error.

fn try_from(s: String) -> Result<Self, Self::Error>

Performs the conversion.