Struct MaskEnableFlags 

pub struct MaskEnableFlags { /* private fields */ }

Represents status and configuration flags for alerts

Implementations

impl MaskEnableFlags

pub const CONVERSION_READY: Self

The last measurement has been completed and the data is ready to be read

pub const TIMING_CONTROL_ALERT: Self

Corresponds to the TimingControl pin, can be manually asserted by software

pub const POWER_VALID_ALERT: Self

Corresponds to the PowerValid pin, can be manually asserted by software

pub const WARNING_ALERT_1: Self

Channel 1 has exceeded the warning alert limit

pub const WARNING_ALERT_2: Self

Channel 2 has exceeded the warning alert limit

pub const WARNING_ALERT_3: Self

Channel 3 has exceeded the warning alert limit

pub const SUMMATION_ALERT: Self

The sum of the shunt voltages has exceeded the summation alert limit

pub const CRITICAL_ALERT_1: Self

Channel 1 has exceeded the critical alert limit

pub const CRITICAL_ALERT_2: Self

Channel 2 has exceeded the critical alert limit

pub const CRITICAL_ALERT_3: Self

Channel 3 has exceeded the critical alert limit

pub const CRITICAL_ALERT_LATCH: Self

Critical alert latch enable, if set, the corresponding critical alert pin will be latched

pub const WARNING_ALERT_LATCH: Self

Warning alert latch enable, if set, the corresponding warning alert pin will be latched

pub const SUMMATION_CONTROL_1: Self

Include channel 1 in the summation calculation and stored in the shunt voltage summation register

pub const SUMMATION_CONTROL_2: Self

Include channel 2 in the summation calculation and stored in the shunt voltage summation register

pub const SUMMATION_CONTROL_3: Self

Include channel 3 in the summation calculation and stored in the shunt voltage summation register

pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&self) -> u16

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u16) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u16) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u16) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations

impl Binary for MaskEnableFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for MaskEnableFlags

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

type Output = MaskEnableFlags

The resulting type after applying the & operator.

impl BitAndAssign for MaskEnableFlags

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

impl BitOr for MaskEnableFlags

fn bitor(self, other: MaskEnableFlags) -> Self

Returns the union of the two sets of flags.

type Output = MaskEnableFlags

The resulting type after applying the | operator.

impl BitOrAssign for MaskEnableFlags

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

impl BitXor for MaskEnableFlags

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

type Output = MaskEnableFlags

The resulting type after applying the ^ operator.

impl BitXorAssign for MaskEnableFlags

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

impl Clone for MaskEnableFlags

fn clone(&self) -> MaskEnableFlags

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MaskEnableFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<MaskEnableFlags> for MaskEnableFlags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<MaskEnableFlags> for MaskEnableFlags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator.

impl Hash for MaskEnableFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for MaskEnableFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for MaskEnableFlags

fn not(self) -> Self

Returns the complement of this set of flags.

type Output = MaskEnableFlags

The resulting type after applying the ! operator.

impl Octal for MaskEnableFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for MaskEnableFlags

fn cmp(&self, other: &MaskEnableFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for MaskEnableFlags

fn eq(&self, other: &MaskEnableFlags) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for MaskEnableFlags

fn partial_cmp(&self, other: &MaskEnableFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub for MaskEnableFlags

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

type Output = MaskEnableFlags

The resulting type after applying the - operator.

impl SubAssign for MaskEnableFlags

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

impl UpperHex for MaskEnableFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for MaskEnableFlags

impl Eq for MaskEnableFlags

impl StructuralPartialEq for MaskEnableFlags