Type Definition imxrt1062_ccm::ccr::W

type W = W<u32, CCR>;

Writer for register CCR

Methods

impl W

pub fn oscnt(&mut self) -> OSCNT_W

Bits 0:7 - Oscillator ready counter value. These bits define value of 32KHz counter, that serve as counter for oscillator lock time (count to n+1 ckil's). This is used for oscillator lock time. Current estimation is ~5ms. This counter will be used in ignition sequence and in wake from stop sequence if sbyos bit was defined, to notify that on chip oscillator output is ready for the dpll_ip to use and only then the gate in dpll_ip can be opened.

pub fn cosc_en(&mut self) -> COSC_EN_W

Bit 12 - On chip oscillator enable bit - this bit value is reflected on the output cosc_en

pub fn reg_bypass_count(&mut self) -> REG_BYPASS_COUNT_W

Bits 21:26 - Counter for analog_reg_bypass signal assertion after standby voltage request by PMIC_STBY_REQ

pub fn rbc_en(&mut self) -> RBC_EN_W

Bit 27 - Enable for REG_BYPASS_COUNTER