Skip to main content

SelfRegulationConfig

Struct SelfRegulationConfig 

Source
pub struct SelfRegulationConfig {
    pub enabled: bool,
    pub profile: SelfRegulationProfile,
    pub pause_above: f64,
    pub resume_below: f64,
    pub target_rho: f64,
    pub md_factor: f64,
}
Available on crate feature governor only.
Expand description

Cascade-overridable settings for the self-regulation governor.

Loaded under the self_regulation key. All fields have sensible defaults so an app that sets nothing gets a fully working, default-ON governor.

Fields§

§enabled: bool

Master switch. true (default) -> the runtime builds the governor and threads it into the transports + driver. false -> nothing is built (byte-identical to pre-governor behaviour).

§profile: SelfRegulationProfile

Sizing profile for the AIMD byte budget.

§pause_above: f64

Hysteresis: arm the inbound hold when combined pressure reaches this.

§resume_below: f64

Hysteresis: release the inbound hold when pressure drops to this. Must be strictly less than pause_above (validated; an invalid band falls back to the defaults).

§target_rho: f64

Target utilisation rho for the byte-budget AIMD loop, in (0, 1).

§md_factor: f64

Multiplicative-decrease factor for the byte budget, in (0, 1).

Implementations§

Source§

impl SelfRegulationConfig

Source

pub fn from_cascade() -> Self

Load from the config cascade under the self_regulation key, registering the section so the /config admin endpoint + hot-reload see it.

Falls back to SelfRegulationConfig::default() (default-ON) when the cascade is not initialised or the key is absent.

Source

pub fn hysteresis(&self) -> Hysteresis

Build the Hysteresis band from the config.

An inverted / non-finite band falls back to the defaults (0.80 / 0.65) rather than failing – a bad knob must not wedge the governor.

Source

pub fn byte_budget_config(&self) -> ByteBudgetConfig

Build the ByteBudgetConfig from the profile envelope + overridable target_rho / md_factor. The controller sanitises ranges itself.

Source§

impl SelfRegulationConfig

Source

pub fn build( &self, memory_guard: Arc<MemoryGuard>, ) -> Option<SelfRegulationGovernor>

Construct the SelfRegulationGovernor over a shared memory guard.

Returns None when enabled = false – the caller then builds nothing and the data path stays byte-identical to pre-governor behaviour.

Construction order matters: this is called BEFORE the transports + the engine driver so the produced pressure / budget can be threaded in.

Trait Implementations§

Source§

impl Clone for SelfRegulationConfig

Source§

fn clone(&self) -> SelfRegulationConfig

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for SelfRegulationConfig

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for SelfRegulationConfig

Source§

fn default() -> Self

Returns the “default value” for a type. Read more
Source§

impl<'de> Deserialize<'de> for SelfRegulationConfig

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl Serialize for SelfRegulationConfig

Source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> AnyExt for T
where T: Any + ?Sized,

Source§

fn downcast_ref<T>(this: &Self) -> Option<&T>
where T: Any,

Attempts to downcast this to T behind reference
Source§

fn downcast_mut<T>(this: &mut Self) -> Option<&mut T>
where T: Any,

Attempts to downcast this to T behind mutable reference
Source§

fn downcast_rc<T>(this: Rc<Self>) -> Result<Rc<T>, Rc<Self>>
where T: Any,

Attempts to downcast this to T behind Rc pointer
Source§

fn downcast_arc<T>(this: Arc<Self>) -> Result<Arc<T>, Arc<Self>>
where T: Any,

Attempts to downcast this to T behind Arc pointer
Source§

fn downcast_box<T>(this: Box<Self>) -> Result<Box<T>, Box<Self>>
where T: Any,

Attempts to downcast this to T behind Box pointer
Source§

fn downcast_move<T>(this: Self) -> Option<T>
where T: Any, Self: Sized,

Attempts to downcast owned Self to T, useful only in generic context as a workaround for specialization
Source§

impl<T> AsDebug for T
where T: Debug,

Source§

fn as_debug(&self) -> &dyn Debug

Returns self as a &dyn Debug trait object.
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T, X> CoerceTo<T> for X
where T: CoerceFrom<X> + ?Sized,

Source§

fn coerce_rc_to(self: Rc<X>) -> Rc<T>

Source§

fn coerce_box_to(self: Box<X>) -> Box<T>

Source§

fn coerce_ref_to(&self) -> &T

Source§

fn coerce_mut_to(&mut self) -> &mut T

Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> FromRef<T> for T
where T: Clone,

Source§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
Source§

impl<T> FutureExt for T

Source§

fn with_context(self, otel_cx: Context) -> WithContext<Self>

Attaches the provided Context to this type, returning a WithContext wrapper. Read more
Source§

fn with_current_context(self) -> WithContext<Self>

Attaches the current Context to this type, returning a WithContext wrapper. Read more
Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<T> IntoRequest<T> for T

Source§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
Source§

impl<L> LayerExt<L> for L

Source§

fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>
where L: Layer<S>,

Applies the layer to a service and wraps it in Layered.
Source§

impl<D> OwoColorize for D

Source§

fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>
where C: Color,

Set the foreground color generically Read more
Source§

fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>
where C: Color,

Set the background color generically. Read more
Source§

fn black(&self) -> FgColorDisplay<'_, Black, Self>

Change the foreground color to black
Source§

fn on_black(&self) -> BgColorDisplay<'_, Black, Self>

Change the background color to black
Source§

fn red(&self) -> FgColorDisplay<'_, Red, Self>

Change the foreground color to red
Source§

fn on_red(&self) -> BgColorDisplay<'_, Red, Self>

Change the background color to red
Source§

fn green(&self) -> FgColorDisplay<'_, Green, Self>

Change the foreground color to green
Source§

fn on_green(&self) -> BgColorDisplay<'_, Green, Self>

Change the background color to green
Source§

fn yellow(&self) -> FgColorDisplay<'_, Yellow, Self>

Change the foreground color to yellow
Source§

fn on_yellow(&self) -> BgColorDisplay<'_, Yellow, Self>

Change the background color to yellow
Source§

fn blue(&self) -> FgColorDisplay<'_, Blue, Self>

Change the foreground color to blue
Source§

fn on_blue(&self) -> BgColorDisplay<'_, Blue, Self>

Change the background color to blue
Source§

fn magenta(&self) -> FgColorDisplay<'_, Magenta, Self>

Change the foreground color to magenta
Source§

fn on_magenta(&self) -> BgColorDisplay<'_, Magenta, Self>

Change the background color to magenta
Source§

fn purple(&self) -> FgColorDisplay<'_, Magenta, Self>

Change the foreground color to purple
Source§

fn on_purple(&self) -> BgColorDisplay<'_, Magenta, Self>

Change the background color to purple
Source§

fn cyan(&self) -> FgColorDisplay<'_, Cyan, Self>

Change the foreground color to cyan
Source§

fn on_cyan(&self) -> BgColorDisplay<'_, Cyan, Self>

Change the background color to cyan
Source§

fn white(&self) -> FgColorDisplay<'_, White, Self>

Change the foreground color to white
Source§

fn on_white(&self) -> BgColorDisplay<'_, White, Self>

Change the background color to white
Source§

fn default_color(&self) -> FgColorDisplay<'_, Default, Self>

Change the foreground color to the terminal default
Source§

fn on_default_color(&self) -> BgColorDisplay<'_, Default, Self>

Change the background color to the terminal default
Source§

fn bright_black(&self) -> FgColorDisplay<'_, BrightBlack, Self>

Change the foreground color to bright black
Source§

fn on_bright_black(&self) -> BgColorDisplay<'_, BrightBlack, Self>

Change the background color to bright black
Source§

fn bright_red(&self) -> FgColorDisplay<'_, BrightRed, Self>

Change the foreground color to bright red
Source§

fn on_bright_red(&self) -> BgColorDisplay<'_, BrightRed, Self>

Change the background color to bright red
Source§

fn bright_green(&self) -> FgColorDisplay<'_, BrightGreen, Self>

Change the foreground color to bright green
Source§

fn on_bright_green(&self) -> BgColorDisplay<'_, BrightGreen, Self>

Change the background color to bright green
Source§

fn bright_yellow(&self) -> FgColorDisplay<'_, BrightYellow, Self>

Change the foreground color to bright yellow
Source§

fn on_bright_yellow(&self) -> BgColorDisplay<'_, BrightYellow, Self>

Change the background color to bright yellow
Source§

fn bright_blue(&self) -> FgColorDisplay<'_, BrightBlue, Self>

Change the foreground color to bright blue
Source§

fn on_bright_blue(&self) -> BgColorDisplay<'_, BrightBlue, Self>

Change the background color to bright blue
Source§

fn bright_magenta(&self) -> FgColorDisplay<'_, BrightMagenta, Self>

Change the foreground color to bright magenta
Source§

fn on_bright_magenta(&self) -> BgColorDisplay<'_, BrightMagenta, Self>

Change the background color to bright magenta
Source§

fn bright_purple(&self) -> FgColorDisplay<'_, BrightMagenta, Self>

Change the foreground color to bright purple
Source§

fn on_bright_purple(&self) -> BgColorDisplay<'_, BrightMagenta, Self>

Change the background color to bright purple
Source§

fn bright_cyan(&self) -> FgColorDisplay<'_, BrightCyan, Self>

Change the foreground color to bright cyan
Source§

fn on_bright_cyan(&self) -> BgColorDisplay<'_, BrightCyan, Self>

Change the background color to bright cyan
Source§

fn bright_white(&self) -> FgColorDisplay<'_, BrightWhite, Self>

Change the foreground color to bright white
Source§

fn on_bright_white(&self) -> BgColorDisplay<'_, BrightWhite, Self>

Change the background color to bright white
Source§

fn bold(&self) -> BoldDisplay<'_, Self>

Make the text bold
Source§

fn dimmed(&self) -> DimDisplay<'_, Self>

Make the text dim
Source§

fn italic(&self) -> ItalicDisplay<'_, Self>

Make the text italicized
Source§

fn underline(&self) -> UnderlineDisplay<'_, Self>

Make the text underlined
Make the text blink
Make the text blink (but fast!)
Source§

fn reversed(&self) -> ReversedDisplay<'_, Self>

Swap the foreground and background colors
Source§

fn hidden(&self) -> HiddenDisplay<'_, Self>

Hide the text
Source§

fn strikethrough(&self) -> StrikeThroughDisplay<'_, Self>

Cross out the text
Source§

fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the foreground color at runtime. Only use if you do not know which color will be used at compile-time. If the color is constant, use either OwoColorize::fg or a color-specific method, such as OwoColorize::green, Read more
Source§

fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the background color at runtime. Only use if you do not know what color to use at compile-time. If the color is constant, use either OwoColorize::bg or a color-specific method, such as OwoColorize::on_yellow, Read more
Source§

fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the foreground color to a specific RGB value.
Source§

fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the background color to a specific RGB value.
Source§

fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>

Sets the foreground color to an RGB value.
Source§

fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>

Sets the background color to an RGB value.
Source§

fn style(&self, style: Style) -> Styled<&Self>

Apply a runtime-determined style
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1:

renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Pointable for T

Source§

const ALIGN: usize

The alignment of pointer.
Source§

type Init = T

The type for initializers.
Source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
Source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
Source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
Source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<T> PolicyExt for T
where T: ?Sized,

Source§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns Action::Follow only if self and other return Action::Follow. Read more
Source§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns Action::Follow if either self or other returns Action::Follow. Read more
Source§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> TryIntoValue for T
where T: Serialize,

Source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

Source§

fn vzip(self) -> V

Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more