Skip to main content

Spring

Struct Spring 

Source
pub struct Spring { /* private fields */ }
Expand description

A physical spring policy for spring.

A spring is the counterpart to Transition for values that can be retargeted while they are still moving. A duration-based transition restarts its easing from the value sampled at that instant, which is continuous in position but not in velocity. A spring carries velocity across the retarget, so a value reversed mid-flight decelerates and turns around instead of snapping to a new curve’s initial speed.

Implementations§

Source§

impl Spring

Source

pub const fn new(response: Duration) -> Self

Builds a spring that reaches its target in about response without overshooting it.

response is not a duration in the sense Transition::new means one. A spring has no end to schedule: this is the period one full oscillation would take without damping, which is the scale the motion is felt at rather than the moment it stops. The remaining fraction of a percent keeps settling past it, until it is within the tolerance Self::with_epsilon sets.

A zero response adopts the target on the spot, as a zero duration does for a transition. Say that with Self::with_travel where it is what you mean; a zero here is the degenerate case, defined so an infinitely stiff spring resolves rather than dividing by its own period.

Source

pub const fn with_damping(self, ratio: f32) -> Self

Sets the damping ratio, which is 1.0 — no overshoot — by default.

Below 1.0 the spring passes its target and comes back; above 1.0 it approaches slowly. Overshoot suits a value with room to pass its target and nothing to collide with. A height, an opacity, or anything bounded by the geometry around it should stay at the default.

This is $\zeta$. Internally it is converted to the damping coefficient $c = 2 \zeta \omega_0$ used by the integrator.

§Panics

Panics when ratio is negative or non-finite. Use Self::try_with_damping when the value is not a trusted constant.

Source

pub const fn try_with_damping(self, ratio: f32) -> Result<Self, SpringError>

Checked form of Self::with_damping.

Source

pub const fn with_travel(self, travel: bool) -> Self

Sets whether the spring travels to its target or adopts it on the spot.

A value the pointer is already moving — a panel being dragged by its resize handle — must not lag behind the pointer, so the spring stops travelling for as long as the drag lasts. Retained state stays pinned to the target meanwhile, so travel resumes from the value the drag released rather than from wherever the spring was when it began.

This says at the call that the motion is suspended, and it says it without disturbing the response, damping or tolerance the spring is configured with — which a policy swapped out for the length of the drag would have to restate or discard.

Source

pub const fn with_epsilon(self, epsilon: f32) -> Self

Sets the settling tolerance, expressed in the target’s own units.

The default suits targets that move within a normalized 0..1 range. A spring over pixels settles perceptibly sooner with a coarser tolerance, which also ends the animation frames that the remaining sub-pixel motion would otherwise request.

§Panics

Panics when epsilon is zero, negative, or non-finite. Use Self::try_with_epsilon when the value is not a trusted constant.

Source

pub const fn try_with_epsilon(self, epsilon: f32) -> Result<Self, SpringError>

Checked form of Self::with_epsilon.

Source

pub const fn epsilon(self) -> f32

Returns the settling tolerance in the target’s own units.

Trait Implementations§

Source§

impl Clone for Spring

Source§

fn clone(&self) -> Self

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Copy for Spring

Source§

impl Debug for Spring

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S
where T: Real + Zero + Arithmetics + Clone, Swp: WhitePoint<T>, Dwp: WhitePoint<T>, D: AdaptFrom<S, Swp, Dwp, T>,

Source§

fn adapt_into_using<M>(self, method: M) -> D
where M: TransformMatrix<T>,

👎Deprecated since 0.7.7:

replaced by palette::chromatic_adaptation::AdaptIntoUnclamped

Convert the source color to the destination color using the specified method.
Source§

fn adapt_into(self) -> D

👎Deprecated since 0.7.7:

replaced by palette::chromatic_adaptation::AdaptIntoUnclamped

Convert the source color to the destination color using the bradford method by default.
Source§

impl<T, C> AdaptIntoUnclamped<T> for C
where T: AdaptFromUnclamped<C>,

Source§

type Scalar = <T as AdaptFromUnclamped<C>>::Scalar

The number type that’s used as the color’s components.
Source§

fn adapt_into_unclamped_with<M>(self) -> T

Adapt a color of type Self into a color of type T, using the custom matrix M. Read more
Source§

fn adapt_into_unclamped(self) -> T
where Bradford: LmsToXyz<Self::Scalar> + XyzToLms<Self::Scalar>,

Adapt a color of type Self into a color of type T, using the Bradford matrix. Read more
Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T, C> ArraysFrom<C> for T
where C: IntoArrays<T>,

Source§

fn arrays_from(colors: C) -> T

Cast a collection of colors into a collection of arrays.
Source§

impl<T, C> ArraysInto<C> for T
where C: FromArrays<T>,

Source§

fn arrays_into(self) -> C

Cast this collection of arrays into a collection of colors.
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for U
where T: FromCam16Unclamped<WpParam, U>,

Source§

type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.
Source§

fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>, ) -> T

Converts self into C, using the provided parameters.
Source§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T, C> ComponentsFrom<C> for T
where C: IntoComponents<T>,

Source§

fn components_from(colors: C) -> T

Cast a collection of colors into a collection of color components.
Source§

impl<T, C> ComponentsInto<C> for T

Source§

fn components_into(self) -> C

Cast this collection of color components into a collection of colors. Read more
Source§

impl<T> DynClone for T
where T: Clone,

Source§

fn __clone_box(&self, _: Private) -> *mut ()

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> FromAngle<T> for T

Source§

fn from_angle(angle: T) -> T

Performs a conversion from angle.
Source§

impl<T, U> FromStimulus<U> for T
where U: IntoStimulus<T>,

Source§

fn from_stimulus(other: U) -> T

Converts other into Self, while performing the appropriate scaling, rounding and clamping.
Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> IntoAngle<U> for T
where U: FromAngle<T>,

Source§

fn into_angle(self) -> U

Performs a conversion into T.
Source§

impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for U
where T: Cam16FromUnclamped<WpParam, U>,

Source§

type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.
Source§

fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>, ) -> T

Converts self into C, using the provided parameters.
Source§

impl<T, U> IntoColor<U> for T
where U: FromColor<T>,

Source§

fn into_color(self) -> U

Convert into T with values clamped to the color defined bounds Read more
Source§

impl<T, U> IntoColorUnclamped<U> for T
where U: FromColorUnclamped<T>,

Source§

fn into_color_unclamped(self) -> U

Convert into T. The resulting color might be invalid in its color space Read more
Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<T> IntoStimulus<T> for T

Source§

fn into_stimulus(self) -> T

Converts self into T, while performing the appropriate scaling, rounding and clamping.
Source§

impl<T> Pointable for T

Source§

const ALIGN: usize

The alignment of pointer.
Source§

type Init = T

The type for initializers.
Source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
Source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
Source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
Source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, C> TryComponentsInto<C> for T
where C: TryFromComponents<T>,

Source§

type Error = <C as TryFromComponents<T>>::Error

The error for when try_into_colors fails to cast.
Source§

fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>

Try to cast this collection of color components into a collection of colors. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T, U> TryIntoColor<U> for T
where U: TryFromColor<T>,

Source§

fn try_into_color(self) -> Result<U, OutOfBounds<U>>

Convert into T, returning ok if the color is inside of its defined range, otherwise an OutOfBounds error is returned which contains the unclamped color. Read more
Source§

impl<C, U> UintsFrom<C> for U
where C: IntoUints<U>,

Source§

fn uints_from(colors: C) -> U

Cast a collection of colors into a collection of unsigned integers.
Source§

impl<C, U> UintsInto<C> for U
where C: FromUints<U>,

Source§

fn uints_into(self) -> C

Cast this collection of unsigned integers into a collection of colors.
Source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

Source§

fn vzip(self) -> V

Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more