[−]Struct gpgme::AuditLogFlags
Upstream documentation:
gpgme_op_getauditlog
Methods
impl AuditLogFlags
pub const DEFAULT: AuditLogFlags
pub const HTML: AuditLogFlags
pub const DIAG: AuditLogFlags
pub const WITH_HELP: AuditLogFlags
pub const fn empty() -> AuditLogFlags
Returns an empty set of flags
pub const fn all() -> AuditLogFlags
Returns the set containing all flags.
pub const fn bits(&self) -> c_uint
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: c_uint) -> Option<AuditLogFlags>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: c_uint) -> AuditLogFlags
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const unsafe fn from_bits_unchecked(bits: c_uint) -> AuditLogFlags
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
pub const fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: AuditLogFlags) -> bool
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: AuditLogFlags) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: AuditLogFlags)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: AuditLogFlags)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: AuditLogFlags)
Toggles the specified flags in-place.
pub fn set(&mut self, other: AuditLogFlags, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Extend<AuditLogFlags> for AuditLogFlags
fn extend<T: IntoIterator<Item = AuditLogFlags>>(&mut self, iterator: T)
impl Clone for AuditLogFlags
fn clone(&self) -> AuditLogFlags
fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Copy for AuditLogFlags
impl Eq for AuditLogFlags
impl Ord for AuditLogFlags
fn cmp(&self, other: &AuditLogFlags) -> Ordering
fn max(self, other: Self) -> Self
1.21.0[src]
fn min(self, other: Self) -> Self
1.21.0[src]
fn clamp(self, min: Self, max: Self) -> Self
[src]
impl PartialEq<AuditLogFlags> for AuditLogFlags
fn eq(&self, other: &AuditLogFlags) -> bool
fn ne(&self, other: &AuditLogFlags) -> bool
impl PartialOrd<AuditLogFlags> for AuditLogFlags
fn partial_cmp(&self, other: &AuditLogFlags) -> Option<Ordering>
fn lt(&self, other: &AuditLogFlags) -> bool
fn le(&self, other: &AuditLogFlags) -> bool
fn gt(&self, other: &AuditLogFlags) -> bool
fn ge(&self, other: &AuditLogFlags) -> bool
impl Debug for AuditLogFlags
impl Sub<AuditLogFlags> for AuditLogFlags
type Output = AuditLogFlags
The resulting type after applying the -
operator.
fn sub(self, other: AuditLogFlags) -> AuditLogFlags
Returns the set difference of the two sets of flags.
impl SubAssign<AuditLogFlags> for AuditLogFlags
fn sub_assign(&mut self, other: AuditLogFlags)
Disables all flags enabled in the set.
impl Not for AuditLogFlags
type Output = AuditLogFlags
The resulting type after applying the !
operator.
fn not(self) -> AuditLogFlags
Returns the complement of this set of flags.
impl BitAnd<AuditLogFlags> for AuditLogFlags
type Output = AuditLogFlags
The resulting type after applying the &
operator.
fn bitand(self, other: AuditLogFlags) -> AuditLogFlags
Returns the intersection between the two sets of flags.
impl BitOr<AuditLogFlags> for AuditLogFlags
type Output = AuditLogFlags
The resulting type after applying the |
operator.
fn bitor(self, other: AuditLogFlags) -> AuditLogFlags
Returns the union of the two sets of flags.
impl BitXor<AuditLogFlags> for AuditLogFlags
type Output = AuditLogFlags
The resulting type after applying the ^
operator.
fn bitxor(self, other: AuditLogFlags) -> AuditLogFlags
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<AuditLogFlags> for AuditLogFlags
fn bitand_assign(&mut self, other: AuditLogFlags)
Disables all flags disabled in the set.
impl BitOrAssign<AuditLogFlags> for AuditLogFlags
fn bitor_assign(&mut self, other: AuditLogFlags)
Adds the set of flags.
impl BitXorAssign<AuditLogFlags> for AuditLogFlags
fn bitxor_assign(&mut self, other: AuditLogFlags)
Toggles the set of flags.
impl Hash for AuditLogFlags
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
impl StructuralPartialEq for AuditLogFlags
impl StructuralEq for AuditLogFlags
impl FromIterator<AuditLogFlags> for AuditLogFlags
fn from_iter<T: IntoIterator<Item = AuditLogFlags>>(
iterator: T
) -> AuditLogFlags
iterator: T
) -> AuditLogFlags
impl Octal for AuditLogFlags
impl Binary for AuditLogFlags
impl LowerHex for AuditLogFlags
impl UpperHex for AuditLogFlags
Auto Trait Implementations
impl Send for AuditLogFlags
impl Sync for AuditLogFlags
impl Unpin for AuditLogFlags
impl UnwindSafe for AuditLogFlags
impl RefUnwindSafe for AuditLogFlags
Blanket Implementations
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = !
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src where
Scheme: ApproxScheme,
[src]
Scheme: ApproxScheme,
type Err = NoError
The error type produced by a failed conversion.
fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>
[src]
impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src where
Dst: ApproxFrom<Src, Scheme>,
Scheme: ApproxScheme,
[src]
Dst: ApproxFrom<Src, Scheme>,
Scheme: ApproxScheme,
type Err = <Dst as ApproxFrom<Src, Scheme>>::Err
The error type produced by a failed conversion.
fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>
[src]
impl<Src> ValueFrom<Src> for Src
[src]
type Err = NoError
The error type produced by a failed conversion.
fn value_from(src: Src) -> Result<Src, <Src as ValueFrom<Src>>::Err>
[src]
impl<Src, Dst> ValueInto<Dst> for Src where
Dst: ValueFrom<Src>,
[src]
Dst: ValueFrom<Src>,
type Err = <Dst as ValueFrom<Src>>::Err
The error type produced by a failed conversion.
fn value_into(self) -> Result<Dst, <Src as ValueInto<Dst>>::Err>
[src]
impl<T> ConvUtil for T
[src]
fn approx_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,
[src]
Self: ApproxInto<Dst, DefaultApprox>,
fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err> where
Scheme: ApproxScheme,
Self: ApproxInto<Dst, Scheme>,
[src]
Scheme: ApproxScheme,
Self: ApproxInto<Dst, Scheme>,
fn into_as<Dst>(self) -> Dst where
Self: Into<Dst>,
[src]
Self: Into<Dst>,
fn try_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: TryInto<Dst>,
[src]
Self: TryInto<Dst>,
fn value_as<Dst>(self) -> Result<Dst, Self::Err> where
Self: ValueInto<Dst>,
[src]
Self: ValueInto<Dst>,
impl<T, Dst> ConvAsUtil<Dst> for T
[src]
fn approx(self) -> Result<Dst, Self::Err> where
Self: ApproxInto<Dst, DefaultApprox>,
[src]
Self: ApproxInto<Dst, DefaultApprox>,
fn approx_by<Scheme>(self) -> Result<Dst, Self::Err> where
Scheme: ApproxScheme,
Self: ApproxInto<Dst, Scheme>,
[src]
Scheme: ApproxScheme,
Self: ApproxInto<Dst, Scheme>,
impl<Src> TryFrom<Src> for Src
[src]
type Err = NoError
The error type produced by a failed conversion.
fn try_from(src: Src) -> Result<Src, <Src as TryFrom<Src>>::Err>
[src]
impl<Src, Dst> TryInto<Dst> for Src where
Dst: TryFrom<Src>,
[src]
Dst: TryFrom<Src>,