Struct NodeNetworkConfig 

#[non_exhaustive]
pub struct NodeNetworkConfig {
    pub create_pod_range: bool,
    pub pod_range: String,
    pub pod_ipv4_cidr_block: String,
    pub enable_private_nodes: Option<bool>,
    pub network_performance_config: Option<NetworkPerformanceConfig>,
    pub pod_cidr_overprovision_config: Option<PodCIDROverprovisionConfig>,
    pub additional_node_network_configs: Vec<AdditionalNodeNetworkConfig>,
    pub additional_pod_network_configs: Vec<AdditionalPodNetworkConfig>,
    pub pod_ipv4_range_utilization: f64,
    pub subnetwork: String,
    /* private fields */
}

Parameters for node pool-level network config.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

create_pod_range: bool

Input only. Whether to create a new range for pod IPs in this node pool. Defaults are provided for pod_range and pod_ipv4_cidr_block if they are not specified.

If neither create_pod_range or pod_range are specified, the cluster-level default (ip_allocation_policy.cluster_ipv4_cidr_block) is used.

Only applicable if ip_allocation_policy.use_ip_aliases is true.

This field cannot be changed after the node pool has been created.

pod_range: String

The ID of the secondary range for pod IPs. If create_pod_range is true, this ID is used for the new range. If create_pod_range is false, uses an existing secondary range with this ID.

Only applicable if ip_allocation_policy.use_ip_aliases is true.

This field cannot be changed after the node pool has been created.

pod_ipv4_cidr_block: String

The IP address range for pod IPs in this node pool.

Only applicable if create_pod_range is true.

Set to blank to have a range chosen with the default size.

Set to /netmask (e.g. /14) to have a range chosen with a specific netmask.

Set to a CIDR notation (e.g. 10.96.0.0/14) to pick a specific range to use.

Only applicable if ip_allocation_policy.use_ip_aliases is true.

This field cannot be changed after the node pool has been created.

enable_private_nodes: Option<bool>

Whether nodes have internal IP addresses only. If enable_private_nodes is not specified, then the value is derived from [Cluster.NetworkConfig.default_enable_private_nodes][]

network_performance_config: Option<NetworkPerformanceConfig>

Network bandwidth tier configuration.

pod_cidr_overprovision_config: Option<PodCIDROverprovisionConfig>

[PRIVATE FIELD] Pod CIDR size overprovisioning config for the nodepool.

Pod CIDR size per node depends on max_pods_per_node. By default, the value of max_pods_per_node is rounded off to next power of 2 and we then double that to get the size of pod CIDR block per node. Example: max_pods_per_node of 30 would result in 64 IPs (/26).

This config can disable the doubling of IPs (we still round off to next power of 2) Example: max_pods_per_node of 30 will result in 32 IPs (/27) when overprovisioning is disabled.

additional_node_network_configs: Vec<AdditionalNodeNetworkConfig>

We specify the additional node networks for this node pool using this list. Each node network corresponds to an additional interface

additional_pod_network_configs: Vec<AdditionalPodNetworkConfig>

We specify the additional pod networks for this node pool using this list. Each pod network corresponds to an additional alias IP range for the node

pod_ipv4_range_utilization: f64

Output only. The utilization of the IPv4 range for the pod. The ratio is Usage/[Total number of IPs in the secondary range], Usage=numNodesnumZonespodIPsPerNode.

subnetwork: String

Output only. The subnetwork path for the node pool. Format: projects/{project}/regions/{region}/subnetworks/{subnetwork} If the cluster is associated with multiple subnetworks, the subnetwork for the node pool is picked based on the IP utilization during node pool creation and is immutable.

Implementations

impl NodeNetworkConfig

pub fn new() -> Self

pub fn set_create_pod_range<T: Into<bool>>(self, v: T) -> Self

Sets the value of create_pod_range.

pub fn set_pod_range<T: Into<String>>(self, v: T) -> Self

Sets the value of pod_range.

pub fn set_pod_ipv4_cidr_block<T: Into<String>>(self, v: T) -> Self

Sets the value of pod_ipv4_cidr_block.

pub fn set_enable_private_nodes<T>(self, v: T) -> Self

where T: Into<bool>,

Sets the value of enable_private_nodes.

pub fn set_or_clear_enable_private_nodes<T>(self, v: Option<T>) -> Self

where T: Into<bool>,

Sets or clears the value of enable_private_nodes.

pub fn set_network_performance_config<T>(self, v: T) -> Self

where T: Into<NetworkPerformanceConfig>,

Sets the value of network_performance_config.

pub fn set_or_clear_network_performance_config<T>(self, v: Option<T>) -> Self

where T: Into<NetworkPerformanceConfig>,

Sets or clears the value of network_performance_config.

pub fn set_pod_cidr_overprovision_config<T>(self, v: T) -> Self

where T: Into<PodCIDROverprovisionConfig>,

Sets the value of pod_cidr_overprovision_config.

pub fn set_or_clear_pod_cidr_overprovision_config<T>(self, v: Option<T>) -> Self

where T: Into<PodCIDROverprovisionConfig>,

Sets or clears the value of pod_cidr_overprovision_config.

pub fn set_additional_node_network_configs<T, V>(self, v: T) -> Self

where T: IntoIterator<Item = V>, V: Into<AdditionalNodeNetworkConfig>,

Sets the value of additional_node_network_configs.

pub fn set_additional_pod_network_configs<T, V>(self, v: T) -> Self

where T: IntoIterator<Item = V>, V: Into<AdditionalPodNetworkConfig>,

Sets the value of additional_pod_network_configs.

pub fn set_pod_ipv4_range_utilization<T: Into<f64>>(self, v: T) -> Self

Sets the value of pod_ipv4_range_utilization.

pub fn set_subnetwork<T: Into<String>>(self, v: T) -> Self

Sets the value of subnetwork.

Trait Implementations

impl Clone for NodeNetworkConfig

fn clone(&self) -> NodeNetworkConfig

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for NodeNetworkConfig

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for NodeNetworkConfig

fn default() -> NodeNetworkConfig

Returns the “default value” for a type.

impl Message for NodeNetworkConfig

fn typename() -> &'static str

The typename of this message.

impl PartialEq for NodeNetworkConfig

fn eq(&self, other: &NodeNetworkConfig) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for NodeNetworkConfig