Struct CSGMesh

pub struct CSGMesh { /* private fields */ }

core class CSGMesh inherits CSGPrimitive (unsafe).

Official documentation

See the documentation of this class in the Godot engine’s official documentation. The method descriptions are generated from it and typically contain code samples in GDScript, not Rust.

Memory management

Non reference counted objects such as the ones of this type are usually owned by the engine.

CSGMesh is a reference-only type. Persistent references can only exist in the unsafe Ref<CSGMesh> form.

In the cases where Rust code owns an object of this type, for example if the object was just created on the Rust side and not passed to the engine yet, ownership should be either given to the engine or the object must be manually destroyed using Ref::free, or Ref::queue_free if it is a Node.

Class hierarchy

CSGMesh inherits methods from:

• CSGPrimitive
• CSGShape
• GeometryInstance
• VisualInstance
• Spatial
• Node
• Object

Safety

All types in the Godot API have “interior mutability” in Rust parlance. To enforce that the official thread-safety guidelines are followed, the typestate pattern is used in the Ref and TRef smart pointers, and the Instance API. The typestate Access in these types tracks whether the access is unique, shared, or exclusive to the current thread. For more information, see the type-level documentation on Ref.

Implementations

impl CSGMesh

pub fn new() -> Ref<Self, Unique>

Creates a new instance of this object.

Because this type is not reference counted, the lifetime of the returned object is not automatically managed.

Immediately after creation, the object is owned by the caller, and can be passed to the engine (in which case the engine will be responsible for destroying the object) or destroyed manually using Ref::free, or preferably Ref::queue_free if it is a Node.

pub fn material(&self) -> Option<Ref<Material, Shared>>

pub fn mesh(&self) -> Option<Ref<Mesh, Shared>>

pub fn set_material(&self, material: impl AsArg<Material>)

pub fn set_mesh(&self, mesh: impl AsArg<Mesh>)

Methods from Deref<Target = CSGPrimitive>

pub fn is_inverting_faces(&self) -> bool

pub fn set_invert_faces(&self, invert_faces: bool)

Methods from Deref<Target = CSGShape>

pub const OPERATION_INTERSECTION: i64 = 1i64

pub const OPERATION_SUBTRACTION: i64 = 2i64

pub const OPERATION_UNION: i64 = 0i64

pub fn collision_layer(&self) -> i64

pub fn get_collision_layer_bit(&self, bit: i64) -> bool

pub fn collision_mask(&self) -> i64

pub fn get_collision_mask_bit(&self, bit: i64) -> bool

pub fn get_meshes(&self) -> VariantArray

pub fn operation(&self) -> Operation

pub fn snap(&self) -> f64

pub fn is_calculating_tangents(&self) -> bool

pub fn is_root_shape(&self) -> bool

pub fn is_using_collision(&self) -> bool

pub fn set_calculate_tangents(&self, enabled: bool)

pub fn set_collision_layer(&self, layer: i64)

pub fn set_collision_layer_bit(&self, bit: i64, value: bool)

pub fn set_collision_mask(&self, mask: i64)

pub fn set_collision_mask_bit(&self, bit: i64, value: bool)

pub fn set_operation(&self, operation: i64)

pub fn set_snap(&self, snap: f64)

pub fn set_use_collision(&self, operation: bool)

Methods from Deref<Target = GeometryInstance>

pub const FLAG_DRAW_NEXT_FRAME_IF_VISIBLE: i64 = 1i64

pub const FLAG_MAX: i64 = 2i64

pub const FLAG_USE_BAKED_LIGHT: i64 = 0i64

pub const LIGHTMAP_SCALE_1X: i64 = 0i64

pub const LIGHTMAP_SCALE_2X: i64 = 1i64

pub const LIGHTMAP_SCALE_4X: i64 = 2i64

pub const LIGHTMAP_SCALE_8X: i64 = 3i64

pub const LIGHTMAP_SCALE_MAX: i64 = 4i64

pub const SHADOW_CASTING_SETTING_DOUBLE_SIDED: i64 = 2i64

pub const SHADOW_CASTING_SETTING_OFF: i64 = 0i64

pub const SHADOW_CASTING_SETTING_ON: i64 = 1i64

pub const SHADOW_CASTING_SETTING_SHADOWS_ONLY: i64 = 3i64

pub fn cast_shadows_setting(&self) -> ShadowCastingSetting

The selected shadow casting flag. See [enum ShadowCastingSetting] for possible values.

pub fn extra_cull_margin(&self) -> f64

The extra distance added to the GeometryInstance’s bounding box ([AABB]) to increase its cull box.

pub fn flag(&self, flag: i64) -> bool

If true, this GeometryInstance will be used when baking lights using a GIProbe or BakedLightmap.

pub fn generate_lightmap(&self) -> bool

pub fn lightmap_scale(&self) -> LightmapScale

pub fn lod_max_distance(&self) -> f64

The GeometryInstance’s max LOD distance. Note: This property currently has no effect.

pub fn lod_max_hysteresis(&self) -> f64

The GeometryInstance’s max LOD margin. Note: This property currently has no effect.

pub fn lod_min_distance(&self) -> f64

The GeometryInstance’s min LOD distance. Note: This property currently has no effect.

pub fn lod_min_hysteresis(&self) -> f64

The GeometryInstance’s min LOD margin. Note: This property currently has no effect.

pub fn material_override(&self) -> Option<Ref<Material, Shared>>

The material override for the whole geometry. If a material is assigned to this property, it will be used instead of any material set in any material slot of the mesh.

pub fn set_cast_shadows_setting(&self, shadow_casting_setting: i64)

The selected shadow casting flag. See [enum ShadowCastingSetting] for possible values.

pub fn set_custom_aabb(&self, aabb: Aabb)

Overrides the bounding box of this node with a custom one. To remove it, set an [AABB] with all fields set to zero.

pub fn set_extra_cull_margin(&self, margin: f64)

The extra distance added to the GeometryInstance’s bounding box ([AABB]) to increase its cull box.

pub fn set_flag(&self, flag: i64, value: bool)

If true, this GeometryInstance will be used when baking lights using a GIProbe or BakedLightmap.

pub fn set_generate_lightmap(&self, enabled: bool)

pub fn set_lightmap_scale(&self, scale: i64)

pub fn set_lod_max_distance(&self, mode: f64)

The GeometryInstance’s max LOD distance. Note: This property currently has no effect.

pub fn set_lod_max_hysteresis(&self, mode: f64)

The GeometryInstance’s max LOD margin. Note: This property currently has no effect.

pub fn set_lod_min_distance(&self, mode: f64)

The GeometryInstance’s min LOD distance. Note: This property currently has no effect.

pub fn set_lod_min_hysteresis(&self, mode: f64)

The GeometryInstance’s min LOD margin. Note: This property currently has no effect.

pub fn set_material_override(&self, material: impl AsArg<Material>)

The material override for the whole geometry. If a material is assigned to this property, it will be used instead of any material set in any material slot of the mesh.

Methods from Deref<Target = VisualInstance>

pub fn get_aabb(&self) -> Aabb

Returns the [AABB] (also known as the bounding box) for this VisualInstance. See also [method get_transformed_aabb].

pub fn get_base(&self) -> Rid

Returns the RID of the resource associated with this VisualInstance. For example, if the Node is a MeshInstance, this will return the RID of the associated Mesh.

pub fn get_instance(&self) -> Rid

Returns the RID of this instance. This RID is the same as the RID returned by [method VisualServer.instance_create]. This RID is needed if you want to call VisualServer functions directly on this VisualInstance.

pub fn layer_mask(&self) -> i64

The render layer(s) this VisualInstance is drawn on. This object will only be visible for Cameras whose cull mask includes the render object this VisualInstance is set to.

pub fn get_layer_mask_bit(&self, layer: i64) -> bool

Returns true when the specified layer is enabled in [member layers] and false otherwise.

pub fn get_transformed_aabb(&self) -> Aabb

Returns the transformed [AABB] (also known as the bounding box) for this VisualInstance. Transformed in this case means the [AABB] plus the position, rotation, and scale of the Spatial’s Transform. See also [method get_aabb].

pub fn set_base(&self, base: Rid)

Sets the resource that is instantiated by this VisualInstance, which changes how the engine handles the VisualInstance under the hood. Equivalent to [method VisualServer.instance_set_base].

pub fn set_layer_mask(&self, mask: i64)

The render layer(s) this VisualInstance is drawn on. This object will only be visible for Cameras whose cull mask includes the render object this VisualInstance is set to.

pub fn set_layer_mask_bit(&self, layer: i64, enabled: bool)

Enables a particular layer in [member layers].

Methods from Deref<Target = Spatial>

pub const NOTIFICATION_ENTER_WORLD: i64 = 41i64

pub const NOTIFICATION_EXIT_WORLD: i64 = 42i64

pub const NOTIFICATION_TRANSFORM_CHANGED: i64 = 2_000i64

pub const NOTIFICATION_VISIBILITY_CHANGED: i64 = 43i64

pub fn force_update_transform(&self)

Forces the transform to update. Transform changes in physics are not instant for performance reasons. Transforms are accumulated and then set. Use this if you need an up-to-date transform when doing physics operations.

pub fn gizmo(&self) -> Option<Ref<SpatialGizmo, Shared>>

The SpatialGizmo for this node. Used for example in EditorSpatialGizmo as custom visualization and editing handles in Editor.

pub fn global_transform(&self) -> Transform

World space (global) Transform of this node.

pub fn get_parent_spatial(&self) -> Option<Ref<Spatial, Shared>>

Returns the parent Spatial, or an empty Object if no parent exists or parent is not of type Spatial.

pub fn rotation(&self) -> Vector3

Rotation part of the local transformation in radians, specified in terms of YXZ-Euler angles in the format (X angle, Y angle, Z angle). Note: In the mathematical sense, rotation is a matrix and not a vector. The three Euler angles, which are the three independent parameters of the Euler-angle parametrization of the rotation matrix, are stored in a Vector3 data structure not because the rotation is a vector, but only because Vector3 exists as a convenient data-structure to store 3 floating-point numbers. Therefore, applying affine operations on the rotation “vector” is not meaningful.

pub fn rotation_degrees(&self) -> Vector3

Rotation part of the local transformation in degrees, specified in terms of YXZ-Euler angles in the format (X angle, Y angle, Z angle).

pub fn scale(&self) -> Vector3

Scale part of the local transformation.

pub fn transform(&self) -> Transform

Local space Transform of this node, with respect to the parent node.

pub fn translation(&self) -> Vector3

Local translation of this node.

pub fn get_world(&self) -> Option<Ref<World, Shared>>

Returns the current World resource this Spatial node is registered to.

pub fn global_rotate(&self, axis: Vector3, angle: f64)

Rotates the global (world) transformation around axis, a unit Vector3, by specified angle in radians. The rotation axis is in global coordinate system.

pub fn global_scale(&self, scale: Vector3)

Scales the global (world) transformation by the given Vector3 scale factors.

pub fn global_translate(&self, offset: Vector3)

Moves the global (world) transformation by Vector3 offset. The offset is in global coordinate system.

pub fn hide(&self)

Disables rendering of this node. Changes [member visible] to false.

pub fn is_local_transform_notification_enabled(&self) -> bool

Returns whether node notifies about its local transformation changes. Spatial will not propagate this by default.

pub fn is_scale_disabled(&self) -> bool

Returns whether this node uses a scale of (1, 1, 1) or its local transformation scale.

pub fn is_set_as_toplevel(&self) -> bool

Returns whether this node is set as Toplevel, that is whether it ignores its parent nodes transformations.

pub fn is_transform_notification_enabled(&self) -> bool

Returns whether the node notifies about its global and local transformation changes. Spatial will not propagate this by default.

pub fn is_visible(&self) -> bool

If true, this node is drawn. The node is only visible if all of its antecedents are visible as well (in other words, [method is_visible_in_tree] must return true).

pub fn is_visible_in_tree(&self) -> bool

Returns true if the node is present in the SceneTree, its [member visible] property is true and all its antecedents are also visible. If any antecedent is hidden, this node will not be visible in the scene tree.

pub fn look_at(&self, target: Vector3, up: Vector3)

Rotates itself so that the local -Z axis points towards the target position. The transform will first be rotated around the given up vector, and then fully aligned to the target by a further rotation around an axis perpendicular to both the target and up vectors. Operations take place in global space.

pub fn look_at_from_position( &self, position: Vector3, target: Vector3, up: Vector3, )

Moves the node to the specified position, and then rotates itself to point toward the target as per [method look_at]. Operations take place in global space.

pub fn orthonormalize(&self)

Resets this node’s transformations (like scale, skew and taper) preserving its rotation and translation by performing Gram-Schmidt orthonormalization on this node’s Transform.

pub fn rotate(&self, axis: Vector3, angle: f64)

Rotates the local transformation around axis, a unit Vector3, by specified angle in radians.

pub fn rotate_object_local(&self, axis: Vector3, angle: f64)

Rotates the local transformation around axis, a unit Vector3, by specified angle in radians. The rotation axis is in object-local coordinate system.

pub fn rotate_x(&self, angle: f64)

Rotates the local transformation around the X axis by angle in radians.

pub fn rotate_y(&self, angle: f64)

Rotates the local transformation around the Y axis by angle in radians.

pub fn rotate_z(&self, angle: f64)

Rotates the local transformation around the Z axis by angle in radians.

pub fn scale_object_local(&self, scale: Vector3)

Scales the local transformation by given 3D scale factors in object-local coordinate system.

pub fn set_as_toplevel(&self, enable: bool)

Makes the node ignore its parents transformations. Node transformations are only in global space.

pub fn set_disable_scale(&self, disable: bool)

Sets whether the node uses a scale of (1, 1, 1) or its local transformation scale. Changes to the local transformation scale are preserved.

pub fn set_gizmo(&self, gizmo: impl AsArg<SpatialGizmo>)

The SpatialGizmo for this node. Used for example in EditorSpatialGizmo as custom visualization and editing handles in Editor.

pub fn set_global_transform(&self, global: Transform)

World space (global) Transform of this node.

pub fn set_identity(&self)

Reset all transformations for this node (sets its Transform to the identity matrix).

pub fn set_ignore_transform_notification(&self, enabled: bool)

Sets whether the node ignores notification that its transformation (global or local) changed.

pub fn set_notify_local_transform(&self, enable: bool)

Sets whether the node notifies about its local transformation changes. Spatial will not propagate this by default.

pub fn set_notify_transform(&self, enable: bool)

Sets whether the node notifies about its global and local transformation changes. Spatial will not propagate this by default.

pub fn set_rotation(&self, euler: Vector3)

Rotation part of the local transformation in radians, specified in terms of YXZ-Euler angles in the format (X angle, Y angle, Z angle). Note: In the mathematical sense, rotation is a matrix and not a vector. The three Euler angles, which are the three independent parameters of the Euler-angle parametrization of the rotation matrix, are stored in a Vector3 data structure not because the rotation is a vector, but only because Vector3 exists as a convenient data-structure to store 3 floating-point numbers. Therefore, applying affine operations on the rotation “vector” is not meaningful.

pub fn set_rotation_degrees(&self, euler_degrees: Vector3)

Rotation part of the local transformation in degrees, specified in terms of YXZ-Euler angles in the format (X angle, Y angle, Z angle).

pub fn set_scale(&self, scale: Vector3)

Scale part of the local transformation.

pub fn set_transform(&self, local: Transform)

Local space Transform of this node, with respect to the parent node.

pub fn set_translation(&self, translation: Vector3)

Local translation of this node.

pub fn set_visible(&self, visible: bool)

If true, this node is drawn. The node is only visible if all of its antecedents are visible as well (in other words, [method is_visible_in_tree] must return true).

pub fn show(&self)

Enables rendering of this node. Changes [member visible] to true.

pub fn to_global(&self, local_point: Vector3) -> Vector3

Transforms local_point from this node’s local space to world space.

pub fn to_local(&self, global_point: Vector3) -> Vector3

Transforms global_point from world space to this node’s local space.

pub fn translate(&self, offset: Vector3)

Changes the node’s position by the given offset Vector3. Note that the translation offset is affected by the node’s scale, so if scaled by e.g. (10, 1, 1), a translation by an offset of (2, 0, 0) would actually add 20 (2 * 10) to the X coordinate.

pub fn translate_object_local(&self, offset: Vector3)

Changes the node’s position by the given offset Vector3 in local space.

pub fn update_gizmo(&self)

Updates the SpatialGizmo of this node.

Methods from Deref<Target = Node>

pub const DUPLICATE_GROUPS: i64 = 2i64

pub const DUPLICATE_SCRIPTS: i64 = 4i64

pub const DUPLICATE_SIGNALS: i64 = 1i64

pub const DUPLICATE_USE_INSTANCING: i64 = 8i64

pub const NOTIFICATION_APP_PAUSED: i64 = 1_015i64

pub const NOTIFICATION_APP_RESUMED: i64 = 1_014i64

pub const NOTIFICATION_CRASH: i64 = 1_012i64

pub const NOTIFICATION_DRAG_BEGIN: i64 = 21i64

pub const NOTIFICATION_DRAG_END: i64 = 22i64

pub const NOTIFICATION_ENTER_TREE: i64 = 10i64

pub const NOTIFICATION_EXIT_TREE: i64 = 11i64

pub const NOTIFICATION_INSTANCED: i64 = 20i64

pub const NOTIFICATION_INTERNAL_PHYSICS_PROCESS: i64 = 26i64

pub const NOTIFICATION_INTERNAL_PROCESS: i64 = 25i64

pub const NOTIFICATION_MOVED_IN_PARENT: i64 = 12i64

pub const NOTIFICATION_OS_IME_UPDATE: i64 = 1_013i64

pub const NOTIFICATION_OS_MEMORY_WARNING: i64 = 1_009i64

pub const NOTIFICATION_PARENTED: i64 = 18i64

pub const NOTIFICATION_PATH_CHANGED: i64 = 23i64

pub const NOTIFICATION_PAUSED: i64 = 14i64

pub const NOTIFICATION_PHYSICS_PROCESS: i64 = 16i64

pub const NOTIFICATION_POST_ENTER_TREE: i64 = 27i64

pub const NOTIFICATION_PROCESS: i64 = 17i64

pub const NOTIFICATION_READY: i64 = 13i64

pub const NOTIFICATION_TRANSLATION_CHANGED: i64 = 1_010i64

pub const NOTIFICATION_UNPARENTED: i64 = 19i64

pub const NOTIFICATION_UNPAUSED: i64 = 15i64

pub const NOTIFICATION_WM_ABOUT: i64 = 1_011i64

pub const NOTIFICATION_WM_FOCUS_IN: i64 = 1_004i64

pub const NOTIFICATION_WM_FOCUS_OUT: i64 = 1_005i64

pub const NOTIFICATION_WM_GO_BACK_REQUEST: i64 = 1_007i64

pub const NOTIFICATION_WM_MOUSE_ENTER: i64 = 1_002i64

pub const NOTIFICATION_WM_MOUSE_EXIT: i64 = 1_003i64

pub const NOTIFICATION_WM_QUIT_REQUEST: i64 = 1_006i64

pub const NOTIFICATION_WM_UNFOCUS_REQUEST: i64 = 1_008i64

pub const PAUSE_MODE_INHERIT: i64 = 0i64

pub const PAUSE_MODE_PROCESS: i64 = 2i64

pub const PAUSE_MODE_STOP: i64 = 1i64

pub fn add_child(&self, node: impl AsArg<Node>, legible_unique_name: bool)

Sample code is GDScript unless otherwise noted.

Adds a child node. Nodes can have any number of children, but every child must have a unique name. Child nodes are automatically deleted when the parent node is deleted, so an entire scene can be removed by deleting its topmost node. If legible_unique_name is true, the child node will have an human-readable name based on the name of the node being instanced instead of its type. Note: If the child node already has a parent, the function will fail. Use [method remove_child] first to remove the node from its current parent. For example:

if child_node.get_parent():
    child_node.get_parent().remove_child(child_node)
add_child(child_node)

Note: If you want a child to be persisted to a PackedScene, you must set [member owner] in addition to calling [method add_child]. This is typically relevant for [url=https://godot.readthedocs.io/en/latest/tutorials/misc/running_code_in_the_editor.html]tool scripts[/url] and [url=https://godot.readthedocs.io/en/latest/tutorials/plugins/editor/index.html]editor plugins[/url]. If [method add_child] is called without setting [member owner], the newly added Node will not be visible in the scene tree, though it will be visible in the 2D/3D view.

Default Arguments

• legible_unique_name - false

pub fn add_child_below_node( &self, node: impl AsArg<Node>, child_node: impl AsArg<Node>, legible_unique_name: bool, )

Adds child_node as a child. The child is placed below the given node in the list of children. If legible_unique_name is true, the child node will have an human-readable name based on the name of the node being instanced instead of its type.

Default Arguments

• legible_unique_name - false

pub fn add_to_group(&self, group: impl Into<GodotString>, persistent: bool)

Adds the node to a group. Groups are helpers to name and organize a subset of nodes, for example “enemies” or “collectables”. A node can be in any number of groups. Nodes can be assigned a group at any time, but will not be added until they are inside the scene tree (see [method is_inside_tree]). See notes in the description, and the group methods in SceneTree. The persistent option is used when packing node to PackedScene and saving to file. Non-persistent groups aren’t stored.

Default Arguments

• persistent - false

pub fn can_process(&self) -> bool

Returns true if the node can process while the scene tree is paused (see [member pause_mode]). Always returns true if the scene tree is not paused, and false if the node is not in the tree.

pub fn duplicate(&self, flags: i64) -> Option<Ref<Node, Shared>>

Duplicates the node, returning a new node. You can fine-tune the behavior using the flags (see [enum DuplicateFlags]). Note: It will not work properly if the node contains a script with constructor arguments (i.e. needs to supply arguments to [method Object._init] method). In that case, the node will be duplicated without a script.

Default Arguments

• flags - 15

pub fn find_node( &self, mask: impl Into<GodotString>, recursive: bool, owned: bool, ) -> Option<Ref<Node, Shared>>

Finds a descendant of this node whose name matches mask as in [method String.match] (i.e. case-sensitive, but "*" matches zero or more characters and "?" matches any single character except "."). Note: It does not match against the full path, just against individual node names. If owned is true, this method only finds nodes whose owner is this node. This is especially important for scenes instantiated through a script, because those scenes don’t have an owner. Note: As this method walks through all the descendants of the node, it is the slowest way to get a reference to another node. Whenever possible, consider using [method get_node] instead. To avoid using [method find_node] too often, consider caching the node reference into a variable.

Default Arguments

• recursive - true
• owned - true

pub fn find_parent( &self, mask: impl Into<GodotString>, ) -> Option<Ref<Node, Shared>>

Finds the first parent of the current node whose name matches mask as in [method String.match] (i.e. case-sensitive, but "*" matches zero or more characters and "?" matches any single character except "."). Note: It does not match against the full path, just against individual node names. Note: As this method walks upwards in the scene tree, it can be slow in large, deeply nested scene trees. Whenever possible, consider using [method get_node] instead. To avoid using [method find_parent] too often, consider caching the node reference into a variable.

pub fn get_child(&self, idx: i64) -> Option<Ref<Node, Shared>>

Returns a child node by its index (see [method get_child_count]). This method is often used for iterating all children of a node. To access a child node via its name, use [method get_node].

pub fn get_child_count(&self) -> i64

Returns the number of child nodes.

pub fn get_children(&self) -> VariantArray

Returns an array of references to node’s children.

pub fn custom_multiplayer(&self) -> Option<Ref<MultiplayerAPI, Shared>>

The override to the default MultiplayerAPI. Set to null to use the default SceneTree one.

pub fn filename(&self) -> GodotString

When a scene is instanced from a file, its topmost node contains the filename from which it was loaded.

pub fn get_groups(&self) -> VariantArray

Returns an array listing the groups that the node is a member of.

pub fn get_index(&self) -> i64

Returns the node’s index, i.e. its position among the siblings of its parent.

pub fn multiplayer(&self) -> Option<Ref<MultiplayerAPI, Shared>>

The MultiplayerAPI instance associated with this node. Either the [member custom_multiplayer], or the default SceneTree one (if inside tree).

pub fn name(&self) -> GodotString

The name of the node. This name is unique among the siblings (other child nodes from the same parent). When set to an existing name, the node will be automatically renamed.

pub fn get_network_master(&self) -> i64

Returns the peer ID of the network master for this node. See [method set_network_master].

pub fn get_node(&self, path: impl Into<NodePath>) -> Option<Ref<Node, Shared>>

Sample code is GDScript unless otherwise noted.

Fetches a node. The NodePath can be either a relative path (from the current node) or an absolute path (in the scene tree) to a node. If the path does not exist, a null instance is returned and an error is logged. Attempts to access methods on the return value will result in an “Attempt to call on a null instance.” error. Note: Fetching absolute paths only works when the node is inside the scene tree (see [method is_inside_tree]). Example: Assume your current node is Character and the following tree:

/root
/root/Character
/root/Character/Sword
/root/Character/Backpack/Dagger
/root/MyGame
/root/Swamp/Alligator
/root/Swamp/Mosquito
/root/Swamp/Goblin

Possible paths are:

get_node("Sword")
get_node("Backpack/Dagger")
get_node("../Swamp/Alligator")
get_node("/root/MyGame")

pub fn get_node_and_resource(&self, path: impl Into<NodePath>) -> VariantArray

Sample code is GDScript unless otherwise noted.

Fetches a node and one of its resources as specified by the NodePath’s subname (e.g. Area2D/CollisionShape2D:shape). If several nested resources are specified in the NodePath, the last one will be fetched. The return value is an array of size 3: the first index points to the Node (or null if not found), the second index points to the Resource (or null if not found), and the third index is the remaining NodePath, if any. For example, assuming that Area2D/CollisionShape2D is a valid node and that its shape property has been assigned a RectangleShape2D resource, one could have this kind of output:

print(get_node_and_resource("Area2D/CollisionShape2D")) # [[CollisionShape2D:1161], Null, ]
print(get_node_and_resource("Area2D/CollisionShape2D:shape")) # [[CollisionShape2D:1161], [RectangleShape2D:1156], ]
print(get_node_and_resource("Area2D/CollisionShape2D:shape:extents")) # [[CollisionShape2D:1161], [RectangleShape2D:1156], :extents]

pub fn get_node_or_null( &self, path: impl Into<NodePath>, ) -> Option<Ref<Node, Shared>>

Similar to [method get_node], but does not log an error if path does not point to a valid Node.

pub fn owner(&self) -> Option<Ref<Node, Shared>>

The node owner. A node can have any other node as owner (as long as it is a valid parent, grandparent, etc. ascending in the tree). When saving a node (using PackedScene), all the nodes it owns will be saved with it. This allows for the creation of complex SceneTrees, with instancing and subinstancing.

pub fn get_parent(&self) -> Option<Ref<Node, Shared>>

Returns the parent node of the current node, or a null instance if the node lacks a parent.

pub fn get_path(&self) -> NodePath

Returns the absolute path of the current node. This only works if the current node is inside the scene tree (see [method is_inside_tree]).

pub fn get_path_to(&self, node: impl AsArg<Node>) -> NodePath

Returns the relative NodePath from this node to the specified node. Both nodes must be in the same scene or the function will fail.

pub fn pause_mode(&self) -> PauseMode

Pause mode. How the node will behave if the SceneTree is paused.

pub fn get_physics_process_delta_time(&self) -> f64

Returns the time elapsed since the last physics-bound frame (see [method _physics_process]). This is always a constant value in physics processing unless the frames per second is changed via [member Engine.iterations_per_second].

pub fn get_position_in_parent(&self) -> i64

Returns the node’s order in the scene tree branch. For example, if called on the first child node the position is 0.

pub fn get_process_delta_time(&self) -> f64

Returns the time elapsed (in seconds) since the last process callback. This value may vary from frame to frame.

pub fn process_priority(&self) -> i64

The node’s priority in the execution order of the enabled processing callbacks (i.e. [constant NOTIFICATION_PROCESS], [constant NOTIFICATION_PHYSICS_PROCESS] and their internal counterparts). Nodes whose process priority value is [i]lower[/i] will have their processing callbacks executed first.

pub fn get_scene_instance_load_placeholder(&self) -> bool

Returns true if this is an instance load placeholder. See InstancePlaceholder.

pub fn get_tree(&self) -> Option<Ref<SceneTree, Shared>>

Returns the SceneTree that contains this node.

pub fn get_viewport(&self) -> Option<Ref<Viewport, Shared>>

Returns the node’s Viewport.

pub fn has_node(&self, path: impl Into<NodePath>) -> bool

Returns true if the node that the NodePath points to exists.

pub fn has_node_and_resource(&self, path: impl Into<NodePath>) -> bool

Returns true if the NodePath points to a valid node and its subname points to a valid resource, e.g. Area2D/CollisionShape2D:shape. Properties with a non-Resource type (e.g. nodes or primitive math types) are not considered resources.

pub fn is_a_parent_of(&self, node: impl AsArg<Node>) -> bool

Returns true if the given node is a direct or indirect child of the current node.

pub fn is_displayed_folded(&self) -> bool

Returns true if the node is folded (collapsed) in the Scene dock.

pub fn is_greater_than(&self, node: impl AsArg<Node>) -> bool

Returns true if the given node occurs later in the scene hierarchy than the current node.

pub fn is_in_group(&self, group: impl Into<GodotString>) -> bool

Returns true if this node is in the specified group. See notes in the description, and the group methods in SceneTree.

pub fn is_inside_tree(&self) -> bool

Returns true if this node is currently inside a SceneTree.

pub fn is_network_master(&self) -> bool

Returns true if the local system is the master of this node.

pub fn is_physics_processing(&self) -> bool

Returns true if physics processing is enabled (see [method set_physics_process]).

pub fn is_physics_processing_internal(&self) -> bool

Returns true if internal physics processing is enabled (see [method set_physics_process_internal]).

pub fn is_processing(&self) -> bool

Returns true if processing is enabled (see [method set_process]).

pub fn is_processing_input(&self) -> bool

Returns true if the node is processing input (see [method set_process_input]).

pub fn is_processing_internal(&self) -> bool

Returns true if internal processing is enabled (see [method set_process_internal]).

pub fn is_processing_unhandled_input(&self) -> bool

Returns true if the node is processing unhandled input (see [method set_process_unhandled_input]).

pub fn is_processing_unhandled_key_input(&self) -> bool

Returns true if the node is processing unhandled key input (see [method set_process_unhandled_key_input]).

pub fn move_child(&self, child_node: impl AsArg<Node>, to_position: i64)

Moves a child node to a different position (order) among the other children. Since calls, signals, etc are performed by tree order, changing the order of children nodes may be useful.

pub fn print_stray_nodes(&self)

Prints all stray nodes (nodes outside the SceneTree). Used for debugging. Works only in debug builds.

pub fn print_tree(&self)

Sample code is GDScript unless otherwise noted.

Prints the tree to stdout. Used mainly for debugging purposes. This version displays the path relative to the current node, and is good for copy/pasting into the [method get_node] function. Example output:

TheGame
TheGame/Menu
TheGame/Menu/Label
TheGame/Menu/Camera2D
TheGame/SplashScreen
TheGame/SplashScreen/Camera2D

pub fn print_tree_pretty(&self)

Sample code is GDScript unless otherwise noted.

Similar to [method print_tree], this prints the tree to stdout. This version displays a more graphical representation similar to what is displayed in the scene inspector. It is useful for inspecting larger trees. Example output:

 ┖╴TheGame
    ┠╴Menu
    ┃  ┠╴Label
    ┃  ┖╴Camera2D
    ┖╴SplashScreen
       ┖╴Camera2D

pub fn propagate_call( &self, method: impl Into<GodotString>, args: VariantArray, parent_first: bool, )

Calls the given method (if present) with the arguments given in args on this node and recursively on all its children. If the parent_first argument is true, the method will be called on the current node first, then on all its children. If parent_first is false, the children will be called first.

Default Arguments

• args - [ ]
• parent_first - false

pub fn propagate_notification(&self, what: i64)

Notifies the current node and all its children recursively by calling [method Object.notification] on all of them.

pub fn queue_free(&self)

Queues a node for deletion at the end of the current frame. When deleted, all of its child nodes will be deleted as well. This method ensures it’s safe to delete the node, contrary to [method Object.free]. Use [method Object.is_queued_for_deletion] to check whether a node will be deleted at the end of the frame.

pub fn raise(&self)

Moves this node to the bottom of parent node’s children hierarchy. This is often useful in GUIs (Control nodes), because their order of drawing depends on their order in the tree, i.e. the further they are on the node list, the higher they are drawn. After using raise, a Control will be drawn on top of their siblings.

pub fn remove_and_skip(&self)

Removes a node and sets all its children as children of the parent node (if it exists). All event subscriptions that pass by the removed node will be unsubscribed.

pub fn remove_child(&self, node: impl AsArg<Node>)

Removes a child node. The node is NOT deleted and must be deleted manually.

pub fn remove_from_group(&self, group: impl Into<GodotString>)

Removes a node from a group. See notes in the description, and the group methods in SceneTree.

pub fn replace_by(&self, node: impl AsArg<Node>, keep_data: bool)

Replaces a node in a scene by the given one. Subscriptions that pass through this node will be lost.

Default Arguments

• keep_data - false

pub fn request_ready(&self)

Requests that _ready be called again. Note that the method won’t be called immediately, but is scheduled for when the node is added to the scene tree again (see [method _ready]). _ready is called only for the node which requested it, which means that you need to request ready for each child if you want them to call _ready too (in which case, _ready will be called in the same order as it would normally).

pub fn rpc( &self, method: impl Into<GodotString>, varargs: &[Variant], ) -> Variant

Sends a remote procedure call request for the given method to peers on the network (and locally), optionally sending all additional arguments as arguments to the method called by the RPC. The call request will only be received by nodes with the same NodePath, including the exact same node name. Behaviour depends on the RPC configuration for the given method, see [method rpc_config]. Methods are not exposed to RPCs by default. See also [method rset] and [method rset_config] for properties. Returns an empty Variant. Note: You can only safely use RPCs on clients after you received the connected_to_server signal from the SceneTree. You also need to keep track of the connection state, either by the SceneTree signals like server_disconnected or by checking SceneTree.network_peer.get_connection_status() == CONNECTION_CONNECTED.

pub fn rpc_config(&self, method: impl Into<GodotString>, mode: i64)

Changes the RPC mode for the given method to the given mode. See [enum MultiplayerAPI.RPCMode]. An alternative is annotating methods and properties with the corresponding keywords (remote, master, puppet, remotesync, mastersync, puppetsync). By default, methods are not exposed to networking (and RPCs). See also [method rset] and [method rset_config] for properties.

pub fn rpc_id( &self, peer_id: i64, method: impl Into<GodotString>, varargs: &[Variant], ) -> Variant

Sends a [method rpc] to a specific peer identified by peer_id (see [method NetworkedMultiplayerPeer.set_target_peer]). Returns an empty Variant.

pub fn rpc_unreliable( &self, method: impl Into<GodotString>, varargs: &[Variant], ) -> Variant

Sends a [method rpc] using an unreliable protocol. Returns an empty Variant.

pub fn rpc_unreliable_id( &self, peer_id: i64, method: impl Into<GodotString>, varargs: &[Variant], ) -> Variant

Sends a [method rpc] to a specific peer identified by peer_id using an unreliable protocol (see [method NetworkedMultiplayerPeer.set_target_peer]). Returns an empty Variant.

pub fn rset(&self, property: impl Into<GodotString>, value: impl OwnedToVariant)

Remotely changes a property’s value on other peers (and locally). Behaviour depends on the RPC configuration for the given property, see [method rset_config]. See also [method rpc] for RPCs for methods, most information applies to this method as well.

pub fn rset_config(&self, property: impl Into<GodotString>, mode: i64)

Changes the RPC mode for the given property to the given mode. See [enum MultiplayerAPI.RPCMode]. An alternative is annotating methods and properties with the corresponding keywords (remote, master, puppet, remotesync, mastersync, puppetsync). By default, properties are not exposed to networking (and RPCs). See also [method rpc] and [method rpc_config] for methods.

pub fn rset_id( &self, peer_id: i64, property: impl Into<GodotString>, value: impl OwnedToVariant, )

Remotely changes the property’s value on a specific peer identified by peer_id (see [method NetworkedMultiplayerPeer.set_target_peer]).

pub fn rset_unreliable( &self, property: impl Into<GodotString>, value: impl OwnedToVariant, )

Remotely changes the property’s value on other peers (and locally) using an unreliable protocol.

pub fn rset_unreliable_id( &self, peer_id: i64, property: impl Into<GodotString>, value: impl OwnedToVariant, )

Remotely changes property’s value on a specific peer identified by peer_id using an unreliable protocol (see [method NetworkedMultiplayerPeer.set_target_peer]).

pub fn set_custom_multiplayer(&self, api: impl AsArg<MultiplayerAPI>)

The override to the default MultiplayerAPI. Set to null to use the default SceneTree one.

pub fn set_display_folded(&self, fold: bool)

Sets the folded state of the node in the Scene dock.

pub fn set_filename(&self, filename: impl Into<GodotString>)

When a scene is instanced from a file, its topmost node contains the filename from which it was loaded.

pub fn set_name(&self, name: impl Into<GodotString>)

The name of the node. This name is unique among the siblings (other child nodes from the same parent). When set to an existing name, the node will be automatically renamed.

pub fn set_network_master(&self, id: i64, recursive: bool)

Sets the node’s network master to the peer with the given peer ID. The network master is the peer that has authority over the node on the network. Useful in conjunction with the master and puppet keywords. Inherited from the parent node by default, which ultimately defaults to peer ID 1 (the server). If recursive, the given peer is recursively set as the master for all children of this node.

Default Arguments

• recursive - true

pub fn set_owner(&self, owner: impl AsArg<Node>)

The node owner. A node can have any other node as owner (as long as it is a valid parent, grandparent, etc. ascending in the tree). When saving a node (using PackedScene), all the nodes it owns will be saved with it. This allows for the creation of complex SceneTrees, with instancing and subinstancing.

pub fn set_pause_mode(&self, mode: i64)

Pause mode. How the node will behave if the SceneTree is paused.

pub fn set_physics_process(&self, enable: bool)

Enables or disables physics (i.e. fixed framerate) processing. When a node is being processed, it will receive a [constant NOTIFICATION_PHYSICS_PROCESS] at a fixed (usually 60 FPS, see [member Engine.iterations_per_second] to change) interval (and the [method _physics_process] callback will be called if exists). Enabled automatically if [method _physics_process] is overridden. Any calls to this before [method _ready] will be ignored.

pub fn set_physics_process_internal(&self, enable: bool)

Enables or disables internal physics for this node. Internal physics processing happens in isolation from the normal [method _physics_process] calls and is used by some nodes internally to guarantee proper functioning even if the node is paused or physics processing is disabled for scripting ([method set_physics_process]). Only useful for advanced uses to manipulate built-in nodes’ behaviour.

pub fn set_process(&self, enable: bool)

Enables or disables processing. When a node is being processed, it will receive a [constant NOTIFICATION_PROCESS] on every drawn frame (and the [method _process] callback will be called if exists). Enabled automatically if [method _process] is overridden. Any calls to this before [method _ready] will be ignored.

pub fn set_process_input(&self, enable: bool)

Enables or disables input processing. This is not required for GUI controls! Enabled automatically if [method _input] is overridden. Any calls to this before [method _ready] will be ignored.

pub fn set_process_internal(&self, enable: bool)

Enables or disabled internal processing for this node. Internal processing happens in isolation from the normal [method _process] calls and is used by some nodes internally to guarantee proper functioning even if the node is paused or processing is disabled for scripting ([method set_process]). Only useful for advanced uses to manipulate built-in nodes’ behaviour.

pub fn set_process_priority(&self, priority: i64)

The node’s priority in the execution order of the enabled processing callbacks (i.e. [constant NOTIFICATION_PROCESS], [constant NOTIFICATION_PHYSICS_PROCESS] and their internal counterparts). Nodes whose process priority value is [i]lower[/i] will have their processing callbacks executed first.

pub fn set_process_unhandled_input(&self, enable: bool)

Enables unhandled input processing. This is not required for GUI controls! It enables the node to receive all input that was not previously handled (usually by a Control). Enabled automatically if [method _unhandled_input] is overridden. Any calls to this before [method _ready] will be ignored.

pub fn set_process_unhandled_key_input(&self, enable: bool)

Enables unhandled key input processing. Enabled automatically if [method _unhandled_key_input] is overridden. Any calls to this before [method _ready] will be ignored.

pub fn set_scene_instance_load_placeholder(&self, load_placeholder: bool)

Sets whether this is an instance load placeholder. See InstancePlaceholder.

pub fn update_configuration_warning(&self)

Updates the warning displayed for this node in the Scene Dock. Use [method _get_configuration_warning] to setup the warning message to display.

Methods from Deref<Target = Object>

pub const CONNECT_DEFERRED: i64 = 1i64

pub const CONNECT_ONESHOT: i64 = 4i64

pub const CONNECT_PERSIST: i64 = 2i64

pub const CONNECT_REFERENCE_COUNTED: i64 = 8i64

pub const NOTIFICATION_POSTINITIALIZE: i64 = 0i64

pub const NOTIFICATION_PREDELETE: i64 = 1i64

pub fn add_user_signal( &self, signal: impl Into<GodotString>, arguments: VariantArray, )

Adds a user-defined signal. Arguments are optional, but can be added as an [Array] of dictionaries, each containing name: String and type: int (see [enum Variant.Type]) entries.

Default Arguments

• arguments - [ ]

pub unsafe fn call( &self, method: impl Into<GodotString>, varargs: &[Variant], ) -> Variant

Sample code is GDScript unless otherwise noted.

Calls the method on the object and returns the result. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example:

call("set", "position", Vector2(42.0, 0.0))

Note: In C#, the method name must be specified as snake_case if it is defined by a built-in Godot node. This doesn’t apply to user-defined methods where you should use the same convention as in the C# source (typically PascalCase).

Safety

This function bypasses Rust’s static type checks (aliasing, thread boundaries, calls to free(), …).

pub unsafe fn call_deferred( &self, method: impl Into<GodotString>, varargs: &[Variant], ) -> Variant

Sample code is GDScript unless otherwise noted.

Calls the method on the object during idle time. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example:

call_deferred("set", "position", Vector2(42.0, 0.0))

Note: In C#, the method name must be specified as snake_case if it is defined by a built-in Godot node. This doesn’t apply to user-defined methods where you should use the same convention as in the C# source (typically PascalCase).

Safety

This function bypasses Rust’s static type checks (aliasing, thread boundaries, calls to free(), …).

pub unsafe fn callv( &self, method: impl Into<GodotString>, arg_array: VariantArray, ) -> Variant

Sample code is GDScript unless otherwise noted.

Calls the method on the object and returns the result. Contrarily to [method call], this method does not support a variable number of arguments but expects all parameters to be via a single [Array].

callv("set", [ "position", Vector2(42.0, 0.0) ])

Safety

This function bypasses Rust’s static type checks (aliasing, thread boundaries, calls to free(), …).

pub fn can_translate_messages(&self) -> bool

Returns true if the object can translate strings. See [method set_message_translation] and [method tr].

pub fn connect( &self, signal: impl Into<GodotString>, target: impl AsArg<Object>, method: impl Into<GodotString>, binds: VariantArray, flags: i64, ) -> GodotResult

Sample code is GDScript unless otherwise noted.

Connects a signal to a method on a target object. Pass optional binds to the call as an [Array] of parameters. These parameters will be passed to the method after any parameter used in the call to [method emit_signal]. Use flags to set deferred or one-shot connections. See [enum ConnectFlags] constants. A signal can only be connected once to a method. It will throw an error if already connected, unless the signal was connected with [constant CONNECT_REFERENCE_COUNTED]. To avoid this, first, use [method is_connected] to check for existing connections. If the target is destroyed in the game’s lifecycle, the connection will be lost. Examples:

connect("pressed", self, "_on_Button_pressed") # BaseButton signal
connect("text_entered", self, "_on_LineEdit_text_entered") # LineEdit signal
connect("hit", self, "_on_Player_hit", [ weapon_type, damage ]) # User-defined signal

An example of the relationship between binds passed to [method connect] and parameters used when calling [method emit_signal]:

connect("hit", self, "_on_Player_hit", [ weapon_type, damage ]) # weapon_type and damage are passed last
emit_signal("hit", "Dark lord", 5) # "Dark lord" and 5 are passed first
func _on_Player_hit(hit_by, level, weapon_type, damage):
    print("Hit by %s (lvl %d) with weapon %s for %d damage" % [hit_by, level, weapon_type, damage])

Default Arguments

• binds - [ ]
• flags - 0

pub fn disconnect( &self, signal: impl Into<GodotString>, target: impl AsArg<Object>, method: impl Into<GodotString>, )

Disconnects a signal from a method on the given target. If you try to disconnect a connection that does not exist, the method will throw an error. Use [method is_connected] to ensure that the connection exists.

pub fn emit_signal( &self, signal: impl Into<GodotString>, varargs: &[Variant], ) -> Variant

Sample code is GDScript unless otherwise noted.

Emits the given signal. The signal must exist, so it should be a built-in signal of this class or one of its parent classes, or a user-defined signal. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example:

emit_signal("hit", weapon_type, damage)
emit_signal("game_over")

pub fn get(&self, property: impl Into<GodotString>) -> Variant

Returns the Variant value of the given property. If the property doesn’t exist, this will return null. Note: In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn’t apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase).

pub fn get_class(&self) -> GodotString

Returns the object’s class as a String.

pub fn get_incoming_connections(&self) -> VariantArray

Returns an [Array] of dictionaries with information about signals that are connected to the object. Each Dictionary contains three String entries:

• source is a reference to the signal emitter.
• signal_name is the name of the connected signal.
• method_name is the name of the method to which the signal is connected.

pub fn get_indexed(&self, property: impl Into<NodePath>) -> Variant

Gets the object’s property indexed by the given NodePath. The node path should be relative to the current object and can use the colon character (:) to access nested properties. Examples: "position:x" or "material:next_pass:blend_mode".

pub fn get_instance_id(&self) -> i64

Returns the object’s unique instance ID. This ID can be saved in EncodedObjectAsID, and can be used to retrieve the object instance with [method @GDScript.instance_from_id].

pub fn get_meta(&self, name: impl Into<GodotString>) -> Variant

Returns the object’s metadata entry for the given name.

pub fn get_meta_list(&self) -> StringArray

Returns the object’s metadata as a [PoolStringArray].

pub fn get_method_list(&self) -> VariantArray

Returns the object’s methods and their signatures as an [Array].

pub fn get_property_list(&self) -> VariantArray

Returns the object’s property list as an [Array] of dictionaries. Each property’s Dictionary contain at least name: String and type: int (see [enum Variant.Type]) entries. Optionally, it can also include hint: int (see [enum PropertyHint]), hint_string: String, and usage: int (see [enum PropertyUsageFlags]).

pub fn get_script(&self) -> Option<Ref<Reference, Shared>>

Returns the object’s Script instance, or null if none is assigned.

pub fn get_signal_connection_list( &self, signal: impl Into<GodotString>, ) -> VariantArray

Returns an [Array] of connections for the given signal.

pub fn get_signal_list(&self) -> VariantArray

Returns the list of signals as an [Array] of dictionaries.

pub fn has_meta(&self, name: impl Into<GodotString>) -> bool

Returns true if a metadata entry is found with the given name.

pub fn has_method(&self, method: impl Into<GodotString>) -> bool

Returns true if the object contains the given method.

pub fn has_signal(&self, signal: impl Into<GodotString>) -> bool

Returns true if the given signal exists.

pub fn has_user_signal(&self, signal: impl Into<GodotString>) -> bool

Returns true if the given user-defined signal exists. Only signals added using [method add_user_signal] are taken into account.

pub fn is_blocking_signals(&self) -> bool

Returns true if signal emission blocking is enabled.

pub fn is_class(&self, class: impl Into<GodotString>) -> bool

Returns true if the object inherits from the given class.

pub fn is_connected( &self, signal: impl Into<GodotString>, target: impl AsArg<Object>, method: impl Into<GodotString>, ) -> bool

Returns true if a connection exists for a given signal, target, and method.

pub fn is_queued_for_deletion(&self) -> bool

Returns true if the [method Node.queue_free] method was called for the object.

pub fn notification(&self, what: i64, reversed: bool)

Send a given notification to the object, which will also trigger a call to the [method _notification] method of all classes that the object inherits from. If reversed is true, [method _notification] is called first on the object’s own class, and then up to its successive parent classes. If reversed is false, [method _notification] is called first on the highest ancestor (Object itself), and then down to its successive inheriting classes.

Default Arguments

• reversed - false

pub fn property_list_changed_notify(&self)

Notify the editor that the property list has changed, so that editor plugins can take the new values into account. Does nothing on export builds.

pub fn remove_meta(&self, name: impl Into<GodotString>)

Removes a given entry from the object’s metadata. See also [method set_meta].

pub fn set(&self, property: impl Into<GodotString>, value: impl OwnedToVariant)

Assigns a new value to the given property. If the property does not exist, nothing will happen. Note: In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn’t apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase).

pub fn set_block_signals(&self, enable: bool)

If set to true, signal emission is blocked.

pub fn set_deferred( &self, property: impl Into<GodotString>, value: impl OwnedToVariant, )

Assigns a new value to the given property, after the current frame’s physics step. This is equivalent to calling [method set] via [method call_deferred], i.e. call_deferred("set", property, value). Note: In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn’t apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase).

pub fn set_indexed( &self, property: impl Into<NodePath>, value: impl OwnedToVariant, )

Sample code is GDScript unless otherwise noted.

Assigns a new value to the property identified by the NodePath. The node path should be relative to the current object and can use the colon character (:) to access nested properties. Example:

set_indexed("position", Vector2(42, 0))
set_indexed("position:y", -10)
print(position) # (42, -10)

pub fn set_message_translation(&self, enable: bool)

Defines whether the object can translate strings (with calls to [method tr]). Enabled by default.

pub fn set_meta(&self, name: impl Into<GodotString>, value: impl OwnedToVariant)

Adds, changes or removes a given entry in the object’s metadata. Metadata are serialized and can take any Variant value. To remove a given entry from the object’s metadata, use [method remove_meta]. Metadata is also removed if its value is set to null. This means you can also use set_meta("name", null) to remove metadata for "name".

pub fn set_script(&self, script: impl AsArg<Reference>)

Assigns a script to the object. Each object can have a single script assigned to it, which are used to extend its functionality. If the object already had a script, the previous script instance will be freed and its variables and state will be lost. The new script’s [method _init] method will be called.

pub fn to_string(&self) -> GodotString

Returns a String representing the object. If not overridden, defaults to "[ClassName:RID]". Override the method [method _to_string] to customize the String representation.

pub fn tr(&self, message: impl Into<GodotString>) -> GodotString

Translates a message using translation catalogs configured in the Project Settings. Only works if message translation is enabled (which it is by default), otherwise it returns the message unchanged. See [method set_message_translation].

Trait Implementations

impl Debug for CSGMesh

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Deref for CSGMesh

type Target = CSGPrimitive

The resulting type after dereferencing.

fn deref(&self) -> &CSGPrimitive

Dereferences the value.

impl DerefMut for CSGMesh

fn deref_mut(&mut self) -> &mut CSGPrimitive

Mutably dereferences the value.

impl GodotObject for CSGMesh

type RefKind = ManuallyManaged

The memory management kind of this type. This modifies the behavior of the Ref smart pointer. See its type-level documentation for more information.

fn class_name() -> &'static str

fn null() -> Null<Self>

Creates an explicitly null reference of Self as a method argument. This makes type inference easier for the compiler compared to Option.

fn new() -> Ref<Self, Unique>

where Self: Instanciable,

Creates a new instance of Self using a zero-argument constructor, as a Unique reference.

fn cast<T>(&self) -> Option<&T>

where T: GodotObject + SubClass<Self>,

Performs a dynamic reference downcast to target type.

fn upcast<T>(&self) -> &T

where T: GodotObject, Self: SubClass<T>,

Performs a static reference upcast to a supertype that is guaranteed to be valid.

unsafe fn assume_shared(&self) -> Ref<Self>

where Self: Sized,

Creates a persistent reference to the same Godot object with shared thread access.

unsafe fn assume_unique(&self) -> Ref<Self, Unique>

where Self: Sized,

Creates a persistent reference to the same Godot object with unique access.

unsafe fn try_from_instance_id<'a>(id: i64) -> Option<TRef<'a, Self>>

Recovers a instance ID previously returned by Object::get_instance_id if the object is still alive. See also TRef::try_from_instance_id.

unsafe fn from_instance_id<'a>(id: i64) -> TRef<'a, Self>

Recovers a instance ID previously returned by Object::get_instance_id if the object is still alive, and panics otherwise. This does NOT guarantee that the resulting reference is safe to use.

impl Instanciable for CSGMesh

fn construct() -> Ref<Self, Unique>

impl QueueFree for CSGMesh

impl Sealed for CSGMesh

impl SubClass<CSGPrimitive> for CSGMesh

impl SubClass<CSGShape> for CSGMesh

impl SubClass<GeometryInstance> for CSGMesh

impl SubClass<Node> for CSGMesh

impl SubClass<Object> for CSGMesh

impl SubClass<Spatial> for CSGMesh

impl SubClass<VisualInstance> for CSGMesh