Milimeters

Struct Milimeters

pub struct Milimeters(pub f32);

Expand description

Repersents distance in milimeters

Tuple Fields§

§0: f32

Trait Implementations§

impl Clone for Milimeters

fn clone(&self) -> Milimeters

Returns a duplicate of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for Milimeters

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl From<Milimeters> for Distance

fn from(value: Milimeters) -> Self

Converts to this type from the input type.

impl Neg for Milimeters

type Output = Milimeters

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation. Read more

impl PartialEq for Milimeters

fn eq(&self, other: &Milimeters) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Milimeters

fn partial_cmp(&self, other: &Milimeters) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more

1.0.0 · Source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more

1.0.0 · Source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0 · Source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more

1.0.0 · Source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl Copy for Milimeters

impl StructuralPartialEq for Milimeters

Auto Trait Implementations§

impl Freeze for Milimeters

impl RefUnwindSafe for Milimeters

impl Send for Milimeters

impl Sync for Milimeters

impl Unpin for Milimeters

impl UnwindSafe for Milimeters

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<Src, Scheme> ApproxFrom<Src, Scheme> for Src
where Scheme: ApproxScheme,

type Err = NoError

The error type produced by a failed conversion.

fn approx_from(src: Src) -> Result<Src, <Src as ApproxFrom<Src, Scheme>>::Err>

Convert the given value into an approximately equivalent representation.

impl<Dst, Src, Scheme> ApproxInto<Dst, Scheme> for Src
where Dst: ApproxFrom<Src, Scheme>, Scheme: ApproxScheme,

type Err = <Dst as ApproxFrom<Src, Scheme>>::Err

The error type produced by a failed conversion.

fn approx_into(self) -> Result<Dst, <Src as ApproxInto<Dst, Scheme>>::Err>

Convert the subject into an approximately equivalent representation.

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

impl<T, Dst> ConvAsUtil<Dst> for T

fn approx(self) -> Result<Dst, Self::Err>
where Self: Sized + ApproxInto<Dst>,

Approximate the subject with the default scheme.

fn approx_by<Scheme>(self) -> Result<Dst, Self::Err>
where Self: Sized + ApproxInto<Dst, Scheme>, Scheme: ApproxScheme,

Approximate the subject with a specific scheme.

impl<T> ConvUtil for T

fn approx_as<Dst>(self) -> Result<Dst, Self::Err>
where Self: Sized + ApproxInto<Dst>,

Approximate the subject to a given type with the default scheme.

fn approx_as_by<Dst, Scheme>(self) -> Result<Dst, Self::Err>
where Self: Sized + ApproxInto<Dst, Scheme>, Scheme: ApproxScheme,

Approximate the subject to a given type with a specific scheme.

fn into_as<Dst>(self) -> Dst
where Self: Sized + Into<Dst>,

Convert the subject to a given type.

fn try_as<Dst>(self) -> Result<Dst, Self::Err>
where Self: Sized + TryInto<Dst>,

Attempt to convert the subject to a given type.

fn value_as<Dst>(self) -> Result<Dst, Self::Err>
where Self: Sized + ValueInto<Dst>,

Attempt a value conversion of the subject to a given type.

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<T> Pointable for T

const ALIGN: usize

The alignment of pointer.

type Init = T

The type for initializers.

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<SS, SP> SupersetOf<SS> for SP
where SS: SubsetOf<SP>,

fn to_subset(&self) -> Option<SS>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

fn is_in_subset(&self) -> bool

Checks if self is actually part of its subset T (and can be converted to it).

fn to_subset_unchecked(&self) -> SS

Use with care! Same as self.to_subset but without any property checks. Always succeeds.

fn from_subset(element: &SS) -> SP

The inclusion map: converts self to the equivalent element of its superset.

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<Src> TryFrom<Src> for Src

type Err = NoError

The error type produced by a failed conversion.

fn try_from(src: Src) -> Result<Src, <Src as TryFrom<Src>>::Err>

Convert the given value into the subject type.

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<Src, Dst> TryInto<Dst> for Src
where Dst: TryFrom<Src>,

type Err = <Dst as TryFrom<Src>>::Err

The error type produced by a failed conversion.

fn try_into(self) -> Result<Dst, <Src as TryInto<Dst>>::Err>

Convert the subject into the destination type.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<Src> ValueFrom<Src> for Src

type Err = NoError

The error type produced by a failed conversion.

fn value_from(src: Src) -> Result<Src, <Src as ValueFrom<Src>>::Err>

Convert the given value into an exactly equivalent representation.

impl<Src, Dst> ValueInto<Dst> for Src
where Dst: ValueFrom<Src>,

type Err = <Dst as ValueFrom<Src>>::Err

The error type produced by a failed conversion.

fn value_into(self) -> Result<Dst, <Src as ValueInto<Dst>>::Err>

Convert the subject into an exactly equivalent representation.

impl<T> ClosedNeg for T
where T: Neg<Output = T>,

impl<T> Scalar for T
where T: 'static + Clone + PartialEq + Debug,