Struct fixed::FixedI32

pub struct FixedI32<Frac> { /* private fields */ }

A 32-bit signed number with Frac fractional bits.

The number has 32 bits, of which f = Frac are fractional bits and 32 − f are integer bits. The value x can lie in the range −2³¹/2^f ≤ x < 2³¹/2^f. The difference between successive numbers is constant throughout the range: Δ = 1/2^f.

For FixedI32<U0>, f = 0 and Δ = 1, and the fixed-point number behaves like an i32 with the value lying in the range −2³¹ ≤ x < 2³¹. For FixedI32<U32>, f = 32 and Δ = 1/2³², and the value lies in the range −1/2 ≤ x < 1/2.

Frac is an Unsigned as provided by the typenum crate; the plan is to to have a major version 2 where Frac is replaced by FRAC of type i32 when the Rust compiler’s generic_const_exprs feature is ready and stabilized. An alpha version is already available.

FixedI32<Frac> has the same size, alignment and ABI as i32; it is #[repr(transparent)] with i32 as the only non-zero-sized field.

Examples

use fixed::{types::extra::U3, FixedI32};
let eleven = FixedI32::<U3>::from_num(11);
assert_eq!(eleven, FixedI32::<U3>::from_bits(11 << 3));
assert_eq!(eleven, 11);
assert_eq!(eleven.to_string(), "11");
let two_point_75 = eleven / 4;
assert_eq!(two_point_75, FixedI32::<U3>::from_bits(11 << 1));
assert_eq!(two_point_75, 2.75);
assert_eq!(two_point_75.to_string(), "2.8");

Implementations

impl<Frac> FixedI32<Frac>

The implementation of items in this block is independent of the number of fractional bits Frac.

pub const ZERO: FixedI32<Frac> = _

Zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::ZERO, Fix::from_bits(0));

pub const DELTA: FixedI32<Frac> = _

The difference between any two successive representable numbers, Δ.

If the number has f = Frac fractional bits, then Δ = 1/2^f.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::DELTA, Fix::from_bits(1));
// binary 0.0001 is decimal 0.0625
assert_eq!(Fix::DELTA, 0.0625);

pub const MIN: FixedI32<Frac> = _

The smallest value that can be represented.

If the number has f = Frac fractional bits, then the minimum is −2³¹/2^f.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::MIN, Fix::from_bits(i32::MIN));

pub const MAX: FixedI32<Frac> = _

The largest value that can be represented.

If the number has f = Frac fractional bits, then the maximum is (2³¹ − 1)/2^f.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::MAX, Fix::from_bits(i32::MAX));

pub const IS_SIGNED: bool = true

true because the FixedI32 type is signed.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert!(Fix::IS_SIGNED);

pub const fn from_bits(bits: i32) -> FixedI32<Frac>

Creates a fixed-point number that has a bitwise representation identical to the given integer.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 0010.0000 = 2
assert_eq!(Fix::from_bits(0b10_0000), 2);

pub const fn to_bits(self) -> i32

Creates an integer that has a bitwise representation identical to the given fixed-point number.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 2 is 0010.0000
assert_eq!(Fix::from_num(2).to_bits(), 0b10_0000);

pub const fn from_be(f: FixedI32<Frac>) -> FixedI32<Frac>

Converts a fixed-point number from big endian to the target’s endianness.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let f = Fix::from_bits(0x1234_5678);
if cfg!(target_endian = "big") {
    assert_eq!(Fix::from_be(f), f);
} else {
    assert_eq!(Fix::from_be(f), f.swap_bytes());
}

pub const fn from_le(f: FixedI32<Frac>) -> FixedI32<Frac>

Converts a fixed-point number from little endian to the target’s endianness.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let f = Fix::from_bits(0x1234_5678);
if cfg!(target_endian = "little") {
    assert_eq!(Fix::from_le(f), f);
} else {
    assert_eq!(Fix::from_le(f), f.swap_bytes());
}

pub const fn to_be(self) -> FixedI32<Frac>

Converts self to big endian from the target’s endianness.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let f = Fix::from_bits(0x1234_5678);
if cfg!(target_endian = "big") {
    assert_eq!(f.to_be(), f);
} else {
    assert_eq!(f.to_be(), f.swap_bytes());
}

pub const fn to_le(self) -> FixedI32<Frac>

Converts self to little endian from the target’s endianness.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let f = Fix::from_bits(0x1234_5678);
if cfg!(target_endian = "little") {
    assert_eq!(f.to_le(), f);
} else {
    assert_eq!(f.to_le(), f.swap_bytes());
}

pub const fn swap_bytes(self) -> FixedI32<Frac>

Reverses the byte order of the fixed-point number.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let f = Fix::from_bits(0x1234_5678);
let swapped = Fix::from_bits(0x7856_3412);
assert_eq!(f.swap_bytes(), swapped);

pub const fn from_be_bytes(bytes: [u8; 4]) -> FixedI32<Frac>

Creates a fixed-point number from its representation as a byte array in big endian.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_be_bytes([0x12, 0x34, 0x56, 0x78]),
    Fix::from_bits(0x1234_5678)
);

pub const fn from_le_bytes(bytes: [u8; 4]) -> FixedI32<Frac>

Creates a fixed-point number from its representation as a byte array in little endian.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_le_bytes([0x78, 0x56, 0x34, 0x12]),
    Fix::from_bits(0x1234_5678)
);

pub const fn from_ne_bytes(bytes: [u8; 4]) -> FixedI32<Frac>

Creates a fixed-point number from its representation as a byte array in native endian.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    if cfg!(target_endian = "big") {
        Fix::from_ne_bytes([0x12, 0x34, 0x56, 0x78])
    } else {
        Fix::from_ne_bytes([0x78, 0x56, 0x34, 0x12])
    },
    Fix::from_bits(0x1234_5678)
);

pub const fn to_be_bytes(self) -> [u8; 4]

Returns the memory representation of this fixed-point number as a byte array in big-endian byte order.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let val = Fix::from_bits(0x1234_5678);
assert_eq!(
    val.to_be_bytes(),
    [0x12, 0x34, 0x56, 0x78]
);

pub const fn to_le_bytes(self) -> [u8; 4]

Returns the memory representation of this fixed-point number as a byte array in little-endian byte order.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let val = Fix::from_bits(0x1234_5678);
assert_eq!(
    val.to_le_bytes(),
    [0x78, 0x56, 0x34, 0x12]
);

pub const fn to_ne_bytes(self) -> [u8; 4]

Returns the memory representation of this fixed-point number as a byte array in native byte order.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let val = Fix::from_bits(0x1234_5678);
assert_eq!(
    val.to_ne_bytes(),
    if cfg!(target_endian = "big") {
        [0x12, 0x34, 0x56, 0x78]
    } else {
        [0x78, 0x56, 0x34, 0x12]
    }
);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let f = Fix::from_bits(0b11_0010);
assert_eq!(f.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let f = Fix::from_bits(!0b11_0010);
assert_eq!(f.count_zeros(), 3);

pub const fn leading_ones(self) -> u32

Returns the number of leading ones in the binary representation.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let all_ones = !Fix::ZERO;
let f = all_ones - Fix::from_bits(0b10_0000);
assert_eq!(f.leading_ones(), 32 - 6);

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let f = Fix::from_bits(0b10_0000);
assert_eq!(f.leading_zeros(), 32 - 6);

pub const fn trailing_ones(self) -> u32

Returns the number of trailing ones in the binary representation.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let f = Fix::from_bits(0b101_1111);
assert_eq!(f.trailing_ones(), 5);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let f = Fix::from_bits(0b10_0000);
assert_eq!(f.trailing_zeros(), 5);

pub const fn signed_bits(self) -> u32

Returns the number of bits required to represent the value.

The number of bits required includes an initial one for negative numbers, and an initial zero for non-negative numbers.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(-3).signed_bits(), 7);      // “_101.0000”
assert_eq!(Fix::from_num(-1).signed_bits(), 5);      // “___1.0000”
assert_eq!(Fix::from_num(-0.0625).signed_bits(), 1); // “____.___1”
assert_eq!(Fix::from_num(0).signed_bits(), 1);       // “____.___0”
assert_eq!(Fix::from_num(0.0625).signed_bits(), 2);  // “____.__01”
assert_eq!(Fix::from_num(1).signed_bits(), 6);       // “__01.0000”
assert_eq!(Fix::from_num(3).signed_bits(), 7);       // “_011.0000”

pub const fn reverse_bits(self) -> FixedI32<Frac>

Reverses the order of the bits of the fixed-point number.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let bits = 0x1234_5678_i32;
let rev_bits = bits.reverse_bits();
assert_eq!(Fix::from_bits(bits).reverse_bits(), Fix::from_bits(rev_bits));

pub const fn rotate_left(self, n: u32) -> FixedI32<Frac>

Shifts to the left by n bits, wrapping the truncated bits to the right end.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let bits: i32 = (0b111 << (32 - 3)) | 0b1010;
let rot = 0b1010111;
assert_eq!(bits.rotate_left(3), rot);
assert_eq!(Fix::from_bits(bits).rotate_left(3), Fix::from_bits(rot));

pub const fn rotate_right(self, n: u32) -> FixedI32<Frac>

Shifts to the right by n bits, wrapping the truncated bits to the left end.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let bits: i32 = 0b1010111;
let rot = (0b111 << (32 - 3)) | 0b1010;
assert_eq!(bits.rotate_right(3), rot);
assert_eq!(Fix::from_bits(bits).rotate_right(3), Fix::from_bits(rot));

pub const fn is_zero(self) -> bool

Returns true if the number is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert!(Fix::ZERO.is_zero());
assert!(!Fix::from_num(5).is_zero());

pub const fn is_positive(self) -> bool

Returns true if the number is > 0.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert!(Fix::from_num(5).is_positive());
assert!(!Fix::ZERO.is_positive());
assert!(!Fix::from_num(-5).is_positive());

pub const fn is_negative(self) -> bool

Returns true if the number is < 0.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert!(!Fix::from_num(5).is_negative());
assert!(!Fix::ZERO.is_negative());
assert!(Fix::from_num(-5).is_negative());

pub const fn wide_mul<RhsFrac>( self, rhs: FixedI32<RhsFrac> ) -> FixedI64<Sum<Frac, RhsFrac>>

where Frac: Add<RhsFrac>,

Multiplies two fixed-point numbers and returns a wider type to retain all precision.

If self has f fractional bits and 32 − f integer bits, and rhs has g fractional bits and 32 − g integer bits, then the returned fixed-point number will have f + g fractional bits and 64 − f − g integer bits.

Examples

use fixed::{
    types::extra::{U2, U4},
    FixedI32,
};
// decimal: 1.25 × 1.0625 = 1.328_125
// binary: 1.01 × 1.0001 = 1.010101
let a = FixedI32::<U2>::from_num(1.25);
let b = FixedI32::<U4>::from_num(1.0625);
assert_eq!(a.wide_mul(b), 1.328_125);

pub const fn wide_mul_unsigned<RhsFrac>( self, rhs: FixedU32<RhsFrac> ) -> FixedI64<Sum<Frac, RhsFrac>>

where Frac: Add<RhsFrac>,

Multiplies an unsigned fixed-point number and returns a wider signed type to retain all precision.

If self has f fractional bits and 32 − f integer bits, and rhs has g fractional bits and 32 − g integer bits, then the returned fixed-point number will have f + g fractional bits and 64 − f − g integer bits.

Examples

use fixed::{
    types::extra::{U2, U4},
    FixedI32, FixedU32,
};
// decimal: -1.25 × 1.0625 = -1.328_125
// binary: -1.01 × 1.0001 = -1.010101
let a = FixedI32::<U2>::from_num(-1.25);
let b = FixedU32::<U4>::from_num(1.0625);
assert_eq!(a.wide_mul_unsigned(b), -1.328_125);

pub const fn wide_div<RhsFrac>( self, rhs: FixedI32<RhsFrac> ) -> FixedI64<Diff<Sum<U32, Frac>, RhsFrac>>

where U32: Add<Frac>, Sum<U32, Frac>: Sub<RhsFrac>,

Divides two fixed-point numbers and returns a wider type to retain more precision.

If self has f fractional bits and 32 − f integer bits, and rhs has g fractional bits and 32 − g integer bits, then the returned fixed-point number will have 32 + f − g fractional bits and 32 − f + g integer bits.

Warning: While most cases of overflow are avoided using this method, dividing MIN by -DELTA will still result in panic due to overflow. The alternative wide_sdiv method avoids this by sacrificing one fractional bit in the return type.

Panics

Panics if the divisor is zero or on overflow. Overflow can only occur when dividing MIN by -DELTA.

Examples

use fixed::{
    types::extra::{U3, U5, U30},
    FixedI32, FixedI64,
};
// decimal: 4.625 / 0.03125 = 148
// binary: 100.101 / 0.00001 = 10010100
let a = FixedI32::<U3>::from_num(4.625);
let b = FixedI32::<U5>::from_num(0.03125);
let ans: FixedI64<U30> = a.wide_div(b);
assert_eq!(ans, 148);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MIN.wide_div(-Fix::DELTA);

pub const fn wide_sdiv<RhsFrac>( self, rhs: FixedI32<RhsFrac> ) -> FixedI64<Diff<Sum<U31, Frac>, RhsFrac>>

where U31: Add<Frac>, Sum<U31, Frac>: Sub<RhsFrac>,

Divides two fixed-point numbers and returns a wider type to retain more precision.

If self has f fractional bits and 32 − f integer bits, and rhs has g fractional bits and 32 − g integer bits, then the returned fixed-point number will have 31 + f − g fractional bits and 33 − f + g integer bits.

This is similar to the wide_div method but sacrifices one fractional bit to avoid overflow.

Panics

Panics if the divisor is zero.

Examples

use fixed::{
    types::extra::{U4, U5, U30},
    FixedI32, FixedI64,
};
// decimal: 4.625 / 0.03125 = 148
// binary: 100.101 / 0.00001 = 10010100
let a = FixedI32::<U4>::from_num(4.625);
let b = FixedI32::<U5>::from_num(0.03125);
let ans: FixedI64<U30> = a.wide_sdiv(b);
assert_eq!(ans, 148);

Unlike wide_div, dividing MIN by -DELTA does not overflow.

use fixed::{
    types::extra::{U4, U31},
    FixedI32, FixedI64,
};
type Fix = FixedI32<U4>;
type DFix = FixedI64<U31>;
assert_eq!(Fix::MIN.wide_sdiv(-Fix::DELTA), (DFix::MIN / 2).abs());

pub const fn wide_div_unsigned<RhsFrac>( self, rhs: FixedU32<RhsFrac> ) -> FixedI64<Diff<Sum<U32, Frac>, RhsFrac>>

where U32: Add<Frac>, Sum<U32, Frac>: Sub<RhsFrac>,

Divides by an unsigned fixed-point number and returns a wider signed type to retain more precision.

If self has f fractional bits and 32 − f integer bits, and rhs has g fractional bits and 32 − g integer bits, then the returned fixed-point number will have 32 + f − g fractional bits and 32 − f + g integer bits.

Panics

Panics if the divisor is zero.

Examples

use fixed::{
    types::extra::{U3, U5, U30},
    FixedI32, FixedI64, FixedU32,
};
// decimal: -4.625 / 0.03125 = -148
// binary: -100.101 / 0.00001 = -10010100
let a = FixedI32::<U3>::from_num(-4.625);
let b = FixedU32::<U5>::from_num(0.03125);
let ans: FixedI64<U30> = a.wide_div_unsigned(b);
assert_eq!(ans, -148);

pub const fn mul_add<MulFrac: LeEqU32>( self, mul: FixedI32<MulFrac>, add: FixedI32<Frac> ) -> FixedI32<Frac>

Multiply and add. Returns self × mul + add.

For some cases, the product self × mul would overflow on its own, but the final result self × mul + add is representable; in these cases this method returns the correct result without overflow.

The mul parameter can have a fixed-point type like self but with a different number of fractional bits.

Panics

When debug assertions are enabled, this method panics if the result overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_mul_add instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).mul_add(Fix::from_num(0.5), Fix::from_num(3)),
    Fix::from_num(5)
);
// MAX × 1.5 - MAX = MAX / 2, which does not overflow
assert_eq!(Fix::MAX.mul_add(Fix::from_num(1.5), -Fix::MAX), Fix::MAX / 2);

pub const fn rem_euclid(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Remainder for Euclidean division.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).rem_euclid(Fix::from_num(2)), Fix::from_num(1.5));
assert_eq!(Fix::from_num(-7.5).rem_euclid(Fix::from_num(2)), Fix::from_num(0.5));

pub const fn abs(self) -> FixedI32<Frac>

Returns the absolute value.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let five = Fix::from_num(5);
let minus_five = Fix::from_num(-5);
assert_eq!(five.abs(), five);
assert_eq!(minus_five.abs(), five);

pub const fn unsigned_abs(self) -> FixedU32<Frac>

Returns the absolute value using an unsigned type without any wrapping or panicking.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(Fix::from_num(-5).unsigned_abs(), UFix::from_num(5));
// min_as_unsigned has only highest bit set
let min_as_unsigned = UFix::ONE << (UFix::INT_NBITS - 1);
assert_eq!(Fix::MIN.unsigned_abs(), min_as_unsigned);

pub const fn dist(self, other: FixedI32<Frac>) -> FixedI32<Frac>

Returns the distance from self to other.

The distance is the absolute value of the difference.

Panics

When debug assertions are enabled, this method panics if the result overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_dist instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::ONE.dist(Fix::from_num(5)), Fix::from_num(4));
assert_eq!(Fix::NEG_ONE.dist(Fix::from_num(2)), Fix::from_num(3));

pub const fn unsigned_dist(self, other: FixedI32<Frac>) -> FixedU32<Frac>

Returns the distance from self to other using an unsigned type without any wrapping or panicking.

The distance is the absolute value of the difference.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(Fix::NEG_ONE.unsigned_dist(Fix::from_num(2)), UFix::from_num(3));
assert_eq!(Fix::MIN.unsigned_dist(Fix::MAX), UFix::MAX);

pub const fn abs_diff(self, other: FixedI32<Frac>) -> FixedU32<Frac>

Returns the absolute value of the difference between self and other using an unsigned type without any wrapping or panicking.

This method is the same as unsigned_dist for signed fixed-point numbers.

pub const fn mean(self, other: FixedI32<Frac>) -> FixedI32<Frac>

Returns the mean of self and other.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).mean(Fix::from_num(4)), Fix::from_num(3.5));
assert_eq!(Fix::from_num(-3).mean(Fix::from_num(4)), Fix::from_num(0.5));

pub const fn hypot(self, other: FixedI32<Frac>) -> FixedI32<Frac>

Compute the hypotenuse of a right triange.

The hypotenuse is equal to the square root of the sum of the squares of the operands.

This method uses an iterative method for its square root, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √(self² + other²) < result + DELTA.

Panics

When debug assertions are enabled, this method panics if the result overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_hypot instead.

Examples

use fixed::types::extra::U28;
use fixed::FixedI32;
type Fix = FixedI32<U28>;

// hypot(3, 4) == 5
assert_eq!(
    Fix::from_num(3).overflowing_hypot(Fix::from_num(4)),
    (Fix::from_num(5), false)
);

pub const fn next_multiple_of(self, other: FixedI32<Frac>) -> FixedI32<Frac>

Returns the smallest multiple of other that is ≥ self if other is positive, and the largest multiple of other that is ≤ self if other is negative.

Panics

Panics if other is zero.

When debug assertions are enabled, this method also panics if the result overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_next_multiple_of instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).next_multiple_of(Fix::from_num(1.5)),
    Fix::from_num(4.5)
);
assert_eq!(
    Fix::from_num(4).next_multiple_of(Fix::from_num(-1.5)),
    Fix::from_num(3)
);

pub const fn inv_lerp<RetFrac: LeEqU32>( self, start: FixedI32<Frac>, end: FixedI32<Frac> ) -> FixedI32<RetFrac>

Inverse linear interpolation between start and end.

The computed value can have a fixed-point type like self but with a different number of fractional bits.

Returns (self − start) / (end − start). This is 0 when self = start, and 1 when self = end.

Panics

Panics when start = end.

When debug assertions are enabled, this method also panics if the result overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_inv_lerp instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let start = Fix::from_num(2);
let end = Fix::from_num(3.5);
assert_eq!(Fix::from_num(0.5).inv_lerp::<U4>(start, end), -1);
assert_eq!(Fix::from_num(2).inv_lerp::<U4>(start, end), 0);
assert_eq!(Fix::from_num(2.75).inv_lerp::<U4>(start, end), 0.5);
assert_eq!(Fix::from_num(3.5).inv_lerp::<U4>(start, end), 1);
assert_eq!(Fix::from_num(5).inv_lerp::<U4>(start, end), 2);

pub const fn add_unsigned(self, rhs: FixedU32<Frac>) -> FixedI32<Frac>

Addition with an unsigned fixed-point number.

Panics

When debug assertions are enabled, this method panics if the result overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_add_unsigned instead.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(Fix::from_num(-5).add_unsigned(UFix::from_num(3)), -2);

pub const fn sub_unsigned(self, rhs: FixedU32<Frac>) -> FixedI32<Frac>

Subtraction with an unsigned fixed-point number.

Panics

When debug assertions are enabled, this method panics if the result overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_sub_unsigned instead.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(Fix::from_num(3).sub_unsigned(UFix::from_num(5)), -2);

pub const fn const_not(self) -> FixedI32<Frac>

Bitwise NOT. Usable in constant context.

This is equivalent to the ! operator and Not::not, but can also be used in constant context. Unless required in constant context, use the operator or trait instead.

Planned deprecation

This method will be deprecated when the ! operator and the Not trait are usable in constant context.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
const A: Fix = Fix::from_bits(0x3E);
const NOT_A: Fix = A.const_not();
assert_eq!(NOT_A, !A);

pub const fn const_bitand(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Bitwise AND. Usable in constant context.

This is equivalent to the & operator and BitAnd::bitand, but can also be used in constant context. Unless required in constant context, use the operator or trait instead.

Planned deprecation

This method will be deprecated when the & operator and the BitAnd trait are usable in constant context.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
const A: Fix = Fix::from_bits(0x3E);
const B: Fix = Fix::from_bits(0x55);
const A_BITAND_B: Fix = A.const_bitand(B);
assert_eq!(A_BITAND_B, A & B);

pub const fn const_bitor(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Bitwise OR. Usable in constant context.

This is equivalent to the | operator and BitOr::bitor, but can also be used in constant context. Unless required in constant context, use the operator or trait instead.

Planned deprecation

This method will be deprecated when the | operator and the BitOr trait are usable in constant context.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
const A: Fix = Fix::from_bits(0x3E);
const B: Fix = Fix::from_bits(0x55);
const A_BITOR_B: Fix = A.const_bitor(B);
assert_eq!(A_BITOR_B, A | B);

pub const fn const_bitxor(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Bitwise XOR. Usable in constant context.

This is equivalent to the ^ operator and BitXor::bitxor, but can also be used in constant context. Unless required in constant context, use the operator or trait instead.

Planned deprecation

This method will be deprecated when the ^ operator and the BitXor trait are usable in constant context.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
const A: Fix = Fix::from_bits(0x3E);
const B: Fix = Fix::from_bits(0x55);
const A_BITXOR_B: Fix = A.const_bitxor(B);
assert_eq!(A_BITXOR_B, A ^ B);

pub const fn checked_neg(self) -> Option<FixedI32<Frac>>

Checked negation. Returns the negated value, or None on overflow.

Overflow can only occur when negating the minimum value.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).checked_neg(), Some(Fix::from_num(-5)));
assert_eq!(Fix::MIN.checked_neg(), None);

pub const fn checked_add(self, rhs: FixedI32<Frac>) -> Option<FixedI32<Frac>>

Checked addition. Returns the sum, or None on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!((Fix::MAX - Fix::ONE).checked_add(Fix::ONE), Some(Fix::MAX));
assert_eq!(Fix::MAX.checked_add(Fix::ONE), None);

pub const fn checked_sub(self, rhs: FixedI32<Frac>) -> Option<FixedI32<Frac>>

Checked subtraction. Returns the difference, or None on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!((Fix::MIN + Fix::ONE).checked_sub(Fix::ONE), Some(Fix::MIN));
assert_eq!(Fix::MIN.checked_sub(Fix::ONE), None);

pub const fn checked_rem(self, rhs: FixedI32<Frac>) -> Option<FixedI32<Frac>>

Checked remainder. Returns the remainder, or None if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(1.5).checked_rem(Fix::ONE), Some(Fix::from_num(0.5)));
assert_eq!(Fix::from_num(1.5).checked_rem(Fix::ZERO), None);

pub const fn checked_mul_add<MulFrac: LeEqU32>( self, mul: FixedI32<MulFrac>, add: FixedI32<Frac> ) -> Option<FixedI32<Frac>>

Checked multiply and add. Returns self × mul + add, or None on overflow.

For some cases, the product self × mul would overflow on its own, but the final result self × mul + add is representable; in these cases this method returns the correct result without overflow.

The mul parameter can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).checked_mul_add(Fix::from_num(0.5), Fix::from_num(3)),
    Some(Fix::from_num(5))
);
assert_eq!(Fix::MAX.checked_mul_add(Fix::ONE, Fix::ZERO), Some(Fix::MAX));
assert_eq!(Fix::MAX.checked_mul_add(Fix::ONE, Fix::DELTA), None);
// MAX × 1.5 - MAX = MAX / 2, which does not overflow
assert_eq!(Fix::MAX.checked_mul_add(Fix::from_num(1.5), -Fix::MAX), Some(Fix::MAX / 2));

pub const fn checked_mul_int(self, rhs: i32) -> Option<FixedI32<Frac>>

Checked multiplication by an integer. Returns the product, or None on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::MAX.checked_mul_int(1), Some(Fix::MAX));
assert_eq!(Fix::MAX.checked_mul_int(2), None);

pub const fn checked_div_int(self, rhs: i32) -> Option<FixedI32<Frac>>

Checked division by an integer. Returns the quotient, or None if the divisor is zero or if the division results in overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::MAX.checked_div_int(1), Some(Fix::MAX));
assert_eq!(Fix::ONE.checked_div_int(0), None);
assert_eq!(Fix::MIN.checked_div_int(-1), None);

pub const fn checked_rem_euclid( self, rhs: FixedI32<Frac> ) -> Option<FixedI32<Frac>>

Checked remainder for Euclidean division. Returns the remainder, or None if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let num = Fix::from_num(7.5);
assert_eq!(num.checked_rem_euclid(Fix::from_num(2)), Some(Fix::from_num(1.5)));
assert_eq!(num.checked_rem_euclid(Fix::ZERO), None);
assert_eq!((-num).checked_rem_euclid(Fix::from_num(2)), Some(Fix::from_num(0.5)));

pub const fn checked_shl(self, rhs: u32) -> Option<FixedI32<Frac>>

Checked shift left. Returns the shifted number, or None if rhs ≥ 32.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!((Fix::ONE / 2).checked_shl(3), Some(Fix::from_num(4)));
assert_eq!((Fix::ONE / 2).checked_shl(32), None);

pub const fn checked_shr(self, rhs: u32) -> Option<FixedI32<Frac>>

Checked shift right. Returns the shifted number, or None if rhs ≥ 32.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(4).checked_shr(3), Some(Fix::ONE / 2));
assert_eq!(Fix::from_num(4).checked_shr(32), None);

pub const fn checked_abs(self) -> Option<FixedI32<Frac>>

Checked absolute value. Returns the absolute value, or None on overflow.

Overflow can only occur when trying to find the absolute value of the minimum value.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(-5).checked_abs(), Some(Fix::from_num(5)));
assert_eq!(Fix::MIN.checked_abs(), None);

pub const fn checked_dist(self, other: FixedI32<Frac>) -> Option<FixedI32<Frac>>

Checked distance. Returns the distance from self to other, or None on overflow.

The distance is the absolute value of the difference.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::ONE.checked_dist(Fix::from_num(5)), Some(Fix::from_num(4)));
assert_eq!(Fix::MIN.checked_dist(Fix::ZERO), None);

pub const fn checked_hypot( self, other: FixedI32<Frac> ) -> Option<FixedI32<Frac>>

Compute the hypotenuse of a right triange, returning None on overflow.

The hypotenuse is equal to the square root of the sum of the squares of the operands.

This method uses an iterative method for its square root, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √(self² + other²) < result + DELTA.

Examples

use fixed::types::extra::U28;
use fixed::FixedI32;
type Fix = FixedI32<U28>;

// hypot(3, 4) == 5
assert_eq!(
    Fix::from_num(3).checked_hypot(Fix::from_num(4)),
    Some(Fix::from_num(5))
);

// hypot(2, 7.875) == 8.125, which does not fit
assert_eq!(
    Fix::from_num(2).checked_hypot(Fix::from_num(7.875)),
    None
);

pub const fn checked_next_multiple_of( self, other: FixedI32<Frac> ) -> Option<FixedI32<Frac>>

Checked next multiple of other. Returns the next multiple, or None if other is zero or on overflow.

The next multiple is the smallest multiple of other that is ≥ self if other is positive, and the largest multiple of other that is ≤ self if other is negative.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).checked_next_multiple_of(Fix::from_num(1.5)),
    Some(Fix::from_num(4.5))
);
assert_eq!(Fix::from_num(4).checked_next_multiple_of(Fix::ZERO), None);
assert_eq!(Fix::MAX.checked_next_multiple_of(Fix::from_num(2)), None);

pub const fn checked_inv_lerp<RetFrac: LeEqU32>( self, start: FixedI32<Frac>, end: FixedI32<Frac> ) -> Option<FixedI32<RetFrac>>

Checked inverse linear interpolation between start and end. Returns None on overflow or when start = end.

The computed value can have a fixed-point type like self but with a different number of fractional bits.

Returns (self − start) / (end − start). This is 0 when self = start, and 1 when self = end.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let two = Fix::from_num(2);
let four = Fix::from_num(4);
assert_eq!(Fix::from_num(3).checked_inv_lerp::<U4>(two, four), Some(Fix::from_num(0.5)));
assert_eq!(Fix::from_num(2).checked_inv_lerp::<U4>(two, two), None);
assert_eq!(Fix::MAX.checked_inv_lerp::<U4>(Fix::ZERO, Fix::from_num(0.5)), None);

pub const fn checked_add_unsigned( self, rhs: FixedU32<Frac> ) -> Option<FixedI32<Frac>>

Checked addition with an unsigned fixed-point number. Returns the sum, or None on overflow.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(
    Fix::from_num(-5).checked_add_unsigned(UFix::from_num(3)),
    Some(Fix::from_num(-2))
);
assert_eq!(Fix::MAX.checked_add_unsigned(UFix::DELTA), None);

pub const fn checked_sub_unsigned( self, rhs: FixedU32<Frac> ) -> Option<FixedI32<Frac>>

Checked subtraction with an unsigned fixed-point number. Returns the difference, or None on overflow.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(
    Fix::from_num(3).checked_sub_unsigned(UFix::from_num(5)),
    Some(Fix::from_num(-2))
);
assert_eq!(Fix::MIN.checked_sub_unsigned(UFix::DELTA), None);

pub const fn saturating_neg(self) -> FixedI32<Frac>

Saturating negation. Returns the negated value, saturating on overflow.

Overflow can only occur when negating the minimum value.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).saturating_neg(), Fix::from_num(-5));
assert_eq!(Fix::MIN.saturating_neg(), Fix::MAX);

pub const fn saturating_add(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Saturating addition. Returns the sum, saturating on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).saturating_add(Fix::from_num(2)), Fix::from_num(5));
assert_eq!(Fix::MAX.saturating_add(Fix::ONE), Fix::MAX);

pub const fn saturating_sub(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Saturating subtraction. Returns the difference, saturating on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::ONE.saturating_sub(Fix::from_num(3)), Fix::from_num(-2));
assert_eq!(Fix::MIN.saturating_sub(Fix::ONE), Fix::MIN);

pub const fn saturating_mul_add<MulFrac: LeEqU32>( self, mul: FixedI32<MulFrac>, add: FixedI32<Frac> ) -> FixedI32<Frac>

Saturating multiply and add. Returns self × mul + add, saturating on overflow.

For some cases, the product self × mul would overflow on its own, but the final result self × mul + add is representable; in these cases this method returns the correct result without overflow.

The mul parameter can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).saturating_mul_add(Fix::from_num(0.5), Fix::from_num(3)),
    Fix::from_num(5)
);
let half_max = Fix::MAX / 2;
assert_eq!(half_max.saturating_mul_add(Fix::from_num(3), half_max), Fix::MAX);
assert_eq!(half_max.saturating_mul_add(Fix::from_num(-5), half_max), Fix::MIN);
// MAX × 1.5 - MAX = MAX / 2, which does not overflow
assert_eq!(Fix::MAX.saturating_mul_add(Fix::from_num(1.5), -Fix::MAX), half_max);

pub const fn saturating_mul_int(self, rhs: i32) -> FixedI32<Frac>

Saturating multiplication by an integer. Returns the product, saturating on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).saturating_mul_int(2), Fix::from_num(6));
assert_eq!(Fix::MAX.saturating_mul_int(2), Fix::MAX);

pub const fn saturating_div_int(self, rhs: i32) -> FixedI32<Frac>

Saturating division by an integer. Returns the quotient, saturating on overflow.

Overflow can only occur when dividing the minimum value by −1.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.5 is binary 1.1
let one_point_5 = Fix::from_bits(0b11 << (4 - 1));
assert_eq!(Fix::from_num(3).saturating_div_int(2), one_point_5);
assert_eq!(Fix::MIN.saturating_div_int(-1), Fix::MAX);

pub const fn saturating_abs(self) -> FixedI32<Frac>

Saturating absolute value. Returns the absolute value, saturating on overflow.

Overflow can only occur when trying to find the absolute value of the minimum value.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(-5).saturating_abs(), Fix::from_num(5));
assert_eq!(Fix::MIN.saturating_abs(), Fix::MAX);

pub const fn saturating_dist(self, other: FixedI32<Frac>) -> FixedI32<Frac>

Saturating distance. Returns the distance from self to other, saturating on overflow.

The distance is the absolute value of the difference.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::ONE.saturating_dist(Fix::from_num(5)), Fix::from_num(4));
assert_eq!(Fix::MIN.saturating_dist(Fix::MAX), Fix::MAX);

pub const fn saturating_hypot(self, other: FixedI32<Frac>) -> FixedI32<Frac>

Compute the hypotenuse of a right triange, saturating on overflow.

The hypotenuse is equal to the square root of the sum of the squares of the operands.

This method uses an iterative method for its square root, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √(self² + other²) < result + DELTA.

Examples

use fixed::types::extra::U28;
use fixed::FixedI32;
type Fix = FixedI32<U28>;

// hypot(3, 4) == 5
assert_eq!(
    Fix::from_num(3).saturating_hypot(Fix::from_num(4)),
    Fix::from_num(5)
);

// hypot(2, 7.875) == 8.125, which does not fit
assert_eq!(
    Fix::from_num(2).saturating_hypot(Fix::from_num(7.875)),
    Fix::MAX
);

pub const fn saturating_next_multiple_of( self, other: FixedI32<Frac> ) -> FixedI32<Frac>

Saturating next multiple of other.

The next multiple is the smallest multiple of other that is ≥ self if other is positive, and the largest multiple of other that is ≤ self if other is negative.

Panics

Panics if other is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).saturating_next_multiple_of(Fix::from_num(1.5)),
    Fix::from_num(4.5)
);
assert_eq!(Fix::MAX.saturating_next_multiple_of(Fix::from_num(2)), Fix::MAX);

pub const fn saturating_inv_lerp<RetFrac: LeEqU32>( self, start: FixedI32<Frac>, end: FixedI32<Frac> ) -> FixedI32<RetFrac>

Inverse linear interpolation between start and end, saturating on overflow.

The computed value can have a fixed-point type like self but with a different number of fractional bits.

Returns (self − start) / (end − start). This is 0 when self = start, and 1 when self = end.

Panics

Panics when start = end.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let two = Fix::from_num(2);
let four = Fix::from_num(4);
assert_eq!(Fix::from_num(3).saturating_inv_lerp::<U4>(two, four), 0.5);
assert_eq!(Fix::MAX.saturating_inv_lerp::<U4>(Fix::ZERO, Fix::from_num(0.5)), Fix::MAX);
assert_eq!(Fix::MAX.saturating_inv_lerp::<U4>(Fix::from_num(0.5), Fix::ZERO), Fix::MIN);

pub const fn saturating_add_unsigned( self, rhs: FixedU32<Frac> ) -> FixedI32<Frac>

Saturating addition with an unsigned fixed-point number. Returns the sum, saturating on overflow.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(Fix::from_num(-5).saturating_add_unsigned(UFix::from_num(3)), -2);
assert_eq!(Fix::from_num(-5).saturating_add_unsigned(UFix::MAX), Fix::MAX);

pub const fn saturating_sub_unsigned( self, rhs: FixedU32<Frac> ) -> FixedI32<Frac>

Saturating subtraction with an unsigned fixed-point number. Returns the difference, saturating on overflow.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(Fix::from_num(3).saturating_sub_unsigned(UFix::from_num(5)), -2);
assert_eq!(Fix::from_num(5).saturating_sub_unsigned(UFix::MAX), Fix::MIN);

pub const fn wrapping_neg(self) -> FixedI32<Frac>

Wrapping negation. Returns the negated value, wrapping on overflow.

Overflow can only occur when negating the minimum value.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).wrapping_neg(), Fix::from_num(-5));
assert_eq!(Fix::MIN.wrapping_neg(), Fix::MIN);

pub const fn wrapping_add(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Wrapping addition. Returns the sum, wrapping on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let one_minus_delta = Fix::ONE - Fix::DELTA;
assert_eq!(Fix::from_num(3).wrapping_add(Fix::from_num(2)), Fix::from_num(5));
assert_eq!(Fix::MAX.wrapping_add(Fix::ONE), Fix::MIN + one_minus_delta);

pub const fn wrapping_sub(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Wrapping subtraction. Returns the difference, wrapping on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let one_minus_delta = Fix::ONE - Fix::DELTA;
assert_eq!(Fix::from_num(3).wrapping_sub(Fix::from_num(5)), Fix::from_num(-2));
assert_eq!(Fix::MIN.wrapping_sub(Fix::ONE), Fix::MAX - one_minus_delta);

pub const fn wrapping_mul_add<MulFrac: LeEqU32>( self, mul: FixedI32<MulFrac>, add: FixedI32<Frac> ) -> FixedI32<Frac>

Wrapping multiply and add. Returns self × mul + add, wrapping on overflow.

The mul parameter can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).wrapping_mul_add(Fix::from_num(0.5), Fix::from_num(3)),
    Fix::from_num(5)
);
assert_eq!(Fix::MAX.wrapping_mul_add(Fix::ONE, Fix::from_num(0)), Fix::MAX);
assert_eq!(Fix::MAX.wrapping_mul_add(Fix::ONE, Fix::from_bits(1)), Fix::MIN);
let wrapped = Fix::MAX.wrapping_mul_int(4);
assert_eq!(Fix::MAX.wrapping_mul_add(Fix::from_num(3), Fix::MAX), wrapped);

pub const fn wrapping_mul_int(self, rhs: i32) -> FixedI32<Frac>

Wrapping multiplication by an integer. Returns the product, wrapping on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).wrapping_mul_int(2), Fix::from_num(6));
let wrapped = Fix::from_bits(!0 << 2);
assert_eq!(Fix::MAX.wrapping_mul_int(4), wrapped);

pub const fn wrapping_div_int(self, rhs: i32) -> FixedI32<Frac>

Wrapping division by an integer. Returns the quotient, wrapping on overflow.

Overflow can only occur when dividing the minimum value by −1.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.5 is binary 1.1
let one_point_5 = Fix::from_bits(0b11 << (4 - 1));
assert_eq!(Fix::from_num(3).wrapping_div_int(2), one_point_5);
assert_eq!(Fix::MIN.wrapping_div_int(-1), Fix::MIN);

pub const fn wrapping_shl(self, rhs: u32) -> FixedI32<Frac>

Wrapping shift left. Wraps rhs if rhs ≥ 32, then shifts and returns the number.

Unlike most other methods which wrap the result, this method (as well as wrapping_shr) wraps the input operand rhs.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!((Fix::ONE / 2).wrapping_shl(3), Fix::from_num(4));
assert_eq!((Fix::ONE / 2).wrapping_shl(3 + 32), Fix::from_num(4));

pub const fn wrapping_shr(self, rhs: u32) -> FixedI32<Frac>

Wrapping shift right. Wraps rhs if rhs ≥ 32, then shifts and returns the number.

Unlike most other methods which wrap the result, this method (as well as wrapping_shl) wraps the input operand rhs.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!((Fix::from_num(4)).wrapping_shr(3), Fix::ONE / 2);
assert_eq!((Fix::from_num(4)).wrapping_shr(3 + 32), Fix::ONE / 2);

pub const fn wrapping_abs(self) -> FixedI32<Frac>

Wrapping absolute value. Returns the absolute value, wrapping on overflow.

Overflow can only occur when trying to find the absolute value of the minimum value.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(-5).wrapping_abs(), Fix::from_num(5));
assert_eq!(Fix::MIN.wrapping_abs(), Fix::MIN);

pub const fn wrapping_dist(self, other: FixedI32<Frac>) -> FixedI32<Frac>

Wrapping distance. Returns the distance from self to other, wrapping on overflow.

The distance is the absolute value of the difference.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::ONE.wrapping_dist(Fix::from_num(5)), Fix::from_num(4));
assert_eq!(Fix::MIN.wrapping_dist(Fix::MAX), -Fix::DELTA);

pub const fn wrapping_hypot(self, other: FixedI32<Frac>) -> FixedI32<Frac>

Compute the hypotenuse of a right triange, wrapping on overflow.

The hypotenuse is equal to the square root of the sum of the squares of the operands.

This method uses an iterative method for its square root, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √(self² + other²) < result + DELTA.

Examples

use fixed::types::extra::U28;
use fixed::FixedI32;
type Fix = FixedI32<U28>;

// hypot(3, 4) == 5
assert_eq!(
    Fix::from_num(3).wrapping_hypot(Fix::from_num(4)),
    Fix::from_num(5)
);

// hypot(2, 7.875) == 8.125, which wraps to -7.875
assert_eq!(
    Fix::from_num(2).wrapping_hypot(Fix::from_num(7.875)),
    Fix::from_num(-7.875)
);

pub const fn wrapping_next_multiple_of( self, other: FixedI32<Frac> ) -> FixedI32<Frac>

Wrapping next multiple of other.

The next multiple is the smallest multiple of other that is ≥ self if other is positive, and the largest multiple of other that is ≤ self if other is negative.

Panics

Panics if other is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).wrapping_next_multiple_of(Fix::from_num(1.5)),
    Fix::from_num(4.5)
);
let max_minus_delta = Fix::MAX - Fix::DELTA;
assert_eq!(
    Fix::MAX.wrapping_next_multiple_of(max_minus_delta),
    max_minus_delta.wrapping_mul_int(2)
);

pub const fn wrapping_inv_lerp<RetFrac: LeEqU32>( self, start: FixedI32<Frac>, end: FixedI32<Frac> ) -> FixedI32<RetFrac>

Inverse linear interpolation between start and end, wrapping on overflow.

The computed value can have a fixed-point type like self but with a different number of fractional bits.

Returns (self − start) / (end − start). This is 0 when self = start, and 1 when self = end.

Panics

Panics when start = end.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let two = Fix::from_num(2);
let four = Fix::from_num(4);
assert_eq!(Fix::from_num(3).wrapping_inv_lerp::<U4>(two, four), 0.5);
assert_eq!(
    Fix::MAX.wrapping_inv_lerp::<U4>(Fix::ZERO, Fix::from_num(0.5)),
    Fix::MAX.wrapping_mul_int(2)
);

pub const fn wrapping_add_unsigned(self, rhs: FixedU32<Frac>) -> FixedI32<Frac>

Wrapping addition with an unsigned fixed-point number. Returns the sum, wrapping on overflow.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(Fix::from_num(-5).wrapping_add_unsigned(UFix::from_num(3)), -2);
assert_eq!(Fix::ZERO.wrapping_add_unsigned(UFix::MAX), -Fix::DELTA);

pub const fn wrapping_sub_unsigned(self, rhs: FixedU32<Frac>) -> FixedI32<Frac>

Wrapping subtraction with an unsigned fixed-point number. Returns the difference, wrapping on overflow.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(Fix::from_num(3).wrapping_sub_unsigned(UFix::from_num(5)), -2);
assert_eq!(Fix::ZERO.wrapping_sub_unsigned(UFix::MAX), Fix::DELTA);

pub const fn unwrapped_neg(self) -> FixedI32<Frac>

Unwrapped negation. Returns the negated value, panicking on overflow.

Overflow can only occur when negating the minimum value.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).unwrapped_neg(), Fix::from_num(-5));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MIN.unwrapped_neg();

pub const fn unwrapped_add(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Unwrapped addition. Returns the sum, panicking on overflow.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).unwrapped_add(Fix::from_num(2)), Fix::from_num(5));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MAX.unwrapped_add(Fix::DELTA);

pub const fn unwrapped_sub(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Unwrapped subtraction. Returns the difference, panicking on overflow.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).unwrapped_sub(Fix::from_num(5)), Fix::from_num(-2));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MIN.unwrapped_sub(Fix::DELTA);

pub const fn unwrapped_rem(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Unwrapped remainder. Returns the remainder, panicking if the divisor is zero.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(1.5).unwrapped_rem(Fix::ONE), Fix::from_num(0.5));

The following panics because the divisor is zero.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _divisor_is_zero = Fix::from_num(1.5).unwrapped_rem(Fix::ZERO);

pub const fn unwrapped_mul_add<MulFrac: LeEqU32>( self, mul: FixedI32<MulFrac>, add: FixedI32<Frac> ) -> FixedI32<Frac>

Unwrapped multiply and add. Returns self × mul + add, panicking on overflow.

For some cases, the product self × mul would overflow on its own, but the final result self × mul + add is representable; in these cases this method returns the correct result without overflow.

The mul parameter can have a fixed-point type like self but with a different number of fractional bits.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).unwrapped_mul_add(Fix::from_num(0.5), Fix::from_num(3)),
    Fix::from_num(5)
);
// MAX × 1.5 - MAX = MAX / 2, which does not overflow
assert_eq!(Fix::MAX.unwrapped_mul_add(Fix::from_num(1.5), -Fix::MAX), Fix::MAX / 2);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MAX.unwrapped_mul_add(Fix::ONE, Fix::DELTA);

pub const fn unwrapped_mul_int(self, rhs: i32) -> FixedI32<Frac>

Unwrapped multiplication by an integer. Returns the product, panicking on overflow.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).unwrapped_mul_int(2), Fix::from_num(6));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MAX.unwrapped_mul_int(4);

pub const fn unwrapped_div_int(self, rhs: i32) -> FixedI32<Frac>

Unwrapped division by an integer. Returns the quotient, panicking on overflow.

Overflow can only occur when dividing the minimum value by −1.

Panics

Panics if the divisor is zero or if the division results in overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.5 is binary 1.1
let one_point_5 = Fix::from_bits(0b11 << (4 - 1));
assert_eq!(Fix::from_num(3).unwrapped_div_int(2), one_point_5);

The following panics because the divisor is zero.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _divisor_is_zero = Fix::from_num(3).unwrapped_div_int(0);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MIN.unwrapped_div_int(-1);

pub const fn unwrapped_rem_euclid(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Unwrapped remainder for Euclidean division. Returns the remainder, panicking if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let num = Fix::from_num(7.5);
assert_eq!(num.unwrapped_rem_euclid(Fix::from_num(2)), Fix::from_num(1.5));

The following panics because the divisor is zero.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _divisor_is_zero = Fix::from_num(3).unwrapped_rem_euclid(Fix::ZERO);

pub const fn unwrapped_shl(self, rhs: u32) -> FixedI32<Frac>

Unwrapped shift left. Panics if rhs ≥ 32.

Panics

Panics if rhs ≥ 32.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!((Fix::ONE / 2).unwrapped_shl(3), Fix::from_num(4));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::ONE.unwrapped_shl(32);

pub const fn unwrapped_shr(self, rhs: u32) -> FixedI32<Frac>

Unwrapped shift right. Panics if rhs ≥ 32.

Panics

Panics if rhs ≥ 32.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!((Fix::from_num(4)).unwrapped_shr(3), Fix::ONE / 2);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::ONE.unwrapped_shr(32);

pub const fn unwrapped_abs(self) -> FixedI32<Frac>

Unwrapped absolute value. Returns the absolute value, panicking on overflow.

Overflow can only occur when trying to find the absolute value of the minimum value.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(-5).unwrapped_abs(), Fix::from_num(5));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MIN.unwrapped_abs();

pub const fn unwrapped_dist(self, other: FixedI32<Frac>) -> FixedI32<Frac>

Unwrapped distance. Returns the distance from self to other, panicking on overflow.

The distance is the absolute value of the difference.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::ONE.unwrapped_dist(Fix::from_num(5)), Fix::from_num(4));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MIN.unwrapped_dist(Fix::ZERO);

pub const fn unwrapped_hypot(self, other: FixedI32<Frac>) -> FixedI32<Frac>

Compute the hypotenuse of a right triange, panicking on overflow.

The hypotenuse is equal to the square root of the sum of the squares of the operands.

This method uses an iterative method for its square root, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √(self² + other²) < result + DELTA.

Panics

Panics if the result does not fit.

Examples

use fixed::types::extra::U28;
use fixed::FixedI32;
type Fix = FixedI32<U28>;

// hypot(3, 4) == 5
assert_eq!(
    Fix::from_num(3).overflowing_hypot(Fix::from_num(4)),
    (Fix::from_num(5), false)
);

The following panics because of overflow.

use fixed::types::extra::U28;
use fixed::FixedI32;
type Fix = FixedI32<U28>;

// hypot(2, 7.875) == 8.125, which does not fit
let _overflow = Fix::from_num(2).unwrapped_hypot(Fix::from_num(7.875));

pub const fn unwrapped_next_multiple_of( self, other: FixedI32<Frac> ) -> FixedI32<Frac>

Returns the next multiple of other, panicking on overflow.

The next multiple is the smallest multiple of other that is ≥ self if other is positive, and the largest multiple of other that is ≤ self if other is negative.

Panics

Panics if other is zero or on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).unwrapped_next_multiple_of(Fix::from_num(1.5)),
    Fix::from_num(4.5)
);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MAX.unwrapped_next_multiple_of(Fix::from_num(2));

pub const fn unwrapped_inv_lerp<RetFrac: LeEqU32>( self, start: FixedI32<Frac>, end: FixedI32<Frac> ) -> FixedI32<RetFrac>

Inverse linear interpolation between start and end, panicking on overflow.

The computed value can have a fixed-point type like self but with a different number of fractional bits.

Returns (self − start) / (end − start). This is 0 when self = start, and 1 when self = end.

Panics

Panics when start = end or when the results overflows.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let two = Fix::from_num(2);
let four = Fix::from_num(4);
assert_eq!(Fix::from_num(3).unwrapped_inv_lerp::<U4>(two, four), 0.5);

The following panics because start = end.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let two = Fix::from_num(2);
let _zero_range = two.unwrapped_inv_lerp::<U4>(two, two);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MAX.unwrapped_inv_lerp::<U4>(Fix::ZERO, Fix::from_num(0.5));

pub const fn unwrapped_add_unsigned(self, rhs: FixedU32<Frac>) -> FixedI32<Frac>

Unwrapped addition with an unsigned fixed-point number. Returns the sum, panicking on overflow.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(Fix::from_num(-5).unwrapped_add_unsigned(UFix::from_num(3)), -2);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
let _overflow = Fix::MAX.unwrapped_add_unsigned(UFix::DELTA);

pub const fn unwrapped_sub_unsigned(self, rhs: FixedU32<Frac>) -> FixedI32<Frac>

Unwrapped subtraction with an unsigned fixed-point number. Returns the difference, panicking on overflow.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(Fix::from_num(3).unwrapped_sub_unsigned(UFix::from_num(5)), -2);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
let _overflow = Fix::MIN.unwrapped_sub_unsigned(UFix::DELTA);

pub const fn overflowing_neg(self) -> (FixedI32<Frac>, bool)

Overflowing negation.

Returns a tuple of the negated value and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Overflow can only occur when negating the minimum value.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).overflowing_neg(), (Fix::from_num(-5), false));
assert_eq!(Fix::MIN.overflowing_neg(), (Fix::MIN, true));

pub const fn overflowing_add( self, rhs: FixedI32<Frac> ) -> (FixedI32<Frac>, bool)

Overflowing addition.

Returns a tuple of the sum and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let one_minus_delta = Fix::ONE - Fix::DELTA;
assert_eq!(Fix::from_num(3).overflowing_add(Fix::from_num(2)), (Fix::from_num(5), false));
assert_eq!(Fix::MAX.overflowing_add(Fix::ONE), (Fix::MIN + one_minus_delta, true));

pub const fn overflowing_sub( self, rhs: FixedI32<Frac> ) -> (FixedI32<Frac>, bool)

Overflowing subtraction.

Returns a tuple of the difference and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let one_minus_delta = Fix::ONE - Fix::DELTA;
assert_eq!(Fix::from_num(3).overflowing_sub(Fix::from_num(5)), (Fix::from_num(-2), false));
assert_eq!(Fix::MIN.overflowing_sub(Fix::ONE), (Fix::MAX - one_minus_delta, true));

pub const fn overflowing_mul_add<MulFrac: LeEqU32>( self, mul: FixedI32<MulFrac>, add: FixedI32<Frac> ) -> (FixedI32<Frac>, bool)

Overflowing multiply and add.

Returns a tuple of self × mul + add and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

For some cases, the product self × mul would overflow on its own, but the final result self × mul + add is representable; in these cases this method returns the correct result without overflow.

The mul parameter can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::MAX.overflowing_mul_add(Fix::ONE, Fix::ZERO),
    (Fix::MAX, false)
);
assert_eq!(
    Fix::MAX.overflowing_mul_add(Fix::ONE, Fix::DELTA),
    (Fix::MIN, true)
);
assert_eq!(
    Fix::MAX.overflowing_mul_add(Fix::from_num(3), Fix::MAX),
    Fix::MAX.overflowing_mul_int(4)
);
// MAX × 1.5 - MAX = MAX / 2, which does not overflow
assert_eq!(
    Fix::MAX.overflowing_mul_add(Fix::from_num(1.5), -Fix::MAX),
    (Fix::MAX / 2, false)
);

pub const fn overflowing_mul_int(self, rhs: i32) -> (FixedI32<Frac>, bool)

Overflowing multiplication by an integer.

Returns a tuple of the product and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).overflowing_mul_int(2), (Fix::from_num(6), false));
let wrapped = Fix::from_bits(!0 << 2);
assert_eq!(Fix::MAX.overflowing_mul_int(4), (wrapped, true));

pub const fn overflowing_div_int(self, rhs: i32) -> (FixedI32<Frac>, bool)

Overflowing division by an integer.

Returns a tuple of the quotient and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned. Overflow can only occur when dividing the minimum value by −1.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.5 is binary 1.1
let one_point_5 = Fix::from_bits(0b11 << (4 - 1));
assert_eq!(Fix::from_num(3).overflowing_div_int(2), (one_point_5, false));
assert_eq!(Fix::MIN.overflowing_div_int(-1), (Fix::MIN, true));

pub const fn overflowing_shl(self, rhs: u32) -> (FixedI32<Frac>, bool)

Overflowing shift left.

Returns a tuple of the shifted value and a bool indicating whether an overflow has occurred. Overflow occurs when rhs ≥ 32. On overflow rhs is wrapped before the shift operation.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!((Fix::ONE / 2).overflowing_shl(3), (Fix::from_num(4), false));
assert_eq!((Fix::ONE / 2).overflowing_shl(3 + 32), (Fix::from_num(4), true));

pub const fn overflowing_shr(self, rhs: u32) -> (FixedI32<Frac>, bool)

Overflowing shift right.

Returns a tuple of the shifted value and a bool indicating whether an overflow has occurred. Overflow occurs when rhs ≥ 32. On overflow rhs is wrapped before the shift operation.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!((Fix::from_num(4)).overflowing_shr(3), (Fix::ONE / 2, false));
assert_eq!((Fix::from_num(4)).overflowing_shr(3 + 32), (Fix::ONE / 2, true));

pub const fn overflowing_abs(self) -> (FixedI32<Frac>, bool)

Overflowing absolute value.

Returns a tuple of the absolute value and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Overflow can only occur when trying to find the absolute value of the minimum value.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(-5).overflowing_abs(), (Fix::from_num(5), false));
assert_eq!(Fix::MIN.overflowing_abs(), (Fix::MIN, true));

pub const fn overflowing_dist( self, other: FixedI32<Frac> ) -> (FixedI32<Frac>, bool)

Overflowing distance.

Returns a tuple of the distance from self to other and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

The distance is the absolute value of the difference.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::ONE.overflowing_dist(Fix::from_num(5)),
    (Fix::from_num(4), false)
);
assert_eq!(
    Fix::MIN.overflowing_dist(Fix::MAX),
    (-Fix::DELTA, true)
);

pub const fn overflowing_hypot( self, other: FixedI32<Frac> ) -> (FixedI32<Frac>, bool)

Compute the hypotenuse of a right triange.

Returns a tuple of the hypotenuse and a bool, indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

The hypotenuse is equal to the square root of the sum of the squares of the operands.

This method uses an iterative method for its square root, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √(self² + other²) < result + DELTA.

Examples

use fixed::types::extra::U28;
use fixed::FixedI32;
type Fix = FixedI32<U28>;

// hypot(3, 4) == 5
assert_eq!(
    Fix::from_num(3).overflowing_hypot(Fix::from_num(4)),
    (Fix::from_num(5), false)
);

// hypot(2, 7.875) == 8.125, which wraps to -7.875
assert_eq!(
    Fix::from_num(2).overflowing_hypot(Fix::from_num(7.875)),
    (Fix::from_num(-7.875), true)
);

pub const fn overflowing_next_multiple_of( self, other: FixedI32<Frac> ) -> (FixedI32<Frac>, bool)

Overflowing next multiple of other.

Returns a tuple of the next multiple and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

The next multiple is the smallest multiple of other that is ≥ self if other is positive, and the largest multiple of other that is ≤ self if other is negative.

Panics

Panics if other is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(4).overflowing_next_multiple_of(Fix::from_num(1.5)),
    (Fix::from_num(4.5), false)
);
let max_minus_delta = Fix::MAX - Fix::DELTA;
assert_eq!(
    Fix::MAX.overflowing_next_multiple_of(max_minus_delta),
    (max_minus_delta.wrapping_mul_int(2), true)
);

pub const fn overflowing_inv_lerp<RetFrac: LeEqU32>( self, start: FixedI32<Frac>, end: FixedI32<Frac> ) -> (FixedI32<RetFrac>, bool)

Overflowing inverse linear interpolation between start and end.

Returns a tuple of the result and a bool indicationg whether an overflow has occurred. On overflow, the wrapped value is returned.

The computed value can have a fixed-point type like self but with a different number of fractional bits.

Computes (self − start) / (end − start). This is 0 when self = start, and 1 when self = end.

Panics

Panics when start = end.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let two = Fix::from_num(2);
let four = Fix::from_num(4);
assert_eq!(
    Fix::from_num(3).overflowing_inv_lerp::<U4>(two, four),
    (Fix::from_num(0.5), false)
);
assert_eq!(
    Fix::MAX.overflowing_inv_lerp::<U4>(Fix::ZERO, Fix::from_num(0.5)),
    (Fix::MAX.wrapping_mul_int(2), true)
);

pub const fn overflowing_add_unsigned( self, rhs: FixedU32<Frac> ) -> (FixedI32<Frac>, bool)

Overflowing addition with an unsigned fixed-point number.

Returns a tuple of the sum and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(
    Fix::from_num(-5).overflowing_add_unsigned(UFix::from_num(3)),
    (Fix::from_num(-2), false)
);
assert_eq!(
    Fix::ZERO.overflowing_add_unsigned(UFix::MAX),
    (-Fix::DELTA, true)
);

pub const fn overflowing_sub_unsigned( self, rhs: FixedU32<Frac> ) -> (FixedI32<Frac>, bool)

Overflowing subtraction with an unsigned fixed-point number.

Returns a tuple of the difference and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Examples

use fixed::{types::extra::U4, FixedI32, FixedU32};
type Fix = FixedI32<U4>;
type UFix = FixedU32<U4>;
assert_eq!(
    Fix::from_num(3).overflowing_sub_unsigned(UFix::from_num(5)),
    (Fix::from_num(-2), false)
);
assert_eq!(
    Fix::ZERO.overflowing_sub_unsigned(UFix::MAX),
    (Fix::DELTA, true)
);

impl<Frac: LeEqU32> FixedI32<Frac>

The implementation of items in this block depends on the number of fractional bits Frac.

pub const INT_NBITS: u32 = _

The number of integer bits.

Examples

use fixed::{types::extra::U6, FixedI32};
type Fix = FixedI32<U6>;
assert_eq!(Fix::INT_NBITS, 32 - 6);

pub const FRAC_NBITS: u32 = Frac::U32

The number of fractional bits.

Examples

use fixed::{types::extra::U6, FixedI32};
type Fix = FixedI32<U6>;
assert_eq!(Fix::FRAC_NBITS, 6);

pub fn from_num<Src: ToFixed>(src: Src) -> FixedI32<Frac>

Creates a fixed-point number from another number.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other number src for which ToFixed is implemented, in which case this method returns src.to_fixed().

Panics

For floating-point numbers, panics if the value is not finite.

When debug assertions are enabled, panics if the value does not fit. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_from_num instead.

Examples

use fixed::{types::extra::U4, types::I16F16, FixedI32};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = I16F16::from_bits(0b111 << (16 - 2));
assert_eq!(Fix::from_num(src), Fix::from_bits(0b111 << (4 - 2)));

assert_eq!(Fix::from_num(3i32), Fix::from_bits(3 << 4));
assert_eq!(Fix::from_num(-3i64), Fix::from_bits(-3 << 4));

assert_eq!(Fix::from_num(1.75f32), Fix::from_bits(0b111 << (4 - 2)));
assert_eq!(Fix::from_num(-1.75f64), Fix::from_bits(-0b111 << (4-2)));

pub fn to_num<Dst: FromFixed>(self) -> Dst

Converts a fixed-point number to another number.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize. Any fractional bits are discarded, which rounds towards −∞.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other type Dst for which FromFixed is implemented, in which case this method returns Dst::from_fixed(self).

Panics

When debug assertions are enabled, panics if the value does not fit. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_to_num instead.

Examples

use fixed::{types::extra::U4, types::I30F2, FixedI32};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = Fix::from_bits(0b111 << (4 - 2));
assert_eq!(src.to_num::<I30F2>(), I30F2::from_bits(0b111));
// src >> 2 is 0.0111, which for I30F2 is truncated to 0.01
assert_eq!((src >> 2u32).to_num::<I30F2>(), I30F2::from_bits(0b1));

// 2.5 is 10.1 in binary
let two_point_5 = Fix::from_bits(0b101 << (4 - 1));
assert_eq!(two_point_5.to_num::<i32>(), 2);
assert_eq!((-two_point_5).to_num::<i64>(), -3);

// 1.625 is 1.101 in binary
let one_point_625 = Fix::from_bits(0b1101 << (4 - 3));
assert_eq!(one_point_625.to_num::<f32>(), 1.625f32);
assert_eq!((-one_point_625).to_num::<f64>(), -1.625f64);

pub fn checked_from_num<Src: ToFixed>(src: Src) -> Option<FixedI32<Frac>>

Creates a fixed-point number from another number if it fits, otherwise returns None.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other number src for which ToFixed is implemented, in which case this method returns src.checked_to_fixed().

Examples

use fixed::{
    types::extra::{U2, U4},
    types::I16F16,
    FixedI32,
};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = I16F16::from_bits(0b111 << (16 - 2));
assert_eq!(Fix::checked_from_num(src), Some(Fix::from_bits(0b111 << (4 - 2))));
let too_large = FixedI32::<U2>::MAX;
assert!(Fix::checked_from_num(too_large).is_none());

assert_eq!(Fix::checked_from_num(3), Some(Fix::from_bits(3 << 4)));
let too_large = i32::MAX;
assert!(Fix::checked_from_num(too_large).is_none());
let too_small = i32::MIN;
assert!(Fix::checked_from_num(too_small).is_none());

// 1.75 is 1.11 in binary
let expected = Fix::from_bits(0b111 << (4 - 2));
assert_eq!(Fix::checked_from_num(1.75f32), Some(expected));
assert_eq!(Fix::checked_from_num(-1.75f64), Some(-expected));
assert!(Fix::checked_from_num(2e38).is_none());
assert!(Fix::checked_from_num(std::f64::NAN).is_none());

pub fn checked_to_num<Dst: FromFixed>(self) -> Option<Dst>

Converts a fixed-point number to another number if it fits, otherwise returns None.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize. Any fractional bits are discarded, which rounds towards −∞.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other type Dst for which FromFixed is implemented, in which case this method returns Dst::checked_from_fixed(self).

Examples

use fixed::{
    types::extra::{U0, U4, U6},
    types::I16F16,
    FixedI32,
};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = Fix::from_bits(0b111 << (4 - 2));
let expected = I16F16::from_bits(0b111 << (16 - 2));
assert_eq!(src.checked_to_num::<I16F16>(), Some(expected));
type TooFewIntBits = FixedI32<U6>;
assert!(Fix::MAX.checked_to_num::<TooFewIntBits>().is_none());

// 2.5 is 10.1 in binary
let two_point_5 = Fix::from_bits(0b101 << (4 - 1));
assert_eq!(two_point_5.checked_to_num::<i32>(), Some(2));
assert_eq!((-two_point_5).checked_to_num::<i64>(), Some(-3));
type AllInt = FixedI32<U0>;
assert!(AllInt::from_bits(-1).checked_to_num::<u32>().is_none());

// 1.625 is 1.101 in binary
let one_point_625 = Fix::from_bits(0b1101 << (4 - 3));
assert_eq!(one_point_625.checked_to_num::<f32>(), Some(1.625f32));

pub fn saturating_from_num<Src: ToFixed>(src: Src) -> FixedI32<Frac>

Creates a fixed-point number from another number, saturating if it does not fit.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other number src for which ToFixed is implemented, in which case this method returns src.saturating_to_fixed().

Panics

This method panics if the value is a floating-point NaN.

Examples

use fixed::{
    types::extra::{U2, U4},
    types::I16F16,
    FixedI32,
};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = I16F16::from_bits(0b111 << (16 - 2));
assert_eq!(Fix::saturating_from_num(src), Fix::from_bits(0b111 << (4 - 2)));
let too_large = FixedI32::<U2>::MAX;
assert_eq!(Fix::saturating_from_num(too_large), Fix::MAX);

assert_eq!(Fix::saturating_from_num(3), Fix::from_bits(3 << 4));
let too_small = i32::MIN;
assert_eq!(Fix::saturating_from_num(too_small), Fix::MIN);

// 1.75 is 1.11 in binary
let expected = Fix::from_bits(0b111 << (4 - 2));
assert_eq!(Fix::saturating_from_num(1.75f32), expected);
assert_eq!(Fix::saturating_from_num(-1.75f64), -expected);
assert_eq!(Fix::saturating_from_num(2e38), Fix::MAX);
assert_eq!(Fix::saturating_from_num(std::f64::NEG_INFINITY), Fix::MIN);

pub fn saturating_to_num<Dst: FromFixed>(self) -> Dst

Converts a fixed-point number to another number, saturating the value if it does not fit.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize. Any fractional bits are discarded, which rounds towards −∞.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other type Dst for which FromFixed is implemented, in which case this method returns Dst::saturating_from_fixed(self).

Examples

use fixed::{
    types::extra::{U0, U4, U6},
    types::I16F16,
    FixedI32,
};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = Fix::from_bits(0b111 << (4 - 2));
let expected = I16F16::from_bits(0b111 << (16 - 2));
assert_eq!(src.saturating_to_num::<I16F16>(), expected);
type TooFewIntBits = FixedI32<U6>;
let saturated = Fix::MAX.saturating_to_num::<TooFewIntBits>();
assert_eq!(saturated, TooFewIntBits::MAX);

// 2.5 is 10.1 in binary
let two_point_5 = Fix::from_bits(0b101 << (4 - 1));
assert_eq!(two_point_5.saturating_to_num::<i32>(), 2);
type AllInt = FixedI32<U0>;
assert_eq!(AllInt::from_bits(-1).saturating_to_num::<u32>(), 0);

// 1.625 is 1.101 in binary
let one_point_625 = Fix::from_bits(0b1101 << (4 - 3));
assert_eq!(one_point_625.saturating_to_num::<f32>(), 1.625f32);

pub fn wrapping_from_num<Src: ToFixed>(src: Src) -> FixedI32<Frac>

Creates a fixed-point number from another number, wrapping the value on overflow.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other number src for which ToFixed is implemented, in which case this method returns src.wrapping_to_fixed().

Panics

For floating-point numbers, panics if the value is not finite.

Examples

use fixed::{
    types::extra::{U0, U4},
    types::I16F16,
    FixedI32,
};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = I16F16::from_bits(0b111 << (16 - 2));
assert_eq!(Fix::wrapping_from_num(src), Fix::from_bits(0b111 << (4 - 2)));
// integer 0b1101 << (32 - 7) will wrap to fixed-point 1010...
let too_large = FixedI32::<U0>::from_bits(0b1101 << (32 - 7));
let wrapped = Fix::from_bits(0b1010 << (32 - 4));
assert_eq!(Fix::wrapping_from_num(too_large), wrapped);

// integer 0b1101 << (32 - 7) will wrap to fixed-point 1010...
let large: i32 = 0b1101 << (32 - 7);
let wrapped = Fix::from_bits(0b1010 << (32 - 4));
assert_eq!(Fix::wrapping_from_num(large), wrapped);

// 1.75 is 1.11 in binary
let expected = Fix::from_bits(0b111 << (4 - 2));
assert_eq!(Fix::wrapping_from_num(1.75f32), expected);
// 1.75 << (32 - 4) wraps to binary 11000...
let large = 1.75 * 2f32.powi(32 - 4);
let wrapped = Fix::from_bits(0b1100 << (32 - 4));
assert_eq!(Fix::wrapping_from_num(large), wrapped);

pub fn wrapping_to_num<Dst: FromFixed>(self) -> Dst

Converts a fixed-point number to another number, wrapping the value on overflow.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize. Any fractional bits are discarded, which rounds towards −∞.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other type Dst for which FromFixed is implemented, in which case this method returns Dst::wrapping_from_fixed(self).

Examples

use fixed::{
    types::extra::{U0, U4, U6},
    types::I16F16,
    FixedI32,
};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = Fix::from_bits(0b111 << (4 - 2));
let expected = I16F16::from_bits(0b111 << (16 - 2));
assert_eq!(src.wrapping_to_num::<I16F16>(), expected);
type TooFewIntBits = FixedI32<U6>;
let wrapped = TooFewIntBits::from_bits(Fix::MAX.to_bits() << 2);
assert_eq!(Fix::MAX.wrapping_to_num::<TooFewIntBits>(), wrapped);

// 2.5 is 10.1 in binary
let two_point_5 = Fix::from_bits(0b101 << (4 - 1));
assert_eq!(two_point_5.wrapping_to_num::<i32>(), 2);
type AllInt = FixedI32<U0>;
assert_eq!(AllInt::from_bits(-1).wrapping_to_num::<u32>(), u32::MAX);

// 1.625 is 1.101 in binary
let one_point_625 = Fix::from_bits(0b1101 << (4 - 3));
assert_eq!(one_point_625.wrapping_to_num::<f32>(), 1.625f32);

pub fn unwrapped_from_num<Src: ToFixed>(src: Src) -> FixedI32<Frac>

Creates a fixed-point number from another number, panicking on overflow.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other number src for which ToFixed is implemented, in which case this method returns src.unwrapped_to_fixed().

Panics

Panics if the value does not fit.

For floating-point numbers, also panics if the value is not finite.

Examples

use fixed::{
    types::{extra::U4, I16F16},
    FixedI32,
};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = I16F16::from_bits(0b111 << (16 - 2));
assert_eq!(Fix::unwrapped_from_num(src), Fix::from_bits(0b111 << (4 - 2)));

The following panics because of overflow.

use fixed::{
    types::extra::{U0, U4},
    FixedI32,
};
type Fix = FixedI32<U4>;
let too_large = FixedI32::<U0>::from_bits(0b1101 << (32 - 7));
let _overflow = Fix::unwrapped_from_num(too_large);

pub fn unwrapped_to_num<Dst: FromFixed>(self) -> Dst

Converts a fixed-point number to another number, panicking on overflow.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize. Any fractional bits are discarded, which rounds towards −∞.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other type Dst for which FromFixed is implemented, in which case this method returns Dst::unwrapped_from_fixed(self).

Panics

Panics if the value does not fit.

Examples

use fixed::{
    types::{extra::U4, I16F16},
    FixedI32,
};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = Fix::from_bits(0b111 << (4 - 2));
let expected = I16F16::from_bits(0b111 << (16 - 2));
assert_eq!(src.unwrapped_to_num::<I16F16>(), expected);

The following panics because of overflow.

use fixed::{
    types::extra::{U4, U6},
    FixedI32,
};
type Fix = FixedI32<U4>;
type TooFewIntBits = FixedI32<U6>;
let _overflow = Fix::MAX.unwrapped_to_num::<TooFewIntBits>();

pub fn overflowing_from_num<Src: ToFixed>(src: Src) -> (FixedI32<Frac>, bool)

Creates a fixed-point number from another number.

Returns a tuple of the fixed-point number and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other number src for which ToFixed is implemented, in which case this method returns src.overflowing_to_fixed().

Panics

For floating-point numbers, panics if the value is not finite.

Examples

use fixed::{
    types::extra::{U0, U4},
    types::I16F16,
    FixedI32,
};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = I16F16::from_bits(0b111 << (16 - 2));
let expected = Fix::from_bits(0b111 << (4 - 2));
assert_eq!(Fix::overflowing_from_num(src), (expected, false));
// integer 0b1101 << (32 - 7) will wrap to fixed-point 1010...
let too_large = FixedI32::<U0>::from_bits(0b1101 << (32 - 7));
let wrapped = Fix::from_bits(0b1010 << (32 - 4));
assert_eq!(Fix::overflowing_from_num(too_large), (wrapped, true));

assert_eq!(Fix::overflowing_from_num(3), (Fix::from_bits(3 << 4), false));
// integer 0b1101 << (32 - 7) will wrap to fixed-point 1010...
let large: i32 = 0b1101 << (32 - 7);
let wrapped = Fix::from_bits(0b1010 << (32 - 4));
assert_eq!(Fix::overflowing_from_num(large), (wrapped, true));

// 1.75 is 1.11 in binary
let expected = Fix::from_bits(0b111 << (4 - 2));
assert_eq!(Fix::overflowing_from_num(1.75f32), (expected, false));
// 1.75 << (32 - 4) wraps to binary 11000...
let large = 1.75 * 2f32.powi(32 - 4);
let wrapped = Fix::from_bits(0b1100 << (32 - 4));
assert_eq!(Fix::overflowing_from_num(large), (wrapped, true));

pub fn overflowing_to_num<Dst: FromFixed>(self) -> (Dst, bool)

Converts a fixed-point number to another number.

Returns a tuple of the number and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

The other number can be:

• Another fixed-point number. Any extra fractional bits are discarded, which rounds towards −∞.
• An integer of type i8, i16, i32, i64, i128, isize, u8, u16, u32, u64, u128, or usize. Any fractional bits are discarded, which rounds towards −∞.
• A floating-point number of type f16, bf16, f32, f64 or F128. For this conversion, the method rounds to the nearest, with ties rounding to even.
• Any other type Dst for which FromFixed is implemented, in which case this method returns Dst::overflowing_from_fixed(self).

Examples

use fixed::{
    types::extra::{U0, U4, U6},
    types::I16F16,
    FixedI32,
};
type Fix = FixedI32<U4>;

// 1.75 is 1.11 in binary
let src = Fix::from_bits(0b111 << (4 - 2));
let expected = I16F16::from_bits(0b111 << (16 - 2));
assert_eq!(src.overflowing_to_num::<I16F16>(), (expected, false));
type TooFewIntBits = FixedI32<U6>;
let wrapped = TooFewIntBits::from_bits(Fix::MAX.to_bits() << 2);
assert_eq!(Fix::MAX.overflowing_to_num::<TooFewIntBits>(), (wrapped, true));

// 2.5 is 10.1 in binary
let two_point_5 = Fix::from_bits(0b101 << (4 - 1));
assert_eq!(two_point_5.overflowing_to_num::<i32>(), (2, false));
let does_not_fit = FixedI32::<U0>::from_bits(-1);
let wrapped = 1u32.wrapping_neg();
assert_eq!(does_not_fit.overflowing_to_num::<u32>(), (wrapped, true));

// 1.625 is 1.101 in binary
let one_point_625 = Fix::from_bits(0b1101 << (4 - 3));
assert_eq!(one_point_625.overflowing_to_num::<f32>(), (1.625f32, false));

pub const fn const_from_fixed<SrcFrac: LeEqU32>( src: FixedI32<SrcFrac> ) -> FixedI32<Frac>

Creates a fixed-point number from a fixed-point number with the same underlying integer type. Usable in constant context.

This is equivalent to the unwrapped_from_num method with FixedI32<SrcFrac> as its generic parameter, but can also be used in constant context. Unless required in constant context, use unwrapped_from_num or from_num instead.

Planned deprecation

This method will be deprecated when the unwrapped_from_num method is usable in constant context.

Panics

Panics if the value does not fit.

Examples

use fixed::types::extra::{U2, U4};
use fixed::FixedI32;
type FixA = FixedI32<U2>;
type FixB = FixedI32<U4>;
const A: FixA = FixA::unwrapped_from_str("3.5");
const B: FixB = FixB::const_from_fixed(A);
assert_eq!(B, 3.5);

The following would fail to compile because of overflow.

use fixed::types::extra::{U2, U4};
use fixed::FixedI32;
const _OVERFLOW: FixedI32<U4> = FixedI32::const_from_fixed(FixedI32::<U2>::MAX);

pub const fn const_from_int(src: i32) -> FixedI32<Frac>

Creates a fixed-point number from the underlying integer type i32. Usable in constant context.

This is equivalent to the unwrapped_from_num method with i32 as its generic parameter, but can also be used in constant context. Unless required in constant context, use unwrapped_from_num or from_num instead.

Planned deprecation

This method will be deprecated when the unwrapped_from_num method is usable in constant context.

Panics

Panics if the value does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
const FIVE: Fix = Fix::const_from_int(5);
assert_eq!(FIVE, 5);

The following would fail to compile because of overflow.

use fixed::{types::extra::U4, FixedI32};
const _OVERFLOW: FixedI32<U4> = FixedI32::const_from_int(i32::MAX);

pub const fn lit(src: &str) -> FixedI32<Frac>

Parses a fixed-point literal.

Rounding is to the nearest, with ties rounded to even.

This is similar to from_str but accepts a prefix for setting the radix, and ignores underscores, such that the parsing is more similar to numeric literals in Rust code.

The string can start with “-” for a negative number.

Strings starting with “0b” are parsed as binary, strings starting with “0o” are parsed as octal, and strings starting with “0x” are parsed as hexadecimal.

Exponents are supported as well. For decimal, binary and octal numbers, the separator “e” or “E” can be used to start an exponent, which is then followed by an optional sign “+” or “-”, and then by a decimal integer which is the exponent. For hexadecimal numbers, since “e” and “E” are hexadecimal digits, the separator “@” has to be used instead. The separator “@” is accepted for all radices. The parsed value is scaled by the radix to the power of the exponent.

For binary, octal and hexadecimal, base-2 exponents are supported too, using the separator “p” or “P”. The parsed value is scaled by 2 to the power of the exponent. For example, for hexadecimal “P8” means ×2⁸, and is equivalent to “@2” which means ×16².

Constants

The lit method is useful to write constant fixed-point literals, and can be evaluated in constant context.

Warning: Normal calls to the lit method are not evaluated at compile time. To ensure that the call is evaluated at compile time, lit must be used to initialize a constant.

For example, here lit would be evaluated at compile time:

const ONE_AND_HALF: Fix = Fix::lit("1.5");

However, here lit would be evaluated at run time:

let one_and_half = Fix::lit("1.5");

To evaluate at compile time without introducing a constant into the scope:

let one_and_half = {
    const C: Fix = Fix::lit("1.5");
    C
};

With the unstable inline_const feature, here lit would be evaluated at compile time:

#![feature(inline_const)]
let one_and_half = const { Fix::lit("1.5") };

Panics

Panics if the number is not valid or overflows.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;

assert_eq!(Fix::lit("1.75"), 1.75);
assert_eq!(Fix::lit("1_.7_5_"), 1.75);
assert_eq!(Fix::lit("17.5e-1"), 1.75);
assert_eq!(Fix::lit("0_.017_5_e+0_2"), 1.75);
assert_eq!(Fix::lit("-01.75"), -1.75);

assert_eq!(Fix::lit("0b1.11"), 1.75);
assert_eq!(Fix::lit("0b_111e-2"), 1.75);
assert_eq!(Fix::lit("-0b1.11"), -1.75);

assert_eq!(Fix::lit("0o1.6"), 1.75);
assert_eq!(Fix::lit("0o.16E1"), 1.75);
assert_eq!(Fix::lit("0o7p-2"), 1.75);

assert_eq!(Fix::lit("0x1.C"), 1.75);
assert_eq!(Fix::lit("0x0.1C@1"), 1.75);
assert_eq!(Fix::lit("-0x1.C"), -1.75);

This method is useful to write constant fixed-point literals.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
const ONE_AND_HALF: Fix = Fix::lit("1.5");
assert_eq!(ONE_AND_HALF, 1.5);

pub const fn from_str(src: &str) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing decimal digits to return a fixed-point number.

Rounding is to the nearest, with ties rounded to even.

The number can have an optional exponent. The separator “e”, “E” or “@” can be used to start an exponent, which is then followed by an optional sign “+” or “-”, and then by a decimal integer which is the exponent. The parsed value is scaled by 10 to the power of the exponent.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_str("1.75"), Ok(Fix::from_num(1.75)));
assert_eq!(Fix::from_str("-1.75"), Ok(Fix::from_num(-1.75)));
assert_eq!(Fix::from_str("0.00625E+3"), Ok(Fix::from_num(6.25)));
assert_eq!(Fix::from_str("1.25e-1"), Ok(Fix::from_num(0.125)));

pub const fn from_str_binary( src: &str ) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing binary digits to return a fixed-point number.

Rounding is to the nearest, with ties rounded to even.

The number can have an optional exponent. The separator “e”, “E” or “@” can be used to start an exponent, which is then followed by an optional sign “+” or “-”, and then by a decimal integer which is the exponent. The parsed value is scaled by the radix (2 for binary) to the power of the exponent.

Base-2 exponents are supported too, using the separator “p” or “P”. The parsed value is scaled by 2 to the power of the exponent. For binary, since the radix is 2, base-2 exponents are equivalent to the other form of exponent.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.11 in binary is 1.75
assert_eq!(Fix::from_str_binary("1.11"), Ok(Fix::from_num(1.75)));
assert_eq!(Fix::from_str_binary("-1.11"), Ok(Fix::from_num(-1.75)));

// 111.0101 in binary is 7.3125
assert_eq!(Fix::from_str_binary("1.110101e2"), Ok(Fix::from_num(7.3125)));
assert_eq!(Fix::from_str_binary("11101.01e-2"), Ok(Fix::from_num(7.3125)));

pub const fn from_str_octal( src: &str ) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing octal digits to return a fixed-point number.

Rounding is to the nearest, with ties rounded to even.

The number can have an optional exponent. The separator “e”, “E” or “@” can be used to start an exponent, which is then followed by an optional sign “+” or “-”, and then by a decimal integer which is the exponent. The parsed value is scaled by 8 to the power of the exponent.

Base-2 exponents are supported too, using the separator “p” or “P”. The parsed value is scaled by 2 to the power of the exponent. For example, for octal “P6” means ×2⁶, and is equivalent to “E2” which means ×8².

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.75 is 1.11 in binary, 1.6 in octal
let f = Fix::from_str_octal("1.6");
let check = Fix::from_bits(0b111 << (4 - 2));
assert_eq!(f, Ok(check));
let neg = Fix::from_str_octal("-1.6");
assert_eq!(neg, Ok(-check));
assert_eq!(Fix::from_str_octal("160e-2"), Ok(check));

pub const fn from_str_hex(src: &str) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing hexadecimal digits to return a fixed-point number.

Rounding is to the nearest, with ties rounded to even.

The number can have an optional exponent. Since “e” and “E” are valid hexadecimal digits, they cannot be used as a separator to start an exponent, so “@” is used instead. This is then followed by an optional sign “+” or “-”, and then by a decimal integer which is the exponent. The parsed value is scaled by 16 to the power of the exponent.

Base-2 exponents are supported too, using the separator “p” or “P”. The parsed value is scaled by 2 to the power of the exponent. For example, for hexadecimal “P8” means ×2⁸, and is equivalent to “@2” which means ×16².

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.C in hexadecimal is 1.75
assert_eq!(Fix::from_str_hex("1.C"), Ok(Fix::from_num(1.75)));
assert_eq!(Fix::from_str_hex("-1.C"), Ok(Fix::from_num(-1.75)));
assert_eq!(Fix::from_str_hex("1C@-1"), Ok(Fix::from_num(1.75)));
assert_eq!(Fix::from_str_hex(".01C@+2"), Ok(Fix::from_num(1.75)));

pub const fn saturating_from_str( src: &str ) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing decimal digits to return a fixed-point number, saturating on overflow.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
assert_eq!(I8F8::saturating_from_str("9999"), Ok(I8F8::MAX));
assert_eq!(I8F8::saturating_from_str("-9999"), Ok(I8F8::MIN));

pub const fn saturating_from_str_binary( src: &str ) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing binary digits to return a fixed-point number, saturating on overflow.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
assert_eq!(I8F8::saturating_from_str_binary("101100111000"), Ok(I8F8::MAX));
assert_eq!(I8F8::saturating_from_str_binary("-101100111000"), Ok(I8F8::MIN));

pub const fn saturating_from_str_octal( src: &str ) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing octal digits to return a fixed-point number, saturating on overflow.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
assert_eq!(I8F8::saturating_from_str_octal("7777"), Ok(I8F8::MAX));
assert_eq!(I8F8::saturating_from_str_octal("-7777"), Ok(I8F8::MIN));

pub const fn saturating_from_str_hex( src: &str ) -> Result<FixedI32<Frac>, ParseFixedError>

Prases a string slice containing hexadecimal digits to return a fixed-point number, saturating on overflow.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
assert_eq!(I8F8::saturating_from_str_hex("FFFF"), Ok(I8F8::MAX));
assert_eq!(I8F8::saturating_from_str_hex("-FFFF"), Ok(I8F8::MIN));

pub const fn wrapping_from_str( src: &str ) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing decimal digits to return a fixed-point number, wrapping on overflow.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
// 9999.5 = 15.5 + 256 × n
assert_eq!(I8F8::wrapping_from_str("9999.5"), Ok(I8F8::from_num(15.5)));
assert_eq!(I8F8::wrapping_from_str("-9999.5"), Ok(I8F8::from_num(-15.5)));

pub const fn wrapping_from_str_binary( src: &str ) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing binary digits to return a fixed-point number, wrapping on overflow.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
let check = I8F8::from_bits(0b1110001 << (8 - 1));
assert_eq!(I8F8::wrapping_from_str_binary("101100111000.1"), Ok(check));
assert_eq!(I8F8::wrapping_from_str_binary("-101100111000.1"), Ok(-check));

pub const fn wrapping_from_str_octal( src: &str ) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing octal digits to return a fixed-point number, wrapping on overflow.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
let check = I8F8::from_bits(0o1654 << (8 - 3));
assert_eq!(I8F8::wrapping_from_str_octal("7165.4"), Ok(check));
assert_eq!(I8F8::wrapping_from_str_octal("-7165.4"), Ok(-check));

pub const fn wrapping_from_str_hex( src: &str ) -> Result<FixedI32<Frac>, ParseFixedError>

Parses a string slice containing hexadecimal digits to return a fixed-point number, wrapping on overflow.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
let check = I8F8::from_bits(0xFFE);
assert_eq!(I8F8::wrapping_from_str_hex("C0F.FE"), Ok(check));
assert_eq!(I8F8::wrapping_from_str_hex("-C0F.FE"), Ok(-check));

pub const fn unwrapped_from_str(src: &str) -> FixedI32<Frac>

Parses a string slice containing decimal digits to return a fixed-point number, panicking on overflow.

Rounding is to the nearest, with ties rounded to even.

Panics

Panics if the value does not fit or if there is a parsing error.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.75 is 1.11 in binary
let f = Fix::unwrapped_from_str("1.75");
assert_eq!(f, Fix::from_bits(0b111 << (4 - 2)));

The following panics because of a parsing error.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _error = Fix::unwrapped_from_str("1.75.");

pub const fn unwrapped_from_str_binary(src: &str) -> FixedI32<Frac>

Parses a string slice containing binary digits to return a fixed-point number, panicking on overflow.

Rounding is to the nearest, with ties rounded to even.

Panics

Panics if the value does not fit or if there is a parsing error.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.75 is 1.11 in binary
let f = Fix::unwrapped_from_str_binary("1.11");
assert_eq!(f, Fix::from_bits(0b111 << (4 - 2)));

The following panics because of a parsing error.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _error = Fix::unwrapped_from_str_binary("1.2");

pub const fn unwrapped_from_str_octal(src: &str) -> FixedI32<Frac>

Parses a string slice containing octal digits to return a fixed-point number, panicking on overflow.

Rounding is to the nearest, with ties rounded to even.

Panics

Panics if the value does not fit or if there is a parsing error.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.75 is 1.11 in binary, 1.6 in octal
let f = Fix::unwrapped_from_str_octal("1.6");
assert_eq!(f, Fix::from_bits(0b111 << (4 - 2)));

The following panics because of a parsing error.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _error = Fix::unwrapped_from_str_octal("1.8");

pub const fn unwrapped_from_str_hex(src: &str) -> FixedI32<Frac>

Parses a string slice containing hexadecimal digits to return a fixed-point number, wrapping on overflow.

Rounding is to the nearest, with ties rounded to even.

Panics

Panics if the value does not fit or if there is a parsing error.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 1.75 is 1.11 in binary, 1.C in hexadecimal
let f = Fix::unwrapped_from_str_hex("1.C");
assert_eq!(f, Fix::from_bits(0b111 << (4 - 2)));

The following panics because of a parsing error.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _error = Fix::unwrapped_from_str_hex("1.G");

pub const fn overflowing_from_str( src: &str ) -> Result<(FixedI32<Frac>, bool), ParseFixedError>

Parses a string slice containing decimal digits to return a fixed-point number.

Returns a tuple of the fixed-point number and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
assert_eq!(I8F8::overflowing_from_str("99.5"), Ok((I8F8::from_num(99.5), false)));
// 9999.5 = 15.5 + 256 × n
assert_eq!(I8F8::overflowing_from_str("-9999.5"), Ok((I8F8::from_num(-15.5), true)));

pub const fn overflowing_from_str_binary( src: &str ) -> Result<(FixedI32<Frac>, bool), ParseFixedError>

Parses a string slice containing binary digits to return a fixed-point number.

Returns a tuple of the fixed-point number and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
let check = I8F8::from_bits(0b1110001 << (8 - 1));
assert_eq!(I8F8::overflowing_from_str_binary("111000.1"), Ok((check, false)));
assert_eq!(I8F8::overflowing_from_str_binary("-101100111000.1"), Ok((-check, true)));

pub const fn overflowing_from_str_octal( src: &str ) -> Result<(FixedI32<Frac>, bool), ParseFixedError>

Parses a string slice containing octal digits to return a fixed-point number.

Returns a tuple of the fixed-point number and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
let check = I8F8::from_bits(0o1654 << (8 - 3));
assert_eq!(I8F8::overflowing_from_str_octal("165.4"), Ok((check, false)));
assert_eq!(I8F8::overflowing_from_str_octal("-7165.4"), Ok((-check, true)));

pub const fn overflowing_from_str_hex( src: &str ) -> Result<(FixedI32<Frac>, bool), ParseFixedError>

Parses a string slice containing hexadecimal digits to return a fixed-point number.

Returns a tuple of the fixed-point number and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Rounding is to the nearest, with ties rounded to even.

Examples

use fixed::types::I8F8;
let check = I8F8::from_bits(0xFFE);
assert_eq!(I8F8::overflowing_from_str_hex("F.FE"), Ok((check, false)));
assert_eq!(I8F8::overflowing_from_str_hex("-C0F.FE"), Ok((-check, true)));

pub const fn int(self) -> FixedI32<Frac>

Returns the integer part.

Note that since the numbers are stored in two’s complement, negative numbers with non-zero fractional parts will be rounded towards −∞, except in the case where there are no integer bits, that is FixedI32<U32>, where the return value is always zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 0010.0000
let two = Fix::from_num(2);
// 0010.0100
let two_and_quarter = two + two / 8;
assert_eq!(two_and_quarter.int(), two);
// 1101.0000
let three = Fix::from_num(3);
// 1101.1100
assert_eq!((-two_and_quarter).int(), -three);

pub const fn frac(self) -> FixedI32<Frac>

Returns the fractional part.

Note that since the numbers are stored in two’s complement, the returned fraction will be non-negative for negative numbers, except in the case where there are no integer bits, that is FixedI32<U32> where the return value is always equal to self.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
// 0000.0100
let quarter = Fix::ONE / 4;
// 0010.0100
let two_and_quarter = quarter * 9;
assert_eq!(two_and_quarter.frac(), quarter);
// 0000.1100
let three_quarters = quarter * 3;
// 1101.1100
assert_eq!((-two_and_quarter).frac(), three_quarters);

pub const fn round_to_zero(self) -> FixedI32<Frac>

Rounds to the next integer towards 0.

Note that for negative numbers, this is different from truncating/discarding the fractional bits. This is because in two’s-complement representations, the value of all the bits except for the most significant bit is positive; discarding positive bits would round towards −∞ unlike this method which rounds towards zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.1).round_to_zero(), Fix::from_num(2));
assert_eq!(Fix::from_num(2.9).round_to_zero(), Fix::from_num(2));
assert_eq!(Fix::from_num(-2.1).round_to_zero(), Fix::from_num(-2));
assert_eq!(Fix::from_num(-2.9).round_to_zero(), Fix::from_num(-2));

pub const fn ceil(self) -> FixedI32<Frac>

Rounds to the next integer towards +∞.

Panics

When debug assertions are enabled, panics if the result does not fit. When debug assertions are not enabled, the wrapped result can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_ceil instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).ceil(), Fix::from_num(3));
assert_eq!(Fix::from_num(-2.5).ceil(), Fix::from_num(-2));

pub const fn floor(self) -> FixedI32<Frac>

Rounds to the next integer towards −∞.

Panics

When debug assertions are enabled, panics if the result does not fit. When debug assertions are not enabled, the wrapped result can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_floor instead.

Overflow can only occur when there are zero integer bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).floor(), Fix::from_num(2));
assert_eq!(Fix::from_num(-2.5).floor(), Fix::from_num(-3));

pub const fn round(self) -> FixedI32<Frac>

Rounds to the nearest integer, with ties rounded away from zero.

Panics

When debug assertions are enabled, panics if the result does not fit. When debug assertions are not enabled, the wrapped result can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_round instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).round(), Fix::from_num(3));
assert_eq!(Fix::from_num(-2.5).round(), Fix::from_num(-3));

pub const fn round_ties_to_even(self) -> FixedI32<Frac>

Rounds to the nearest integer, with ties rounded to even.

Panics

When debug assertions are enabled, panics if the result does not fit. When debug assertions are not enabled, the wrapped result can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_round_ties_to_even instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).round_ties_to_even(), Fix::from_num(2));
assert_eq!(Fix::from_num(3.5).round_ties_to_even(), Fix::from_num(4));

pub const fn checked_ceil(self) -> Option<FixedI32<Frac>>

Checked ceil. Rounds to the next integer towards +∞, returning None on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).checked_ceil(), Some(Fix::from_num(3)));
assert_eq!(Fix::from_num(-2.5).checked_ceil(), Some(Fix::from_num(-2)));
assert!(Fix::MAX.checked_ceil().is_none());

pub const fn checked_floor(self) -> Option<FixedI32<Frac>>

Checked floor. Rounds to the next integer towards −∞. Returns None on overflow.

Overflow can only occur when there are zero integer bits.

Examples

use fixed::{
    types::extra::{U4, U32},
    FixedI32,
};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).checked_floor(), Some(Fix::from_num(2)));
assert_eq!(Fix::from_num(-2.5).checked_floor(), Some(Fix::from_num(-3)));
type AllFrac = FixedI32<U32>;
assert!(AllFrac::MIN.checked_floor().is_none());

pub const fn checked_round(self) -> Option<FixedI32<Frac>>

Checked round. Rounds to the nearest integer, with ties rounded away from zero, returning None on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).checked_round(), Some(Fix::from_num(3)));
assert_eq!(Fix::from_num(-2.5).checked_round(), Some(Fix::from_num(-3)));
assert!(Fix::MAX.checked_round().is_none());

pub const fn checked_round_ties_to_even(self) -> Option<FixedI32<Frac>>

Checked round. Rounds to the nearest integer, with ties rounded to even, returning None on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).checked_round_ties_to_even(), Some(Fix::from_num(2)));
assert_eq!(Fix::from_num(3.5).checked_round_ties_to_even(), Some(Fix::from_num(4)));
assert!(Fix::MAX.checked_round_ties_to_even().is_none());

pub const fn saturating_ceil(self) -> FixedI32<Frac>

Saturating ceil. Rounds to the next integer towards +∞, saturating on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).saturating_ceil(), Fix::from_num(3));
assert_eq!(Fix::from_num(-2.5).saturating_ceil(), Fix::from_num(-2));
assert_eq!(Fix::MAX.saturating_ceil(), Fix::MAX);

pub const fn saturating_floor(self) -> FixedI32<Frac>

Saturating floor. Rounds to the next integer towards −∞, saturating on overflow.

Overflow can only occur when there are zero integer bits.

Examples

use fixed::{
    types::extra::{U4, U32},
    FixedI32,
};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).saturating_floor(), Fix::from_num(2));
assert_eq!(Fix::from_num(-2.5).saturating_floor(), Fix::from_num(-3));
type AllFrac = FixedI32<U32>;
assert_eq!(AllFrac::MIN.saturating_floor(), AllFrac::MIN);

pub const fn saturating_round(self) -> FixedI32<Frac>

Saturating round. Rounds to the nearest integer, with ties rounded away from zero, and saturating on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).saturating_round(), Fix::from_num(3));
assert_eq!(Fix::from_num(-2.5).saturating_round(), Fix::from_num(-3));
assert_eq!(Fix::MAX.saturating_round(), Fix::MAX);

pub const fn saturating_round_ties_to_even(self) -> FixedI32<Frac>

Saturating round. Rounds to the nearest integer, with ties rounded to even, and saturating on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).saturating_round_ties_to_even(), Fix::from_num(2));
assert_eq!(Fix::from_num(3.5).saturating_round_ties_to_even(), Fix::from_num(4));
assert_eq!(Fix::MAX.saturating_round_ties_to_even(), Fix::MAX);

pub const fn wrapping_ceil(self) -> FixedI32<Frac>

Wrapping ceil. Rounds to the next integer towards +∞, wrapping on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).wrapping_ceil(), Fix::from_num(3));
assert_eq!(Fix::from_num(-2.5).wrapping_ceil(), Fix::from_num(-2));
assert_eq!(Fix::MAX.wrapping_ceil(), Fix::MIN);

pub const fn wrapping_floor(self) -> FixedI32<Frac>

Wrapping floor. Rounds to the next integer towards −∞, wrapping on overflow.

Overflow can only occur when there are zero integer bits.

Examples

use fixed::{
    types::extra::{U4, U32},
    FixedI32,
};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).wrapping_floor(), Fix::from_num(2));
assert_eq!(Fix::from_num(-2.5).wrapping_floor(), Fix::from_num(-3));
type AllFrac = FixedI32<U32>;
assert_eq!(AllFrac::MIN.wrapping_floor(), AllFrac::ZERO);

pub const fn wrapping_round(self) -> FixedI32<Frac>

Wrapping round. Rounds to the next integer to the nearest, with ties rounded away from zero, and wrapping on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).wrapping_round(), Fix::from_num(3));
assert_eq!(Fix::from_num(-2.5).wrapping_round(), Fix::from_num(-3));
assert_eq!(Fix::MAX.wrapping_round(), Fix::MIN);

pub const fn wrapping_round_ties_to_even(self) -> FixedI32<Frac>

Wrapping round. Rounds to the next integer to the nearest, with ties rounded to even, and wrapping on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).wrapping_round_ties_to_even(), Fix::from_num(2));
assert_eq!(Fix::from_num(3.5).wrapping_round_ties_to_even(), Fix::from_num(4));
assert_eq!(Fix::MAX.wrapping_round_ties_to_even(), Fix::MIN);

pub const fn unwrapped_ceil(self) -> FixedI32<Frac>

Unwrapped ceil. Rounds to the next integer towards +∞, panicking on overflow.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).unwrapped_ceil(), Fix::from_num(3));
assert_eq!(Fix::from_num(-2.5).unwrapped_ceil(), Fix::from_num(-2));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MAX.unwrapped_ceil();

pub const fn unwrapped_floor(self) -> FixedI32<Frac>

Unwrapped floor. Rounds to the next integer towards −∞, panicking on overflow.

Overflow can only occur when there are zero integer bits.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).unwrapped_floor(), Fix::from_num(2));
assert_eq!(Fix::from_num(-2.5).unwrapped_floor(), Fix::from_num(-3));

The following panics because of overflow.

use fixed::{types::extra::U32, FixedI32};
type AllFrac = FixedI32<U32>;
let _overflow = AllFrac::MIN.unwrapped_floor();

pub const fn unwrapped_round(self) -> FixedI32<Frac>

Unwrapped round. Rounds to the next integer to the nearest, with ties rounded away from zero, and panicking on overflow.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).unwrapped_round(), Fix::from_num(3));
assert_eq!(Fix::from_num(-2.5).unwrapped_round(), Fix::from_num(-3));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MAX.unwrapped_round();

pub const fn unwrapped_round_ties_to_even(self) -> FixedI32<Frac>

Unwrapped round. Rounds to the next integer to the nearest, with ties rounded to even, and panicking on overflow.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).unwrapped_round_ties_to_even(), Fix::from_num(2));
assert_eq!(Fix::from_num(3.5).unwrapped_round_ties_to_even(), Fix::from_num(4));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MAX.unwrapped_round_ties_to_even();

pub const fn overflowing_ceil(self) -> (FixedI32<Frac>, bool)

Overflowing ceil. Rounds to the next integer towards +∞.

Returns a tuple of the fixed-point number and a bool, indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).overflowing_ceil(), (Fix::from_num(3), false));
assert_eq!(Fix::from_num(-2.5).overflowing_ceil(), (Fix::from_num(-2), false));
assert_eq!(Fix::MAX.overflowing_ceil(), (Fix::MIN, true));

pub const fn overflowing_floor(self) -> (FixedI32<Frac>, bool)

Overflowing floor. Rounds to the next integer towards −∞.

Returns a tuple of the fixed-point number and a bool, indicating whether an overflow has occurred. On overflow, the wrapped value isreturned. Overflow can only occur when there are zero integer bits.

Examples

use fixed::{
    types::extra::{U4, U32},
    FixedI32,
};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).overflowing_floor(), (Fix::from_num(2), false));
assert_eq!(Fix::from_num(-2.5).overflowing_floor(), (Fix::from_num(-3), false));
type AllFrac = FixedI32<U32>;
assert_eq!(AllFrac::MIN.overflowing_floor(), (AllFrac::ZERO, true));

pub const fn overflowing_round(self) -> (FixedI32<Frac>, bool)

Overflowing round. Rounds to the next integer to the nearest, with ties rounded away from zero.

Returns a tuple of the fixed-point number and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).overflowing_round(), (Fix::from_num(3), false));
assert_eq!(Fix::from_num(-2.5).overflowing_round(), (Fix::from_num(-3), false));
assert_eq!(Fix::MAX.overflowing_round(), (Fix::MIN, true));

pub const fn overflowing_round_ties_to_even(self) -> (FixedI32<Frac>, bool)

Overflowing round. Rounds to the next integer to the nearest, with ties rounded to even.

Returns a tuple of the fixed-point number and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2.5).overflowing_round_ties_to_even(), (Fix::from_num(2), false));
assert_eq!(Fix::from_num(3.5).overflowing_round_ties_to_even(), (Fix::from_num(4), false));
assert_eq!(Fix::MAX.overflowing_round_ties_to_even(), (Fix::MIN, true));

pub const fn int_log2(self) -> i32

Integer base-2 logarithm, rounded down.

Panics

Panics if the fixed-point number is ≤ 0.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(4).int_log2(), 2);
assert_eq!(Fix::from_num(3.9375).int_log2(), 1);
assert_eq!(Fix::from_num(0.25).int_log2(), -2);
assert_eq!(Fix::from_num(0.1875).int_log2(), -3);

pub const fn int_log10(self) -> i32

Integer base-10 logarithm, rounded down.

Panics

Panics if the fixed-point number is ≤ 0.

Examples

use fixed::{
    types::extra::{U2, U6},
    FixedI32,
};
assert_eq!(FixedI32::<U2>::from_num(10).int_log10(), 1);
assert_eq!(FixedI32::<U2>::from_num(9.75).int_log10(), 0);
assert_eq!(FixedI32::<U6>::from_num(0.109375).int_log10(), -1);
assert_eq!(FixedI32::<U6>::from_num(0.09375).int_log10(), -2);

pub const fn int_log(self, base: u32) -> i32

Integer logarithm to the specified base, rounded down.

Panics

Panics if the fixed-point number is ≤ 0 or if the base is < 2.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(4).int_log(2), 2);
assert_eq!(Fix::from_num(5.75).int_log(5), 1);
assert_eq!(Fix::from_num(0.25).int_log(5), -1);
assert_eq!(Fix::from_num(0.1875).int_log(5), -2);

pub const fn checked_int_log2(self) -> Option<i32>

Checked integer base-2 logarithm, rounded down. Returns the logarithm or None if the fixed-point number is ≤ 0.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::ZERO.checked_int_log2(), None);
assert_eq!(Fix::from_num(4).checked_int_log2(), Some(2));
assert_eq!(Fix::from_num(3.9375).checked_int_log2(), Some(1));
assert_eq!(Fix::from_num(0.25).checked_int_log2(), Some(-2));
assert_eq!(Fix::from_num(0.1875).checked_int_log2(), Some(-3));

pub const fn checked_int_log10(self) -> Option<i32>

Checked integer base-10 logarithm, rounded down. Returns the logarithm or None if the fixed-point number is ≤ 0.

Examples

use fixed::{
    types::extra::{U2, U6},
    FixedI32,
};
assert_eq!(FixedI32::<U2>::ZERO.checked_int_log10(), None);
assert_eq!(FixedI32::<U2>::from_num(10).checked_int_log10(), Some(1));
assert_eq!(FixedI32::<U2>::from_num(9.75).checked_int_log10(), Some(0));
assert_eq!(FixedI32::<U6>::from_num(0.109375).checked_int_log10(), Some(-1));
assert_eq!(FixedI32::<U6>::from_num(0.09375).checked_int_log10(), Some(-2));

pub const fn checked_int_log(self, base: u32) -> Option<i32>

Checked integer logarithm to the specified base, rounded down. Returns the logarithm, or None if the fixed-point number is ≤ 0 or if the base is < 2.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::ZERO.checked_int_log(5), None);
assert_eq!(Fix::from_num(4).checked_int_log(2), Some(2));
assert_eq!(Fix::from_num(5.75).checked_int_log(5), Some(1));
assert_eq!(Fix::from_num(0.25).checked_int_log(5), Some(-1));
assert_eq!(Fix::from_num(0.1875).checked_int_log(5), Some(-2));

pub const fn signum(self) -> FixedI32<Frac>

Returns a number representing the sign of self.

Panics

When debug assertions are enabled, this method panics

• if the value is positive and the fixed-point number has zero or one integer bits such that it cannot hold the value 1.
• if the value is negative and the fixed-point number has zero integer bits, such that it cannot hold the value −1.

When debug assertions are not enabled, the wrapped value can be returned in those cases, but it is not considered a breaking change if in the future it panics; using this method when 1 and −1 cannot be represented is almost certainly a bug.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).signum(), 1);
assert_eq!(Fix::ZERO.signum(), 0);
assert_eq!(Fix::from_num(-5).signum(), -1);

pub const fn recip(self) -> FixedI32<Frac>

Returns the reciprocal (inverse) of the fixed-point number, 1/self.

Panics

Panics if the fixed-point number is zero.

When debug assertions are enabled, this method also panics if the reciprocal overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_recip instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2).recip(), Fix::from_num(0.5));

pub const fn div_euclid(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Euclidean division.

Panics

Panics if the divisor is zero.

When debug assertions are enabled, this method also panics if the division overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_div_euclid instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).div_euclid(Fix::from_num(2)), Fix::from_num(3));
assert_eq!(Fix::from_num(-7.5).div_euclid(Fix::from_num(2)), Fix::from_num(-4));

pub const fn div_euclid_int(self, rhs: i32) -> FixedI32<Frac>

Euclidean division by an integer.

Panics

Panics if the divisor is zero.

When debug assertions are enabled, this method also panics if the division overflows. Overflow can only occur when dividing the minimum value by −1. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_div_euclid_int instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).div_euclid_int(2), Fix::from_num(3));
assert_eq!(Fix::from_num(-7.5).div_euclid_int(2), Fix::from_num(-4));

pub const fn add_prod<AFrac: LeEqU32, BFrac: LeEqU32>( self, a: FixedI32<AFrac>, b: FixedI32<BFrac> ) -> FixedI32<Frac>

Adds self to the product a × b.

For some cases, the product a × b would overflow on its own, but the final result self + a × b is representable; in these cases this method returns the correct result without overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

The mul_acc method performs the same operation as this method but mutates self instead of returning the result.

Panics

When debug assertions are enabled, this method panics if the result overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_add_prod instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).add_prod(Fix::from_num(4), Fix::from_num(0.5)), 5);
// -MAX + MAX × 1.5 = MAX / 2, which does not overflow
assert_eq!((-Fix::MAX).add_prod(Fix::MAX, Fix::from_num(1.5)), Fix::MAX / 2);

pub fn mul_acc<AFrac: LeEqU32, BFrac: LeEqU32>( &mut self, a: FixedI32<AFrac>, b: FixedI32<BFrac> )

Multiply and accumulate. Adds (a × b) to self.

For some cases, the product a × b would overflow on its own, but the final result self + a × b is representable; in these cases this method saves the correct result without overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

The add_prod method performs the same operation as this method but returns the result instead of mutating self.

Panics

When debug assertions are enabled, this method panics if the result overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_mul_acc instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let mut acc = Fix::from_num(3);
acc.mul_acc(Fix::from_num(4), Fix::from_num(0.5));
assert_eq!(acc, 5);

// MAX × 1.5 - MAX = MAX / 2, which does not overflow
acc = -Fix::MAX;
acc.mul_acc(Fix::MAX, Fix::from_num(1.5));
assert_eq!(acc, Fix::MAX / 2);

pub const fn rem_euclid_int(self, rhs: i32) -> FixedI32<Frac>

Remainder for Euclidean division by an integer.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).rem_euclid_int(2), Fix::from_num(1.5));
assert_eq!(Fix::from_num(-7.5).rem_euclid_int(2), Fix::from_num(0.5));

pub const fn sqrt(self) -> Self

Returns the square root.

This method uses an iterative method, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √self < result + DELTA.

Overflow can only occur when there are no integer bits and the representable range is −0.5 ≤ x < 0.5. In this case, overflow occurs for an input value ≥ 0.25.

Panics

Panics if the number is negative.

When debug assertions are enabled, this method also panics if the square root overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_sqrt instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2).sqrt(), Fix::SQRT_2);

pub const fn lerp<RangeFrac>( self, start: FixedI32<RangeFrac>, end: FixedI32<RangeFrac> ) -> FixedI32<RangeFrac>

Linear interpolation between start and end.

Returns start + self × (end − start). This is start when self = 0, end when self = 1, and linear interpolation for all other values of self. Linear extrapolation is performed if self is not in the range 0 ≤ x ≤ 1.

Panics

When debug assertions are enabled, this method panics if the result overflows. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_lerp instead.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let start = Fix::from_num(2);
let end = Fix::from_num(3.5);
assert_eq!(Fix::from_num(-1.0).lerp(start, end), 0.5);
assert_eq!(Fix::from_num(0.0).lerp(start, end), 2);
assert_eq!(Fix::from_num(0.5).lerp(start, end), 2.75);
assert_eq!(Fix::from_num(1.0).lerp(start, end), 3.5);
assert_eq!(Fix::from_num(2.0).lerp(start, end), 5);

pub const fn checked_signum(self) -> Option<FixedI32<Frac>>

Checked signum. Returns a number representing the sign of self, or None on overflow.

Overflow can only occur

• if the value is positive and the fixed-point number has zero or one integer bits such that it cannot hold the value 1.
• if the value is negative and the fixed-point number has zero integer bits, such that it cannot hold the value −1.

Examples

use fixed::{
    types::extra::{U4, U31, U32},
    FixedI32,
};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).checked_signum(), Some(Fix::ONE));
assert_eq!(Fix::ZERO.checked_signum(), Some(Fix::ZERO));
assert_eq!(Fix::from_num(-5).checked_signum(), Some(Fix::NEG_ONE));

type OneIntBit = FixedI32<U31>;
type ZeroIntBits = FixedI32<U32>;
assert_eq!(OneIntBit::from_num(0.5).checked_signum(), None);
assert_eq!(ZeroIntBits::from_num(0.25).checked_signum(), None);
assert_eq!(ZeroIntBits::from_num(-0.5).checked_signum(), None);

pub const fn checked_mul(self, rhs: FixedI32<Frac>) -> Option<FixedI32<Frac>>

Checked multiplication. Returns the product, or None on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::MAX.checked_mul(Fix::ONE), Some(Fix::MAX));
assert_eq!(Fix::MAX.checked_mul(Fix::from_num(2)), None);

pub const fn checked_div(self, rhs: FixedI32<Frac>) -> Option<FixedI32<Frac>>

Checked division. Returns the quotient, or None if the divisor is zero or on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::MAX.checked_div(Fix::ONE), Some(Fix::MAX));
assert_eq!(Fix::MAX.checked_div(Fix::ONE / 2), None);

pub const fn checked_recip(self) -> Option<FixedI32<Frac>>

Checked reciprocal. Returns the reciprocal, or None if self is zero or on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2).checked_recip(), Some(Fix::from_num(0.5)));
assert_eq!(Fix::ZERO.checked_recip(), None);

pub const fn checked_div_euclid( self, rhs: FixedI32<Frac> ) -> Option<FixedI32<Frac>>

Checked Euclidean division. Returns the quotient, or None if the divisor is zero or on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).checked_div_euclid(Fix::from_num(2)), Some(Fix::from_num(3)));
assert_eq!(Fix::from_num(7.5).checked_div_euclid(Fix::ZERO), None);
assert_eq!(Fix::MAX.checked_div_euclid(Fix::from_num(0.25)), None);
assert_eq!(Fix::from_num(-7.5).checked_div_euclid(Fix::from_num(2)), Some(Fix::from_num(-4)));

pub const fn checked_add_prod<AFrac: LeEqU32, BFrac: LeEqU32>( self, a: FixedI32<AFrac>, b: FixedI32<BFrac> ) -> Option<FixedI32<Frac>>

Adds self to the product a × b, returning None on overflow.

For some cases, the product a × b would overflow on its own, but the final result self + a × b is representable; in these cases this method returns the correct result without overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(3).checked_add_prod(Fix::from_num(4), Fix::from_num(0.5)),
    Some(Fix::from_num(5))
);
assert_eq!(Fix::DELTA.checked_add_prod(Fix::MAX, Fix::ONE), None);
// -MAX + MAX × 1.5 = MAX / 2, which does not overflow
assert_eq!(
    (-Fix::MAX).checked_add_prod(Fix::MAX, Fix::from_num(1.5)),
    Some(Fix::MAX / 2)
);

pub fn checked_mul_acc<AFrac: LeEqU32, BFrac: LeEqU32>( &mut self, a: FixedI32<AFrac>, b: FixedI32<BFrac> ) -> Option<()>

Checked multiply and accumulate. Adds (a × b) to self, or returns None on overflow.

Like all other checked methods, this method wraps the successful return value in an Option. Since the unchecked mul_acc method does not return a value, which is equivalent to returning (), this method wraps () into Some(()) on success.

When overflow occurs, self is not modified and retains its previous value.

For some cases, the product a × b would overflow on its own, but the final result self + a × b is representable; in these cases this method saves the correct result without overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let mut acc = Fix::from_num(3);
let check = acc.checked_mul_acc(Fix::from_num(4), Fix::from_num(0.5));
assert_eq!(check, Some(()));
assert_eq!(acc, 5);

acc = Fix::DELTA;
let check = acc.checked_mul_acc(Fix::MAX, Fix::ONE);
assert_eq!(check, None);
// acc is unchanged on error
assert_eq!(acc, Fix::DELTA);

// MAX × 1.5 - MAX = MAX / 2, which does not overflow
acc = -Fix::MAX;
let check = acc.checked_mul_acc(Fix::MAX, Fix::from_num(1.5));
assert_eq!(check, Some(()));
assert_eq!(acc, Fix::MAX / 2);

pub const fn checked_rem_int(self, rhs: i32) -> Option<FixedI32<Frac>>

Checked fixed-point remainder for division by an integer. Returns the remainder, or None if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3.75).checked_rem_int(2), Some(Fix::from_num(1.75)));
assert_eq!(Fix::from_num(3.75).checked_rem_int(0), None);
assert_eq!(Fix::from_num(-3.75).checked_rem_int(2), Some(Fix::from_num(-1.75)));

pub const fn checked_div_euclid_int(self, rhs: i32) -> Option<FixedI32<Frac>>

Checked Euclidean division by an integer. Returns the quotient, or None if the divisor is zero or if the division results in overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).checked_div_euclid_int(2), Some(Fix::from_num(3)));
assert_eq!(Fix::from_num(7.5).checked_div_euclid_int(0), None);
assert_eq!(Fix::MIN.checked_div_euclid_int(-1), None);

pub const fn checked_rem_euclid_int(self, rhs: i32) -> Option<FixedI32<Frac>>

Checked remainder for Euclidean division by an integer. Returns the remainder, or None if the divisor is zero or if the remainder results in overflow.

Examples

use fixed::{types::extra::U28, FixedI32};
type Fix = FixedI32<U28>;
assert_eq!(Fix::from_num(7.5).checked_rem_euclid_int(2), Some(Fix::from_num(1.5)));
assert_eq!(Fix::from_num(7.5).checked_rem_euclid_int(0), None);
assert_eq!(Fix::from_num(-7.5).checked_rem_euclid_int(2), Some(Fix::from_num(0.5)));
// -8 ≤ Fix < 8, so the answer 12.5 overflows
assert_eq!(Fix::from_num(-7.5).checked_rem_euclid_int(20), None);

pub const fn checked_sqrt(self) -> Option<Self>

Checked square root. Returns None for negative numbers and on overflow.

This method uses an iterative method, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √self < result + DELTA.

Overflow can only occur when there are no integer bits and the representable range is −0.5 ≤ x < 0.5. In this case, the method returns None for an input value ≥ 0.25.

Examples

use fixed::types::extra::{U4, U32};
use fixed::FixedI32;
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2).checked_sqrt(), Some(Fix::SQRT_2));
assert_eq!(Fix::from_num(-1).checked_sqrt(), None);

type AllFrac = FixedI32<U32>;
assert_eq!(AllFrac::from_num(0.25).checked_sqrt(), None);

pub const fn checked_lerp<RangeFrac>( self, start: FixedI32<RangeFrac>, end: FixedI32<RangeFrac> ) -> Option<FixedI32<RangeFrac>>

Checked linear interpolation between start and end. Returns None on overflow.

The interpolted value is start + self × (end − start). This is start when self = 0, end when self = 1, and linear interpolation for all other values of self. Linear extrapolation is performed if self is not in the range 0 ≤ x ≤ 1.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(0.5).checked_lerp(Fix::ZERO, Fix::MAX), Some(Fix::MAX / 2));
assert_eq!(Fix::from_num(1.5).checked_lerp(Fix::ZERO, Fix::MAX), None);

pub const fn saturating_signum(self) -> FixedI32<Frac>

Saturating signum. Returns a number representing the sign of self, saturating on overflow.

Overflow can only occur

• if the value is positive and the fixed-point number has zero or one integer bits such that it cannot hold the value 1.
• if the value is negative and the fixed-point number has zero integer bits, such that it cannot hold the value −1.

Examples

use fixed::{
    types::extra::{U4, U31, U32},
    FixedI32,
};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).saturating_signum(), 1);
assert_eq!(Fix::ZERO.saturating_signum(), 0);
assert_eq!(Fix::from_num(-5).saturating_signum(), -1);

type OneIntBit = FixedI32<U31>;
type ZeroIntBits = FixedI32<U32>;
assert_eq!(OneIntBit::from_num(0.5).saturating_signum(), OneIntBit::MAX);
assert_eq!(ZeroIntBits::from_num(0.25).saturating_signum(), ZeroIntBits::MAX);
assert_eq!(ZeroIntBits::from_num(-0.5).saturating_signum(), ZeroIntBits::MIN);

pub const fn saturating_mul(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Saturating multiplication. Returns the product, saturating on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).saturating_mul(Fix::from_num(2)), Fix::from_num(6));
assert_eq!(Fix::MAX.saturating_mul(Fix::from_num(2)), Fix::MAX);

pub const fn saturating_div(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Saturating division. Returns the quotient, saturating on overflow.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let one_half = Fix::ONE / 2;
assert_eq!(Fix::ONE.saturating_div(Fix::from_num(2)), one_half);
assert_eq!(Fix::MAX.saturating_div(one_half), Fix::MAX);

pub const fn saturating_recip(self) -> FixedI32<Frac>

Saturating reciprocal. Returns the reciprocal, saturating on overflow.

Panics

Panics if the fixed-point number is zero.

Examples

use fixed::{types::extra::U31, FixedI32};
// only one integer bit
type Fix = FixedI32<U31>;
assert_eq!(Fix::from_num(0.25).saturating_recip(), Fix::MAX);
assert_eq!(Fix::from_num(-0.25).saturating_recip(), Fix::MIN);

pub const fn saturating_div_euclid(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Saturating Euclidean division. Returns the quotient, saturating on overflow.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).saturating_div_euclid(Fix::from_num(2)), Fix::from_num(3));
assert_eq!(Fix::MAX.saturating_div_euclid(Fix::from_num(0.25)), Fix::MAX);
assert_eq!(Fix::from_num(-7.5).saturating_div_euclid(Fix::from_num(2)), Fix::from_num(-4));
assert_eq!(Fix::MIN.saturating_div_euclid(Fix::from_num(0.25)), Fix::MIN);

pub const fn saturating_div_euclid_int(self, rhs: i32) -> FixedI32<Frac>

Saturating Euclidean division by an integer. Returns the quotient, saturating on overflow.

Overflow can only occur when dividing the minimum value by −1.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).saturating_div_euclid_int(2), Fix::from_num(3));
assert_eq!(Fix::from_num(-7.5).saturating_div_euclid_int(2), Fix::from_num(-4));
assert_eq!(Fix::MIN.saturating_div_euclid_int(-1), Fix::MAX);

pub const fn saturating_add_prod<AFrac: LeEqU32, BFrac: LeEqU32>( self, a: FixedI32<AFrac>, b: FixedI32<BFrac> ) -> FixedI32<Frac>

Adds self to the product a × b, saturating on overflow.

For some cases, the product a × b would overflow on its own, but the final result self + a × b is representable; in these cases this method returns the correct result without overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(3).saturating_add_prod(Fix::from_num(4), Fix::from_num(0.5)),
    5
);
assert_eq!(Fix::ONE.saturating_add_prod(Fix::MAX, Fix::from_num(3)), Fix::MAX);
// -MAX + MAX × 1.5 = MAX / 2, which does not overflow
assert_eq!(
    (-Fix::MAX).saturating_add_prod(Fix::MAX, Fix::from_num(1.5)),
    Fix::MAX / 2
);

pub fn saturating_mul_acc<AFrac: LeEqU32, BFrac: LeEqU32>( &mut self, a: FixedI32<AFrac>, b: FixedI32<BFrac> )

Saturating multiply and accumulate. Adds (a × b) to self, saturating on overflow.

For some cases, the product a × b would overflow on its own, but the final result self + a × b is representable; in these cases this method saves the correct result without overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let mut acc = Fix::from_num(3);
acc.saturating_mul_acc(Fix::from_num(4), Fix::from_num(0.5));
assert_eq!(acc, 5);

acc = Fix::MAX / 2;
acc.saturating_mul_acc(Fix::MAX / 2, Fix::from_num(3));
assert_eq!(acc, Fix::MAX);

// MAX × 1.5 - MAX = MAX / 2, which does not overflow
acc = -Fix::MAX;
acc.saturating_mul_acc(Fix::MAX, Fix::from_num(1.5));
assert_eq!(acc, Fix::MAX / 2);

pub const fn saturating_rem_euclid_int(self, rhs: i32) -> FixedI32<Frac>

Saturating remainder for Euclidean division by an integer. Returns the remainder, saturating on overflow.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U28, FixedI32};
type Fix = FixedI32<U28>;
assert_eq!(Fix::from_num(7.5).saturating_rem_euclid_int(2), Fix::from_num(1.5));
assert_eq!(Fix::from_num(-7.5).saturating_rem_euclid_int(2), Fix::from_num(0.5));
// -8 ≤ Fix < 8, so the answer 12.5 saturates
assert_eq!(Fix::from_num(-7.5).saturating_rem_euclid_int(20), Fix::MAX);

pub const fn saturating_sqrt(self) -> Self

Returns the square root, saturating on overflow.

This method uses an iterative method, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √self < result + DELTA.

Overflow can only occur when there are no integer bits and the representable range is −0.5 ≤ x < 0.5. In this case, the method returns MAX for an input value ≥ 0.25.

Panics

Panics if the number is negative.

Examples

use fixed::types::extra::{U4, U32};
use fixed::FixedI32;
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2).saturating_sqrt(), Fix::SQRT_2);

type AllFrac = FixedI32<U32>;
assert_eq!(AllFrac::from_num(0.25).saturating_sqrt(), AllFrac::MAX);

pub const fn saturating_lerp<RangeFrac>( self, start: FixedI32<RangeFrac>, end: FixedI32<RangeFrac> ) -> FixedI32<RangeFrac>

Linear interpolation between start and end, saturating on overflow.

The interpolated value is start + self × (end − start). This is start when self = 0, end when self = 1, and linear interpolation for all other values of self. Linear extrapolation is performed if self is not in the range 0 ≤ x ≤ 1.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(0.5).saturating_lerp(Fix::ZERO, Fix::MAX), Fix::MAX / 2);
assert_eq!(Fix::from_num(1.5).saturating_lerp(Fix::ZERO, Fix::MAX), Fix::MAX);
assert_eq!(Fix::from_num(-2.0).saturating_lerp(Fix::ZERO, Fix::MAX), Fix::MIN);
assert_eq!(Fix::from_num(3.0).saturating_lerp(Fix::MAX, Fix::ZERO), Fix::MIN);

pub const fn wrapping_signum(self) -> FixedI32<Frac>

Wrapping signum. Returns a number representing the sign of self, wrapping on overflow.

Overflow can only occur

• if the value is positive and the fixed-point number has zero or one integer bits such that it cannot hold the value 1.
• if the value is negative and the fixed-point number has zero integer bits, such that it cannot hold the value −1.

Examples

use fixed::{
    types::extra::{U4, U31, U32},
    FixedI32,
};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).wrapping_signum(), 1);
assert_eq!(Fix::ZERO.wrapping_signum(), 0);
assert_eq!(Fix::from_num(-5).wrapping_signum(), -1);

type OneIntBit = FixedI32<U31>;
type ZeroIntBits = FixedI32<U32>;
assert_eq!(OneIntBit::from_num(0.5).wrapping_signum(), -1);
assert_eq!(ZeroIntBits::from_num(0.25).wrapping_signum(), 0);
assert_eq!(ZeroIntBits::from_num(-0.5).wrapping_signum(), 0);

pub const fn wrapping_mul(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Wrapping multiplication. Returns the product, wrapping on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).wrapping_mul(Fix::from_num(2)), Fix::from_num(6));
let wrapped = Fix::from_bits(!0 << 2);
assert_eq!(Fix::MAX.wrapping_mul(Fix::from_num(4)), wrapped);

pub const fn wrapping_div(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Wrapping division. Returns the quotient, wrapping on overflow.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let one_point_5 = Fix::from_bits(0b11 << (4 - 1));
assert_eq!(Fix::from_num(3).wrapping_div(Fix::from_num(2)), one_point_5);
let quarter = Fix::ONE / 4;
let wrapped = Fix::from_bits(!0 << 2);
assert_eq!(Fix::MAX.wrapping_div(quarter), wrapped);

pub const fn wrapping_recip(self) -> FixedI32<Frac>

Wrapping reciprocal. Returns the reciprocal, wrapping on overflow.

Panics

Panics if the fixed-point number is zero.

Examples

use fixed::{types::extra::U31, FixedI32};
// only one integer bit
type Fix = FixedI32<U31>;
assert_eq!(Fix::from_num(0.25).wrapping_recip(), Fix::ZERO);

pub const fn wrapping_div_euclid(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Wrapping Euclidean division. Returns the quotient, wrapping on overflow.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).wrapping_div_euclid(Fix::from_num(2)), Fix::from_num(3));
let wrapped = Fix::MAX.wrapping_mul_int(4).round_to_zero();
assert_eq!(Fix::MAX.wrapping_div_euclid(Fix::from_num(0.25)), wrapped);

pub const fn wrapping_div_euclid_int(self, rhs: i32) -> FixedI32<Frac>

Wrapping Euclidean division by an integer. Returns the quotient, wrapping on overflow.

Overflow can only occur when dividing the minimum value by −1.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).wrapping_div_euclid_int(2), Fix::from_num(3));
assert_eq!(Fix::from_num(-7.5).wrapping_div_euclid_int(2), Fix::from_num(-4));
let wrapped = Fix::MIN.round_to_zero();
assert_eq!(Fix::MIN.wrapping_div_euclid_int(-1), wrapped);

pub const fn wrapping_add_prod<AFrac: LeEqU32, BFrac: LeEqU32>( self, a: FixedI32<AFrac>, b: FixedI32<BFrac> ) -> FixedI32<Frac>

Adds self to the product a × b, wrapping on overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(3).wrapping_add_prod(Fix::from_num(4), Fix::from_num(0.5)),
    5
);
assert_eq!(
    Fix::MAX.wrapping_add_prod(Fix::MAX, Fix::from_num(3)),
    Fix::MAX.wrapping_mul_int(4)
);

pub fn wrapping_mul_acc<AFrac: LeEqU32, BFrac: LeEqU32>( &mut self, a: FixedI32<AFrac>, b: FixedI32<BFrac> )

Wrapping multiply and accumulate. Adds (a × b) to self, wrapping on overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let mut acc = Fix::from_num(3);
acc.wrapping_mul_acc(Fix::from_num(4), Fix::from_num(0.5));
assert_eq!(acc, 5);

acc = Fix::MAX;
acc.wrapping_mul_acc(Fix::MAX, Fix::from_num(3));
assert_eq!(acc, Fix::MAX.wrapping_mul_int(4));

pub const fn wrapping_rem_euclid_int(self, rhs: i32) -> FixedI32<Frac>

Wrapping remainder for Euclidean division by an integer. Returns the remainder, wrapping on overflow.

Note that while remainder for Euclidean division cannot be negative, the wrapped value can be negative.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U28, FixedI32};
type Fix = FixedI32<U28>;
assert_eq!(Fix::from_num(7.5).wrapping_rem_euclid_int(2), Fix::from_num(1.5));
assert_eq!(Fix::from_num(-7.5).wrapping_rem_euclid_int(2), Fix::from_num(0.5));
// -8 ≤ Fix < 8, so the answer 12.5 wraps to -3.5
assert_eq!(Fix::from_num(-7.5).wrapping_rem_euclid_int(20), Fix::from_num(-3.5));

pub const fn wrapping_sqrt(self) -> Self

Returns the square root, wrapping on overflow.

This method uses an iterative method, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √self < result + DELTA.

Overflow can only occur when there are no integer bits and the representable range is −0.5 ≤ x < 0.5. In this case, the method returns the wrapped answer for an input value ≥ 0.25.

Panics

Panics if the number is negative.

Examples

use fixed::types::extra::{U4, U32};
use fixed::FixedI32;
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2).wrapping_sqrt(), Fix::SQRT_2);

type AllFrac = FixedI32<U32>;
assert_eq!(AllFrac::from_num(0.25).wrapping_sqrt(), AllFrac::from_num(-0.5));

pub const fn wrapping_lerp<RangeFrac>( self, start: FixedI32<RangeFrac>, end: FixedI32<RangeFrac> ) -> FixedI32<RangeFrac>

Linear interpolation between start and end, wrapping on overflow.

The interpolated value is start + self × (end − start). This is start when self = 0, end when self = 1, and linear interpolation for all other values of self. Linear extrapolation is performed if self is not in the range 0 ≤ x ≤ 1.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(0.5).wrapping_lerp(Fix::ZERO, Fix::MAX), Fix::MAX / 2);
assert_eq!(
    Fix::from_num(1.5).wrapping_lerp(Fix::ZERO, Fix::MAX),
    Fix::MAX.wrapping_add(Fix::MAX / 2)
);

pub const fn unwrapped_signum(self) -> FixedI32<Frac>

Unwrapped signum. Returns a number representing the sign of self, panicking on overflow.

Overflow can only occur

• if the value is positive and the fixed-point number has zero or one integer bits such that it cannot hold the value 1.
• if the value is negative and the fixed-point number has zero integer bits, such that it cannot hold the value −1.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).unwrapped_signum(), 1);
assert_eq!(Fix::ZERO.unwrapped_signum(), 0);
assert_eq!(Fix::from_num(-5).unwrapped_signum(), -1);

The following panics because of overflow.

use fixed::{types::extra::U31, FixedI32};
type OneIntBit = FixedI32<U31>;
let _overflow = OneIntBit::from_num(0.5).unwrapped_signum();

pub const fn unwrapped_mul(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Unwrapped multiplication. Returns the product, panicking on overflow.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).unwrapped_mul(Fix::from_num(2)), Fix::from_num(6));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MAX.unwrapped_mul(Fix::from_num(4));

pub const fn unwrapped_div(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Unwrapped division. Returns the quotient, panicking on overflow.

Panics

Panics if the divisor is zero or if the division results in overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let one_point_5 = Fix::from_bits(0b11 << (4 - 1));
assert_eq!(Fix::from_num(3).unwrapped_div(Fix::from_num(2)), one_point_5);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let quarter = Fix::ONE / 4;
let _overflow = Fix::MAX.unwrapped_div(quarter);

pub const fn unwrapped_recip(self) -> FixedI32<Frac>

Unwrapped reciprocal. Returns the reciprocal, panicking on overflow.

Panics

Panics if the fixed-point number is zero or on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(0.25).unwrapped_recip(), Fix::from_num(4));

pub const fn unwrapped_div_euclid(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Unwrapped Euclidean division. Returns the quotient, panicking on overflow.

Panics

Panics if the divisor is zero or if the division results in overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).unwrapped_div_euclid(Fix::from_num(2)), Fix::from_num(3));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MAX.unwrapped_div_euclid(Fix::from_num(0.25));

pub const fn unwrapped_add_prod<AFrac: LeEqU32, BFrac: LeEqU32>( self, a: FixedI32<AFrac>, b: FixedI32<BFrac> ) -> FixedI32<Frac>

Adds self to the product a × b, panicking on overflow.

For some cases, the product a × b would overflow on its own, but the final result self + a × b is representable; in these cases this method returns the correct result without overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(3).unwrapped_add_prod(Fix::from_num(4), Fix::from_num(0.5)),
    5
);
// -MAX + MAX × 1.5 = MAX / 2, which does not overflow
assert_eq!(
    (-Fix::MAX).unwrapped_add_prod(Fix::MAX, Fix::from_num(1.5)),
    Fix::MAX / 2
);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::DELTA.unwrapped_add_prod(Fix::MAX, Fix::ONE);

pub fn unwrapped_mul_acc<AFrac: LeEqU32, BFrac: LeEqU32>( &mut self, a: FixedI32<AFrac>, b: FixedI32<BFrac> )

Unwrapped multiply and accumulate. Adds (a × b) to self, panicking on overflow.

For some cases, the product a × b would overflow on its own, but the final result self + a × b is representable; in these cases this method saves the correct result without overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

Panics

Panics if the result does not fit.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let mut acc = Fix::from_num(3);
acc.unwrapped_mul_acc(Fix::from_num(4), Fix::from_num(0.5));
assert_eq!(acc, 5);

// MAX × 1.5 - MAX = MAX / 2, which does not overflow
acc = -Fix::MAX;
acc.unwrapped_mul_acc(Fix::MAX, Fix::from_num(1.5));
assert_eq!(acc, Fix::MAX / 2);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let mut acc = Fix::DELTA;
acc.unwrapped_mul_acc(Fix::MAX, Fix::ONE);

pub const fn unwrapped_rem_int(self, rhs: i32) -> FixedI32<Frac>

Unwrapped fixed-point remainder for division by an integer. Returns the remainder, panicking if the divisor is zero.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3.75).unwrapped_rem_int(2), Fix::from_num(1.75));

The following panics because the divisor is zero.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _divisor_is_zero = Fix::from_num(3.75).unwrapped_rem_int(0);

pub const fn unwrapped_div_euclid_int(self, rhs: i32) -> FixedI32<Frac>

Unwrapped Euclidean division by an integer. Returns the quotient, panicking on overflow.

Overflow can only occur when dividing the minimum value by −1.

Panics

Panics if the divisor is zero or if the division results in overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).unwrapped_div_euclid_int(2), Fix::from_num(3));
assert_eq!(Fix::from_num(-7.5).unwrapped_div_euclid_int(2), Fix::from_num(-4));

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::MIN.unwrapped_div_euclid_int(-1);

pub const fn unwrapped_rem_euclid_int(self, rhs: i32) -> FixedI32<Frac>

Unwrapped remainder for Euclidean division by an integer. Returns the remainder, panicking on overflow.

Note that while remainder for Euclidean division cannot be negative, the wrapped value can be negative.

Panics

Panics if the divisor is zero or if the division results in overflow.

Examples

use fixed::{types::extra::U28, FixedI32};
type Fix = FixedI32<U28>;
assert_eq!(Fix::from_num(7.5).unwrapped_rem_euclid_int(2), Fix::from_num(1.5));
assert_eq!(Fix::from_num(-7.5).unwrapped_rem_euclid_int(2), Fix::from_num(0.5));

The following panics because of overflow.

use fixed::{types::extra::U28, FixedI32};
type Fix = FixedI32<U28>;
// -8 ≤ Fix < 8, so the answer 12.5 overflows
let _overflow = Fix::from_num(-7.5).unwrapped_rem_euclid_int(20);

pub const fn unwrapped_sqrt(self) -> Self

Returns the square root, panicking for negative numbers and on overflow.

This method uses an iterative method, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √self < result + DELTA.

Overflow can only occur when there are no integer bits and the representable range is −0.5 ≤ x < 0.5. In this case, the method panics for an input value ≥ 0.25.

Panics

Panics if the number is negative and on overflow.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(2).unwrapped_sqrt(), Fix::SQRT_2);

The following panics because the input value is negative.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _sqrt_neg = Fix::from_num(-1).unwrapped_sqrt();

The following panics because of overflow.

use fixed::{types::extra::U32, FixedI32};
type AllFrac = FixedI32<U32>;
let _overflow = AllFrac::from_num(0.25).unwrapped_sqrt();

pub const fn unwrapped_lerp<RangeFrac>( self, start: FixedI32<RangeFrac>, end: FixedI32<RangeFrac> ) -> FixedI32<RangeFrac>

Linear interpolation between start and end, panicking on overflow.

The interpolated value is start + self × (end − start). This is start when self = 0, end when self = 1, and linear interpolation for all other values of self. Linear extrapolation is performed if self is not in the range 0 ≤ x ≤ 1.

Panics

Panics if the result overflows.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(0.5).unwrapped_lerp(Fix::ZERO, Fix::MAX), Fix::MAX / 2);

The following panics because of overflow.

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let _overflow = Fix::from_num(1.5).unwrapped_lerp(Fix::ZERO, Fix::MAX);

pub const fn overflowing_signum(self) -> (FixedI32<Frac>, bool)

Overflowing signum.

Returns a tuple of the signum and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Overflow can only occur

• if the value is positive and the fixed-point number has zero or one integer bits such that it cannot hold the value 1.
• if the value is negative and the fixed-point number has zero integer bits, such that it cannot hold the value −1.

Examples

use fixed::{
    types::extra::{U4, U31, U32},
    FixedI32,
};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(5).overflowing_signum(), (Fix::ONE, false));
assert_eq!(Fix::ZERO.overflowing_signum(), (Fix::ZERO, false));
assert_eq!(Fix::from_num(-5).overflowing_signum(), (Fix::NEG_ONE, false));

type OneIntBit = FixedI32<U31>;
type ZeroIntBits = FixedI32<U32>;
assert_eq!(OneIntBit::from_num(0.5).overflowing_signum(), (OneIntBit::NEG_ONE, true));
assert_eq!(ZeroIntBits::from_num(0.25).overflowing_signum(), (ZeroIntBits::ZERO, true));
assert_eq!(ZeroIntBits::from_num(-0.5).overflowing_signum(), (ZeroIntBits::ZERO, true));

pub const fn overflowing_mul( self, rhs: FixedI32<Frac> ) -> (FixedI32<Frac>, bool)

Overflowing multiplication.

Returns a tuple of the product and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(3).overflowing_mul(Fix::from_num(2)), (Fix::from_num(6), false));
let wrapped = Fix::from_bits(!0 << 2);
assert_eq!(Fix::MAX.overflowing_mul(Fix::from_num(4)), (wrapped, true));

pub const fn overflowing_div( self, rhs: FixedI32<Frac> ) -> (FixedI32<Frac>, bool)

Overflowing division.

Returns a tuple of the quotient and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let one_point_5 = Fix::from_bits(0b11 << (4 - 1));
assert_eq!(Fix::from_num(3).overflowing_div(Fix::from_num(2)), (one_point_5, false));
let quarter = Fix::ONE / 4;
let wrapped = Fix::from_bits(!0 << 2);
assert_eq!(Fix::MAX.overflowing_div(quarter), (wrapped, true));

pub const fn overflowing_recip(self) -> (FixedI32<Frac>, bool)

Overflowing reciprocal.

Returns a tuple of the reciprocal and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Panics

Panics if the fixed-point number is zero.

Examples

use fixed::{
    types::extra::{U4, U31},
    FixedI32,
};
type Fix = FixedI32<U4>;
// only one integer bit
type Small = FixedI32<U31>;
assert_eq!(Fix::from_num(0.25).overflowing_recip(), (Fix::from_num(4), false));
assert_eq!(Small::from_num(0.25).overflowing_recip(), (Small::ZERO, true));

pub const fn overflowing_div_euclid( self, rhs: FixedI32<Frac> ) -> (FixedI32<Frac>, bool)

Overflowing Euclidean division.

Returns a tuple of the quotient and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let check = Fix::from_num(3);
assert_eq!(Fix::from_num(7.5).overflowing_div_euclid(Fix::from_num(2)), (check, false));
let wrapped = Fix::MAX.wrapping_mul_int(4).round_to_zero();
assert_eq!(Fix::MAX.overflowing_div_euclid(Fix::from_num(0.25)), (wrapped, true));

pub const fn overflowing_div_euclid_int( self, rhs: i32 ) -> (FixedI32<Frac>, bool)

Overflowing Euclidean division by an integer.

Returns a tuple of the quotient and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned. Overflow can only occur when dividing the minimum value by −1.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::from_num(7.5).overflowing_div_euclid_int(2), (Fix::from_num(3), false));
assert_eq!(Fix::from_num(-7.5).overflowing_div_euclid_int(2), (Fix::from_num(-4), false));
let wrapped = Fix::MIN.round_to_zero();
assert_eq!(Fix::MIN.overflowing_div_euclid_int(-1), (wrapped, true));

pub const fn overflowing_add_prod<AFrac: LeEqU32, BFrac: LeEqU32>( self, a: FixedI32<AFrac>, b: FixedI32<BFrac> ) -> (FixedI32<Frac>, bool)

Adds self to the product a × b.

Returns a tuple of the result and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

For some cases, the product a × b would overflow on its own, but the final result self + a × b is representable; in these cases this method returns the correct result without overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(3).overflowing_add_prod(Fix::from_num(4), Fix::from_num(0.5)),
    (Fix::from_num(5), false)
);
assert_eq!(
    Fix::MAX.overflowing_add_prod(Fix::MAX, Fix::from_num(3)),
    (Fix::MAX.wrapping_mul_int(4), true)
);
// -MAX + MAX × 1.5 = MAX / 2, which does not overflow
assert_eq!(
    (-Fix::MAX).overflowing_add_prod(Fix::MAX, Fix::from_num(1.5)),
    (Fix::MAX / 2, false)
);

pub fn overflowing_mul_acc<AFrac: LeEqU32, BFrac: LeEqU32>( &mut self, a: FixedI32<AFrac>, b: FixedI32<BFrac> ) -> bool

Overflowing multiply and accumulate. Adds (a × b) to self, wrapping and returning true if overflow occurs.

For some cases, the product a × b would overflow on its own, but the final result self + a × b is representable; in these cases this method saves the correct result without overflow.

The a and b parameters can have a fixed-point type like self but with a different number of fractional bits.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
let mut acc = Fix::from_num(3);
assert!(!acc.overflowing_mul_acc(Fix::from_num(4), Fix::from_num(0.5)));
assert_eq!(acc, 5);

acc = Fix::MAX;
assert!(acc.overflowing_mul_acc(Fix::MAX, Fix::from_num(3)));
assert_eq!(acc, Fix::MAX.wrapping_mul_int(4));

// MAX × 1.5 - MAX = MAX / 2, which does not overflow
acc = -Fix::MAX;
assert!(!acc.overflowing_mul_acc(Fix::MAX, Fix::from_num(1.5)));
assert_eq!(acc, Fix::MAX / 2);

pub const fn overflowing_rem_euclid_int( self, rhs: i32 ) -> (FixedI32<Frac>, bool)

Remainder for Euclidean division by an integer.

Returns a tuple of the remainder and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Note that while remainder for Euclidean division cannot be negative, the wrapped value can be negative.

Panics

Panics if the divisor is zero.

Examples

use fixed::{types::extra::U28, FixedI32};
type Fix = FixedI32<U28>;
assert_eq!(Fix::from_num(7.5).overflowing_rem_euclid_int(2), (Fix::from_num(1.5), false));
assert_eq!(Fix::from_num(-7.5).overflowing_rem_euclid_int(2), (Fix::from_num(0.5), false));
// -8 ≤ Fix < 8, so the answer 12.5 wraps to -3.5
assert_eq!(Fix::from_num(-7.5).overflowing_rem_euclid_int(20), (Fix::from_num(-3.5), true));

pub const fn overflowing_sqrt(self) -> (Self, bool)

Returns the square root.

Returns a tuple of the result and a bool indicationg whether an overflow has occurred. On overflow, the wrapped value is returned.

This method uses an iterative method, with up to 32 iterations for FixedI32. The result is rounded down, and the error is < DELTA. That is, result ≤ √self < result + DELTA.

Overflow can only occur when there are no integer bits and the representable range is −0.5 ≤ x < 0.5. In this case, overflow occurs for an input value ≥ 0.25.

Panics

Panics if the number is negative.

Examples

use fixed::types::extra::{U4, U32};
use fixed::FixedI32;
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(2).overflowing_sqrt(),
    (Fix::SQRT_2, false)
);

type AllFrac = FixedI32<U32>;
assert_eq!(
    AllFrac::from_num(0.25).overflowing_sqrt(),
    (AllFrac::from_num(-0.5), true)
);

pub const fn overflowing_lerp<RangeFrac>( self, start: FixedI32<RangeFrac>, end: FixedI32<RangeFrac> ) -> (FixedI32<RangeFrac>, bool)

Overflowing linear interpolation between start and end.

Returns a tuple of the result and a bool indicationg whether an overflow has occurred. On overflow, the wrapped value is returned.

The interpolated value is start + self × (end − start). This is start when self = 0, end when self = 1, and linear interpolation for all other values of self. Linear extrapolation is performed if self is not in the range 0 ≤ x ≤ 1.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(
    Fix::from_num(0.5).overflowing_lerp(Fix::ZERO, Fix::MAX),
    (Fix::MAX / 2, false)
);
assert_eq!(
    Fix::from_num(1.5).overflowing_lerp(Fix::ZERO, Fix::MAX),
    (Fix::MAX.wrapping_add(Fix::MAX / 2), true)
);

impl<Frac: LeEqU32> FixedI32<Frac>

This block contains constants in the range 0 < x < 0.5.

Examples

use fixed::{consts, types::extra::U32, FixedI32};
type Fix = FixedI32<U32>;
assert_eq!(Fix::LOG10_2, Fix::from_num(consts::LOG10_2));

pub const FRAC_1_TAU: FixedI32<Frac> = _

1/τ = 0.159154…

pub const FRAC_2_TAU: FixedI32<Frac> = _

2/τ = 0.318309…

pub const FRAC_PI_8: FixedI32<Frac> = _

π/8 = 0.392699…

pub const FRAC_1_PI: FixedI32<Frac> = _

1/π = 0.318309…

pub const LOG10_2: FixedI32<Frac> = _

log₁₀ 2 = 0.301029…

pub const LOG10_E: FixedI32<Frac> = _

log₁₀ e = 0.434294…

impl<Frac> FixedI32<Frac>

where Frac: IsLessOrEqual<U31, Output = True> + Unsigned,

This block contains constants in the range 0.5 ≤ x < 1, and −1.

These constants are not representable in signed fixed-point numbers with less than 1 integer bit.

Examples

use fixed::{consts, types::extra::U31, FixedI32};
type Fix = FixedI32<U31>;
assert_eq!(Fix::LN_2, Fix::from_num(consts::LN_2));
assert!(0.5 <= Fix::LN_2 && Fix::LN_2 < 1);

The following example fails to compile, since the maximum representable value with 32 fractional bits and 0 integer bits is < 0.5.

use fixed::{consts, types::extra::U32, FixedI32};
type Fix = FixedI32<U32>;
let _ = Fix::LN_2;

pub const NEG_ONE: FixedI32<Frac> = _

Negative one.

Examples

use fixed::{types::extra::U31, FixedI32};
type Fix = FixedI32<U31>;
assert_eq!(Fix::NEG_ONE, Fix::from_num(-1));

The following would fail as FixedI32<U31> cannot represent 1, so there is no FixedI32::<U31>::ONE.

use fixed::{types::extra::U31, FixedI32};
const _ERROR: FixedI32<U31> = FixedI32::ONE.unwrapped_neg();

pub const FRAC_TAU_8: FixedI32<Frac> = _

τ/8 = 0.785398…

pub const FRAC_TAU_12: FixedI32<Frac> = _

τ/12 = 0.523598…

pub const FRAC_4_TAU: FixedI32<Frac> = _

4/τ = 0.636619…

pub const FRAC_PI_4: FixedI32<Frac> = _

π/4 = 0.785398…

pub const FRAC_PI_6: FixedI32<Frac> = _

π/6 = 0.523598…

pub const FRAC_2_PI: FixedI32<Frac> = _

2/π = 0.636619…

pub const FRAC_1_SQRT_PI: FixedI32<Frac> = _

1/√π = 0.564189…

pub const FRAC_1_SQRT_2: FixedI32<Frac> = _

1/√2 = 0.707106…

pub const FRAC_1_SQRT_3: FixedI32<Frac> = _

1/√3 = 0.577350…

pub const LN_2: FixedI32<Frac> = _

ln 2 = 0.693147…

pub const FRAC_1_PHI: FixedI32<Frac> = _

The golden ratio conjugate, Φ = 1/φ = 0.618033…

pub const GAMMA: FixedI32<Frac> = _

The Euler-Mascheroni constant, γ = 0.577215…

pub const CATALAN: FixedI32<Frac> = _

Catalan’s constant = 0.915965…

impl<Frac> FixedI32<Frac>

where Frac: IsLessOrEqual<U30, Output = True> + Unsigned,

This block contains constants in the range 1 ≤ x < 2.

These constants are not representable in signed fixed-point numbers with less than 2 integer bits.

Examples

use fixed::{consts, types::extra::U30, FixedI32};
type Fix = FixedI32<U30>;
assert_eq!(Fix::LOG2_E, Fix::from_num(consts::LOG2_E));
assert!(1 <= Fix::LOG2_E && Fix::LOG2_E < 2);

The following example fails to compile, since the maximum representable value with 31 fractional bits and 1 integer bit is < 1.

use fixed::{consts, types::extra::U31, FixedI32};
type Fix = FixedI32<U31>;
let _ = Fix::LOG2_E;

pub const ONE: FixedI32<Frac> = _

One.

Examples

use fixed::{types::extra::U4, FixedI32};
type Fix = FixedI32<U4>;
assert_eq!(Fix::ONE, Fix::from_num(1));

pub const FRAC_TAU_4: FixedI32<Frac> = _

τ/4 = 1.57079…

pub const FRAC_TAU_6: FixedI32<Frac> = _

τ/6 = 1.04719…

pub const FRAC_PI_2: FixedI32<Frac> = _

π/2 = 1.57079…

pub const FRAC_PI_3: FixedI32<Frac> = _

π/3 = 1.04719…

pub const SQRT_PI: FixedI32<Frac> = _

√π = 1.77245…

pub const FRAC_2_SQRT_PI: FixedI32<Frac> = _

2/√π = 1.12837…

pub const SQRT_2: FixedI32<Frac> = _

√2 = 1.41421…

pub const SQRT_3: FixedI32<Frac> = _

√3 = 1.73205…

pub const SQRT_E: FixedI32<Frac> = _

√e = 1.64872…

pub const LOG2_E: FixedI32<Frac> = _

log₂ e = 1.44269…

pub const PHI: FixedI32<Frac> = _

The golden ratio, φ = 1.61803…

pub const SQRT_PHI: FixedI32<Frac> = _

√φ = 1.27201…

impl<Frac> FixedI32<Frac>

where Frac: IsLessOrEqual<U29, Output = True> + Unsigned,

This block contains constants in the range 2 ≤ x < 4.

These constants are not representable in signed fixed-point numbers with less than 3 integer bits.

Examples

use fixed::{consts, types::extra::U29, FixedI32};
type Fix = FixedI32<U29>;
assert_eq!(Fix::E, Fix::from_num(consts::E));
assert!(2 <= Fix::E && Fix::E < 4);

The following example fails to compile, since the maximum representable value with 30 fractional bits and 2 integer bits is < 2.

use fixed::{consts, types::extra::U30, FixedI32};
type Fix = FixedI32<U30>;
let _ = Fix::E;

pub const FRAC_TAU_2: FixedI32<Frac> = _

τ/2 = 3.14159…

pub const FRAC_TAU_3: FixedI32<Frac> = _

τ/3 = 2.09439…

pub const PI: FixedI32<Frac> = _

Archimedes’ constant, π = 3.14159…

pub const E: FixedI32<Frac> = _

Euler’s number, e = 2.71828…

pub const LOG2_10: FixedI32<Frac> = _

log₂ 10 = 3.32192…

pub const LN_10: FixedI32<Frac> = _

ln 10 = 2.30258…

impl<Frac> FixedI32<Frac>

where Frac: IsLessOrEqual<U28, Output = True> + Unsigned,

This block contains constants in the range 4 ≤ x < 8.

These constants are not representable in signed fixed-point numbers with less than 4 integer bits.

Examples

use fixed::{consts, types::extra::U28, FixedI32};
type Fix = FixedI32<U28>;
assert_eq!(Fix::TAU, Fix::from_num(consts::TAU));
assert!(4 <= Fix::TAU && Fix::TAU < 8);

The following example fails to compile, since the maximum representable value with 29 fractional bits and 3 integer bits is < 4.

use fixed::{consts, types::extra::U29, FixedI32};
type Fix = FixedI32<U29>;
let _ = Fix::TAU;

pub const TAU: FixedI32<Frac> = _

A turn, τ = 6.28318…

Trait Implementations

impl<Frac> Add<&FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the + operator.

fn add(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the + operation.

impl<Frac> Add<&FixedI32<Frac>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the + operator.

fn add(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the + operation.

impl<Frac> Add<FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the + operator.

fn add(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the + operation.

impl<Frac> Add for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the + operator.

fn add(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the + operation.

impl<Frac> AddAssign<&FixedI32<Frac>> for FixedI32<Frac>

fn add_assign(&mut self, rhs: &FixedI32<Frac>)

Performs the += operation.

impl<Frac> AddAssign for FixedI32<Frac>

fn add_assign(&mut self, rhs: FixedI32<Frac>)

Performs the += operation.

impl<'a, Frac> Arbitrary<'a> for FixedI32<Frac>

fn arbitrary(u: &mut Unstructured<'a>) -> ArbitraryResult<Self>

Generate an arbitrary value of Self from the given unstructured data.

fn size_hint(depth: usize) -> (usize, Option<usize>)

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself.

fn arbitrary_take_rest(u: Unstructured<'a>) -> Result<Self, Error>

Generate an arbitrary value of Self from the entirety of the given unstructured data.

impl<Frac: LeEqU32> Binary for FixedI32<Frac>

fn fmt(&self, f: &mut Formatter<'_>) -> FmtResult

Formats the value using the given formatter.

impl<Frac> BitAnd<&FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the & operator.

fn bitand(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the & operation.

impl<Frac> BitAnd<&FixedI32<Frac>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the & operator.

fn bitand(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the & operation.

impl<Frac> BitAnd<FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the & operator.

fn bitand(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the & operation.

impl<Frac> BitAnd for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the & operator.

fn bitand(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the & operation.

impl<Frac> BitAndAssign<&FixedI32<Frac>> for FixedI32<Frac>

fn bitand_assign(&mut self, rhs: &FixedI32<Frac>)

Performs the &= operation.

impl<Frac> BitAndAssign for FixedI32<Frac>

fn bitand_assign(&mut self, rhs: FixedI32<Frac>)

Performs the &= operation.

impl<Frac> BitOr<&FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the | operator.

fn bitor(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the | operation.

impl<Frac> BitOr<&FixedI32<Frac>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the | operator.

fn bitor(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the | operation.

impl<Frac> BitOr<FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the | operator.

fn bitor(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the | operation.

impl<Frac> BitOr for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the | operator.

fn bitor(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the | operation.

impl<Frac> BitOrAssign<&FixedI32<Frac>> for FixedI32<Frac>

fn bitor_assign(&mut self, rhs: &FixedI32<Frac>)

Performs the |= operation.

impl<Frac> BitOrAssign for FixedI32<Frac>

fn bitor_assign(&mut self, rhs: FixedI32<Frac>)

Performs the |= operation.

impl<Frac> BitXor<&FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the ^ operation.

impl<Frac> BitXor<&FixedI32<Frac>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the ^ operation.

impl<Frac> BitXor<FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the ^ operation.

impl<Frac> BitXor for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the ^ operation.

impl<Frac> BitXorAssign<&FixedI32<Frac>> for FixedI32<Frac>

fn bitxor_assign(&mut self, rhs: &FixedI32<Frac>)

Performs the ^= operation.

impl<Frac> BitXorAssign for FixedI32<Frac>

fn bitxor_assign(&mut self, rhs: FixedI32<Frac>)

Performs the ^= operation.

impl<Frac> BorshDeserialize for FixedI32<Frac>

fn deserialize_reader<R: Read>(reader: &mut R) -> Result<Self>

fn deserialize(buf: &mut &[u8]) -> Result<Self, Error>

Deserializes this instance from a given slice of bytes. Updates the buffer to point at the remaining bytes.

fn try_from_slice(v: &[u8]) -> Result<Self, Error>

Deserialize this instance from a slice of bytes.

fn try_from_reader<R>(reader: &mut R) -> Result<Self, Error>

where R: Read,

impl<Frac> BorshSerialize for FixedI32<Frac>

fn serialize<W: Write>(&self, writer: &mut W) -> Result<()>

impl<Frac> Bounded for FixedI32<Frac>

fn min_value() -> Self

Returns the smallest finite number this type can represent

fn max_value() -> Self

Returns the largest finite number this type can represent

impl<Frac: LeEqU32> Cast<F128> for FixedI32<Frac>

fn cast(self) -> F128

Casts the value.

impl<Frac: LeEqU32> Cast<F128Bits> for FixedI32<Frac>

fn cast(self) -> F128Bits

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> Cast<FixedI128<FracDst>> for FixedI32<FracSrc>

fn cast(self) -> FixedI128<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> Cast<FixedI16<FracDst>> for FixedI32<FracSrc>

fn cast(self) -> FixedI16<FracDst>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for F128

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for F128Bits

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for bf16

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for bool

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for f16

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for f32

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for f64

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for i128

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for i16

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for i32

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for i64

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for i8

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for isize

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for u128

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for u16

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for u32

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for u64

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for u8

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> Cast<FixedI32<Frac>> for usize

fn cast(self) -> FixedI32<Frac>

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> Cast<FixedI32<FracDst>> for FixedI128<FracSrc>

fn cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> Cast<FixedI32<FracDst>> for FixedI16<FracSrc>

fn cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> Cast<FixedI32<FracDst>> for FixedI32<FracSrc>

fn cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> Cast<FixedI32<FracDst>> for FixedI64<FracSrc>

fn cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> Cast<FixedI32<FracDst>> for FixedI8<FracSrc>

fn cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> Cast<FixedI32<FracDst>> for FixedU128<FracSrc>

fn cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> Cast<FixedI32<FracDst>> for FixedU16<FracSrc>

fn cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> Cast<FixedI32<FracDst>> for FixedU32<FracSrc>

fn cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> Cast<FixedI32<FracDst>> for FixedU64<FracSrc>

fn cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> Cast<FixedI32<FracDst>> for FixedU8<FracSrc>

fn cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> Cast<FixedI64<FracDst>> for FixedI32<FracSrc>

fn cast(self) -> FixedI64<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> Cast<FixedI8<FracDst>> for FixedI32<FracSrc>

fn cast(self) -> FixedI8<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> Cast<FixedU128<FracDst>> for FixedI32<FracSrc>

fn cast(self) -> FixedU128<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> Cast<FixedU16<FracDst>> for FixedI32<FracSrc>

fn cast(self) -> FixedU16<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> Cast<FixedU32<FracDst>> for FixedI32<FracSrc>

fn cast(self) -> FixedU32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> Cast<FixedU64<FracDst>> for FixedI32<FracSrc>

fn cast(self) -> FixedU64<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> Cast<FixedU8<FracDst>> for FixedI32<FracSrc>

fn cast(self) -> FixedU8<FracDst>

Casts the value.

impl<Frac: LeEqU32> Cast<bf16> for FixedI32<Frac>

fn cast(self) -> bf16

Casts the value.

impl<Frac: LeEqU32> Cast<f16> for FixedI32<Frac>

fn cast(self) -> f16

Casts the value.

impl<Frac: LeEqU32> Cast<f32> for FixedI32<Frac>

fn cast(self) -> f32

Casts the value.

impl<Frac: LeEqU32> Cast<f64> for FixedI32<Frac>

fn cast(self) -> f64

Casts the value.

impl<Frac: LeEqU32> Cast<i128> for FixedI32<Frac>

fn cast(self) -> i128

Casts the value.

impl<Frac: LeEqU32> Cast<i16> for FixedI32<Frac>

fn cast(self) -> i16

Casts the value.

impl<Frac: LeEqU32> Cast<i32> for FixedI32<Frac>

fn cast(self) -> i32

Casts the value.

impl<Frac: LeEqU32> Cast<i64> for FixedI32<Frac>

fn cast(self) -> i64

Casts the value.

impl<Frac: LeEqU32> Cast<i8> for FixedI32<Frac>

fn cast(self) -> i8

Casts the value.

impl<Frac: LeEqU32> Cast<isize> for FixedI32<Frac>

fn cast(self) -> isize

Casts the value.

impl<Frac: LeEqU32> Cast<u128> for FixedI32<Frac>

fn cast(self) -> u128

Casts the value.

impl<Frac: LeEqU32> Cast<u16> for FixedI32<Frac>

fn cast(self) -> u16

Casts the value.

impl<Frac: LeEqU32> Cast<u32> for FixedI32<Frac>

fn cast(self) -> u32

Casts the value.

impl<Frac: LeEqU32> Cast<u64> for FixedI32<Frac>

fn cast(self) -> u64

Casts the value.

impl<Frac: LeEqU32> Cast<u8> for FixedI32<Frac>

fn cast(self) -> u8

Casts the value.

impl<Frac: LeEqU32> Cast<usize> for FixedI32<Frac>

fn cast(self) -> usize

Casts the value.

impl<Frac> CheckedAdd for FixedI32<Frac>

fn checked_add(&self, v: &Self) -> Option<Self>

Adds two numbers, checking for overflow. If overflow happens, None is returned.

impl<Frac: LeEqU32> CheckedCast<F128> for FixedI32<Frac>

fn checked_cast(self) -> Option<F128>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<F128Bits> for FixedI32<Frac>

fn checked_cast(self) -> Option<F128Bits>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> CheckedCast<FixedI128<FracDst>> for FixedI32<FracSrc>

fn checked_cast(self) -> Option<FixedI128<FracDst>>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> CheckedCast<FixedI16<FracDst>> for FixedI32<FracSrc>

fn checked_cast(self) -> Option<FixedI16<FracDst>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for F128

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for F128Bits

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for bf16

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for bool

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for f16

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for f32

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for f64

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for i128

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for i16

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for i32

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for i64

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for i8

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for isize

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for u128

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for u16

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for u32

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for u64

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for u8

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<FixedI32<Frac>> for usize

fn checked_cast(self) -> Option<FixedI32<Frac>>

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> CheckedCast<FixedI32<FracDst>> for FixedI128<FracSrc>

fn checked_cast(self) -> Option<FixedI32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> CheckedCast<FixedI32<FracDst>> for FixedI16<FracSrc>

fn checked_cast(self) -> Option<FixedI32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> CheckedCast<FixedI32<FracDst>> for FixedI32<FracSrc>

fn checked_cast(self) -> Option<FixedI32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> CheckedCast<FixedI32<FracDst>> for FixedI64<FracSrc>

fn checked_cast(self) -> Option<FixedI32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> CheckedCast<FixedI32<FracDst>> for FixedI8<FracSrc>

fn checked_cast(self) -> Option<FixedI32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> CheckedCast<FixedI32<FracDst>> for FixedU128<FracSrc>

fn checked_cast(self) -> Option<FixedI32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> CheckedCast<FixedI32<FracDst>> for FixedU16<FracSrc>

fn checked_cast(self) -> Option<FixedI32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> CheckedCast<FixedI32<FracDst>> for FixedU32<FracSrc>

fn checked_cast(self) -> Option<FixedI32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> CheckedCast<FixedI32<FracDst>> for FixedU64<FracSrc>

fn checked_cast(self) -> Option<FixedI32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> CheckedCast<FixedI32<FracDst>> for FixedU8<FracSrc>

fn checked_cast(self) -> Option<FixedI32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> CheckedCast<FixedI64<FracDst>> for FixedI32<FracSrc>

fn checked_cast(self) -> Option<FixedI64<FracDst>>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> CheckedCast<FixedI8<FracDst>> for FixedI32<FracSrc>

fn checked_cast(self) -> Option<FixedI8<FracDst>>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> CheckedCast<FixedU128<FracDst>> for FixedI32<FracSrc>

fn checked_cast(self) -> Option<FixedU128<FracDst>>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> CheckedCast<FixedU16<FracDst>> for FixedI32<FracSrc>

fn checked_cast(self) -> Option<FixedU16<FracDst>>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> CheckedCast<FixedU32<FracDst>> for FixedI32<FracSrc>

fn checked_cast(self) -> Option<FixedU32<FracDst>>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> CheckedCast<FixedU64<FracDst>> for FixedI32<FracSrc>

fn checked_cast(self) -> Option<FixedU64<FracDst>>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> CheckedCast<FixedU8<FracDst>> for FixedI32<FracSrc>

fn checked_cast(self) -> Option<FixedU8<FracDst>>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<bf16> for FixedI32<Frac>

fn checked_cast(self) -> Option<bf16>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<f16> for FixedI32<Frac>

fn checked_cast(self) -> Option<f16>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<f32> for FixedI32<Frac>

fn checked_cast(self) -> Option<f32>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<f64> for FixedI32<Frac>

fn checked_cast(self) -> Option<f64>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<i128> for FixedI32<Frac>

fn checked_cast(self) -> Option<i128>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<i16> for FixedI32<Frac>

fn checked_cast(self) -> Option<i16>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<i32> for FixedI32<Frac>

fn checked_cast(self) -> Option<i32>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<i64> for FixedI32<Frac>

fn checked_cast(self) -> Option<i64>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<i8> for FixedI32<Frac>

fn checked_cast(self) -> Option<i8>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<isize> for FixedI32<Frac>

fn checked_cast(self) -> Option<isize>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<u128> for FixedI32<Frac>

fn checked_cast(self) -> Option<u128>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<u16> for FixedI32<Frac>

fn checked_cast(self) -> Option<u16>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<u32> for FixedI32<Frac>

fn checked_cast(self) -> Option<u32>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<u64> for FixedI32<Frac>

fn checked_cast(self) -> Option<u64>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<u8> for FixedI32<Frac>

fn checked_cast(self) -> Option<u8>

Casts the value.

impl<Frac: LeEqU32> CheckedCast<usize> for FixedI32<Frac>

fn checked_cast(self) -> Option<usize>

Casts the value.

impl<Frac: LeEqU32> CheckedDiv for FixedI32<Frac>

fn checked_div(&self, v: &Self) -> Option<Self>

Divides two numbers, checking for underflow, overflow and division by zero. If any of that happens, None is returned.

impl<Frac: LeEqU32> CheckedMul for FixedI32<Frac>

fn checked_mul(&self, v: &Self) -> Option<Self>

Multiplies two numbers, checking for underflow or overflow. If underflow or overflow happens, None is returned.

impl<Frac> CheckedNeg for FixedI32<Frac>

fn checked_neg(&self) -> Option<Self>

Negates a number, returning None for results that can’t be represented, like signed MIN values that can’t be positive, or non-zero unsigned values that can’t be negative.

impl<Frac> CheckedRem for FixedI32<Frac>

fn checked_rem(&self, v: &Self) -> Option<Self>

Finds the remainder of dividing two numbers, checking for underflow, overflow and division by zero. If any of that happens, None is returned.

impl<Frac> CheckedShl for FixedI32<Frac>

fn checked_shl(&self, rhs: u32) -> Option<Self>

Checked shift left. Computes self << rhs, returning None if rhs is larger than or equal to the number of bits in self.

impl<Frac> CheckedShr for FixedI32<Frac>

fn checked_shr(&self, rhs: u32) -> Option<Self>

Checked shift right. Computes self >> rhs, returning None if rhs is larger than or equal to the number of bits in self.

impl<Frac> CheckedSub for FixedI32<Frac>

fn checked_sub(&self, v: &Self) -> Option<Self>

Subtracts two numbers, checking for underflow. If underflow happens, None is returned.

impl<Frac> Clone for FixedI32<Frac>

fn clone(&self) -> FixedI32<Frac>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<Frac: 'static> Contiguous for FixedI32<Frac>

type Int = i32

The primitive integer type with an identical representation to this type.

const MAX_VALUE: i32 = 2_147_483_647i32

The upper inclusive bound for valid instances of this type.

const MIN_VALUE: i32 = -2_147_483_648i32

The lower inclusive bound for valid instances of this type.

fn from_integer(value: Self::Int) -> Option<Self>

If value is within the range for valid instances of this type, returns Some(converted_value), otherwise, returns None.

fn into_integer(self) -> Self::Int

Perform the conversion from C into the underlying integral type. This mostly exists otherwise generic code would need unsafe for the value as integer

impl<Frac: Unsigned> Debug for FixedI32<Frac>

fn fmt(&self, f: &mut Formatter<'_>) -> FmtResult

Formats the value using the given formatter.

impl<Frac> Default for FixedI32<Frac>

fn default() -> Self

Returns the “default value” for a type.

impl<'de, Frac: LeEqU32> Deserialize<'de> for FixedI32<Frac>

fn deserialize<D: Deserializer<'de>>(deserializer: D) -> Result<Self, D::Error>

Deserialize this value from the given Serde deserializer.

impl<Frac: LeEqU32> Display for FixedI32<Frac>

fn fmt(&self, f: &mut Formatter<'_>) -> FmtResult

Formats the value using the given formatter.

impl<Frac: LeEqU32> Div<&FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the / operator.

fn div(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the / operation.

impl<Frac: LeEqU32> Div<&FixedI32<Frac>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the / operator.

fn div(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the / operation.

impl<Frac: LeEqU32> Div<&i32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the / operator.

fn div(self, rhs: &i32) -> FixedI32<Frac>

Performs the / operation.

impl<Frac: LeEqU32> Div<&i32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the / operator.

fn div(self, rhs: &i32) -> FixedI32<Frac>

Performs the / operation.

impl<Frac: LeEqU32> Div<FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the / operator.

fn div(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the / operation.

impl<Frac: LeEqU32> Div<i32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the / operator.

fn div(self, rhs: i32) -> FixedI32<Frac>

Performs the / operation.

impl<Frac> Div<i32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the / operator.

fn div(self, rhs: i32) -> FixedI32<Frac>

Performs the / operation.

impl<Frac: LeEqU32> Div for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the / operator.

fn div(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the / operation.

impl<Frac: LeEqU32> DivAssign<&FixedI32<Frac>> for FixedI32<Frac>

fn div_assign(&mut self, rhs: &FixedI32<Frac>)

Performs the /= operation.

impl<Frac: LeEqU32> DivAssign<&i32> for FixedI32<Frac>

fn div_assign(&mut self, rhs: &i32)

Performs the /= operation.

impl<Frac: LeEqU32> DivAssign<i32> for FixedI32<Frac>

fn div_assign(&mut self, rhs: i32)

Performs the /= operation.

impl<Frac: LeEqU32> DivAssign for FixedI32<Frac>

fn div_assign(&mut self, rhs: FixedI32<Frac>)

Performs the /= operation.

impl<Frac: LeEqU32> Fixed for FixedI32<Frac>

type Bits = i32

The primitive integer underlying type.

type NonZeroBits = NonZero<i32>

The non-zero wrapped version of Bits.

type Bytes = [u8; 4]

A byte array with the same size as the type.

type Frac = Frac

The number of fractional bits as a compile-time Unsigned as provided by the typenum crate.

type Signed = FixedI32<Frac>

An unsigned fixed-point number type with the same number of integer and fractional bits as Self.

type Unsigned = FixedU32<Frac>

An unsigned fixed-point number type with the same number of integer and fractional bits as Self.

const ZERO: Self = Self::ZERO

Zero.

const TRY_ONE: Option<Self> = Self::TRY_ONE

One if the fixed-point number can represent it, otherwise None.

const DELTA: Self = Self::DELTA

The difference between any two successive representable numbers, Δ.

const MIN: Self = Self::MIN

The smallest value that can be represented.

const MAX: Self = Self::MAX

The largest value that can be represented.

const IS_SIGNED: bool = true

true if the type is signed.

const INT_NBITS: u32 = Self::INT_NBITS

The number of integer bits.

const FRAC_NBITS: u32 = Self::FRAC_NBITS

The number of fractional bits.

fn from_bits(bits: Self::Bits) -> Self

Creates a fixed-point number that has a bitwise representation identical to the given integer.

fn to_bits(self) -> Self::Bits

Creates an integer that has a bitwise representation identical to the given fixed-point number.

fn from_be(fixed: Self) -> Self

Converts a fixed-point number from big endian to the target’s endianness.

fn from_le(fixed: Self) -> Self

Converts a fixed-point number from little endian to the target’s endianness.

fn to_be(self) -> Self

Converts this fixed-point number to big endian from the target’s endianness.

fn to_le(self) -> Self

Converts this fixed-point number to little endian from the target’s endianness.

fn swap_bytes(self) -> Self

Reverses the byte order of the fixed-point number.

fn from_be_bytes(bits: Self::Bytes) -> Self

Creates a fixed-point number from its representation as a byte array in big endian.

fn from_le_bytes(bits: Self::Bytes) -> Self

Creates a fixed-point number from its representation as a byte array in little endian.

fn from_ne_bytes(bits: Self::Bytes) -> Self

Creates a fixed-point number from its representation as a byte array in native endian.

fn to_be_bytes(self) -> Self::Bytes

Returns the memory representation of this fixed-point number as a byte array in big-endian byte order.

fn to_le_bytes(self) -> Self::Bytes

Returns the memory representation of this fixed-point number as a byte array in little-endian byte order.

fn to_ne_bytes(self) -> Self::Bytes

Returns the memory representation of this fixed-point number as a byte array in native byte order.

fn from_num<Src: ToFixed>(src: Src) -> Self

Creates a fixed-point number from another number.

fn to_num<Dst: FromFixed>(self) -> Dst

Converts a fixed-point number to another number.

fn checked_from_num<Src: ToFixed>(val: Src) -> Option<Self>

Creates a fixed-point number from another number if it fits, otherwise returns None.

fn checked_to_num<Dst: FromFixed>(self) -> Option<Dst>

Converts a fixed-point number to another number if it fits, otherwise returns None.

fn saturating_from_num<Src: ToFixed>(val: Src) -> Self

Creates a fixed-point number from another number, saturating the value if it does not fit.

fn saturating_to_num<Dst: FromFixed>(self) -> Dst

Converts a fixed-point number to another number, saturating the value if it does not fit.

fn wrapping_from_num<Src: ToFixed>(val: Src) -> Self

Creates a fixed-point number from another number, wrapping the value on overflow.

fn wrapping_to_num<Dst: FromFixed>(self) -> Dst

Converts a fixed-point number to another number, wrapping the value on overflow.

fn unwrapped_from_num<Src: ToFixed>(val: Src) -> Self

Creates a fixed-point number from another number, panicking on overflow.

fn unwrapped_to_num<Dst: FromFixed>(self) -> Dst

Converts a fixed-point number to another number, panicking on overflow.

fn overflowing_from_num<Src: ToFixed>(val: Src) -> (Self, bool)

Creates a fixed-point number from another number.

fn overflowing_to_num<Dst: FromFixed>(self) -> (Dst, bool)

Converts a fixed-point number to another number.

fn from_str_binary(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing binary digits to return a fixed-point number.

fn from_str_octal(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing octal digits to return a fixed-point number.

fn from_str_hex(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing hexadecimal digits to return a fixed-point number.

fn saturating_from_str(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing decimal digits to return a fixed-point number, saturating on overflow.

fn saturating_from_str_binary(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing binary digits to return a fixed-point number, saturating on overflow.

fn saturating_from_str_octal(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing octal digits to return a fixed-point number, saturating on overflow.

fn saturating_from_str_hex(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing hexadecimal digits to return a fixed-point number, saturating on overflow.

fn wrapping_from_str(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing decimal digits to return a fixed-point number, wrapping on overflow.

fn wrapping_from_str_binary(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing binary digits to return a fixed-point number, wrapping on overflow.

fn wrapping_from_str_octal(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing octal digits to return a fixed-point number, wrapping on overflow.

fn wrapping_from_str_hex(src: &str) -> Result<Self, ParseFixedError>

Parses a string slice containing hexadecimal digits to return a fixed-point number, wrapping on overflow.

fn unwrapped_from_str(src: &str) -> Self

Parses a string slice containing decimal digits to return a fixed-point number, panicking on overflow.

fn unwrapped_from_str_binary(src: &str) -> Self

Parses a string slice containing binary digits to return a fixed-point number, panicking on overflow.

fn unwrapped_from_str_octal(src: &str) -> Self

Parses a string slice containing octal digits to return a fixed-point number, panicking on overflow.

fn unwrapped_from_str_hex(src: &str) -> Self

Parses a string slice containing hexadecimal digits to return a fixed-point number, panicking on overflow.

fn overflowing_from_str(src: &str) -> Result<(Self, bool), ParseFixedError>

Parses a string slice containing decimal digits to return a fixed-point number.

fn overflowing_from_str_binary( src: &str ) -> Result<(Self, bool), ParseFixedError>

Parses a string slice containing binary digits to return a fixed-point number.

fn overflowing_from_str_octal( src: &str ) -> Result<(Self, bool), ParseFixedError>

Parses a string slice containing octal digits to return a fixed-point number.

fn overflowing_from_str_hex(src: &str) -> Result<(Self, bool), ParseFixedError>

Parses a string slice containing hexadecimal digits to return a fixed-point number.

fn int(self) -> Self

Returns the integer part.

fn frac(self) -> Self

Returns the fractional part.

fn ceil(self) -> Self

Rounds to the next integer towards +∞.

fn floor(self) -> Self

Rounds to the next integer towards −∞.

fn round_to_zero(self) -> Self

Rounds to the next integer towards 0.

fn round(self) -> Self

Rounds to the nearest integer, with ties rounded away from zero.

fn round_ties_to_even(self) -> Self

Rounds to the nearest integer, with ties rounded to even.

fn checked_ceil(self) -> Option<Self>

Checked ceil. Rounds to the next integer towards +∞, returning None on overflow.

fn checked_floor(self) -> Option<Self>

Checked floor. Rounds to the next integer towards −∞, returning None on overflow.

fn checked_round(self) -> Option<Self>

Checked round. Rounds to the nearest integer, with ties rounded away from zero, returning None on overflow.

fn checked_round_ties_to_even(self) -> Option<Self>

Checked round. Rounds to the nearest integer, with ties rounded to even, returning None on overflow.

fn saturating_ceil(self) -> Self

Saturating ceil. Rounds to the next integer towards +∞, saturating on overflow.

fn saturating_floor(self) -> Self

Saturating floor. Rounds to the next integer towards −∞, saturating on overflow.

fn saturating_round(self) -> Self

Saturating round. Rounds to the nearest integer, with ties rounded away from zero, and saturating on overflow.

fn saturating_round_ties_to_even(self) -> Self

Saturating round. Rounds to the nearest integer, with ties rounded to_even, and saturating on overflow.

fn wrapping_ceil(self) -> Self

Wrapping ceil. Rounds to the next integer towards +∞, wrapping on overflow.

fn wrapping_floor(self) -> Self

Wrapping floor. Rounds to the next integer towards −∞, wrapping on overflow.

fn wrapping_round(self) -> Self

Wrapping round. Rounds to the next integer to the nearest, with ties rounded away from zero, and wrapping on overflow.

fn wrapping_round_ties_to_even(self) -> Self

Wrapping round. Rounds to the next integer to the nearest, with ties rounded to even, and wrapping on overflow.

fn unwrapped_ceil(self) -> Self

Unwrapped ceil. Rounds to the next integer towards +∞, panicking on overflow.

fn unwrapped_floor(self) -> Self

Unwrapped floor. Rounds to the next integer towards −∞, panicking on overflow.

fn unwrapped_round(self) -> Self

Unwrapped round. Rounds to the next integer to the nearest, with ties rounded away from zero, and panicking on overflow.

fn unwrapped_round_ties_to_even(self) -> Self

Unwrapped round. Rounds to the next integer to the nearest, with ties rounded to even, and panicking on overflow.

fn overflowing_ceil(self) -> (Self, bool)

Overflowing ceil. Rounds to the next integer towards +∞.

fn overflowing_floor(self) -> (Self, bool)

Overflowing floor. Rounds to the next integer towards −∞.

fn overflowing_round(self) -> (Self, bool)

Overflowing round. Rounds to the next integer to the nearest, with ties rounded away from zero.

fn overflowing_round_ties_to_even(self) -> (Self, bool)

Overflowing round. Rounds to the next integer to the nearest, with ties rounded to even.

fn count_ones(self) -> u32

Returns the number of ones in the binary representation.

fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation.

fn leading_ones(self) -> u32

Returns the number of leading ones in the binary representation.

fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation.

fn trailing_ones(self) -> u32

Returns the number of trailing ones in the binary representation.

fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation.

fn int_log2(self) -> i32

Integer base-2 logarithm, rounded down.

fn int_log10(self) -> i32

Integer base-10 logarithm, rounded down.

fn int_log(self, base: u32) -> i32

Integer logarithm to the specified base, rounded down.

fn checked_int_log2(self) -> Option<i32>

Checked integer base-2 logarithm, rounded down. Returns the logarithm or None if the fixed-point number is ≤ 0.

fn checked_int_log10(self) -> Option<i32>

Checked integer base-10 logarithm, rounded down. Returns the logarithm or None if the fixed-point number is ≤ 0.

fn checked_int_log(self, base: u32) -> Option<i32>

Checked integer logarithm to the specified base, rounded down. Returns the logarithm, or None if the fixed-point number is ≤ 0 or if the base is < 2.

fn reverse_bits(self) -> Self

Reverses the order of the bits of the fixed-point number.

fn rotate_left(self, n: u32) -> Self

Shifts to the left by n bits, wrapping the truncated bits to the right end.

fn rotate_right(self, n: u32) -> Self

Shifts to the right by n bits, wrapping the truncated bits to the left end.

fn is_zero(self) -> bool

Returns true if the number is zero.

fn dist(self, other: Self) -> Self

Returns the distance from self to other.

fn abs_diff(self, other: Self) -> Self::Unsigned

Returns the absolute value of the difference between self and other using an unsigned type without any wrapping or panicking.

fn mean(self, other: Self) -> Self

Returns the mean of self and other.

fn hypot(self, other: Self) -> Self

Compute the hypotenuse of a right triange.

fn recip(self) -> Self

Returns the reciprocal.

fn next_multiple_of(self, other: Self) -> Self

Returns the next multiple of other.

fn mul_add(self, mul: Self, add: Self) -> Self

Multiply and add. Returns self × mul + add.

fn add_prod(self, a: Self, b: Self) -> Self

Adds self to the product a × b.

fn mul_acc(&mut self, a: Self, b: Self)

Multiply and accumulate. Adds (a × b) to self.

fn div_euclid(self, rhs: Self) -> Self

Euclidean division by an integer.

fn rem_euclid(self, rhs: Self) -> Self

Remainder for Euclidean division.

fn div_euclid_int(self, rhs: Self::Bits) -> Self

Euclidean division by an integer.

fn rem_euclid_int(self, rhs: Self::Bits) -> Self

Remainder for Euclidean division by an integer.

fn sqrt(self) -> Self

Returns the square root.

fn lerp(self, start: Self, end: Self) -> Self

Linear interpolation between start and end.

fn inv_lerp(self, start: Self, end: Self) -> Self

Inverse linear interpolation between start and end.

fn checked_neg(self) -> Option<Self>

Checked negation. Returns the negated value, or None on overflow.

fn checked_add(self, rhs: Self) -> Option<Self>

Checked addition. Returns the sum, or None on overflow.

fn checked_sub(self, rhs: Self) -> Option<Self>

Checked subtraction. Returns the difference, or None on overflow.

fn checked_mul(self, rhs: Self) -> Option<Self>

Checked multiplication. Returns the product, or None on overflow.

fn checked_div(self, rhs: Self) -> Option<Self>

Checked division. Returns the quotient, or None if the divisor is zero or on overflow.

fn checked_rem(self, rhs: Self) -> Option<Self>

Checked remainder. Returns the remainder, or None if the divisor is zero.

fn checked_recip(self) -> Option<Self>

Checked reciprocal. Returns the reciprocal, or None if self is zero or on overflow.

fn checked_next_multiple_of(self, other: Self) -> Option<Self>

Checked next multiple of other. Returns the next multiple, or None if other is zero or on overflow.

fn checked_mul_add(self, mul: Self, add: Self) -> Option<Self>

Checked multiply and add. Returns self × mul + add, or None on overflow.

fn checked_add_prod(self, a: Self, b: Self) -> Option<Self>

Adds self to the product a × b, returning None on overflow.

fn checked_mul_acc(&mut self, a: Self, b: Self) -> Option<()>

Checked multiply and accumulate. Adds (a × b) to self, or returns None on overflow.

fn checked_div_euclid(self, rhs: Self) -> Option<Self>

Checked remainder for Euclidean division. Returns the remainder, or None if the divisor is zero or the division results in overflow.

fn checked_rem_euclid(self, rhs: Self) -> Option<Self>

Checked remainder for Euclidean division. Returns the remainder, or None if the divisor is zero.

fn checked_mul_int(self, rhs: Self::Bits) -> Option<Self>

Checked multiplication by an integer. Returns the product, or None on overflow.

fn checked_div_int(self, rhs: Self::Bits) -> Option<Self>

Checked division by an integer. Returns the quotient, or None if the divisor is zero or if the division results in overflow.

fn checked_rem_int(self, rhs: Self::Bits) -> Option<Self>

Checked fixed-point remainder for division by an integer. Returns the remainder, or None if the divisor is zero or if the division results in overflow.

fn checked_div_euclid_int(self, rhs: Self::Bits) -> Option<Self>

Checked Euclidean division by an integer. Returns the quotient, or None if the divisor is zero or if the division results in overflow.

fn checked_rem_euclid_int(self, rhs: Self::Bits) -> Option<Self>

Checked remainder for Euclidean division by an integer. Returns the remainder, or None if the divisor is zero or if the remainder results in overflow.

fn checked_shl(self, rhs: u32) -> Option<Self>

Checked shift left. Returns the shifted number, or None if rhs ≥ the number of bits.

fn checked_shr(self, rhs: u32) -> Option<Self>

Checked shift right. Returns the shifted number, or None if rhs ≥ the number of bits.

fn checked_dist(self, other: Self) -> Option<Self>

Checked distance. Returns the distance from self to other, or None on overflow.

fn checked_hypot(self, other: Self) -> Option<Self>

Compute the hypotenuse of a right triange, returning None on overflow.

fn checked_sqrt(self) -> Option<Self>

Checked square root. Returns None for negative numbers or on overflow.

fn checked_lerp(self, start: Self, end: Self) -> Option<Self>

Checked linear interpolation between start and end. Returns None on overflow.

fn checked_inv_lerp(self, start: Self, end: Self) -> Option<Self>

Checked inverse linear interpolation between start and end. Returns None when start = end or on overflow.

fn saturating_neg(self) -> Self

Saturated negation. Returns the negated value, saturating on overflow.

fn saturating_add(self, rhs: Self) -> Self

Saturating addition. Returns the sum, saturating on overflow.

fn saturating_sub(self, rhs: Self) -> Self

Saturating subtraction. Returns the difference, saturating on overflow.

fn saturating_mul(self, rhs: Self) -> Self

Saturating multiplication. Returns the product, saturating on overflow.

fn saturating_div(self, rhs: Self) -> Self

Saturating division. Returns the quotient, saturating on overflow.

fn saturating_recip(self) -> Self

Saturating reciprocal.

fn saturating_next_multiple_of(self, other: Self) -> Self

Saturating next multiple of other.

fn saturating_mul_add(self, mul: Self, add: Self) -> Self

Saturating multiply and add. Returns self × mul + add, saturating on overflow.

fn saturating_add_prod(self, a: Self, b: Self) -> Self

Adds self to the product a × b, saturating on overflow.

fn saturating_mul_acc(&mut self, a: Self, b: Self)

Saturating multiply and add. Adds (a × b) to self, saturating on overflow.

fn saturating_div_euclid(self, rhs: Self) -> Self

Saturating Euclidean division. Returns the quotient, saturating on overflow.

fn saturating_mul_int(self, rhs: Self::Bits) -> Self

Saturating multiplication by an integer. Returns the product, saturating on overflow.

fn saturating_div_int(self, rhs: Self::Bits) -> Self

Saturating division by an integer. Returns the quotient, saturating on overflow.

fn saturating_div_euclid_int(self, rhs: Self::Bits) -> Self

Saturating Euclidean division by an integer. Returns the quotient, saturating on overflow.

fn saturating_rem_euclid_int(self, rhs: Self::Bits) -> Self

Saturating remainder for Euclidean division by an integer. Returns the remainder, saturating on overflow.

fn saturating_dist(self, other: Self) -> Self

Saturating distance. Returns the distance from self to other, saturating on overflow.

fn saturating_hypot(self, other: Self) -> Self

Compute the hypotenuse of a right triange, saturating on overflow.

fn saturating_sqrt(self) -> Self

Returns the square root, saturating on overflow.

fn saturating_lerp(self, start: Self, end: Self) -> Self

Linear interpolation between start and end, saturating on overflow.

fn saturating_inv_lerp(self, start: Self, end: Self) -> Self

Inverse linear interpolation between start and end, saturating on overflow.

fn wrapping_neg(self) -> Self

Wrapping negation. Returns the negated value, wrapping on overflow.

fn wrapping_add(self, rhs: Self) -> Self

Wrapping addition. Returns the sum, wrapping on overflow.

fn wrapping_sub(self, rhs: Self) -> Self

Wrapping subtraction. Returns the difference, wrapping on overflow.

fn wrapping_mul(self, rhs: Self) -> Self

Wrapping multiplication. Returns the product, wrapping on overflow.

fn wrapping_div(self, rhs: Self) -> Self

Wrapping division. Returns the quotient, wrapping on overflow.

fn wrapping_recip(self) -> Self

Wrapping reciprocal.

fn wrapping_next_multiple_of(self, other: Self) -> Self

Wrapping next multiple of other.

fn wrapping_mul_add(self, mul: Self, add: Self) -> Self

Wrapping multiply and add. Returns self × mul + add, wrapping on overflow.

fn wrapping_add_prod(self, a: Self, b: Self) -> Self

Adds self to the product a × b, wrapping on overflow.

fn wrapping_mul_acc(&mut self, a: Self, b: Self)

Wrapping multiply and accumulate. Adds (a × b) to self, wrapping on overflow.

fn wrapping_div_euclid(self, rhs: Self) -> Self

Wrapping Euclidean division. Returns the quotient, wrapping on overflow.

fn wrapping_mul_int(self, rhs: Self::Bits) -> Self

Wrapping multiplication by an integer. Returns the product, wrapping on overflow.

fn wrapping_div_int(self, rhs: Self::Bits) -> Self

Wrapping division by an integer. Returns the quotient, wrapping on overflow.

fn wrapping_div_euclid_int(self, rhs: Self::Bits) -> Self

Wrapping Euclidean division by an integer. Returns the quotient, wrapping on overflow.

fn wrapping_rem_euclid_int(self, rhs: Self::Bits) -> Self

Wrapping remainder for Euclidean division by an integer. Returns the remainder, wrapping on overflow.

fn wrapping_shl(self, rhs: u32) -> Self

Wrapping shift left. Wraps rhs if rhs ≥ the number of bits, then shifts and returns the number.

fn wrapping_shr(self, rhs: u32) -> Self

Wrapping shift right. Wraps rhs if rhs ≥ the number of bits, then shifts and returns the number.

fn wrapping_dist(self, other: Self) -> Self

Wrapping distance. Returns the distance from self to other, wrapping on overflow.

fn wrapping_hypot(self, other: Self) -> Self

Compute the hypotenuse of a right triange, wrapping on overflow.

fn wrapping_sqrt(self) -> Self

Returns the square root, wrapping on overflow.

fn wrapping_lerp(self, start: Self, end: Self) -> Self

Linear interpolation between start and end, wrapping on overflow.

fn wrapping_inv_lerp(self, start: Self, end: Self) -> Self

Inverse linear interpolation between start and end, wrapping on overflow.

fn unwrapped_neg(self) -> Self

Unwrapped negation. Returns the negated value, panicking on overflow.

fn unwrapped_add(self, rhs: Self) -> Self

Unwrapped addition. Returns the sum, panicking on overflow.

fn unwrapped_sub(self, rhs: Self) -> Self

Unwrapped subtraction. Returns the difference, panicking on overflow.

fn unwrapped_mul(self, rhs: Self) -> Self

Unwrapped multiplication. Returns the product, panicking on overflow.

fn unwrapped_div(self, rhs: Self) -> Self

Unwrapped division. Returns the quotient, panicking on overflow.

fn unwrapped_rem(self, rhs: Self) -> Self

Unwrapped remainder. Returns the quotient, panicking if the divisor is zero.

fn unwrapped_recip(self) -> Self

Unwrapped reciprocal. Returns reciprocal, panicking on overflow.

fn unwrapped_next_multiple_of(self, other: Self) -> Self

Unwrapped next multiple of other. Returns the next multiple, panicking on overflow.

fn unwrapped_mul_add(self, mul: Self, add: Self) -> Self

Unwrapped multiply and add. Returns self × mul + add, panicking on overflow.

fn unwrapped_add_prod(self, a: Self, b: Self) -> Self

Adds self to the product a × b, panicking on overflow.

fn unwrapped_mul_acc(&mut self, a: Self, b: Self)

Unwrapped multiply and accumulate. Adds (a × b) to self, panicking on overflow.

fn unwrapped_div_euclid(self, rhs: Self) -> Self

Unwrapped Euclidean division. Returns the quotient, panicking on overflow.

fn unwrapped_rem_euclid(self, rhs: Self) -> Self

Unwrapped remainder for Euclidean division. Returns the remainder, panicking if the divisor is zero.

fn unwrapped_mul_int(self, rhs: Self::Bits) -> Self

Unwrapped multiplication by an integer. Returns the product, panicking on overflow.

fn unwrapped_div_int(self, rhs: Self::Bits) -> Self

Unwrapped division by an integer. Returns the quotient, panicking on overflow.

fn unwrapped_rem_int(self, rhs: Self::Bits) -> Self

Unwrapped remainder for division by an integer. Returns the remainder, panicking if the divisor is zero.

fn unwrapped_div_euclid_int(self, rhs: Self::Bits) -> Self

Unwrapped Euclidean division by an integer. Returns the quotient, panicking on overflow.

fn unwrapped_rem_euclid_int(self, rhs: Self::Bits) -> Self

Unwrapped remainder for Euclidean division by an integer. Returns the remainder, panicking on overflow.

fn unwrapped_shl(self, rhs: u32) -> Self

Unwrapped shift left. Panics if rhs ≥ the number of bits.

fn unwrapped_shr(self, rhs: u32) -> Self

Unwrapped shift right. Panics if rhs ≥ the number of bits.

fn unwrapped_dist(self, other: Self) -> Self

Unwrapped distance. Returns the distance from self to other, panicking on overflow.

fn unwrapped_hypot(self, other: Self) -> Self

Compute the hypotenuse of a right triange, panicking on overflow.

fn unwrapped_sqrt(self) -> Self

Returns the square root, panicking if the number is negative or on overflow.

fn unwrapped_lerp(self, start: Self, end: Self) -> Self

Linear interpolation between start and end, panicking on overflow.

fn unwrapped_inv_lerp(self, start: Self, end: Self) -> Self

Inverse linear interpolation between start and end, panicking on overflow.

fn overflowing_neg(self) -> (Self, bool)

Overflowing negation.

fn overflowing_add(self, rhs: Self) -> (Self, bool)

Overflowing addition.

fn overflowing_sub(self, rhs: Self) -> (Self, bool)

Overflowing subtraction.

fn overflowing_mul(self, rhs: Self) -> (Self, bool)

Overflowing multiplication.

fn overflowing_div(self, rhs: Self) -> (Self, bool)

Overflowing division.

fn overflowing_recip(self) -> (Self, bool)

Overflowing reciprocal.

fn overflowing_next_multiple_of(self, other: Self) -> (Self, bool)

Overflowing next multiple of other.

fn overflowing_mul_add(self, mul: Self, add: Self) -> (Self, bool)

Overflowing multiply and add.

fn overflowing_add_prod(self, a: Self, b: Self) -> (Self, bool)

Adds self to the product a × b.

fn overflowing_mul_acc(&mut self, a: Self, b: Self) -> bool

Overflowing multiply and accumulate. Adds (a × b) to self, wrapping and returning true if overflow occurs.

fn overflowing_div_euclid(self, rhs: Self) -> (Self, bool)

Overflowing Euclidean division.

fn overflowing_mul_int(self, rhs: Self::Bits) -> (Self, bool)

Overflowing multiplication by an integer.

fn overflowing_div_int(self, rhs: Self::Bits) -> (Self, bool)

Overflowing division by an integer.

fn overflowing_div_euclid_int(self, rhs: Self::Bits) -> (Self, bool)

Overflowing Euclidean division by an integer.

fn overflowing_rem_euclid_int(self, rhs: Self::Bits) -> (Self, bool)

Overflowing remainder for Euclidean division by an integer.

fn overflowing_shl(self, rhs: u32) -> (Self, bool)

Overflowing shift left.

fn overflowing_shr(self, rhs: u32) -> (Self, bool)

Overflowing shift right.

fn overflowing_dist(self, other: Self) -> (Self, bool)

Overflowing distance.

fn overflowing_hypot(self, other: Self) -> (Self, bool)

Compute the hypotenuse of a right triange.

fn overflowing_sqrt(self) -> (Self, bool)

Compute the square root.

fn overflowing_lerp(self, start: Self, end: Self) -> (Self, bool)

Overflowing linear interpolation between start and end.

fn overflowing_inv_lerp(self, start: Self, end: Self) -> (Self, bool)

Overflowing inverse linear interpolation between start and end.

fn get_signed(&self) -> Option<&Self::Signed>

Returns a reference to self as FixedSigned if the type is signed, or None if it is unsigned.

fn get_unsigned(&self) -> Option<&Self::Unsigned>

Returns a reference to self as FixedUnsigned if the type is unsigned, or None if it is signed.

fn get_signed_mut(&mut self) -> Option<&mut Self::Signed>

Returns a mutable reference to self as FixedSigned if the type is signed, or None if it is unsigned.

fn get_unsigned_mut(&mut self) -> Option<&mut Self::Unsigned>

Returns a mutable reference to self as FixedUnsigned if the type is unsigned, or None if it is signed.

impl<Frac: LeEqU32> FixedSigned for FixedI32<Frac>

const TRY_NEG_ONE: Option<Self> = Self::TRY_NEG_ONE

Negative one if the fixed-point number can represent it, otherwise None.

fn signed_bits(self) -> u32

Returns the number of bits required to represent the value.

fn is_positive(self) -> bool

Returns true if the number is > 0.

fn is_negative(self) -> bool

Returns true if the number is < 0.

fn abs(self) -> Self

Returns the absolute value.

fn unsigned_abs(self) -> Self::Unsigned

Returns the absolute value using an unsigned type without any wrapping or panicking.

fn unsigned_dist(self, other: Self) -> Self::Unsigned

Returns the distance from self to other using an unsigned type without any wrapping or panicking.

fn signum(self) -> Self

Returns a number representing the sign of self.

fn add_unsigned(self, rhs: Self::Unsigned) -> Self

Addition with an unsigned fixed-point number.

fn sub_unsigned(self, rhs: Self::Unsigned) -> Self

Subtraction with an unsigned fixed-point number.

fn checked_abs(self) -> Option<Self>

Checked absolute value. Returns the absolute value, or None on overflow.

fn checked_signum(self) -> Option<Self>

Checked signum. Returns a number representing the sign of self, or None on overflow.

fn checked_add_unsigned(self, rhs: Self::Unsigned) -> Option<Self>

Checked addition with an unsigned fixed-point number. Returns the sum, or None on overflow.

fn checked_sub_unsigned(self, rhs: Self::Unsigned) -> Option<Self>

Checked subtraction with an unsigned fixed-point number. Returns the difference, or None on overflow.

fn saturating_abs(self) -> Self

Saturating absolute value. Returns the absolute value, saturating on overflow.

fn saturating_signum(self) -> Self

Saturating signum. Returns a number representing the sign of self, saturating on overflow.

fn saturating_add_unsigned(self, rhs: Self::Unsigned) -> Self

Saturating addition with an unsigned fixed-point number. Returns the sum, saturating on overflow.

fn saturating_sub_unsigned(self, rhs: Self::Unsigned) -> Self

Saturating subtraction with an unsigned fixed-point number. Returns the difference, saturating on overflow.

fn wrapping_abs(self) -> Self

Wrapping absolute value. Returns the absolute value, wrapping on overflow.

fn wrapping_signum(self) -> Self

Wrapping signum. Returns a number representing the sign of self, wrapping on overflow.

fn wrapping_add_unsigned(self, rhs: Self::Unsigned) -> Self

Wrapping addition with an unsigned fixed-point number. Returns the sum, wrapping on overflow.

fn wrapping_sub_unsigned(self, rhs: Self::Unsigned) -> Self

Wrapping subtraction with an unsigned fixed-point number. Returns the difference, wrapping on overflow.

fn unwrapped_abs(self) -> Self

Unwrapped absolute value. Returns the absolute value, panicking on overflow.

fn unwrapped_signum(self) -> Self

Unwrapped signum. Returns a number representing the sign of self, panicking on overflow.

fn unwrapped_add_unsigned(self, rhs: Self::Unsigned) -> Self

Unwrapped addition with an unsigned fixed-point number. Returns the sum, panicking on overflow.

fn unwrapped_sub_unsigned(self, rhs: Self::Unsigned) -> Self

Unwrapped subtraction with an unsigned fixed-point number. Returns the difference, panicking on overflow.

fn overflowing_abs(self) -> (Self, bool)

Overflowing absolute value.

fn overflowing_signum(self) -> (Self, bool)

Overflowing signum.

fn overflowing_add_unsigned(self, rhs: Self::Unsigned) -> (Self, bool)

Overflowing addition with an unsigned fixed-point number.

fn overflowing_sub_unsigned(self, rhs: Self::Unsigned) -> (Self, bool)

Overflowing subtraction with an unsigned fixed-point number.

impl<Frac: LeEqU32> FloatConst for FixedI32<Frac>

fn E() -> Self

Return Euler’s number.

fn FRAC_1_PI() -> Self

Return 1.0 / π.

fn FRAC_1_SQRT_2() -> Self

Return 1.0 / sqrt(2.0).

fn FRAC_2_PI() -> Self

Return 2.0 / π.

fn FRAC_2_SQRT_PI() -> Self

Return 2.0 / sqrt(π).

fn FRAC_PI_2() -> Self

Return π / 2.0.

fn FRAC_PI_3() -> Self

Return π / 3.0.

fn FRAC_PI_4() -> Self

Return π / 4.0.

fn FRAC_PI_6() -> Self

Return π / 6.0.

fn FRAC_PI_8() -> Self

Return π / 8.0.

fn LN_10() -> Self

Return ln(10.0).

fn LN_2() -> Self

Return ln(2.0).

fn LOG10_E() -> Self

Return log10(e).

fn LOG2_E() -> Self

Return log2(e).

fn PI() -> Self

Return Archimedes’ constant π.

fn SQRT_2() -> Self

Return sqrt(2.0).

fn TAU() -> Self

Return the full circle constant τ.

fn LOG10_2() -> Self

Return log10(2.0).

fn LOG2_10() -> Self

Return log2(10.0).

impl<FracSrc, FracDst: LeEqU32> From<FixedI16<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU16, U16: Sub<FracSrc>, U32: Sub<FracDst>, Diff<U16, FracSrc>: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn from(src: FixedI16<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) and does not lose any precision (lossless).

impl<Frac: LeEqU32> From<FixedI32<Frac>> for F128

fn from(src: FixedI32<Frac>) -> F128

Converts a fixed-point number to a floating-point number.

This conversion never fails (infallible) and does not lose any precision (lossless).

impl<Frac: LeEqU32> From<FixedI32<Frac>> for F128Bits

fn from(src: FixedI32<Frac>) -> F128Bits

Converts a fixed-point number to a floating-point number.

This conversion never fails (infallible) and does not lose any precision (lossless).

impl<Frac: LeEqU32> From<FixedI32<Frac>> for f64

fn from(src: FixedI32<Frac>) -> f64

Converts a fixed-point number to a floating-point number.

This conversion never fails (infallible) and does not lose any precision (lossless).

impl<FracSrc, FracDst: LeEqU128> From<FixedI32<FracSrc>> for FixedI128<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32, U32: Sub<FracSrc>, U128: Sub<FracDst>, Diff<U32, FracSrc>: IsLessOrEqual<Diff<U128, FracDst>, Output = True>,

fn from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) and does not lose any precision (lossless).

impl<FracSrc, FracDst: LeEqU64> From<FixedI32<FracSrc>> for FixedI64<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32, U32: Sub<FracSrc>, U64: Sub<FracDst>, Diff<U32, FracSrc>: IsLessOrEqual<Diff<U64, FracDst>, Output = True>,

fn from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) and does not lose any precision (lossless).

impl From<FixedI32<UTerm>> for i128

fn from(src: FixedI32<U0>) -> Self

Converts a fixed-point number with no fractional bits to an integer.

This conversion never fails (infallible) and cannot lose any fractional bits (lossless).

impl From<FixedI32<UTerm>> for i32

fn from(src: FixedI32<U0>) -> Self

Converts a fixed-point number with no fractional bits to an integer.

This conversion never fails (infallible) and cannot lose any fractional bits (lossless).

impl From<FixedI32<UTerm>> for i64

fn from(src: FixedI32<U0>) -> Self

Converts a fixed-point number with no fractional bits to an integer.

This conversion never fails (infallible) and cannot lose any fractional bits (lossless).

impl<FracSrc, FracDst: LeEqU32> From<FixedI8<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU8, U8: Sub<FracSrc>, U32: Sub<FracDst>, Diff<U8, FracSrc>: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn from(src: FixedI8<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) and does not lose any precision (lossless).

impl<FracSrc, FracDst: LeEqU32> From<FixedU16<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU16, U16: Sub<FracSrc>, U31: Sub<FracDst>, Diff<U16, FracSrc>: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn from(src: FixedU16<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) and does not lose any precision (lossless).

impl<FracSrc, FracDst: LeEqU32> From<FixedU8<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU8, U8: Sub<FracSrc>, U31: Sub<FracDst>, Diff<U8, FracSrc>: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn from(src: FixedU8<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) and does not lose any precision (lossless).

impl<FracDst: LeEqU32> From<bool> for FixedI32<FracDst>

where U31: Sub<FracDst>, U1: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn from(src: bool) -> Self

Converts a bool to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits (lossless).

impl<FracDst: LeEqU32> From<i16> for FixedI32<FracDst>

where U32: Sub<FracDst>, U16: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn from(src: i16) -> Self

Converts an integer to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits, so it is actually lossless.

impl From<i32> for FixedI32<U0>

fn from(src: i32) -> Self

Converts an integer to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits (lossless).

impl<FracDst: LeEqU32> From<i8> for FixedI32<FracDst>

where U32: Sub<FracDst>, U8: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn from(src: i8) -> Self

Converts an integer to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits, so it is actually lossless.

impl<FracDst: LeEqU32> From<u16> for FixedI32<FracDst>

where U31: Sub<FracDst>, U16: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn from(src: u16) -> Self

Converts an integer to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits, so it is actually lossless.

impl<FracDst: LeEqU32> From<u8> for FixedI32<FracDst>

where U31: Sub<FracDst>, U8: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn from(src: u8) -> Self

Converts an integer to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits, so it is actually lossless.

impl<Frac: LeEqU32> FromFixed for FixedI32<Frac>

fn from_fixed<F: Fixed>(src: F) -> Self

Converts a fixed-point number.

Any extra fractional bits are discarded, which rounds towards −∞.

Panics

When debug assertions are enabled, panics if the value does not fit. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_from_fixed instead.

fn checked_from_fixed<F: Fixed>(src: F) -> Option<Self>

Converts a fixed-point number if it fits, otherwise returns None.

Any extra fractional bits are discarded, which rounds towards −∞.

fn saturating_from_fixed<F: Fixed>(src: F) -> Self

Converts a fixed-point number, saturating if it does not fit.

Any extra fractional bits are discarded, which rounds towards −∞.

fn wrapping_from_fixed<F: Fixed>(src: F) -> Self

Converts a fixed-point number, wrapping if it does not fit.

Any extra fractional bits are discarded, which rounds towards −∞.

fn overflowing_from_fixed<F: Fixed>(src: F) -> (Self, bool)

Converts a fixed-point number.

Returns a tuple of the value and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Any extra fractional bits are discarded, which rounds towards −∞.

fn unwrapped_from_fixed<F: Fixed>(src: F) -> Self

Converts a fixed-point number, panicking if it does not fit.

Any extra fractional bits are discarded, which rounds towards −∞.

Panics

Panics if the value does not fit, even when debug assertions are not enabled.

impl<Frac: LeEqU32> FromPrimitive for FixedI32<Frac>

fn from_i64(n: i64) -> Option<Self>

Converts an i64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u64(n: u64) -> Option<Self>

Converts an u64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_isize(n: isize) -> Option<Self>

Converts an isize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i8(n: i8) -> Option<Self>

Converts an i8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i16(n: i16) -> Option<Self>

Converts an i16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i32(n: i32) -> Option<Self>

Converts an i32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i128(n: i128) -> Option<Self>

Converts an i128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_usize(n: usize) -> Option<Self>

Converts a usize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u8(n: u8) -> Option<Self>

Converts an u8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u16(n: u16) -> Option<Self>

Converts an u16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u32(n: u32) -> Option<Self>

Converts an u32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u128(n: u128) -> Option<Self>

Converts an u128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f32(n: f32) -> Option<Self>

Converts a f32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f64(n: f64) -> Option<Self>

Converts a f64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

impl<Frac: LeEqU32> FromStr for FixedI32<Frac>

fn from_str(s: &str) -> Result<Self, Self::Err>

Parses a string slice to return a fixed-point number.

Rounding is to the nearest, with ties rounded to even.

type Err = ParseFixedError

The associated error which can be returned from parsing.

impl<Frac> Hash for FixedI32<Frac>

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<Frac: LeEqU32> Inv for FixedI32<Frac>

type Output = FixedI32<Frac>

The result after applying the operator.

fn inv(self) -> Self::Output

Returns the multiplicative inverse of self.

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedI128<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU128,

fn lossless_try_from(src: FixedI128<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedI16<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU16,

fn lossless_try_from(src: FixedI16<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<FixedI32<Frac>> for F128

fn lossless_try_from(src: FixedI32<Frac>) -> Option<F128>

Converts a fixed-point number to a floating-point number.

This conversion actually never fails (infallible) but does not lose any precision (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<FixedI32<Frac>> for F128Bits

fn lossless_try_from(src: FixedI32<Frac>) -> Option<F128Bits>

Converts a fixed-point number to a floating-point number.

This conversion actually never fails (infallible) but does not lose any precision (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<FixedI32<Frac>> for f64

fn lossless_try_from(src: FixedI32<Frac>) -> Option<f64>

Converts a fixed-point number to a floating-point number.

This conversion actually never fails (infallible) but does not lose any precision (lossless).

impl<FracSrc, FracDst: LeEqU128> LosslessTryFrom<FixedI32<FracSrc>> for FixedI128<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedI32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU16> LosslessTryFrom<FixedI32<FracSrc>> for FixedI16<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedI32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedI32<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedI32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU64> LosslessTryFrom<FixedI32<FracSrc>> for FixedI64<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedI32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU8> LosslessTryFrom<FixedI32<FracSrc>> for FixedI8<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedI32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU128> LosslessTryFrom<FixedI32<FracSrc>> for FixedU128<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedI32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU16> LosslessTryFrom<FixedI32<FracSrc>> for FixedU16<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedI32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedI32<FracSrc>> for FixedU32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedI32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU64> LosslessTryFrom<FixedI32<FracSrc>> for FixedU64<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedI32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU8> LosslessTryFrom<FixedI32<FracSrc>> for FixedU8<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedI32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for i128

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for i16

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for i32

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for i64

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for i8

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for isize

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for u128

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for u16

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for u32

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for u64

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for u8

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl LosslessTryFrom<FixedI32<UTerm>> for usize

fn lossless_try_from(src: FixedI32<U0>) -> Option<Self>

Converts a fixed-point number to an integer.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedI64<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU64,

fn lossless_try_from(src: FixedI64<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedI8<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU8,

fn lossless_try_from(src: FixedI8<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedU128<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU128,

fn lossless_try_from(src: FixedU128<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedU16<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU16,

fn lossless_try_from(src: FixedU16<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedU32<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU32,

fn lossless_try_from(src: FixedU32<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedU64<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU64,

fn lossless_try_from(src: FixedU64<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<FracSrc, FracDst: LeEqU32> LosslessTryFrom<FixedU8<FracSrc>> for FixedI32<FracDst>

where FracSrc: IsLessOrEqual<FracDst, Output = True> + LeEqU8,

fn lossless_try_from(src: FixedU8<FracSrc>) -> Option<Self>

Converts a fixed-pint number.

This conversion may fail (fallible) but does not lose precision (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<bool> for FixedI32<Frac>

fn lossless_try_from(src: bool) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<f16> for FixedI32<Frac>

where U24: IsLessOrEqual<Frac, Output = True>,

fn lossless_try_from(src: f16) -> Option<Self>

Converts a floating-point number to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<i128> for FixedI32<Frac>

fn lossless_try_from(src: i128) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<i16> for FixedI32<Frac>

fn lossless_try_from(src: i16) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<i32> for FixedI32<Frac>

fn lossless_try_from(src: i32) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<i64> for FixedI32<Frac>

fn lossless_try_from(src: i64) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<i8> for FixedI32<Frac>

fn lossless_try_from(src: i8) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<isize> for FixedI32<Frac>

fn lossless_try_from(src: isize) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<u128> for FixedI32<Frac>

fn lossless_try_from(src: u128) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<u16> for FixedI32<Frac>

fn lossless_try_from(src: u16) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<u32> for FixedI32<Frac>

fn lossless_try_from(src: u32) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<u64> for FixedI32<Frac>

fn lossless_try_from(src: u64) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<u8> for FixedI32<Frac>

fn lossless_try_from(src: u8) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<Frac: LeEqU32> LosslessTryFrom<usize> for FixedI32<Frac>

fn lossless_try_from(src: usize) -> Option<Self>

Converts an integer to a fixed-point number.

This conversion may fail (fallible) but cannot lose any fractional bits (lossless).

impl<FracSrc: LeEqU128, FracDst: LeEqU32> LossyFrom<FixedI128<FracSrc>> for FixedI32<FracDst>

where U128: Sub<FracSrc>, U32: Sub<FracDst>, Diff<U128, FracSrc>: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn lossy_from(src: FixedI128<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> LossyFrom<FixedI16<FracSrc>> for FixedI32<FracDst>

where U16: Sub<FracSrc>, U32: Sub<FracDst>, Diff<U16, FracSrc>: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn lossy_from(src: FixedI16<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<Frac: LeEqU32> LossyFrom<FixedI32<Frac>> for F128

fn lossy_from(src: FixedI32<Frac>) -> F128

Converts a fixed-point number to a floating-point number.

This conversion never fails (infallible) but may lose precision (lossy). Rounding is to the nearest, with ties rounded to even.

impl<Frac: LeEqU32> LossyFrom<FixedI32<Frac>> for F128Bits

fn lossy_from(src: FixedI32<Frac>) -> F128Bits

Converts a fixed-point number to a floating-point number.

This conversion never fails (infallible) but may lose precision (lossy). Rounding is to the nearest, with ties rounded to even.

impl<Frac: LeEqU32> LossyFrom<FixedI32<Frac>> for bf16

fn lossy_from(src: FixedI32<Frac>) -> bf16

Converts a fixed-point number to a floating-point number.

This conversion never fails (infallible) but may lose precision (lossy). Rounding is to the nearest, with ties rounded to even.

impl<Frac: LeEqU32> LossyFrom<FixedI32<Frac>> for f16

fn lossy_from(src: FixedI32<Frac>) -> f16

Converts a fixed-point number to a floating-point number.

This conversion never fails (infallible) but may lose precision (lossy). Rounding is to the nearest, with ties rounded to even.

impl<Frac: LeEqU32> LossyFrom<FixedI32<Frac>> for f32

fn lossy_from(src: FixedI32<Frac>) -> f32

Converts a fixed-point number to a floating-point number.

This conversion never fails (infallible) but may lose precision (lossy). Rounding is to the nearest, with ties rounded to even.

impl<Frac: LeEqU32> LossyFrom<FixedI32<Frac>> for f64

fn lossy_from(src: FixedI32<Frac>) -> f64

Converts a fixed-point number to a floating-point number.

This conversion never fails (infallible) but may lose precision (lossy). Rounding is to the nearest, with ties rounded to even.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> LossyFrom<FixedI32<FracSrc>> for FixedI128<FracDst>

where U32: Sub<FracSrc>, U128: Sub<FracDst>, Diff<U32, FracSrc>: IsLessOrEqual<Diff<U128, FracDst>, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> LossyFrom<FixedI32<FracSrc>> for FixedI16<FracDst>

where U32: Sub<FracSrc>, U16: Sub<FracDst>, Diff<U32, FracSrc>: IsLessOrEqual<Diff<U16, FracDst>, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> LossyFrom<FixedI32<FracSrc>> for FixedI32<FracDst>

where U32: Sub<FracSrc>, U32: Sub<FracDst>, Diff<U32, FracSrc>: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> LossyFrom<FixedI32<FracSrc>> for FixedI64<FracDst>

where U32: Sub<FracSrc>, U64: Sub<FracDst>, Diff<U32, FracSrc>: IsLessOrEqual<Diff<U64, FracDst>, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> LossyFrom<FixedI32<FracSrc>> for FixedI8<FracDst>

where U32: Sub<FracSrc>, U8: Sub<FracDst>, Diff<U32, FracSrc>: IsLessOrEqual<Diff<U8, FracDst>, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32> LossyFrom<FixedI32<FracSrc>> for i128

where U32: Sub<FracSrc>, Diff<U32, FracSrc>: IsLessOrEqual<U128, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-point number to an integer.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32> LossyFrom<FixedI32<FracSrc>> for i16

where U32: Sub<FracSrc>, Diff<U32, FracSrc>: IsLessOrEqual<U16, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-point number to an integer.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32> LossyFrom<FixedI32<FracSrc>> for i32

where U32: Sub<FracSrc>, Diff<U32, FracSrc>: IsLessOrEqual<U32, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-point number to an integer.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32> LossyFrom<FixedI32<FracSrc>> for i64

where U32: Sub<FracSrc>, Diff<U32, FracSrc>: IsLessOrEqual<U64, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-point number to an integer.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32> LossyFrom<FixedI32<FracSrc>> for i8

where U32: Sub<FracSrc>, Diff<U32, FracSrc>: IsLessOrEqual<U8, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-point number to an integer.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32> LossyFrom<FixedI32<FracSrc>> for isize

where U32: Sub<FracSrc>, Diff<U32, FracSrc>: IsLessOrEqual<U16, Output = True>,

fn lossy_from(src: FixedI32<FracSrc>) -> Self

Converts a fixed-point number to an integer.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> LossyFrom<FixedI64<FracSrc>> for FixedI32<FracDst>

where U64: Sub<FracSrc>, U32: Sub<FracDst>, Diff<U64, FracSrc>: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn lossy_from(src: FixedI64<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> LossyFrom<FixedI8<FracSrc>> for FixedI32<FracDst>

where U8: Sub<FracSrc>, U32: Sub<FracDst>, Diff<U8, FracSrc>: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn lossy_from(src: FixedI8<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> LossyFrom<FixedU128<FracSrc>> for FixedI32<FracDst>

where U128: Sub<FracSrc>, U31: Sub<FracDst>, Diff<U128, FracSrc>: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn lossy_from(src: FixedU128<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> LossyFrom<FixedU16<FracSrc>> for FixedI32<FracDst>

where U16: Sub<FracSrc>, U31: Sub<FracDst>, Diff<U16, FracSrc>: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn lossy_from(src: FixedU16<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> LossyFrom<FixedU32<FracSrc>> for FixedI32<FracDst>

where U32: Sub<FracSrc>, U31: Sub<FracDst>, Diff<U32, FracSrc>: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn lossy_from(src: FixedU32<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> LossyFrom<FixedU64<FracSrc>> for FixedI32<FracDst>

where U64: Sub<FracSrc>, U31: Sub<FracDst>, Diff<U64, FracSrc>: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn lossy_from(src: FixedU64<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> LossyFrom<FixedU8<FracSrc>> for FixedI32<FracDst>

where U8: Sub<FracSrc>, U31: Sub<FracDst>, Diff<U8, FracSrc>: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn lossy_from(src: FixedU8<FracSrc>) -> Self

Converts a fixed-pint number.

This conversion never fails (infallible) but may lose precision (lossy). Any fractional bits in the source that cannot be represented in the destination are discarded, which rounds towards −∞.

impl<FracDst: LeEqU32> LossyFrom<bool> for FixedI32<FracDst>

where U31: Sub<FracDst>, U1: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn lossy_from(src: bool) -> Self

Converts a bool to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits, so it is actually lossless.

impl<FracDst: LeEqU32> LossyFrom<i16> for FixedI32<FracDst>

where U32: Sub<FracDst>, U16: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn lossy_from(src: i16) -> Self

Converts an integer to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits, so it is actually lossless.

impl LossyFrom<i32> for FixedI32<U0>

fn lossy_from(src: i32) -> Self

Converts an integer to a fixed-point number.

This conversion never fails (infallible) and actually does not lose any precision (lossless).

impl<FracDst: LeEqU32> LossyFrom<i8> for FixedI32<FracDst>

where U32: Sub<FracDst>, U8: IsLessOrEqual<Diff<U32, FracDst>, Output = True>,

fn lossy_from(src: i8) -> Self

Converts an integer to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits, so it is actually lossless.

impl<FracDst: LeEqU32> LossyFrom<u16> for FixedI32<FracDst>

where U31: Sub<FracDst>, U16: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn lossy_from(src: u16) -> Self

Converts an integer to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits, so it is actually lossless.

impl<FracDst: LeEqU32> LossyFrom<u8> for FixedI32<FracDst>

where U31: Sub<FracDst>, U8: IsLessOrEqual<Diff<U31, FracDst>, Output = True>,

fn lossy_from(src: u8) -> Self

Converts an integer to a fixed-point number.

This conversion never fails (infallible) and cannot lose any fractional bits, so it is actually lossless.

impl<Frac: LeEqU32> LowerExp for FixedI32<Frac>

fn fmt(&self, f: &mut Formatter<'_>) -> FmtResult

Formats the value using the given formatter.

impl<Frac: LeEqU32> LowerHex for FixedI32<Frac>

fn fmt(&self, f: &mut Formatter<'_>) -> FmtResult

Formats the value using the given formatter.

impl<Frac: LeEqU32> Mul<&FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the * operation.

impl<Frac: LeEqU32> Mul<&FixedI32<Frac>> for &i32

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the * operation.

impl<Frac: LeEqU32> Mul<&FixedI32<Frac>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the * operation.

impl<Frac: LeEqU32> Mul<&FixedI32<Frac>> for i32

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the * operation.

impl<Frac: LeEqU32> Mul<&i32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: &i32) -> FixedI32<Frac>

Performs the * operation.

impl<Frac: LeEqU32> Mul<&i32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: &i32) -> FixedI32<Frac>

Performs the * operation.

impl<Frac: LeEqU32> Mul<FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the * operation.

impl<Frac: LeEqU32> Mul<FixedI32<Frac>> for &i32

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the * operation.

impl<Frac: LeEqU32> Mul<FixedI32<Frac>> for i32

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the * operation.

impl<Frac: LeEqU32> Mul<i32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: i32) -> FixedI32<Frac>

Performs the * operation.

impl<Frac> Mul<i32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: i32) -> FixedI32<Frac>

Performs the * operation.

impl<Frac: LeEqU32> Mul for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the * operator.

fn mul(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the * operation.

impl<Frac, MulFrac: LeEqU32> MulAdd<FixedI32<MulFrac>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the fused multiply-add.

fn mul_add(self, a: FixedI32<MulFrac>, b: FixedI32<Frac>) -> FixedI32<Frac>

Performs the fused multiply-add operation (self * a) + b

impl<Frac, MulFrac: LeEqU32> MulAddAssign<FixedI32<MulFrac>> for FixedI32<Frac>

fn mul_add_assign(&mut self, a: FixedI32<MulFrac>, b: FixedI32<Frac>)

Performs the fused multiply-add assignment operation *self = (*self * a) + b

impl<Frac, RhsFrac: LeEqU32> MulAssign<&FixedI32<RhsFrac>> for FixedI32<Frac>

fn mul_assign(&mut self, rhs: &FixedI32<RhsFrac>)

Performs the *= operation.

impl<Frac: LeEqU32> MulAssign<&i32> for FixedI32<Frac>

fn mul_assign(&mut self, rhs: &i32)

Performs the *= operation.

impl<Frac, RhsFrac: LeEqU32> MulAssign<FixedI32<RhsFrac>> for FixedI32<Frac>

fn mul_assign(&mut self, rhs: FixedI32<RhsFrac>)

Performs the *= operation.

impl<Frac: LeEqU32> MulAssign<i32> for FixedI32<Frac>

fn mul_assign(&mut self, rhs: i32)

Performs the *= operation.

impl<Frac> Neg for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the - operator.

fn neg(self) -> FixedI32<Frac>

Performs the unary - operation.

impl<Frac> Neg for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the - operator.

fn neg(self) -> FixedI32<Frac>

Performs the unary - operation.

impl<Frac> Not for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the ! operator.

fn not(self) -> FixedI32<Frac>

Performs the unary ! operation.

impl<Frac> Not for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the ! operator.

fn not(self) -> FixedI32<Frac>

Performs the unary ! operation.

impl<Frac> Num for FixedI32<Frac>

where Frac: IsLessOrEqual<U30, Output = True> + LeEqU32,

type FromStrRadixErr = RadixParseFixedError

fn from_str_radix(str: &str, radix: u32) -> Result<Self, Self::FromStrRadixErr>

Convert from a string and radix (typically 2..=36).

impl<Frac: LeEqU32> Octal for FixedI32<Frac>

fn fmt(&self, f: &mut Formatter<'_>) -> FmtResult

Formats the value using the given formatter.

impl<Frac> One for FixedI32<Frac>

where Frac: IsLessOrEqual<U30, Output = True> + LeEqU32,

fn one() -> Self

Returns the multiplicative identity element of Self, 1.

fn set_one(&mut self)

Sets self to the multiplicative identity element of Self, 1.

fn is_one(&self) -> bool

where Self: PartialEq,

Returns true if self is equal to the multiplicative identity.

impl<Frac: Unsigned> Ord for FixedI32<Frac>

fn cmp(&self, rhs: &FixedI32<Frac>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl<Frac> OverflowingAdd for FixedI32<Frac>

fn overflowing_add(&self, v: &Self) -> (Self, bool)

Returns a tuple of the sum along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

impl<Frac: LeEqU32> OverflowingCast<F128> for FixedI32<Frac>

fn overflowing_cast(self) -> (F128, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<F128Bits> for FixedI32<Frac>

fn overflowing_cast(self) -> (F128Bits, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> OverflowingCast<FixedI128<FracDst>> for FixedI32<FracSrc>

fn overflowing_cast(self) -> (FixedI128<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> OverflowingCast<FixedI16<FracDst>> for FixedI32<FracSrc>

fn overflowing_cast(self) -> (FixedI16<FracDst>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for F128

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for F128Bits

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for bf16

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for bool

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for f16

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for f32

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for f64

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for i128

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for i16

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for i32

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for i64

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for i8

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for isize

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for u128

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for u16

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for u32

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for u64

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for u8

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<FixedI32<Frac>> for usize

fn overflowing_cast(self) -> (FixedI32<Frac>, bool)

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> OverflowingCast<FixedI32<FracDst>> for FixedI128<FracSrc>

fn overflowing_cast(self) -> (FixedI32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> OverflowingCast<FixedI32<FracDst>> for FixedI16<FracSrc>

fn overflowing_cast(self) -> (FixedI32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> OverflowingCast<FixedI32<FracDst>> for FixedI32<FracSrc>

fn overflowing_cast(self) -> (FixedI32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> OverflowingCast<FixedI32<FracDst>> for FixedI64<FracSrc>

fn overflowing_cast(self) -> (FixedI32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> OverflowingCast<FixedI32<FracDst>> for FixedI8<FracSrc>

fn overflowing_cast(self) -> (FixedI32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> OverflowingCast<FixedI32<FracDst>> for FixedU128<FracSrc>

fn overflowing_cast(self) -> (FixedI32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> OverflowingCast<FixedI32<FracDst>> for FixedU16<FracSrc>

fn overflowing_cast(self) -> (FixedI32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> OverflowingCast<FixedI32<FracDst>> for FixedU32<FracSrc>

fn overflowing_cast(self) -> (FixedI32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> OverflowingCast<FixedI32<FracDst>> for FixedU64<FracSrc>

fn overflowing_cast(self) -> (FixedI32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> OverflowingCast<FixedI32<FracDst>> for FixedU8<FracSrc>

fn overflowing_cast(self) -> (FixedI32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> OverflowingCast<FixedI64<FracDst>> for FixedI32<FracSrc>

fn overflowing_cast(self) -> (FixedI64<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> OverflowingCast<FixedI8<FracDst>> for FixedI32<FracSrc>

fn overflowing_cast(self) -> (FixedI8<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> OverflowingCast<FixedU128<FracDst>> for FixedI32<FracSrc>

fn overflowing_cast(self) -> (FixedU128<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> OverflowingCast<FixedU16<FracDst>> for FixedI32<FracSrc>

fn overflowing_cast(self) -> (FixedU16<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> OverflowingCast<FixedU32<FracDst>> for FixedI32<FracSrc>

fn overflowing_cast(self) -> (FixedU32<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> OverflowingCast<FixedU64<FracDst>> for FixedI32<FracSrc>

fn overflowing_cast(self) -> (FixedU64<FracDst>, bool)

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> OverflowingCast<FixedU8<FracDst>> for FixedI32<FracSrc>

fn overflowing_cast(self) -> (FixedU8<FracDst>, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<bf16> for FixedI32<Frac>

fn overflowing_cast(self) -> (bf16, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<f16> for FixedI32<Frac>

fn overflowing_cast(self) -> (f16, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<f32> for FixedI32<Frac>

fn overflowing_cast(self) -> (f32, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<f64> for FixedI32<Frac>

fn overflowing_cast(self) -> (f64, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<i128> for FixedI32<Frac>

fn overflowing_cast(self) -> (i128, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<i16> for FixedI32<Frac>

fn overflowing_cast(self) -> (i16, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<i32> for FixedI32<Frac>

fn overflowing_cast(self) -> (i32, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<i64> for FixedI32<Frac>

fn overflowing_cast(self) -> (i64, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<i8> for FixedI32<Frac>

fn overflowing_cast(self) -> (i8, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<isize> for FixedI32<Frac>

fn overflowing_cast(self) -> (isize, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<u128> for FixedI32<Frac>

fn overflowing_cast(self) -> (u128, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<u16> for FixedI32<Frac>

fn overflowing_cast(self) -> (u16, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<u32> for FixedI32<Frac>

fn overflowing_cast(self) -> (u32, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<u64> for FixedI32<Frac>

fn overflowing_cast(self) -> (u64, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<u8> for FixedI32<Frac>

fn overflowing_cast(self) -> (u8, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingCast<usize> for FixedI32<Frac>

fn overflowing_cast(self) -> (usize, bool)

Casts the value.

impl<Frac: LeEqU32> OverflowingMul for FixedI32<Frac>

fn overflowing_mul(&self, v: &Self) -> (Self, bool)

Returns a tuple of the product along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

impl<Frac> OverflowingSub for FixedI32<Frac>

fn overflowing_sub(&self, v: &Self) -> (Self, bool)

Returns a tuple of the difference along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

impl<Frac: Unsigned> PartialEq<F128> for FixedI32<Frac>

fn eq(&self, rhs: &F128) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<F128Bits> for FixedI32<Frac>

fn eq(&self, rhs: &F128Bits) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI128<FracRhs>> for FixedI32<FracLhs>

fn eq(&self, rhs: &FixedI128<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI16<FracRhs>> for FixedI32<FracLhs>

fn eq(&self, rhs: &FixedI16<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for F128

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for F128Bits

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for bf16

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for f16

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for f32

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for f64

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for i128

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for i16

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for i32

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for i64

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for i8

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for isize

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for u128

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for u16

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for u32

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for u64

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for u8

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<FixedI32<Frac>> for usize

fn eq(&self, rhs: &FixedI32<Frac>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI32<FracRhs>> for FixedI128<FracLhs>

fn eq(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI32<FracRhs>> for FixedI16<FracLhs>

fn eq(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI32<FracRhs>> for FixedI32<FracLhs>

fn eq(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI32<FracRhs>> for FixedI64<FracLhs>

fn eq(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI32<FracRhs>> for FixedI8<FracLhs>

fn eq(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI32<FracRhs>> for FixedU128<FracLhs>

fn eq(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI32<FracRhs>> for FixedU16<FracLhs>

fn eq(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI32<FracRhs>> for FixedU32<FracLhs>

fn eq(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI32<FracRhs>> for FixedU64<FracLhs>

fn eq(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI32<FracRhs>> for FixedU8<FracLhs>

fn eq(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI64<FracRhs>> for FixedI32<FracLhs>

fn eq(&self, rhs: &FixedI64<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedI8<FracRhs>> for FixedI32<FracLhs>

fn eq(&self, rhs: &FixedI8<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedU128<FracRhs>> for FixedI32<FracLhs>

fn eq(&self, rhs: &FixedU128<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedU16<FracRhs>> for FixedI32<FracLhs>

fn eq(&self, rhs: &FixedU16<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedU32<FracRhs>> for FixedI32<FracLhs>

fn eq(&self, rhs: &FixedU32<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedU64<FracRhs>> for FixedI32<FracLhs>

fn eq(&self, rhs: &FixedU64<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialEq<FixedU8<FracRhs>> for FixedI32<FracLhs>

fn eq(&self, rhs: &FixedU8<FracRhs>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<bf16> for FixedI32<Frac>

fn eq(&self, rhs: &bf16) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<f16> for FixedI32<Frac>

fn eq(&self, rhs: &f16) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<f32> for FixedI32<Frac>

fn eq(&self, rhs: &f32) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<f64> for FixedI32<Frac>

fn eq(&self, rhs: &f64) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<i128> for FixedI32<Frac>

fn eq(&self, rhs: &i128) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<i16> for FixedI32<Frac>

fn eq(&self, rhs: &i16) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<i32> for FixedI32<Frac>

fn eq(&self, rhs: &i32) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<i64> for FixedI32<Frac>

fn eq(&self, rhs: &i64) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<i8> for FixedI32<Frac>

fn eq(&self, rhs: &i8) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<isize> for FixedI32<Frac>

fn eq(&self, rhs: &isize) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<u128> for FixedI32<Frac>

fn eq(&self, rhs: &u128) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<u16> for FixedI32<Frac>

fn eq(&self, rhs: &u16) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<u32> for FixedI32<Frac>

fn eq(&self, rhs: &u32) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<u64> for FixedI32<Frac>

fn eq(&self, rhs: &u64) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<u8> for FixedI32<Frac>

fn eq(&self, rhs: &u8) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialEq<usize> for FixedI32<Frac>

fn eq(&self, rhs: &usize) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<Frac: Unsigned> PartialOrd<F128> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &F128) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<F128Bits> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &F128Bits) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI128<FracRhs>> for FixedI32<FracLhs>

fn partial_cmp(&self, rhs: &FixedI128<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI128<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI128<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI128<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI128<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI16<FracRhs>> for FixedI32<FracLhs>

fn partial_cmp(&self, rhs: &FixedI16<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI16<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI16<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI16<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI16<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for F128

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for F128Bits

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for bf16

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for f16

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for f32

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for f64

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for i128

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for i16

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for i32

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for i64

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for i8

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for isize

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for u128

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for u16

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for u32

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for u64

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for u8

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<FixedI32<Frac>> for usize

fn partial_cmp(&self, rhs: &FixedI32<Frac>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<Frac>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<Frac>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI32<FracRhs>> for FixedI128<FracLhs>

fn partial_cmp(&self, rhs: &FixedI32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI32<FracRhs>> for FixedI16<FracLhs>

fn partial_cmp(&self, rhs: &FixedI32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI32<FracRhs>> for FixedI32<FracLhs>

fn partial_cmp(&self, rhs: &FixedI32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI32<FracRhs>> for FixedI64<FracLhs>

fn partial_cmp(&self, rhs: &FixedI32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI32<FracRhs>> for FixedI8<FracLhs>

fn partial_cmp(&self, rhs: &FixedI32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI32<FracRhs>> for FixedU128<FracLhs>

fn partial_cmp(&self, rhs: &FixedI32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI32<FracRhs>> for FixedU16<FracLhs>

fn partial_cmp(&self, rhs: &FixedI32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI32<FracRhs>> for FixedU32<FracLhs>

fn partial_cmp(&self, rhs: &FixedI32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI32<FracRhs>> for FixedU64<FracLhs>

fn partial_cmp(&self, rhs: &FixedI32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI32<FracRhs>> for FixedU8<FracLhs>

fn partial_cmp(&self, rhs: &FixedI32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI64<FracRhs>> for FixedI32<FracLhs>

fn partial_cmp(&self, rhs: &FixedI64<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI64<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI64<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI64<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI64<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedI8<FracRhs>> for FixedI32<FracLhs>

fn partial_cmp(&self, rhs: &FixedI8<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedI8<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedI8<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedI8<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedI8<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedU128<FracRhs>> for FixedI32<FracLhs>

fn partial_cmp(&self, rhs: &FixedU128<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedU128<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedU128<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedU128<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedU128<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedU16<FracRhs>> for FixedI32<FracLhs>

fn partial_cmp(&self, rhs: &FixedU16<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedU16<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedU16<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedU16<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedU16<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedU32<FracRhs>> for FixedI32<FracLhs>

fn partial_cmp(&self, rhs: &FixedU32<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedU32<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedU32<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedU32<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedU32<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedU64<FracRhs>> for FixedI32<FracLhs>

fn partial_cmp(&self, rhs: &FixedU64<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedU64<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedU64<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedU64<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedU64<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<FracLhs: Unsigned, FracRhs: Unsigned> PartialOrd<FixedU8<FracRhs>> for FixedI32<FracLhs>

fn partial_cmp(&self, rhs: &FixedU8<FracRhs>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &FixedU8<FracRhs>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &FixedU8<FracRhs>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &FixedU8<FracRhs>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &FixedU8<FracRhs>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<bf16> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &bf16) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<f16> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &f16) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<f32> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &f32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<f64> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &f64) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<i128> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &i128) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &i128) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &i128) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &i128) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &i128) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<i16> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &i16) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &i16) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &i16) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &i16) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &i16) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<i32> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &i32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &i32) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &i32) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &i32) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &i32) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<i64> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &i64) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &i64) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &i64) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &i64) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &i64) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<i8> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &i8) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &i8) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &i8) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &i8) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &i8) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<isize> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &isize) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &isize) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &isize) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &isize) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &isize) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<u128> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &u128) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &u128) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &u128) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &u128) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &u128) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<u16> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &u16) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &u16) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &u16) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &u16) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &u16) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<u32> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &u32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &u32) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &u32) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &u32) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &u32) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<u64> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &u64) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &u64) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &u64) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &u64) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &u64) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<u8> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &u8) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &u8) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &u8) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &u8) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &u8) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<Frac: Unsigned> PartialOrd<usize> for FixedI32<Frac>

fn partial_cmp(&self, rhs: &usize) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, rhs: &usize) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, rhs: &usize) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, rhs: &usize) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, rhs: &usize) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, Frac: 'a + LeEqU32> Product<&'a FixedI32<Frac>> for FixedI32<Frac>

fn product<I>(iter: I) -> FixedI32<Frac>

where I: Iterator<Item = &'a FixedI32<Frac>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<Frac: LeEqU32> Product for FixedI32<Frac>

fn product<I>(iter: I) -> FixedI32<Frac>

where I: Iterator<Item = FixedI32<Frac>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<Frac> Rem<&FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the % operation.

impl<Frac> Rem<&FixedI32<Frac>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the % operation.

impl<Frac: LeEqU32> Rem<&NonZero<i32>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: &NonZeroI32) -> FixedI32<Frac>

Performs the % operation.

impl<Frac: LeEqU32> Rem<&NonZero<i32>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: &NonZeroI32) -> FixedI32<Frac>

Performs the % operation.

impl<Frac: LeEqU32> Rem<&i32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: &i32) -> FixedI32<Frac>

Performs the % operation.

impl<Frac: LeEqU32> Rem<&i32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: &i32) -> FixedI32<Frac>

Performs the % operation.

impl<Frac> Rem<FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the % operation.

impl<Frac: LeEqU32> Rem<NonZero<i32>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: NonZeroI32) -> FixedI32<Frac>

Performs the % operation.

impl<Frac: LeEqU32> Rem<NonZero<i32>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: NonZeroI32) -> FixedI32<Frac>

Performs the % operation.

impl<Frac: LeEqU32> Rem<i32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: i32) -> FixedI32<Frac>

Performs the % operation.

impl<Frac: LeEqU32> Rem<i32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: i32) -> FixedI32<Frac>

Performs the % operation.

impl<Frac> Rem for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the % operator.

fn rem(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the % operation.

impl<Frac> RemAssign<&FixedI32<Frac>> for FixedI32<Frac>

fn rem_assign(&mut self, rhs: &FixedI32<Frac>)

Performs the %= operation.

impl<Frac: LeEqU32> RemAssign<&NonZero<i32>> for FixedI32<Frac>

fn rem_assign(&mut self, rhs: &NonZeroI32)

Performs the %= operation.

impl<Frac: LeEqU32> RemAssign<&i32> for FixedI32<Frac>

fn rem_assign(&mut self, rhs: &i32)

Performs the %= operation.

impl<Frac: LeEqU32> RemAssign<NonZero<i32>> for FixedI32<Frac>

fn rem_assign(&mut self, rhs: NonZeroI32)

Performs the %= operation.

impl<Frac: LeEqU32> RemAssign<i32> for FixedI32<Frac>

fn rem_assign(&mut self, rhs: i32)

Performs the %= operation.

impl<Frac> RemAssign for FixedI32<Frac>

fn rem_assign(&mut self, rhs: FixedI32<Frac>)

Performs the %= operation.

impl<Frac> SaturatingAdd for FixedI32<Frac>

fn saturating_add(&self, v: &Self) -> Self

Saturating addition. Computes self + other, saturating at the relevant high or low boundary of the type.

impl<Frac: LeEqU32> SaturatingCast<F128> for FixedI32<Frac>

fn saturating_cast(self) -> F128

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<F128Bits> for FixedI32<Frac>

fn saturating_cast(self) -> F128Bits

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> SaturatingCast<FixedI128<FracDst>> for FixedI32<FracSrc>

fn saturating_cast(self) -> FixedI128<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> SaturatingCast<FixedI16<FracDst>> for FixedI32<FracSrc>

fn saturating_cast(self) -> FixedI16<FracDst>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for F128

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for F128Bits

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for bf16

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for bool

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for f16

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for f32

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for f64

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for i128

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for i16

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for i32

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for i64

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for i8

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for isize

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for u128

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for u16

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for u32

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for u64

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for u8

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<FixedI32<Frac>> for usize

fn saturating_cast(self) -> FixedI32<Frac>

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> SaturatingCast<FixedI32<FracDst>> for FixedI128<FracSrc>

fn saturating_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> SaturatingCast<FixedI32<FracDst>> for FixedI16<FracSrc>

fn saturating_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> SaturatingCast<FixedI32<FracDst>> for FixedI32<FracSrc>

fn saturating_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> SaturatingCast<FixedI32<FracDst>> for FixedI64<FracSrc>

fn saturating_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> SaturatingCast<FixedI32<FracDst>> for FixedI8<FracSrc>

fn saturating_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> SaturatingCast<FixedI32<FracDst>> for FixedU128<FracSrc>

fn saturating_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> SaturatingCast<FixedI32<FracDst>> for FixedU16<FracSrc>

fn saturating_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> SaturatingCast<FixedI32<FracDst>> for FixedU32<FracSrc>

fn saturating_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> SaturatingCast<FixedI32<FracDst>> for FixedU64<FracSrc>

fn saturating_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> SaturatingCast<FixedI32<FracDst>> for FixedU8<FracSrc>

fn saturating_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> SaturatingCast<FixedI64<FracDst>> for FixedI32<FracSrc>

fn saturating_cast(self) -> FixedI64<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> SaturatingCast<FixedI8<FracDst>> for FixedI32<FracSrc>

fn saturating_cast(self) -> FixedI8<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> SaturatingCast<FixedU128<FracDst>> for FixedI32<FracSrc>

fn saturating_cast(self) -> FixedU128<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> SaturatingCast<FixedU16<FracDst>> for FixedI32<FracSrc>

fn saturating_cast(self) -> FixedU16<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> SaturatingCast<FixedU32<FracDst>> for FixedI32<FracSrc>

fn saturating_cast(self) -> FixedU32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> SaturatingCast<FixedU64<FracDst>> for FixedI32<FracSrc>

fn saturating_cast(self) -> FixedU64<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> SaturatingCast<FixedU8<FracDst>> for FixedI32<FracSrc>

fn saturating_cast(self) -> FixedU8<FracDst>

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<bf16> for FixedI32<Frac>

fn saturating_cast(self) -> bf16

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<f16> for FixedI32<Frac>

fn saturating_cast(self) -> f16

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<f32> for FixedI32<Frac>

fn saturating_cast(self) -> f32

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<f64> for FixedI32<Frac>

fn saturating_cast(self) -> f64

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<i128> for FixedI32<Frac>

fn saturating_cast(self) -> i128

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<i16> for FixedI32<Frac>

fn saturating_cast(self) -> i16

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<i32> for FixedI32<Frac>

fn saturating_cast(self) -> i32

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<i64> for FixedI32<Frac>

fn saturating_cast(self) -> i64

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<i8> for FixedI32<Frac>

fn saturating_cast(self) -> i8

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<isize> for FixedI32<Frac>

fn saturating_cast(self) -> isize

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<u128> for FixedI32<Frac>

fn saturating_cast(self) -> u128

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<u16> for FixedI32<Frac>

fn saturating_cast(self) -> u16

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<u32> for FixedI32<Frac>

fn saturating_cast(self) -> u32

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<u64> for FixedI32<Frac>

fn saturating_cast(self) -> u64

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<u8> for FixedI32<Frac>

fn saturating_cast(self) -> u8

Casts the value.

impl<Frac: LeEqU32> SaturatingCast<usize> for FixedI32<Frac>

fn saturating_cast(self) -> usize

Casts the value.

impl<Frac: LeEqU32> SaturatingMul for FixedI32<Frac>

fn saturating_mul(&self, v: &Self) -> Self

Saturating multiplication. Computes self * other, saturating at the relevant high or low boundary of the type.

impl<Frac> SaturatingSub for FixedI32<Frac>

fn saturating_sub(&self, v: &Self) -> Self

Saturating subtraction. Computes self - other, saturating at the relevant high or low boundary of the type.

impl<Frac: LeEqU32> Serialize for FixedI32<Frac>

fn serialize<S: Serializer>(&self, serializer: S) -> Result<S::Ok, S::Error>

Serialize this value into the given Serde serializer.

impl<Frac> Shl<&i128> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &i128) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&i128> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &i128) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&i16> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &i16) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&i16> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &i16) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&i32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &i32) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&i32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &i32) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&i64> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &i64) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&i64> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &i64) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&i8> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &i8) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&i8> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &i8) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&isize> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &isize) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&isize> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &isize) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&u128> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &u128) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&u128> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &u128) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&u16> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &u16) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&u16> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &u16) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&u32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &u32) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&u32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &u32) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&u64> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &u64) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&u64> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &u64) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&u8> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &u8) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&u8> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &u8) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&usize> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &usize) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<&usize> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: &usize) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<i128> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: i128) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<i128> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: i128) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<i16> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: i16) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<i16> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: i16) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<i32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: i32) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<i32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: i32) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<i64> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: i64) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<i64> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: i64) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<i8> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: i8) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<i8> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: i8) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<isize> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: isize) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<isize> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: isize) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<u128> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: u128) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<u128> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: u128) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<u16> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: u16) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<u16> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: u16) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<u32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: u32) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<u32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: u32) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<u64> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: u64) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<u64> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: u64) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<u8> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: u8) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<u8> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: u8) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<usize> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: usize) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> Shl<usize> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the << operator.

fn shl(self, rhs: usize) -> FixedI32<Frac>

Performs the << operation.

impl<Frac> ShlAssign<&i128> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &i128)

Performs the <<= operation.

impl<Frac> ShlAssign<&i16> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &i16)

Performs the <<= operation.

impl<Frac> ShlAssign<&i32> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &i32)

Performs the <<= operation.

impl<Frac> ShlAssign<&i64> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &i64)

Performs the <<= operation.

impl<Frac> ShlAssign<&i8> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &i8)

Performs the <<= operation.

impl<Frac> ShlAssign<&isize> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &isize)

Performs the <<= operation.

impl<Frac> ShlAssign<&u128> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &u128)

Performs the <<= operation.

impl<Frac> ShlAssign<&u16> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &u16)

Performs the <<= operation.

impl<Frac> ShlAssign<&u32> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &u32)

Performs the <<= operation.

impl<Frac> ShlAssign<&u64> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &u64)

Performs the <<= operation.

impl<Frac> ShlAssign<&u8> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &u8)

Performs the <<= operation.

impl<Frac> ShlAssign<&usize> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: &usize)

Performs the <<= operation.

impl<Frac> ShlAssign<i128> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: i128)

Performs the <<= operation.

impl<Frac> ShlAssign<i16> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: i16)

Performs the <<= operation.

impl<Frac> ShlAssign<i32> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: i32)

Performs the <<= operation.

impl<Frac> ShlAssign<i64> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: i64)

Performs the <<= operation.

impl<Frac> ShlAssign<i8> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: i8)

Performs the <<= operation.

impl<Frac> ShlAssign<isize> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: isize)

Performs the <<= operation.

impl<Frac> ShlAssign<u128> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: u128)

Performs the <<= operation.

impl<Frac> ShlAssign<u16> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: u16)

Performs the <<= operation.

impl<Frac> ShlAssign<u32> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: u32)

Performs the <<= operation.

impl<Frac> ShlAssign<u64> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: u64)

Performs the <<= operation.

impl<Frac> ShlAssign<u8> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: u8)

Performs the <<= operation.

impl<Frac> ShlAssign<usize> for FixedI32<Frac>

fn shl_assign(&mut self, rhs: usize)

Performs the <<= operation.

impl<Frac> Shr<&i128> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &i128) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&i128> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &i128) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&i16> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &i16) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&i16> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &i16) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&i32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &i32) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&i32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &i32) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&i64> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &i64) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&i64> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &i64) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&i8> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &i8) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&i8> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &i8) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&isize> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &isize) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&isize> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &isize) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&u128> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u128) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&u128> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u128) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&u16> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u16) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&u16> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u16) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&u32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u32) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&u32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u32) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&u64> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u64) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&u64> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u64) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&u8> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u8) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&u8> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u8) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&usize> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &usize) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<&usize> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: &usize) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<i128> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: i128) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<i128> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: i128) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<i16> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: i16) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<i16> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: i16) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<i32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: i32) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<i32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: i32) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<i64> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: i64) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<i64> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: i64) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<i8> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: i8) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<i8> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: i8) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<isize> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: isize) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<isize> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: isize) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<u128> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: u128) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<u128> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: u128) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<u16> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: u16) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<u16> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: u16) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<u32> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: u32) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<u32> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: u32) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<u64> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: u64) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<u64> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: u64) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<u8> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: u8) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<u8> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: u8) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<usize> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: usize) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> Shr<usize> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the >> operator.

fn shr(self, rhs: usize) -> FixedI32<Frac>

Performs the >> operation.

impl<Frac> ShrAssign<&i128> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &i128)

Performs the >>= operation.

impl<Frac> ShrAssign<&i16> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &i16)

Performs the >>= operation.

impl<Frac> ShrAssign<&i32> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &i32)

Performs the >>= operation.

impl<Frac> ShrAssign<&i64> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &i64)

Performs the >>= operation.

impl<Frac> ShrAssign<&i8> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &i8)

Performs the >>= operation.

impl<Frac> ShrAssign<&isize> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &isize)

Performs the >>= operation.

impl<Frac> ShrAssign<&u128> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &u128)

Performs the >>= operation.

impl<Frac> ShrAssign<&u16> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &u16)

Performs the >>= operation.

impl<Frac> ShrAssign<&u32> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &u32)

Performs the >>= operation.

impl<Frac> ShrAssign<&u64> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &u64)

Performs the >>= operation.

impl<Frac> ShrAssign<&u8> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &u8)

Performs the >>= operation.

impl<Frac> ShrAssign<&usize> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: &usize)

Performs the >>= operation.

impl<Frac> ShrAssign<i128> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: i128)

Performs the >>= operation.

impl<Frac> ShrAssign<i16> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: i16)

Performs the >>= operation.

impl<Frac> ShrAssign<i32> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: i32)

Performs the >>= operation.

impl<Frac> ShrAssign<i64> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: i64)

Performs the >>= operation.

impl<Frac> ShrAssign<i8> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: i8)

Performs the >>= operation.

impl<Frac> ShrAssign<isize> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: isize)

Performs the >>= operation.

impl<Frac> ShrAssign<u128> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: u128)

Performs the >>= operation.

impl<Frac> ShrAssign<u16> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: u16)

Performs the >>= operation.

impl<Frac> ShrAssign<u32> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: u32)

Performs the >>= operation.

impl<Frac> ShrAssign<u64> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: u64)

Performs the >>= operation.

impl<Frac> ShrAssign<u8> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: u8)

Performs the >>= operation.

impl<Frac> ShrAssign<usize> for FixedI32<Frac>

fn shr_assign(&mut self, rhs: usize)

Performs the >>= operation.

impl<Frac> Signed for FixedI32<Frac>

where Frac: IsLessOrEqual<U30, Output = True> + LeEqU32,

fn abs(&self) -> Self

Computes the absolute value.

fn abs_sub(&self, other: &Self) -> Self

The positive difference of two numbers.

fn signum(&self) -> Self

Returns the sign of the number.

fn is_positive(&self) -> bool

Returns true if the number is positive and false if the number is zero or negative.

fn is_negative(&self) -> bool

Returns true if the number is negative and false if the number is zero or positive.

impl<Frac> Sub<&FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the - operator.

fn sub(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the - operation.

impl<Frac> Sub<&FixedI32<Frac>> for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the - operator.

fn sub(self, rhs: &FixedI32<Frac>) -> FixedI32<Frac>

Performs the - operation.

impl<Frac> Sub<FixedI32<Frac>> for &FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the - operator.

fn sub(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the - operation.

impl<Frac> Sub for FixedI32<Frac>

type Output = FixedI32<Frac>

The resulting type after applying the - operator.

fn sub(self, rhs: FixedI32<Frac>) -> FixedI32<Frac>

Performs the - operation.

impl<Frac> SubAssign<&FixedI32<Frac>> for FixedI32<Frac>

fn sub_assign(&mut self, rhs: &FixedI32<Frac>)

Performs the -= operation.

impl<Frac> SubAssign for FixedI32<Frac>

fn sub_assign(&mut self, rhs: FixedI32<Frac>)

Performs the -= operation.

impl<'a, Frac: 'a> Sum<&'a FixedI32<Frac>> for FixedI32<Frac>

fn sum<I>(iter: I) -> FixedI32<Frac>

where I: Iterator<Item = &'a FixedI32<Frac>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<Frac> Sum for FixedI32<Frac>

fn sum<I>(iter: I) -> FixedI32<Frac>

where I: Iterator<Item = FixedI32<Frac>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<Frac: LeEqU32> ToFixed for FixedI32<Frac>

fn to_fixed<F: Fixed>(self) -> F

Converts a fixed-point number.

Any extra fractional bits are discarded, which rounds towards −∞.

Panics

When debug assertions are enabled, panics if the value does not fit. When debug assertions are not enabled, the wrapped value can be returned, but it is not considered a breaking change if in the future it panics; if wrapping is required use wrapping_to_fixed instead.

fn checked_to_fixed<F: Fixed>(self) -> Option<F>

Converts a fixed-point number if it fits, otherwise returns None.

Any extra fractional bits are discarded, which rounds towards −∞.

fn saturating_to_fixed<F: Fixed>(self) -> F

Converts a fixed-point number, saturating if it does not fit.

Any extra fractional bits are discarded, which rounds towards −∞.

fn wrapping_to_fixed<F: Fixed>(self) -> F

Converts a fixed-point number, wrapping if it does not fit.

Any extra fractional bits are discarded, which rounds towards −∞.

fn overflowing_to_fixed<F: Fixed>(self) -> (F, bool)

Converts a fixed-point number.

Returns a tuple of the value and a bool indicating whether an overflow has occurred. On overflow, the wrapped value is returned.

Any extra fractional bits are discarded, which rounds towards −∞.

fn unwrapped_to_fixed<F: Fixed>(self) -> F

Converts a fixed-point number, panicking if it does not fit.

Any extra fractional bits are discarded, which rounds towards −∞.

Panics

Panics if the value does not fit, even when debug assertions are not enabled.

impl<Frac: LeEqU32> ToPrimitive for FixedI32<Frac>

fn to_i64(&self) -> Option<i64>

Converts the value of self to an i64. If the value cannot be represented by an i64, then None is returned.

fn to_u64(&self) -> Option<u64>

Converts the value of self to a u64. If the value cannot be represented by a u64, then None is returned.

fn to_isize(&self) -> Option<isize>

Converts the value of self to an isize. If the value cannot be represented by an isize, then None is returned.

fn to_i8(&self) -> Option<i8>

Converts the value of self to an i8. If the value cannot be represented by an i8, then None is returned.

fn to_i16(&self) -> Option<i16>

Converts the value of self to an i16. If the value cannot be represented by an i16, then None is returned.

fn to_i32(&self) -> Option<i32>

Converts the value of self to an i32. If the value cannot be represented by an i32, then None is returned.

fn to_i128(&self) -> Option<i128>

Converts the value of self to an i128. If the value cannot be represented by an i128 (i64 under the default implementation), then None is returned.

fn to_usize(&self) -> Option<usize>

Converts the value of self to a usize. If the value cannot be represented by a usize, then None is returned.

fn to_u8(&self) -> Option<u8>

Converts the value of self to a u8. If the value cannot be represented by a u8, then None is returned.

fn to_u16(&self) -> Option<u16>

Converts the value of self to a u16. If the value cannot be represented by a u16, then None is returned.

fn to_u32(&self) -> Option<u32>

Converts the value of self to a u32. If the value cannot be represented by a u32, then None is returned.

fn to_u128(&self) -> Option<u128>

Converts the value of self to a u128. If the value cannot be represented by a u128 (u64 under the default implementation), then None is returned.

fn to_f32(&self) -> Option<f32>

Converts the value of self to an f32. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f32.

fn to_f64(&self) -> Option<f64>

Converts the value of self to an f64. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f64.

impl<Frac: LeEqU32> TransparentWrapper<FixedI32<Frac>> for Unwrapped<FixedI32<Frac>>

fn wrap(s: Inner) -> Self

where Self: Sized,

Convert the inner type into the wrapper type.

fn wrap_ref(s: &Inner) -> &Self

Convert a reference to the inner type into a reference to the wrapper type.

fn wrap_mut(s: &mut Inner) -> &mut Self

Convert a mutable reference to the inner type into a mutable reference to the wrapper type.

fn wrap_slice(s: &[Inner]) -> &[Self]

where Self: Sized,

Convert a slice to the inner type into a slice to the wrapper type.

fn wrap_slice_mut(s: &mut [Inner]) -> &mut [Self]

where Self: Sized,

Convert a mutable slice to the inner type into a mutable slice to the wrapper type.

fn peel(s: Self) -> Inner

where Self: Sized,

Convert the wrapper type into the inner type.

fn peel_ref(s: &Self) -> &Inner

Convert a reference to the wrapper type into a reference to the inner type.

fn peel_mut(s: &mut Self) -> &mut Inner

Convert a mutable reference to the wrapper type into a mutable reference to the inner type.

fn peel_slice(s: &[Self]) -> &[Inner]

where Self: Sized,

Convert a slice to the wrapped type into a slice to the inner type.

fn peel_slice_mut(s: &mut [Self]) -> &mut [Inner]

where Self: Sized,

Convert a mutable slice to the wrapped type into a mutable slice to the inner type.

impl<Frac: LeEqU32> TransparentWrapper<FixedI32<Frac>> for Wrapping<FixedI32<Frac>>

fn wrap(s: Inner) -> Self

where Self: Sized,

Convert the inner type into the wrapper type.

fn wrap_ref(s: &Inner) -> &Self

Convert a reference to the inner type into a reference to the wrapper type.

fn wrap_mut(s: &mut Inner) -> &mut Self

Convert a mutable reference to the inner type into a mutable reference to the wrapper type.

fn wrap_slice(s: &[Inner]) -> &[Self]

where Self: Sized,

Convert a slice to the inner type into a slice to the wrapper type.

fn wrap_slice_mut(s: &mut [Inner]) -> &mut [Self]

where Self: Sized,

Convert a mutable slice to the inner type into a mutable slice to the wrapper type.

fn peel(s: Self) -> Inner

where Self: Sized,

Convert the wrapper type into the inner type.

fn peel_ref(s: &Self) -> &Inner

Convert a reference to the wrapper type into a reference to the inner type.

fn peel_mut(s: &mut Self) -> &mut Inner

Convert a mutable reference to the wrapper type into a mutable reference to the inner type.

fn peel_slice(s: &[Self]) -> &[Inner]

where Self: Sized,

Convert a slice to the wrapped type into a slice to the inner type.

fn peel_slice_mut(s: &mut [Self]) -> &mut [Inner]

where Self: Sized,

Convert a mutable slice to the wrapped type into a mutable slice to the inner type.

impl<Frac> TransparentWrapper<i32> for FixedI32<Frac>

fn wrap(s: Inner) -> Self

where Self: Sized,

Convert the inner type into the wrapper type.

fn wrap_ref(s: &Inner) -> &Self

Convert a reference to the inner type into a reference to the wrapper type.

fn wrap_mut(s: &mut Inner) -> &mut Self

Convert a mutable reference to the inner type into a mutable reference to the wrapper type.

fn wrap_slice(s: &[Inner]) -> &[Self]

where Self: Sized,

Convert a slice to the inner type into a slice to the wrapper type.

fn wrap_slice_mut(s: &mut [Inner]) -> &mut [Self]

where Self: Sized,

Convert a mutable slice to the inner type into a mutable slice to the wrapper type.

fn peel(s: Self) -> Inner

where Self: Sized,

Convert the wrapper type into the inner type.

fn peel_ref(s: &Self) -> &Inner

Convert a reference to the wrapper type into a reference to the inner type.

fn peel_mut(s: &mut Self) -> &mut Inner

Convert a mutable reference to the wrapper type into a mutable reference to the inner type.

fn peel_slice(s: &[Self]) -> &[Inner]

where Self: Sized,

Convert a slice to the wrapped type into a slice to the inner type.

fn peel_slice_mut(s: &mut [Self]) -> &mut [Inner]

where Self: Sized,

Convert a mutable slice to the wrapped type into a mutable slice to the inner type.

impl<Frac: LeEqU32> UnwrappedCast<F128> for FixedI32<Frac>

fn unwrapped_cast(self) -> F128

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<F128Bits> for FixedI32<Frac>

fn unwrapped_cast(self) -> F128Bits

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> UnwrappedCast<FixedI128<FracDst>> for FixedI32<FracSrc>

fn unwrapped_cast(self) -> FixedI128<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> UnwrappedCast<FixedI16<FracDst>> for FixedI32<FracSrc>

fn unwrapped_cast(self) -> FixedI16<FracDst>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for F128

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for F128Bits

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for bf16

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for bool

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for f16

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for f32

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for f64

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for i128

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for i16

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for i32

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for i64

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for i8

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for isize

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for u128

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for u16

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for u32

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for u64

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for u8

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<FixedI32<Frac>> for usize

fn unwrapped_cast(self) -> FixedI32<Frac>

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> UnwrappedCast<FixedI32<FracDst>> for FixedI128<FracSrc>

fn unwrapped_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> UnwrappedCast<FixedI32<FracDst>> for FixedI16<FracSrc>

fn unwrapped_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> UnwrappedCast<FixedI32<FracDst>> for FixedI32<FracSrc>

fn unwrapped_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> UnwrappedCast<FixedI32<FracDst>> for FixedI64<FracSrc>

fn unwrapped_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> UnwrappedCast<FixedI32<FracDst>> for FixedI8<FracSrc>

fn unwrapped_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> UnwrappedCast<FixedI32<FracDst>> for FixedU128<FracSrc>

fn unwrapped_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> UnwrappedCast<FixedI32<FracDst>> for FixedU16<FracSrc>

fn unwrapped_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> UnwrappedCast<FixedI32<FracDst>> for FixedU32<FracSrc>

fn unwrapped_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> UnwrappedCast<FixedI32<FracDst>> for FixedU64<FracSrc>

fn unwrapped_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> UnwrappedCast<FixedI32<FracDst>> for FixedU8<FracSrc>

fn unwrapped_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> UnwrappedCast<FixedI64<FracDst>> for FixedI32<FracSrc>

fn unwrapped_cast(self) -> FixedI64<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> UnwrappedCast<FixedI8<FracDst>> for FixedI32<FracSrc>

fn unwrapped_cast(self) -> FixedI8<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> UnwrappedCast<FixedU128<FracDst>> for FixedI32<FracSrc>

fn unwrapped_cast(self) -> FixedU128<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> UnwrappedCast<FixedU16<FracDst>> for FixedI32<FracSrc>

fn unwrapped_cast(self) -> FixedU16<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> UnwrappedCast<FixedU32<FracDst>> for FixedI32<FracSrc>

fn unwrapped_cast(self) -> FixedU32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> UnwrappedCast<FixedU64<FracDst>> for FixedI32<FracSrc>

fn unwrapped_cast(self) -> FixedU64<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> UnwrappedCast<FixedU8<FracDst>> for FixedI32<FracSrc>

fn unwrapped_cast(self) -> FixedU8<FracDst>

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<bf16> for FixedI32<Frac>

fn unwrapped_cast(self) -> bf16

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<f16> for FixedI32<Frac>

fn unwrapped_cast(self) -> f16

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<f32> for FixedI32<Frac>

fn unwrapped_cast(self) -> f32

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<f64> for FixedI32<Frac>

fn unwrapped_cast(self) -> f64

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<i128> for FixedI32<Frac>

fn unwrapped_cast(self) -> i128

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<i16> for FixedI32<Frac>

fn unwrapped_cast(self) -> i16

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<i32> for FixedI32<Frac>

fn unwrapped_cast(self) -> i32

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<i64> for FixedI32<Frac>

fn unwrapped_cast(self) -> i64

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<i8> for FixedI32<Frac>

fn unwrapped_cast(self) -> i8

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<isize> for FixedI32<Frac>

fn unwrapped_cast(self) -> isize

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<u128> for FixedI32<Frac>

fn unwrapped_cast(self) -> u128

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<u16> for FixedI32<Frac>

fn unwrapped_cast(self) -> u16

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<u32> for FixedI32<Frac>

fn unwrapped_cast(self) -> u32

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<u64> for FixedI32<Frac>

fn unwrapped_cast(self) -> u64

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<u8> for FixedI32<Frac>

fn unwrapped_cast(self) -> u8

Casts the value.

impl<Frac: LeEqU32> UnwrappedCast<usize> for FixedI32<Frac>

fn unwrapped_cast(self) -> usize

Casts the value.

impl<Frac: LeEqU32> UpperExp for FixedI32<Frac>

fn fmt(&self, f: &mut Formatter<'_>) -> FmtResult

Formats the value using the given formatter.

impl<Frac: LeEqU32> UpperHex for FixedI32<Frac>

fn fmt(&self, f: &mut Formatter<'_>) -> FmtResult

Formats the value using the given formatter.

impl<Frac> WrappingAdd for FixedI32<Frac>

fn wrapping_add(&self, v: &Self) -> Self

Wrapping (modular) addition. Computes self + other, wrapping around at the boundary of the type.

impl<Frac: LeEqU32> WrappingCast<F128> for FixedI32<Frac>

fn wrapping_cast(self) -> F128

Casts the value.

impl<Frac: LeEqU32> WrappingCast<F128Bits> for FixedI32<Frac>

fn wrapping_cast(self) -> F128Bits

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> WrappingCast<FixedI128<FracDst>> for FixedI32<FracSrc>

fn wrapping_cast(self) -> FixedI128<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> WrappingCast<FixedI16<FracDst>> for FixedI32<FracSrc>

fn wrapping_cast(self) -> FixedI16<FracDst>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for F128

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for F128Bits

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for bf16

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for bool

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for f16

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for f32

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for f64

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for i128

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for i16

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for i32

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for i64

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for i8

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for isize

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for u128

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for u16

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for u32

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for u64

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for u8

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<FixedI32<Frac>> for usize

fn wrapping_cast(self) -> FixedI32<Frac>

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> WrappingCast<FixedI32<FracDst>> for FixedI128<FracSrc>

fn wrapping_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> WrappingCast<FixedI32<FracDst>> for FixedI16<FracSrc>

fn wrapping_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> WrappingCast<FixedI32<FracDst>> for FixedI32<FracSrc>

fn wrapping_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> WrappingCast<FixedI32<FracDst>> for FixedI64<FracSrc>

fn wrapping_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> WrappingCast<FixedI32<FracDst>> for FixedI8<FracSrc>

fn wrapping_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU128, FracDst: LeEqU32> WrappingCast<FixedI32<FracDst>> for FixedU128<FracSrc>

fn wrapping_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU16, FracDst: LeEqU32> WrappingCast<FixedI32<FracDst>> for FixedU16<FracSrc>

fn wrapping_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> WrappingCast<FixedI32<FracDst>> for FixedU32<FracSrc>

fn wrapping_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU64, FracDst: LeEqU32> WrappingCast<FixedI32<FracDst>> for FixedU64<FracSrc>

fn wrapping_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU8, FracDst: LeEqU32> WrappingCast<FixedI32<FracDst>> for FixedU8<FracSrc>

fn wrapping_cast(self) -> FixedI32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> WrappingCast<FixedI64<FracDst>> for FixedI32<FracSrc>

fn wrapping_cast(self) -> FixedI64<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> WrappingCast<FixedI8<FracDst>> for FixedI32<FracSrc>

fn wrapping_cast(self) -> FixedI8<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU128> WrappingCast<FixedU128<FracDst>> for FixedI32<FracSrc>

fn wrapping_cast(self) -> FixedU128<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU16> WrappingCast<FixedU16<FracDst>> for FixedI32<FracSrc>

fn wrapping_cast(self) -> FixedU16<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU32> WrappingCast<FixedU32<FracDst>> for FixedI32<FracSrc>

fn wrapping_cast(self) -> FixedU32<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU64> WrappingCast<FixedU64<FracDst>> for FixedI32<FracSrc>

fn wrapping_cast(self) -> FixedU64<FracDst>

Casts the value.

impl<FracSrc: LeEqU32, FracDst: LeEqU8> WrappingCast<FixedU8<FracDst>> for FixedI32<FracSrc>

fn wrapping_cast(self) -> FixedU8<FracDst>

Casts the value.

impl<Frac: LeEqU32> WrappingCast<bf16> for FixedI32<Frac>

fn wrapping_cast(self) -> bf16

Casts the value.

impl<Frac: LeEqU32> WrappingCast<f16> for FixedI32<Frac>

fn wrapping_cast(self) -> f16

Casts the value.

impl<Frac: LeEqU32> WrappingCast<f32> for FixedI32<Frac>

fn wrapping_cast(self) -> f32

Casts the value.

impl<Frac: LeEqU32> WrappingCast<f64> for FixedI32<Frac>

fn wrapping_cast(self) -> f64

Casts the value.

impl<Frac: LeEqU32> WrappingCast<i128> for FixedI32<Frac>

fn wrapping_cast(self) -> i128

Casts the value.

impl<Frac: LeEqU32> WrappingCast<i16> for FixedI32<Frac>

fn wrapping_cast(self) -> i16

Casts the value.

impl<Frac: LeEqU32> WrappingCast<i32> for FixedI32<Frac>

fn wrapping_cast(self) -> i32

Casts the value.

impl<Frac: LeEqU32> WrappingCast<i64> for FixedI32<Frac>

fn wrapping_cast(self) -> i64

Casts the value.

impl<Frac: LeEqU32> WrappingCast<i8> for FixedI32<Frac>

fn wrapping_cast(self) -> i8

Casts the value.

impl<Frac: LeEqU32> WrappingCast<isize> for FixedI32<Frac>

fn wrapping_cast(self) -> isize

Casts the value.

impl<Frac: LeEqU32> WrappingCast<u128> for FixedI32<Frac>

fn wrapping_cast(self) -> u128

Casts the value.

impl<Frac: LeEqU32> WrappingCast<u16> for FixedI32<Frac>

fn wrapping_cast(self) -> u16

Casts the value.

impl<Frac: LeEqU32> WrappingCast<u32> for FixedI32<Frac>

fn wrapping_cast(self) -> u32

Casts the value.

impl<Frac: LeEqU32> WrappingCast<u64> for FixedI32<Frac>

fn wrapping_cast(self) -> u64

Casts the value.

impl<Frac: LeEqU32> WrappingCast<u8> for FixedI32<Frac>

fn wrapping_cast(self) -> u8

Casts the value.

impl<Frac: LeEqU32> WrappingCast<usize> for FixedI32<Frac>

fn wrapping_cast(self) -> usize

Casts the value.

impl<Frac: LeEqU32> WrappingMul for FixedI32<Frac>

fn wrapping_mul(&self, v: &Self) -> Self

Wrapping (modular) multiplication. Computes self * other, wrapping around at the boundary of the type.

impl<Frac> WrappingNeg for FixedI32<Frac>

fn wrapping_neg(&self) -> Self

Wrapping (modular) negation. Computes -self, wrapping around at the boundary of the type.

impl<Frac> WrappingShl for FixedI32<Frac>

fn wrapping_shl(&self, rhs: u32) -> Self

Panic-free bitwise shift-left; yields self << mask(rhs), where mask removes any high order bits of rhs that would cause the shift to exceed the bitwidth of the type.

impl<Frac> WrappingShr for FixedI32<Frac>

fn wrapping_shr(&self, rhs: u32) -> Self

Panic-free bitwise shift-right; yields self >> mask(rhs), where mask removes any high order bits of rhs that would cause the shift to exceed the bitwidth of the type.

impl<Frac> WrappingSub for FixedI32<Frac>

fn wrapping_sub(&self, v: &Self) -> Self

Wrapping (modular) subtraction. Computes self - other, wrapping around at the boundary of the type.

impl<Frac> Zero for FixedI32<Frac>

fn zero() -> Self

Returns the additive identity element of Self, 0.

fn is_zero(&self) -> bool

Returns true if self is equal to the additive identity.

fn set_zero(&mut self)

Sets self to the additive identity element of Self, 0.

impl<Frac> Zeroable for FixedI32<Frac>

fn zeroed() -> Self

Calls zeroed.

impl<Frac> Copy for FixedI32<Frac>

impl<Frac: Unsigned> Eq for FixedI32<Frac>

impl<Frac: LeEqU32> FixedOptionalFeatures for FixedI32<Frac>

impl<Frac: 'static> Pod for FixedI32<Frac>