Struct SplitViewTemplateSettings 

pub struct SplitViewTemplateSettings { /* private fields */ }

Provides calculated values for use with the control theme or template of the SplitView.

This class is NOT intended for general use outside of control templates.

Implementations

impl SplitViewTemplateSettings

pub const TYPE: &'static TypeInfo = <SplitViewTemplateSettings as ::ferroui_base::StaticType>::TYPE

The runtime type of this class.

pub fn to_ref(&self) -> Ref<SplitViewTemplateSettings>

Returns a strong reference to this object.

impl SplitViewTemplateSettings

pub fn closed_pane_width_property() -> &'static StyledProperty<f64>

Defines the ClosedPaneWidth property.

pub fn pane_column_grid_length_property() -> &'static StyledProperty<GridLength>

Defines the PaneColumnGridLength property.

pub fn closed_pane_height_property() -> &'static StyledProperty<f64>

Defines the ClosedPaneHeight property.

pub fn pane_row_grid_length_property() -> &'static StyledProperty<GridLength>

Defines the PaneRowGridLength property.

impl SplitViewTemplateSettings

pub fn closed_pane_width(&self) -> f64

The width of the pane when it is closed.

pub fn pane_column_grid_length(&self) -> GridLength

The length of the grid column of the pane.

pub fn closed_pane_height(&self) -> f64

The height of the pane when it is closed.

pub fn pane_row_grid_length(&self) -> GridLength

The length of the grid row of the pane.

Methods from Deref<Target = FerroObject>

pub fn dispatcher(&self) -> &Arc<Dispatcher>

Returns the Dispatcher that this object is associated with: the dispatcher of the thread that owns the object.

pub fn check_access(&self) -> bool

Returns whether the calling thread is the thread that owns this object.

pub fn verify_access(&self)

Checks that the calling thread is the thread that owns this object.

Panics

Panics when it is not.

pub fn to_ref(&self) -> Ref<FerroObject>

A strong reference to this object.

pub fn to_weak(&self) -> WeakRef<FerroObject>

A weak reference to this object.

pub fn get_type(&self) -> &'static TypeInfo

The runtime type of the object.

pub fn is<T>(&self) -> bool

where T: ObjectType,

Whether the object is of class T or a class derived from it.

pub fn downcast_ref<T>(&self) -> Option<&T>

where T: ObjectType,

Returns the object viewed as class T if it is one.

pub fn on_property_changed(&self, change: &FerroPropertyChangedEventArgs<'_>)

Invokes the on_property_changed virtual member.

pub fn inheritance_parent(&self) -> Option<Ref<FerroObject>>

The parent object that inherited property values are inherited from.

pub fn set_inheritance_parent(&self, value: impl Into<Nullable<FerroObject>>)

Sets the parent object that inherited property values are inherited from.

pub fn clear_value<T>(&self, property: &'static StyledProperty<T>)

where T: PropertyValue,

Clears a property’s local value.

pub fn get_value<T>(&self, property: &'static StyledProperty<T>) -> T

where T: PropertyValue,

Gets a property value.

pub fn get_base_value<T>( &self, property: &'static StyledProperty<T>, ) -> Option<T>

where T: PropertyValue,

Gets a property’s base value: the value excluding animated values. Returns None if the value comes from inheritance or the default.

pub fn is_animating(&self, property: &FerroProperty) -> bool

Checks whether a property is animating.

pub fn is_set(&self, property: &FerroProperty) -> bool

Checks whether a styled property has a value assigned to it or a binding targeting it.

pub fn set_value<T>(&self, property: &'static StyledProperty<T>, value: T)

where T: PropertyValue,

Sets a property value with local value priority.

pub fn set_value_with_priority<T>( &self, property: &'static StyledProperty<T>, value: T, priority: BindingPriority, ) -> Option<Rc<dyn IDisposable>>

where T: PropertyValue,

Sets a property value with the given priority. For priorities other than local value, disposing the returned handle removes the value.

pub fn set_current_value<T>( &self, property: &'static StyledProperty<T>, value: T, )

where T: PropertyValue,

Sets the value of a property without changing its value source.

This is used by a component that programmatically sets the value of one of its own properties without disabling an application’s declared use of the property: the effective value changes, but existing bindings and styles continue to work. The new value has the property’s current priority.

pub fn bind_binding( &self, property: &'static FerroProperty, binding: &dyn BindingBase, ) -> Rc<dyn BindingExpressionBase>

Binds a property to a binding. Returns the binding expression which represents the binding instance on this object.

pub fn bind_binding_with_anchor( &self, property: &'static FerroProperty, binding: &dyn BindingBase, anchor: Option<&Ref<FerroObject>>, ) -> Rc<dyn BindingExpressionBase>

Binds a property to a binding.

Some bindings need context to locate their source: a data context, named elements or resources. If this object is not an element, or is not yet attached to the tree, anchor provides that context.

pub fn indexer(&self, binding: &IndexerDescriptor) -> IndexerBinding

Gets a binding to a property of this object: the indexer taking an IndexerDescriptor (source[!Property] is source.indexer(&Property.bind())).

pub fn bind_indexer( &self, binding: &IndexerDescriptor, value: &dyn BindingBase, ) -> Rc<dyn BindingExpressionBase>

Binds the property of an IndexerDescriptor to a binding: the setter of the indexer (target[!Property] = binding is target.bind_indexer(&Property.bind(), &binding)).

pub fn bind<T>( &self, property: &'static StyledProperty<T>, source: Rc<dyn IObservable<T>>, priority: BindingPriority, ) -> Rc<dyn IDisposable>

where T: PropertyValue,

Binds a property to an observable.

pub fn bind_value<T>( &self, property: &'static StyledProperty<T>, source: Rc<dyn IObservable<BindingValue<T>>>, priority: BindingPriority, ) -> Rc<dyn IDisposable>

where T: PropertyValue,

Binds a property to an observable of binding values.

pub fn bind_untyped<T>( &self, property: &'static StyledProperty<T>, source: Rc<dyn IObservable<Rc<dyn AnyValue>>>, priority: BindingPriority, ) -> Rc<dyn IDisposable>

where T: PropertyValue,

Binds a property to an observable of untyped values.

pub fn coerce_value(&self, property: &'static FerroProperty)

Coerces the specified property.

pub fn get_direct_value<T>(&self, property: &'static DirectPropertyBase<T>) -> T

where T: PropertyValue,

Gets a direct property value.

pub fn set_direct_value<T>( &self, property: &'static DirectPropertyBase<T>, value: T, )

where T: PropertyValue,

Sets a direct property value.

pub fn clear_direct_value<T>(&self, property: &'static DirectPropertyBase<T>)

where T: PropertyValue,

Resets a direct property to its unset value.

pub fn bind_direct<T>( &self, property: &'static DirectPropertyBase<T>, source: Rc<dyn IObservable<T>>, ) -> Rc<dyn IDisposable>

where T: PropertyValue,

Binds a direct property to an observable.

pub fn bind_direct_value<T>( &self, property: &'static DirectPropertyBase<T>, source: Rc<dyn IObservable<BindingValue<T>>>, ) -> Rc<dyn IDisposable>

where T: PropertyValue,

Binds a direct property to an observable of binding values.

pub fn bind_direct_untyped<T>( &self, property: &'static DirectPropertyBase<T>, source: Rc<dyn IObservable<Rc<dyn AnyValue>>>, ) -> Rc<dyn IDisposable>

where T: PropertyValue,

Binds a direct property to an observable of untyped values.

pub fn set_and_raise<T>( &self, property: &'static DirectPropertyBase<T>, field: &RefCell<T>, value: T, ) -> bool

where T: PropertyValue,

Sets the backing field of a direct property, raising a change notification if the value changed. Returns true if it changed.

pub fn set_and_raise_cell<T>( &self, property: &'static DirectPropertyBase<T>, field: &Cell<T>, value: T, ) -> bool

where T: PropertyValue + Copy,

set_and_raise for Copy values stored in a Cell.

pub fn get_value_untyped( &self, property: &'static FerroProperty, ) -> Rc<dyn AnyValue>

Gets a property value as an untyped value.

pub fn set_value_untyped( &self, property: &'static FerroProperty, value: &(dyn Any + 'static), priority: BindingPriority, ) -> Option<Rc<dyn IDisposable>>

Sets a property from an untyped value, which must hold exactly the property’s value type or the unset marker.

pub fn set_current_value_untyped( &self, property: &'static FerroProperty, value: &(dyn Any + 'static), )

set_current_value with an untyped value.

pub fn clear_value_untyped(&self, property: &'static FerroProperty)

Clears a property’s local value.

pub fn bind_property_untyped( &self, property: &'static FerroProperty, source: Rc<dyn IObservable<Rc<dyn AnyValue>>>, priority: BindingPriority, ) -> Rc<dyn IDisposable>

Binds a property to an observable of untyped values.

pub fn property_changed( &self, handler: impl Fn(&FerroPropertyChangedEventArgs<'_>) + 'static, ) -> Rc<dyn IDisposable>

Subscribes to property changes on this object. Disposing the returned handle unsubscribes.

pub fn add_property_changed_handler( &self, handler: Rc<dyn Fn(&FerroPropertyChangedEventArgs<'_>)>, ) -> u64

Subscribes handler to property changes on this object and returns the token that remove_property_changed_handler takes: property_changed for a subscriber that keeps the object and the token itself, so that no handle is made.

pub fn remove_property_changed_handler(&self, token: u64) -> bool

Ends a subscription of add_property_changed_handler.

pub fn property_changed_subscriber_count(&self) -> usize

The number of subscribers to property changes on this object (a diagnostics member, used by tests to verify that subscriptions are released).

pub fn raise_property_changed<T>( &self, property: &'static FerroProperty, old_value: Option<&T>, new_value: &T, priority: BindingPriority, is_effective_value: bool, )

where T: PropertyValue,

Raises a property changed notification.

pub fn raise_direct_property_changed<T>( &self, property: &'static DirectPropertyBase<T>, old_value: &T, new_value: &T, )

where T: PropertyValue,

Raises a property changed notification for a direct property.

Trait Implementations

impl Deref for SplitViewTemplateSettings

type Target = FerroObject

The resulting type after dereferencing.

fn deref(&self) -> &FerroObject

Dereferences the value.

impl FerroObjectImpl for SplitViewTemplateSettings

fn constructed(this: &Self)

Called once, right after the object has been allocated. This is where constructor logic that needs a reference to the object runs. Overrides must call parent_constructed first.

fn on_property_changed_core( this: &Self, change: &FerroPropertyChangedEventArgs<'_>, )

Called for every property change on the object, including changes of non-effective (base) values. Overriding this is rarely needed; override on_property_changed instead.

fn on_property_changed(this: &Self, change: &FerroPropertyChangedEventArgs<'_>)

Called when the effective value of a property changes on the object.

fn update_data_validation( this: &Self, property: &'static FerroProperty, state: BindingValueType, error: Option<&BindingError>, )

Called to update the validation state for properties for which data validation is enabled.

impl ObjectType for SplitViewTemplateSettings

type Parent = FerroObject

The base class. The root class is its own parent.

type VTable = <FerroObject as ObjectType>::VTable

The virtual table of the class.

fn vtable() -> &'static Self::VTable

The virtual table used by instances whose most-derived class is Self.

fn register_class()

The static initialisation of the class. The first call on a thread, after doing the same for the base class:

impl StaticType for SplitViewTemplateSettings

const TYPE: &'static TypeInfo

The runtime type.

impl<T> Subclassable<T> for SplitViewTemplateSettings

where FerroObject: Subclassable<T>,

impl Upcast<SplitViewTemplateSettings> for SplitViewTemplateSettings

fn upcast(&self) -> &SplitViewTemplateSettings

impl<T: ?Sized> Upcast<T> for SplitViewTemplateSettings

where FerroObject: Upcast<T>,

fn upcast(&self) -> &T