Skip to main content

ReviewBriefOutput

fallow_output

Struct ReviewBriefOutput 

Source 
pub struct ReviewBriefOutput<Focus, Weakening, Routing, Decisions> {
    pub schema_version: ReviewBriefSchemaVersion,
    pub version: String,
    pub command: String,
    pub triage: DiffTriage,
    pub graph_facts: GraphFacts,
    pub partition: PartitionFacts,
    pub impact_closure: ImpactClosureFacts,
    pub focus: Focus,
    pub deltas: ReviewDeltas,
    pub weakening: Vec<Weakening>,
    pub routing: Routing,
    pub decisions: Decisions,
}
Expand description

The full fallow audit --brief --format json envelope. Carries the informational verdict, the triage and graph-facts orientation stages, plus the reused “subtract” section (the same dead-code / duplication / complexity payload fallow audit --format json emits).

Fields§

§schema_version: ReviewBriefSchemaVersion

Independently-versioned brief schema version.

§version: String

Fallow CLI version that produced this output.

§command: String

Command discriminator singleton: always "audit-brief".

§triage: DiffTriage§graph_facts: GraphFacts

Stage 1: graph orientation facts.

§partition: PartitionFacts

Stage 2: the partition + order (by-module units + dependency-sensible review order). The backbone the directed-review loop hands the agent.

§impact_closure: ImpactClosureFacts

Stage 3: the impact closure (affected-not-shown + coordination gap).

§focus: Focus

Stage 4: the weighted focus map. A composite attention score per changed-file unit (fan-in/out + security taint + risk zone + change shape), with review-here / not-prioritized labels (NEVER skip in free mode), a per-unit confidence flag, and the FULL deprioritized escape-hatch list so every de-prioritized piece is reachable. Stage 4 sits UNDER the decision surface as drill-down.

§deltas: ReviewDeltas

6.A: diff-aware deterministic deltas (boundary/cycle introduced + exports-aware public-API surface delta), new-vs-pre-existing.

§weakening: Vec<Weakening>

6.F, headline: reviewer-private weakening signals (tests removed/skipped, thresholds lowered, suppressions added, security steps removed). Advisory, never gates, never auto-posted.

§routing: Routing

6.D: ownership-aware reviewer routing (per-file expert + bus-factor).

§decisions: Decisions

6.G, the APEX: the decision surface. The ranked, capped, signal_id-anchored set of consequential structural decisions, each framed as a judgment question with its routed expert. This is the only thing the brief visibly leads with; the stages above are its drill-down derivation.

Trait Implementations§

Source§

impl<Focus: Clone, Weakening: Clone, Routing: Clone, Decisions: Clone> Clone for ReviewBriefOutput<Focus, Weakening, Routing, Decisions>

Source§

fn clone(&self) -> ReviewBriefOutput<Focus, Weakening, Routing, Decisions>

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl<Focus: Debug, Weakening: Debug, Routing: Debug, Decisions: Debug> Debug for ReviewBriefOutput<Focus, Weakening, Routing, Decisions>

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl<Focus, Weakening, Routing, Decisions> Serialize for ReviewBriefOutput<Focus, Weakening, Routing, Decisions>
where Focus: Serialize, Weakening: Serialize, Routing: Serialize, Decisions: Serialize,

Source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more

Auto Trait Implementations§

§

impl<Focus, Weakening, Routing, Decisions> Freeze for ReviewBriefOutput<Focus, Weakening, Routing, Decisions>
where Focus: Freeze, Routing: Freeze, Decisions: Freeze,

§

impl<Focus, Weakening, Routing, Decisions> RefUnwindSafe for ReviewBriefOutput<Focus, Weakening, Routing, Decisions>
where Focus: RefUnwindSafe, Routing: RefUnwindSafe, Decisions: RefUnwindSafe, Weakening: RefUnwindSafe,

§

impl<Focus, Weakening, Routing, Decisions> Send for ReviewBriefOutput<Focus, Weakening, Routing, Decisions>
where Focus: Send, Routing: Send, Decisions: Send, Weakening: Send,

§

impl<Focus, Weakening, Routing, Decisions> Sync for ReviewBriefOutput<Focus, Weakening, Routing, Decisions>
where Focus: Sync, Routing: Sync, Decisions: Sync, Weakening: Sync,

§

impl<Focus, Weakening, Routing, Decisions> Unpin for ReviewBriefOutput<Focus, Weakening, Routing, Decisions>
where Focus: Unpin, Routing: Unpin, Decisions: Unpin, Weakening: Unpin,

§

impl<Focus, Weakening, Routing, Decisions> UnsafeUnpin for ReviewBriefOutput<Focus, Weakening, Routing, Decisions>
where Focus: UnsafeUnpin, Routing: UnsafeUnpin, Decisions: UnsafeUnpin,

§

impl<Focus, Weakening, Routing, Decisions> UnwindSafe for ReviewBriefOutput<Focus, Weakening, Routing, Decisions>
where Focus: UnwindSafe, Routing: UnwindSafe, Decisions: UnwindSafe, Weakening: UnwindSafe,

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<'a, T> FromIn<'a, T> for T

Source§

fn from_in(t: T, _: &'a Allocator) -> T

Converts to this type from the input type within the given allocator.
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<'a, T, U> IntoIn<'a, U> for T
where U: FromIn<'a, T>,

Source§

fn into_in(self, allocator: &'a Allocator) -> U

Converts this type into the (usually inferred) input type within the given allocator.
Source§

impl<D> OwoColorize for D

Source§

fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>
where C: Color,

Set the foreground color generically Read more
Source§

fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>
where C: Color,

Set the background color generically. Read more
Source§

fn black(&self) -> FgColorDisplay<'_, Black, Self>

Change the foreground color to black
Source§

fn on_black(&self) -> BgColorDisplay<'_, Black, Self>

Change the background color to black
Source§

fn red(&self) -> FgColorDisplay<'_, Red, Self>

Change the foreground color to red
Source§

fn on_red(&self) -> BgColorDisplay<'_, Red, Self>

Change the background color to red
Source§

fn green(&self) -> FgColorDisplay<'_, Green, Self>

Change the foreground color to green
Source§

fn on_green(&self) -> BgColorDisplay<'_, Green, Self>

Change the background color to green
Source§

fn yellow(&self) -> FgColorDisplay<'_, Yellow, Self>

Change the foreground color to yellow
Source§

fn on_yellow(&self) -> BgColorDisplay<'_, Yellow, Self>

Change the background color to yellow
Source§

fn blue(&self) -> FgColorDisplay<'_, Blue, Self>

Change the foreground color to blue
Source§

fn on_blue(&self) -> BgColorDisplay<'_, Blue, Self>

Change the background color to blue
Source§

fn magenta(&self) -> FgColorDisplay<'_, Magenta, Self>

Change the foreground color to magenta
Source§

fn on_magenta(&self) -> BgColorDisplay<'_, Magenta, Self>

Change the background color to magenta
Source§

fn purple(&self) -> FgColorDisplay<'_, Magenta, Self>

Change the foreground color to purple
Source§

fn on_purple(&self) -> BgColorDisplay<'_, Magenta, Self>

Change the background color to purple
Source§

fn cyan(&self) -> FgColorDisplay<'_, Cyan, Self>

Change the foreground color to cyan
Source§

fn on_cyan(&self) -> BgColorDisplay<'_, Cyan, Self>

Change the background color to cyan
Source§

fn white(&self) -> FgColorDisplay<'_, White, Self>

Change the foreground color to white
Source§

fn on_white(&self) -> BgColorDisplay<'_, White, Self>

Change the background color to white
Source§

fn default_color(&self) -> FgColorDisplay<'_, Default, Self>

Change the foreground color to the terminal default
Source§

fn on_default_color(&self) -> BgColorDisplay<'_, Default, Self>

Change the background color to the terminal default
Source§

fn bright_black(&self) -> FgColorDisplay<'_, BrightBlack, Self>

Change the foreground color to bright black
Source§

fn on_bright_black(&self) -> BgColorDisplay<'_, BrightBlack, Self>

Change the background color to bright black
Source§

fn bright_red(&self) -> FgColorDisplay<'_, BrightRed, Self>

Change the foreground color to bright red
Source§

fn on_bright_red(&self) -> BgColorDisplay<'_, BrightRed, Self>

Change the background color to bright red
Source§

fn bright_green(&self) -> FgColorDisplay<'_, BrightGreen, Self>

Change the foreground color to bright green
Source§

fn on_bright_green(&self) -> BgColorDisplay<'_, BrightGreen, Self>

Change the background color to bright green
Source§

fn bright_yellow(&self) -> FgColorDisplay<'_, BrightYellow, Self>

Change the foreground color to bright yellow
Source§

fn on_bright_yellow(&self) -> BgColorDisplay<'_, BrightYellow, Self>

Change the background color to bright yellow
Source§

fn bright_blue(&self) -> FgColorDisplay<'_, BrightBlue, Self>

Change the foreground color to bright blue
Source§

fn on_bright_blue(&self) -> BgColorDisplay<'_, BrightBlue, Self>

Change the background color to bright blue
Source§

fn bright_magenta(&self) -> FgColorDisplay<'_, BrightMagenta, Self>

Change the foreground color to bright magenta
Source§

fn on_bright_magenta(&self) -> BgColorDisplay<'_, BrightMagenta, Self>

Change the background color to bright magenta
Source§

fn bright_purple(&self) -> FgColorDisplay<'_, BrightMagenta, Self>

Change the foreground color to bright purple
Source§

fn on_bright_purple(&self) -> BgColorDisplay<'_, BrightMagenta, Self>

Change the background color to bright purple
Source§

fn bright_cyan(&self) -> FgColorDisplay<'_, BrightCyan, Self>

Change the foreground color to bright cyan
Source§

fn on_bright_cyan(&self) -> BgColorDisplay<'_, BrightCyan, Self>

Change the background color to bright cyan
Source§

fn bright_white(&self) -> FgColorDisplay<'_, BrightWhite, Self>

Change the foreground color to bright white
Source§

fn on_bright_white(&self) -> BgColorDisplay<'_, BrightWhite, Self>

Change the background color to bright white
Source§

fn bold(&self) -> BoldDisplay<'_, Self>

Make the text bold
Source§

fn dimmed(&self) -> DimDisplay<'_, Self>

Make the text dim
Source§

fn italic(&self) -> ItalicDisplay<'_, Self>

Make the text italicized
Source§

fn underline(&self) -> UnderlineDisplay<'_, Self>

Make the text underlined
Make the text blink
Make the text blink (but fast!)
Source§

fn reversed(&self) -> ReversedDisplay<'_, Self>

Swap the foreground and background colors
Source§

fn hidden(&self) -> HiddenDisplay<'_, Self>

Hide the text
Source§

fn strikethrough(&self) -> StrikeThroughDisplay<'_, Self>

Cross out the text
Source§

fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the foreground color at runtime. Only use if you do not know which color will be used at compile-time. If the color is constant, use either OwoColorize::fg or a color-specific method, such as OwoColorize::green, Read more
Source§

fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the background color at runtime. Only use if you do not know what color to use at compile-time. If the color is constant, use either OwoColorize::bg or a color-specific method, such as OwoColorize::on_yellow, Read more
Source§

fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the foreground color to a specific RGB value.
Source§

fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the background color to a specific RGB value.
Source§

fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>

Sets the foreground color to an RGB value.
Source§

fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>

Sets the background color to an RGB value.
Source§

fn style(&self, style: Style) -> Styled<&Self>

Apply a runtime-determined style
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.