Struct ex3_node_types::number::Ex3Uint

pub struct Ex3Uint(pub BigUint);

Tuple Fields

0: BigUint

Trait Implementations

impl Add<BigUint> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the + operator.

fn add(self, rhs: BigUint) -> Self::Output

Performs the + operation.

impl Add<u128> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the + operator.

fn add(self, rhs: u128) -> Self::Output

Performs the + operation.

impl Add<u16> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the + operator.

fn add(self, rhs: u16) -> Self::Output

Performs the + operation.

impl Add<u32> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the + operator.

fn add(self, rhs: u32) -> Self::Output

Performs the + operation.

impl Add<u64> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the + operator.

fn add(self, rhs: u64) -> Self::Output

Performs the + operation.

impl Add<u8> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the + operator.

fn add(self, rhs: u8) -> Self::Output

Performs the + operation.

impl Add<usize> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the + operator.

fn add(self, rhs: usize) -> Self::Output

Performs the + operation.

impl Add for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the + operator.

fn add(self, rhs: Self) -> Self::Output

Performs the + operation.

impl AddAssign<BigUint> for Ex3Uint

fn add_assign(&mut self, rhs: BigUint)

Performs the += operation.

impl AddAssign<u128> for Ex3Uint

fn add_assign(&mut self, rhs: u128)

Performs the += operation.

impl AddAssign<u16> for Ex3Uint

fn add_assign(&mut self, rhs: u16)

Performs the += operation.

impl AddAssign<u32> for Ex3Uint

fn add_assign(&mut self, rhs: u32)

Performs the += operation.

impl AddAssign<u64> for Ex3Uint

fn add_assign(&mut self, rhs: u64)

Performs the += operation.

impl AddAssign<u8> for Ex3Uint

fn add_assign(&mut self, rhs: u8)

Performs the += operation.

impl AddAssign<usize> for Ex3Uint

fn add_assign(&mut self, rhs: usize)

Performs the += operation.

impl AddAssign for Ex3Uint

fn add_assign(&mut self, rhs: Self)

Performs the += operation.

impl CheckedAdd for Ex3Uint

fn checked_add(&self, rhs: &Self) -> Option<Self>

Adds two numbers, checking for overflow. If overflow happens, None is returned.

impl CheckedDiv for Ex3Uint

fn checked_div(&self, rhs: &Self) -> Option<Self>

Divides two numbers, checking for underflow, overflow and division by zero. If any of that happens, None is returned.

impl CheckedMul for Ex3Uint

fn checked_mul(&self, rhs: &Self) -> Option<Self>

Multiplies two numbers, checking for underflow or overflow. If underflow or overflow happens, None is returned.

impl CheckedSub for Ex3Uint

fn checked_sub(&self, rhs: &Self) -> Option<Self>

Subtracts two numbers, checking for underflow. If underflow happens, None is returned.

impl Clone for Ex3Uint

fn clone(&self) -> Ex3Uint

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Ex3Uint

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Ex3Uint

fn default() -> Ex3Uint

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for Ex3Uint

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for Ex3Uint

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Div<BigUint> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the / operator.

fn div(self, rhs: BigUint) -> Self::Output

Performs the / operation.

impl Div<u128> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the / operator.

fn div(self, rhs: u128) -> Self::Output

Performs the / operation.

impl Div<u16> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the / operator.

fn div(self, rhs: u16) -> Self::Output

Performs the / operation.

impl Div<u32> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the / operator.

fn div(self, rhs: u32) -> Self::Output

Performs the / operation.

impl Div<u64> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the / operator.

fn div(self, rhs: u64) -> Self::Output

Performs the / operation.

impl Div<u8> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the / operator.

fn div(self, rhs: u8) -> Self::Output

Performs the / operation.

impl Div<usize> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the / operator.

fn div(self, rhs: usize) -> Self::Output

Performs the / operation.

impl Div for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the / operator.

fn div(self, rhs: Self) -> Self::Output

Performs the / operation.

impl DivAssign<BigUint> for Ex3Uint

fn div_assign(&mut self, rhs: BigUint)

Performs the /= operation.

impl DivAssign<u128> for Ex3Uint

fn div_assign(&mut self, rhs: u128)

Performs the /= operation.

impl DivAssign<u16> for Ex3Uint

fn div_assign(&mut self, rhs: u16)

Performs the /= operation.

impl DivAssign<u32> for Ex3Uint

fn div_assign(&mut self, rhs: u32)

Performs the /= operation.

impl DivAssign<u64> for Ex3Uint

fn div_assign(&mut self, rhs: u64)

Performs the /= operation.

impl DivAssign<u8> for Ex3Uint

fn div_assign(&mut self, rhs: u8)

Performs the /= operation.

impl DivAssign<usize> for Ex3Uint

fn div_assign(&mut self, rhs: usize)

Performs the /= operation.

impl DivAssign for Ex3Uint

fn div_assign(&mut self, rhs: Self)

Performs the /= operation.

impl From<BigUint> for Ex3Uint

fn from(value: BigUint) -> Self

Converts to this type from the input type.

impl From<Ex3Uint> for BigUint

fn from(value: Ex3Uint) -> Self

Converts to this type from the input type.

impl From<Ex3Uint> for Nat

fn from(value: Ex3Uint) -> Self

Converts to this type from the input type.

impl From<Nat> for Ex3Uint

fn from(value: Nat) -> Self

Converts to this type from the input type.

impl From<u128> for Ex3Uint

fn from(value: u128) -> Self

Converts to this type from the input type.

impl From<u16> for Ex3Uint

fn from(value: u16) -> Self

Converts to this type from the input type.

impl From<u32> for Ex3Uint

fn from(value: u32) -> Self

Converts to this type from the input type.

impl From<u64> for Ex3Uint

fn from(value: u64) -> Self

Converts to this type from the input type.

impl From<u8> for Ex3Uint

fn from(value: u8) -> Self

Converts to this type from the input type.

impl From<usize> for Ex3Uint

fn from(value: usize) -> Self

Converts to this type from the input type.

impl Hash for Ex3Uint

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Mul<BigUint> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the * operator.

fn mul(self, rhs: BigUint) -> Self::Output

Performs the * operation.

impl Mul<u128> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the * operator.

fn mul(self, rhs: u128) -> Self::Output

Performs the * operation.

impl Mul<u16> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the * operator.

fn mul(self, rhs: u16) -> Self::Output

Performs the * operation.

impl Mul<u32> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the * operator.

fn mul(self, rhs: u32) -> Self::Output

Performs the * operation.

impl Mul<u64> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the * operator.

fn mul(self, rhs: u64) -> Self::Output

Performs the * operation.

impl Mul<u8> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the * operator.

fn mul(self, rhs: u8) -> Self::Output

Performs the * operation.

impl Mul<usize> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the * operator.

fn mul(self, rhs: usize) -> Self::Output

Performs the * operation.

impl Mul for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the * operator.

fn mul(self, rhs: Self) -> Self::Output

Performs the * operation.

impl MulAssign<BigUint> for Ex3Uint

fn mul_assign(&mut self, rhs: BigUint)

Performs the *= operation.

impl MulAssign<u128> for Ex3Uint

fn mul_assign(&mut self, rhs: u128)

Performs the *= operation.

impl MulAssign<u16> for Ex3Uint

fn mul_assign(&mut self, rhs: u16)

Performs the *= operation.

impl MulAssign<u32> for Ex3Uint

fn mul_assign(&mut self, rhs: u32)

Performs the *= operation.

impl MulAssign<u64> for Ex3Uint

fn mul_assign(&mut self, rhs: u64)

Performs the *= operation.

impl MulAssign<u8> for Ex3Uint

fn mul_assign(&mut self, rhs: u8)

Performs the *= operation.

impl MulAssign<usize> for Ex3Uint

fn mul_assign(&mut self, rhs: usize)

Performs the *= operation.

impl MulAssign for Ex3Uint

fn mul_assign(&mut self, rhs: Self)

Performs the *= operation.

impl One for Ex3Uint

fn one() -> Self

Returns the multiplicative identity element of Self, 1.

fn set_one(&mut self)

Sets self to the multiplicative identity element of Self, 1.

fn is_one(&self) -> bool

where Self: PartialEq,

Returns true if self is equal to the multiplicative identity.

impl Ord for Ex3Uint

fn cmp(&self, other: &Ex3Uint) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq<BigUint> for Ex3Uint

fn eq(&self, other: &BigUint) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Ex3Uint> for BigUint

fn eq(&self, other: &Ex3Uint) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Ex3Uint> for Nat

fn eq(&self, other: &Ex3Uint) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Nat> for Ex3Uint

fn eq(&self, other: &Nat) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u128> for Ex3Uint

fn eq(&self, other: &u128) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u16> for Ex3Uint

fn eq(&self, other: &u16) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u32> for Ex3Uint

fn eq(&self, other: &u32) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u64> for Ex3Uint

fn eq(&self, other: &u64) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u8> for Ex3Uint

fn eq(&self, other: &u8) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<usize> for Ex3Uint

fn eq(&self, other: &usize) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for Ex3Uint

fn eq(&self, other: &Ex3Uint) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<BigUint> for Ex3Uint

fn partial_cmp(&self, other: &BigUint) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Ex3Uint> for BigUint

fn partial_cmp(&self, other: &Ex3Uint) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Ex3Uint> for Nat

fn partial_cmp(&self, other: &Ex3Uint) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Nat> for Ex3Uint

fn partial_cmp(&self, other: &Nat) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u128> for Ex3Uint

fn partial_cmp(&self, other: &u128) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u16> for Ex3Uint

fn partial_cmp(&self, other: &u16) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u32> for Ex3Uint

fn partial_cmp(&self, other: &u32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u64> for Ex3Uint

fn partial_cmp(&self, other: &u64) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u8> for Ex3Uint

fn partial_cmp(&self, other: &u8) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<usize> for Ex3Uint

fn partial_cmp(&self, other: &usize) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd for Ex3Uint

fn partial_cmp(&self, other: &Ex3Uint) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Pow<u128> for Ex3Uint

type Output = Ex3Uint

The result after applying the operator.

fn pow(self, rhs: u128) -> Self::Output

Returns self to the power rhs.

impl Pow<u16> for Ex3Uint

type Output = Ex3Uint

The result after applying the operator.

fn pow(self, rhs: u16) -> Self::Output

Returns self to the power rhs.

impl Pow<u32> for Ex3Uint

type Output = Ex3Uint

The result after applying the operator.

fn pow(self, rhs: u32) -> Self::Output

Returns self to the power rhs.

impl Pow<u64> for Ex3Uint

type Output = Ex3Uint

The result after applying the operator.

fn pow(self, rhs: u64) -> Self::Output

Returns self to the power rhs.

impl Pow<u8> for Ex3Uint

type Output = Ex3Uint

The result after applying the operator.

fn pow(self, rhs: u8) -> Self::Output

Returns self to the power rhs.

impl Pow<usize> for Ex3Uint

type Output = Ex3Uint

The result after applying the operator.

fn pow(self, rhs: usize) -> Self::Output

Returns self to the power rhs.

impl Rem<BigUint> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the % operator.

fn rem(self, rhs: BigUint) -> Self::Output

Performs the % operation.

impl Rem<u128> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the % operator.

fn rem(self, rhs: u128) -> Self::Output

Performs the % operation.

impl Rem<u16> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the % operator.

fn rem(self, rhs: u16) -> Self::Output

Performs the % operation.

impl Rem<u32> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the % operator.

fn rem(self, rhs: u32) -> Self::Output

Performs the % operation.

impl Rem<u64> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the % operator.

fn rem(self, rhs: u64) -> Self::Output

Performs the % operation.

impl Rem<u8> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the % operator.

fn rem(self, rhs: u8) -> Self::Output

Performs the % operation.

impl Rem<usize> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the % operator.

fn rem(self, rhs: usize) -> Self::Output

Performs the % operation.

impl Rem for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the % operator.

fn rem(self, rhs: Self) -> Self::Output

Performs the % operation.

impl RemAssign<BigUint> for Ex3Uint

fn rem_assign(&mut self, rhs: BigUint)

Performs the %= operation.

impl RemAssign<u128> for Ex3Uint

fn rem_assign(&mut self, rhs: u128)

Performs the %= operation.

impl RemAssign<u16> for Ex3Uint

fn rem_assign(&mut self, rhs: u16)

Performs the %= operation.

impl RemAssign<u32> for Ex3Uint

fn rem_assign(&mut self, rhs: u32)

Performs the %= operation.

impl RemAssign<u64> for Ex3Uint

fn rem_assign(&mut self, rhs: u64)

Performs the %= operation.

impl RemAssign<u8> for Ex3Uint

fn rem_assign(&mut self, rhs: u8)

Performs the %= operation.

impl RemAssign<usize> for Ex3Uint

fn rem_assign(&mut self, rhs: usize)

Performs the %= operation.

impl RemAssign for Ex3Uint

fn rem_assign(&mut self, rhs: Self)

Performs the %= operation.

impl Serialize for Ex3Uint

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl Step for Ex3Uint

fn steps_between(start: &Self, end: &Self) -> Option<usize>

🔬This is a nightly-only experimental API. (step_trait)

Returns the number of successor steps required to get from start to end.

fn forward_checked(start: Self, count: usize) -> Option<Self>

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the successor of self count times.

fn backward_checked(start: Self, count: usize) -> Option<Self>

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the predecessor of self count times.

fn forward(start: Self, count: usize) -> Self

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the successor of self count times.

unsafe fn forward_unchecked(start: Self, count: usize) -> Self

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the successor of self count times.

fn backward(start: Self, count: usize) -> Self

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the predecessor of self count times.

unsafe fn backward_unchecked(start: Self, count: usize) -> Self

🔬This is a nightly-only experimental API. (step_trait)

Returns the value that would be obtained by taking the predecessor of self count times.

impl Storable for Ex3Uint

fn to_bytes(&self) -> Cow<'_, [u8]>

Converts an element into bytes.

fn from_bytes(bytes: Cow<'_, [u8]>) -> Self

Converts bytes into an element.

const BOUND: Bound = _

The size bounds of the type.

fn to_bytes_checked(&self) -> Cow<'_, [u8]>

Like to_bytes, but includes additional checks to ensure the element’s serialized bytes are within the element’s bounds.

impl Sub<BigUint> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the - operator.

fn sub(self, rhs: BigUint) -> Self::Output

Performs the - operation.

impl Sub<u128> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the - operator.

fn sub(self, rhs: u128) -> Self::Output

Performs the - operation.

impl Sub<u16> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the - operator.

fn sub(self, rhs: u16) -> Self::Output

Performs the - operation.

impl Sub<u32> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the - operator.

fn sub(self, rhs: u32) -> Self::Output

Performs the - operation.

impl Sub<u64> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the - operator.

fn sub(self, rhs: u64) -> Self::Output

Performs the - operation.

impl Sub<u8> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the - operator.

fn sub(self, rhs: u8) -> Self::Output

Performs the - operation.

impl Sub<usize> for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the - operator.

fn sub(self, rhs: usize) -> Self::Output

Performs the - operation.

impl Sub for Ex3Uint

type Output = Ex3Uint

The resulting type after applying the - operator.

fn sub(self, rhs: Self) -> Self::Output

Performs the - operation.

impl SubAssign<BigUint> for Ex3Uint

fn sub_assign(&mut self, rhs: BigUint)

Performs the -= operation.

impl SubAssign<u128> for Ex3Uint

fn sub_assign(&mut self, rhs: u128)

Performs the -= operation.

impl SubAssign<u16> for Ex3Uint

fn sub_assign(&mut self, rhs: u16)

Performs the -= operation.

impl SubAssign<u32> for Ex3Uint

fn sub_assign(&mut self, rhs: u32)

Performs the -= operation.

impl SubAssign<u64> for Ex3Uint

fn sub_assign(&mut self, rhs: u64)

Performs the -= operation.

impl SubAssign<u8> for Ex3Uint

fn sub_assign(&mut self, rhs: u8)

Performs the -= operation.

impl SubAssign<usize> for Ex3Uint

fn sub_assign(&mut self, rhs: usize)

Performs the -= operation.

impl SubAssign for Ex3Uint

fn sub_assign(&mut self, rhs: Self)

Performs the -= operation.

impl Zero for Ex3Uint

fn zero() -> Self

Returns the additive identity element of Self, 0.

fn is_zero(&self) -> bool

Returns true if self is equal to the additive identity.

fn set_zero(&mut self)

Sets self to the additive identity element of Self, 0.

impl Eq for Ex3Uint

impl StructuralEq for Ex3Uint

impl StructuralPartialEq for Ex3Uint