[−][src]Struct euclid::Size3D
A 3d size tagged with a unit.
Fields
width: T
height: T
depth: T
Methods
impl<T, U> Size3D<T, U>
[src]
impl<T: Clone, U> Size3D<T, U>
[src]
pub fn from_lengths(
width: Length<T, U>,
height: Length<T, U>,
depth: Length<T, U>
) -> Self
[src]
width: Length<T, U>,
height: Length<T, U>,
depth: Length<T, U>
) -> Self
Constructor taking scalar strongly typed lengths.
impl<T: Round, U> Size3D<T, U>
[src]
pub fn round(&self) -> Self
[src]
Rounds each component to the nearest integer value.
This behavior is preserved for negative values (unlike the basic cast).
impl<T: Ceil, U> Size3D<T, U>
[src]
pub fn ceil(&self) -> Self
[src]
Rounds each component to the smallest integer equal or greater than the original value.
This behavior is preserved for negative values (unlike the basic cast).
impl<T: Floor, U> Size3D<T, U>
[src]
pub fn floor(&self) -> Self
[src]
Rounds each component to the biggest integer equal or lower than the original value.
This behavior is preserved for negative values (unlike the basic cast).
impl<T: Copy + Clone + Mul<T, Output = T>, U> Size3D<T, U>
[src]
impl<T, U> Size3D<T, U> where
T: Copy + One + Add<Output = T> + Sub<Output = T> + Mul<Output = T>,
[src]
T: Copy + One + Add<Output = T> + Sub<Output = T> + Mul<Output = T>,
pub fn lerp(&self, other: Self, t: T) -> Self
[src]
Linearly interpolate between this size and another size.
t
is expected to be between zero and one.
impl<T: Zero + PartialOrd, U> Size3D<T, U>
[src]
pub fn is_empty_or_negative(&self) -> bool
[src]
impl<T: Zero, U> Size3D<T, U>
[src]
impl<T: Copy, U> Size3D<T, U>
[src]
pub fn to_array(&self) -> [T; 3]
[src]
Returns self.width as a Length carrying the unit.
pub fn to_vector(&self) -> Vector3D<T, U>
[src]
pub fn to_untyped(&self) -> Size3D<T, UnknownUnit>
[src]
Drop the units, preserving only the numeric value.
pub fn from_untyped(p: Size3D<T, UnknownUnit>) -> Self
[src]
Tag a unitless value with units.
impl<T: NumCast + Copy, Unit> Size3D<T, Unit>
[src]
pub fn cast<NewT: NumCast + Copy>(&self) -> Size3D<NewT, Unit>
[src]
Cast from one numeric representation to another, preserving the units.
When casting from floating point to integer coordinates, the decimals are truncated
as one would expect from a simple cast, but this behavior does not always make sense
geometrically. Consider using round()
, ceil()
or floor()
before casting.
pub fn try_cast<NewT: NumCast + Copy>(&self) -> Option<Size3D<NewT, Unit>>
[src]
Fallible cast from one numeric representation to another, preserving the units.
When casting from floating point to integer coordinates, the decimals are truncated
as one would expect from a simple cast, but this behavior does not always make sense
geometrically. Consider using round()
, ceil()
or floor()
before casting.
pub fn to_f32(&self) -> Size3D<f32, Unit>
[src]
Cast into an f32
size.
pub fn to_f64(&self) -> Size3D<f64, Unit>
[src]
Cast into an f64
size.
pub fn to_usize(&self) -> Size3D<usize, Unit>
[src]
Cast into an uint
size, truncating decimals if any.
When casting from floating point sizes, it is worth considering whether
to round()
, ceil()
or floor()
before the cast in order to obtain
the desired conversion behavior.
pub fn to_u32(&self) -> Size3D<u32, Unit>
[src]
Cast into an u32
size, truncating decimals if any.
When casting from floating point sizes, it is worth considering whether
to round()
, ceil()
or floor()
before the cast in order to obtain
the desired conversion behavior.
pub fn to_i32(&self) -> Size3D<i32, Unit>
[src]
Cast into an i32
size, truncating decimals if any.
When casting from floating point sizes, it is worth considering whether
to round()
, ceil()
or floor()
before the cast in order to obtain
the desired conversion behavior.
pub fn to_i64(&self) -> Size3D<i64, Unit>
[src]
Cast into an i64
size, truncating decimals if any.
When casting from floating point sizes, it is worth considering whether
to round()
, ceil()
or floor()
before the cast in order to obtain
the desired conversion behavior.
impl<T, U> Size3D<T, U> where
T: Signed,
[src]
T: Signed,
pub fn abs(&self) -> Self
[src]
pub fn is_positive(&self) -> bool
[src]
impl<T: PartialOrd, U> Size3D<T, U>
[src]
pub fn greater_than(&self, other: Self) -> BoolVector3D
[src]
pub fn lower_than(&self, other: Self) -> BoolVector3D
[src]
impl<T: PartialEq, U> Size3D<T, U>
[src]
pub fn equal(&self, other: Self) -> BoolVector3D
[src]
pub fn not_equal(&self, other: Self) -> BoolVector3D
[src]
impl<T: Float, U> Size3D<T, U>
[src]
pub fn min(self, other: Self) -> Self
[src]
pub fn max(self, other: Self) -> Self
[src]
pub fn clamp(&self, start: Self, end: Self) -> Self
[src]
Trait Implementations
impl<T: Zero, U> Zero for Size3D<T, U>
[src]
impl<T: Debug, U> Debug for Size3D<T, U>
[src]
impl<T: Display, U> Display for Size3D<T, U>
[src]
impl<T, U> PartialEq<Size3D<T, U>> for Size3D<T, U> where
T: PartialEq,
[src]
T: PartialEq,
fn eq(&self, other: &Self) -> bool
[src]
#[must_use]
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests for !=
.
impl<T, U> Eq for Size3D<T, U> where
T: Eq,
[src]
T: Eq,
impl<T: Copy + Add<T, Output = T>, U> Add<Size3D<T, U>> for Size3D<T, U>
[src]
type Output = Self
The resulting type after applying the +
operator.
fn add(self, other: Self) -> Self
[src]
impl<T: Copy + Sub<T, Output = T>, U> Sub<Size3D<T, U>> for Size3D<T, U>
[src]
type Output = Self
The resulting type after applying the -
operator.
fn sub(self, other: Self) -> Self
[src]
impl<T: Copy + Mul<T, Output = T>, U> Mul<T> for Size3D<T, U>
[src]
type Output = Self
The resulting type after applying the *
operator.
fn mul(self, scale: T) -> Self
[src]
impl<T: Copy + Mul<T, Output = T>, U1, U2> Mul<Scale<T, U1, U2>> for Size3D<T, U1>
[src]
type Output = Size3D<T, U2>
The resulting type after applying the *
operator.
fn mul(self, scale: Scale<T, U1, U2>) -> Size3D<T, U2>
[src]
impl<T: Copy + Div<T, Output = T>, U> Div<T> for Size3D<T, U>
[src]
type Output = Self
The resulting type after applying the /
operator.
fn div(self, scale: T) -> Self
[src]
impl<T: Copy + Div<T, Output = T>, U1, U2> Div<Scale<T, U1, U2>> for Size3D<T, U2>
[src]
type Output = Size3D<T, U1>
The resulting type after applying the /
operator.
fn div(self, scale: Scale<T, U1, U2>) -> Size3D<T, U1>
[src]
impl<T, U> Hash for Size3D<T, U> where
T: Hash,
[src]
T: Hash,
fn hash<H: Hasher>(&self, h: &mut H)
[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl<T: Copy, U> Copy for Size3D<T, U>
[src]
impl<T, U> From<Size3D<T, U>> for Box3D<T, U> where
T: Copy + Zero + PartialOrd,
[src]
T: Copy + Zero + PartialOrd,
impl<T: Clone, U> Clone for Size3D<T, U>
[src]
fn clone(&self) -> Self
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl<T: Default, U> Default for Size3D<T, U>
[src]
Auto Trait Implementations
impl<T, U> Unpin for Size3D<T, U> where
T: Unpin,
U: Unpin,
T: Unpin,
U: Unpin,
impl<T, U> Sync for Size3D<T, U> where
T: Sync,
U: Sync,
T: Sync,
U: Sync,
impl<T, U> Send for Size3D<T, U> where
T: Send,
U: Send,
T: Send,
U: Send,
impl<T, U> UnwindSafe for Size3D<T, U> where
T: UnwindSafe,
U: UnwindSafe,
T: UnwindSafe,
U: UnwindSafe,
impl<T, U> RefUnwindSafe for Size3D<T, U> where
T: RefUnwindSafe,
U: RefUnwindSafe,
T: RefUnwindSafe,
U: RefUnwindSafe,
Blanket Implementations
impl<T> Zero for T where
T: Zero,
[src]
T: Zero,
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T> ToString for T where
T: Display + ?Sized,
[src]
T: Display + ?Sized,