Struct esp8266::generic::R

pub struct R<REG: RegisterSpec + ?Sized> { /* fields omitted */ }

Register reader.

Result of the read methods of registers. Also used as a closure argument in the modify method.

Implementations

impl<REG: RegisterSpec> R<REG>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl From<R<COUNT_SPEC>> for R

fn from(reader: R<COUNT_SPEC>) -> Self

Performs the conversion.

impl From<R<DPORT_CTL_SPEC>> for R

fn from(reader: R<DPORT_CTL_SPEC>) -> Self

Performs the conversion.

impl From<R<EDGE_INT_ENABLE_SPEC>> for R

fn from(reader: R<EDGE_INT_ENABLE_SPEC>) -> Self

Performs the conversion.

impl From<R<EFUSE_DATA0_SPEC>> for R

fn from(reader: R<EFUSE_DATA0_SPEC>) -> Self

Performs the conversion.

impl From<R<EFUSE_DATA1_SPEC>> for R

fn from(reader: R<EFUSE_DATA1_SPEC>) -> Self

Performs the conversion.

impl From<R<EFUSE_DATA2_SPEC>> for R

fn from(reader: R<EFUSE_DATA2_SPEC>) -> Self

Performs the conversion.

impl From<R<EFUSE_DATA3_SPEC>> for R

fn from(reader: R<EFUSE_DATA3_SPEC>) -> Self

Performs the conversion.

impl From<R<FRC1_COUNT_SPEC>> for R

fn from(reader: R<FRC1_COUNT_SPEC>) -> Self

Performs the conversion.

impl From<R<FRC1_CTRL_SPEC>> for R

fn from(reader: R<FRC1_CTRL_SPEC>) -> Self

Performs the conversion.

impl From<R<FRC1_INT_SPEC>> for R

fn from(reader: R<FRC1_INT_SPEC>) -> Self

Performs the conversion.

impl From<R<FRC1_LOAD_SPEC>> for R

fn from(reader: R<FRC1_LOAD_SPEC>) -> Self

Performs the conversion.

impl From<R<FRC2_ALARM_SPEC>> for R

fn from(reader: R<FRC2_ALARM_SPEC>) -> Self

Performs the conversion.

impl From<R<FRC2_COUNT_SPEC>> for R

fn from(reader: R<FRC2_COUNT_SPEC>) -> Self

Performs the conversion.

impl From<R<FRC2_CTRL_SPEC>> for R

fn from(reader: R<FRC2_CTRL_SPEC>) -> Self

Performs the conversion.

impl From<R<FRC2_INT_SPEC>> for R

fn from(reader: R<FRC2_INT_SPEC>) -> Self

Performs the conversion.

impl From<R<FRC2_LOAD_SPEC>> for R

fn from(reader: R<FRC2_LOAD_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_ENABLE_SPEC>> for R

fn from(reader: R<GPIO_ENABLE_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_IN_SPEC>> for R

fn from(reader: R<GPIO_IN_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_OUT_SPEC>> for R

fn from(reader: R<GPIO_OUT_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN0_SPEC>> for R

fn from(reader: R<GPIO_PIN0_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN10_SPEC>> for R

fn from(reader: R<GPIO_PIN10_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN11_SPEC>> for R

fn from(reader: R<GPIO_PIN11_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN12_SPEC>> for R

fn from(reader: R<GPIO_PIN12_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN13_SPEC>> for R

fn from(reader: R<GPIO_PIN13_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN14_SPEC>> for R

fn from(reader: R<GPIO_PIN14_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN15_SPEC>> for R

fn from(reader: R<GPIO_PIN15_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN1_SPEC>> for R

fn from(reader: R<GPIO_PIN1_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN2_SPEC>> for R

fn from(reader: R<GPIO_PIN2_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN3_SPEC>> for R

fn from(reader: R<GPIO_PIN3_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN4_SPEC>> for R

fn from(reader: R<GPIO_PIN4_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN5_SPEC>> for R

fn from(reader: R<GPIO_PIN5_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN6_SPEC>> for R

fn from(reader: R<GPIO_PIN6_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN7_SPEC>> for R

fn from(reader: R<GPIO_PIN7_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN8_SPEC>> for R

fn from(reader: R<GPIO_PIN8_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_PIN9_SPEC>> for R

fn from(reader: R<GPIO_PIN9_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_RTC_CALIB_SYNC_SPEC>> for R

fn from(reader: R<GPIO_RTC_CALIB_SYNC_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_RTC_CALIB_VALUE_SPEC>> for R

fn from(reader: R<GPIO_RTC_CALIB_VALUE_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_SIGMA_DELTA_SPEC>> for R

fn from(reader: R<GPIO_SIGMA_DELTA_SPEC>) -> Self

Performs the conversion.

impl From<R<GPIO_STATUS_SPEC>> for R

fn from(reader: R<GPIO_STATUS_SPEC>) -> Self

Performs the conversion.

impl From<R<I2SCONF_SIGLE_DATA_SPEC>> for R

fn from(reader: R<I2SCONF_SIGLE_DATA_SPEC>) -> Self

Performs the conversion.

impl From<R<I2SCONF_SPEC>> for R

fn from(reader: R<I2SCONF_SPEC>) -> Self

Performs the conversion.

impl From<R<I2SINT_CLR_SPEC>> for R

fn from(reader: R<I2SINT_CLR_SPEC>) -> Self

Performs the conversion.

impl From<R<I2SINT_ENA_SPEC>> for R

fn from(reader: R<I2SINT_ENA_SPEC>) -> Self

Performs the conversion.

impl From<R<I2SINT_RAW_SPEC>> for R

fn from(reader: R<I2SINT_RAW_SPEC>) -> Self

Performs the conversion.

impl From<R<I2SINT_ST_SPEC>> for R

fn from(reader: R<I2SINT_ST_SPEC>) -> Self

Performs the conversion.

impl From<R<I2SRXEOF_NUM_SPEC>> for R

fn from(reader: R<I2SRXEOF_NUM_SPEC>) -> Self

Performs the conversion.

impl From<R<I2SRXFIFO_SPEC>> for R

fn from(reader: R<I2SRXFIFO_SPEC>) -> Self

Performs the conversion.

impl From<R<I2STIMING_SPEC>> for R

fn from(reader: R<I2STIMING_SPEC>) -> Self

Performs the conversion.

impl From<R<I2STXFIFO_SPEC>> for R

fn from(reader: R<I2STXFIFO_SPEC>) -> Self

Performs the conversion.

impl From<R<I2S_FIFO_CONF_SPEC>> for R

fn from(reader: R<I2S_FIFO_CONF_SPEC>) -> Self

Performs the conversion.

impl From<R<IOSWAP_SPEC>> for R

fn from(reader: R<IOSWAP_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_CONF_SPEC>> for R

fn from(reader: R<IO_MUX_CONF_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_GPIO0_SPEC>> for R

fn from(reader: R<IO_MUX_GPIO0_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_GPIO2_SPEC>> for R

fn from(reader: R<IO_MUX_GPIO2_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_GPIO4_SPEC>> for R

fn from(reader: R<IO_MUX_GPIO4_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_GPIO5_SPEC>> for R

fn from(reader: R<IO_MUX_GPIO5_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_MTCK_SPEC>> for R

fn from(reader: R<IO_MUX_MTCK_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_MTDI_SPEC>> for R

fn from(reader: R<IO_MUX_MTDI_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_MTDO_SPEC>> for R

fn from(reader: R<IO_MUX_MTDO_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_MTMS_SPEC>> for R

fn from(reader: R<IO_MUX_MTMS_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_SD_CLK_SPEC>> for R

fn from(reader: R<IO_MUX_SD_CLK_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_SD_CMD_SPEC>> for R

fn from(reader: R<IO_MUX_SD_CMD_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_SD_DATA0_SPEC>> for R

fn from(reader: R<IO_MUX_SD_DATA0_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_SD_DATA1_SPEC>> for R

fn from(reader: R<IO_MUX_SD_DATA1_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_SD_DATA2_SPEC>> for R

fn from(reader: R<IO_MUX_SD_DATA2_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_SD_DATA3_SPEC>> for R

fn from(reader: R<IO_MUX_SD_DATA3_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_U0RXD_SPEC>> for R

fn from(reader: R<IO_MUX_U0RXD_SPEC>) -> Self

Performs the conversion.

impl From<R<IO_MUX_U0TXD_SPEC>> for R

fn from(reader: R<IO_MUX_U0TXD_SPEC>) -> Self

Performs the conversion.

impl From<R<PAD_XPD_DCDC_CONF_SPEC>> for R

fn from(reader: R<PAD_XPD_DCDC_CONF_SPEC>) -> Self

Performs the conversion.

impl From<R<PLL_SPEC>> for R

fn from(reader: R<PLL_SPEC>) -> Self

Performs the conversion.

impl From<R<RESET_STAGE_SPEC>> for R

fn from(reader: R<RESET_STAGE_SPEC>) -> Self

Performs the conversion.

impl From<R<RNG_SPEC>> for R

fn from(reader: R<RNG_SPEC>) -> Self

Performs the conversion.

impl From<R<RTC_GPIO_CONF_SPEC>> for R

fn from(reader: R<RTC_GPIO_CONF_SPEC>) -> Self

Performs the conversion.

impl From<R<RTC_GPIO_ENABLE_SPEC>> for R

fn from(reader: R<RTC_GPIO_ENABLE_SPEC>) -> Self

Performs the conversion.

impl From<R<RTC_GPIO_IN_DATA_SPEC>> for R

fn from(reader: R<RTC_GPIO_IN_DATA_SPEC>) -> Self

Performs the conversion.

impl From<R<RTC_GPIO_OUT_SPEC>> for R

fn from(reader: R<RTC_GPIO_OUT_SPEC>) -> Self

Performs the conversion.

impl From<R<RTC_STATE1_SPEC>> for R

fn from(reader: R<RTC_STATE1_SPEC>) -> Self

Performs the conversion.

impl From<R<RTC_STORE0_SPEC>> for R

fn from(reader: R<RTC_STORE0_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_AHB_TEST_SPEC>> for R

fn from(reader: R<SLC_AHB_TEST_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_BRIDGE_CONF_SPEC>> for R

fn from(reader: R<SLC_BRIDGE_CONF_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_CONF0_SPEC>> for R

fn from(reader: R<SLC_CONF0_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_CONF1_SPEC>> for R

fn from(reader: R<SLC_CONF1_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_DATE_SPEC>> for R

fn from(reader: R<SLC_DATE_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_ID_SPEC>> for R

fn from(reader: R<SLC_ID_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_INTVEC_TOHOST_SPEC>> for R

fn from(reader: R<SLC_INTVEC_TOHOST_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_INT_CLR_SPEC>> for R

fn from(reader: R<SLC_INT_CLR_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_INT_ENA_SPEC>> for R

fn from(reader: R<SLC_INT_ENA_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_INT_RAW_SPEC>> for R

fn from(reader: R<SLC_INT_RAW_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_INT_STATUS_SPEC>> for R

fn from(reader: R<SLC_INT_STATUS_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_RXLINK_DSCR_BF0_SPEC>> for R

fn from(reader: R<SLC_RXLINK_DSCR_BF0_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_RXLINK_DSCR_BF1_SPEC>> for R

fn from(reader: R<SLC_RXLINK_DSCR_BF1_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_RXLINK_DSCR_SPEC>> for R

fn from(reader: R<SLC_RXLINK_DSCR_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_RX_DSCR_CONF_SPEC>> for R

fn from(reader: R<SLC_RX_DSCR_CONF_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_RX_EOF_BFR_DES_ADDR_SPEC>> for R

fn from(reader: R<SLC_RX_EOF_BFR_DES_ADDR_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_RX_EOF_DES_ADDR_SPEC>> for R

fn from(reader: R<SLC_RX_EOF_DES_ADDR_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_RX_FIFO_PUSH_SPEC>> for R

fn from(reader: R<SLC_RX_FIFO_PUSH_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_RX_LINK_SPEC>> for R

fn from(reader: R<SLC_RX_LINK_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_RX_STATUS_SPEC>> for R

fn from(reader: R<SLC_RX_STATUS_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_SDIO_ST_SPEC>> for R

fn from(reader: R<SLC_SDIO_ST_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_STATE0_SPEC>> for R

fn from(reader: R<SLC_STATE0_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_STATE1_SPEC>> for R

fn from(reader: R<SLC_STATE1_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_TOKEN0_SPEC>> for R

fn from(reader: R<SLC_TOKEN0_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_TOKEN1_SPEC>> for R

fn from(reader: R<SLC_TOKEN1_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_TXLINK_DSCR_BF0_SPEC>> for R

fn from(reader: R<SLC_TXLINK_DSCR_BF0_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_TXLINK_DSCR_BF1_SPEC>> for R

fn from(reader: R<SLC_TXLINK_DSCR_BF1_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_TXLINK_DSCR_SPEC>> for R

fn from(reader: R<SLC_TXLINK_DSCR_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_TX_EOF_DES_ADDR_SPEC>> for R

fn from(reader: R<SLC_TX_EOF_DES_ADDR_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_TX_FIFO_POP_SPEC>> for R

fn from(reader: R<SLC_TX_FIFO_POP_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_TX_LINK_SPEC>> for R

fn from(reader: R<SLC_TX_LINK_SPEC>) -> Self

Performs the conversion.

impl From<R<SLC_TX_STATUS_SPEC>> for R

fn from(reader: R<SLC_TX_STATUS_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_ADDR_SPEC>> for R

fn from(reader: R<SPI_ADDR_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_ADDR_SPEC>> for R

fn from(reader: R<SPI_ADDR_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CACHE_SPEC>> for R

fn from(reader: R<SPI_CACHE_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CACHE_TARGET_SPEC>> for R

fn from(reader: R<SPI_CACHE_TARGET_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CLOCK_SPEC>> for R

fn from(reader: R<SPI_CLOCK_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CLOCK_SPEC>> for R

fn from(reader: R<SPI_CLOCK_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CMD_SPEC>> for R

fn from(reader: R<SPI_CMD_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CMD_SPEC>> for R

fn from(reader: R<SPI_CMD_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CTRL1_SPEC>> for R

fn from(reader: R<SPI_CTRL1_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CTRL1_SPEC>> for R

fn from(reader: R<SPI_CTRL1_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CTRL2_SPEC>> for R

fn from(reader: R<SPI_CTRL2_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CTRL2_SPEC>> for R

fn from(reader: R<SPI_CTRL2_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CTRL_SPEC>> for R

fn from(reader: R<SPI_CTRL_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_CTRL_SPEC>> for R

fn from(reader: R<SPI_CTRL_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_EXT0_SPEC>> for R

fn from(reader: R<SPI_EXT0_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_EXT0_SPEC>> for R

fn from(reader: R<SPI_EXT0_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_EXT1_SPEC>> for R

fn from(reader: R<SPI_EXT1_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_EXT1_SPEC>> for R

fn from(reader: R<SPI_EXT1_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_EXT2_SPEC>> for R

fn from(reader: R<SPI_EXT2_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_EXT2_SPEC>> for R

fn from(reader: R<SPI_EXT2_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_EXT3_SPEC>> for R

fn from(reader: R<SPI_EXT3_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_EXT3_SPEC>> for R

fn from(reader: R<SPI_EXT3_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_INTERRUPT_TYPE_SPEC>> for R

fn from(reader: R<SPI_INTERRUPT_TYPE_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_PIN_SPEC>> for R

fn from(reader: R<SPI_PIN_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_PIN_SPEC>> for R

fn from(reader: R<SPI_PIN_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_RD_STATUS_SPEC>> for R

fn from(reader: R<SPI_RD_STATUS_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_RD_STATUS_SPEC>> for R

fn from(reader: R<SPI_RD_STATUS_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_SLAVE1_SPEC>> for R

fn from(reader: R<SPI_SLAVE1_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_SLAVE1_SPEC>> for R

fn from(reader: R<SPI_SLAVE1_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_SLAVE2_SPEC>> for R

fn from(reader: R<SPI_SLAVE2_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_SLAVE2_SPEC>> for R

fn from(reader: R<SPI_SLAVE2_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_SLAVE3_SPEC>> for R

fn from(reader: R<SPI_SLAVE3_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_SLAVE3_SPEC>> for R

fn from(reader: R<SPI_SLAVE3_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_SLAVE_SPEC>> for R

fn from(reader: R<SPI_SLAVE_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_SLAVE_SPEC>> for R

fn from(reader: R<SPI_SLAVE_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_USER1_SPEC>> for R

fn from(reader: R<SPI_USER1_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_USER1_SPEC>> for R

fn from(reader: R<SPI_USER1_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_USER2_SPEC>> for R

fn from(reader: R<SPI_USER2_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_USER2_SPEC>> for R

fn from(reader: R<SPI_USER2_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_USER_SPEC>> for R

fn from(reader: R<SPI_USER_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_USER_SPEC>> for R

fn from(reader: R<SPI_USER_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W0_SPEC>> for R

fn from(reader: R<SPI_W0_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W0_SPEC>> for R

fn from(reader: R<SPI_W0_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W10_SPEC>> for R

fn from(reader: R<SPI_W10_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W10_SPEC>> for R

fn from(reader: R<SPI_W10_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W11_SPEC>> for R

fn from(reader: R<SPI_W11_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W11_SPEC>> for R

fn from(reader: R<SPI_W11_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W12_SPEC>> for R

fn from(reader: R<SPI_W12_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W12_SPEC>> for R

fn from(reader: R<SPI_W12_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W13_SPEC>> for R

fn from(reader: R<SPI_W13_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W13_SPEC>> for R

fn from(reader: R<SPI_W13_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W14_SPEC>> for R

fn from(reader: R<SPI_W14_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W14_SPEC>> for R

fn from(reader: R<SPI_W14_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W15_SPEC>> for R

fn from(reader: R<SPI_W15_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W15_SPEC>> for R

fn from(reader: R<SPI_W15_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W1_SPEC>> for R

fn from(reader: R<SPI_W1_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W1_SPEC>> for R

fn from(reader: R<SPI_W1_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W2_SPEC>> for R

fn from(reader: R<SPI_W2_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W2_SPEC>> for R

fn from(reader: R<SPI_W2_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W3_SPEC>> for R

fn from(reader: R<SPI_W3_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W3_SPEC>> for R

fn from(reader: R<SPI_W3_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W4_SPEC>> for R

fn from(reader: R<SPI_W4_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W4_SPEC>> for R

fn from(reader: R<SPI_W4_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W5_SPEC>> for R

fn from(reader: R<SPI_W5_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W5_SPEC>> for R

fn from(reader: R<SPI_W5_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W6_SPEC>> for R

fn from(reader: R<SPI_W6_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W6_SPEC>> for R

fn from(reader: R<SPI_W6_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W7_SPEC>> for R

fn from(reader: R<SPI_W7_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W7_SPEC>> for R

fn from(reader: R<SPI_W7_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W8_SPEC>> for R

fn from(reader: R<SPI_W8_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W8_SPEC>> for R

fn from(reader: R<SPI_W8_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W9_SPEC>> for R

fn from(reader: R<SPI_W9_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_W9_SPEC>> for R

fn from(reader: R<SPI_W9_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_WR_STATUS_SPEC>> for R

fn from(reader: R<SPI_WR_STATUS_SPEC>) -> Self

Performs the conversion.

impl From<R<SPI_WR_STATUS_SPEC>> for R

fn from(reader: R<SPI_WR_STATUS_SPEC>) -> Self

Performs the conversion.

impl From<R<STAGE_SPEC>> for R

fn from(reader: R<STAGE_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_AUTOBAUD_SPEC>> for R

fn from(reader: R<UART_AUTOBAUD_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_AUTOBAUD_SPEC>> for R

fn from(reader: R<UART_AUTOBAUD_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_CLKDIV_SPEC>> for R

fn from(reader: R<UART_CLKDIV_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_CLKDIV_SPEC>> for R

fn from(reader: R<UART_CLKDIV_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_CONF0_SPEC>> for R

fn from(reader: R<UART_CONF0_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_CONF0_SPEC>> for R

fn from(reader: R<UART_CONF0_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_CONF1_SPEC>> for R

fn from(reader: R<UART_CONF1_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_CONF1_SPEC>> for R

fn from(reader: R<UART_CONF1_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_DATE_SPEC>> for R

fn from(reader: R<UART_DATE_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_DATE_SPEC>> for R

fn from(reader: R<UART_DATE_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_FIFO_SPEC>> for R

fn from(reader: R<UART_FIFO_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_FIFO_SPEC>> for R

fn from(reader: R<UART_FIFO_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_HIGHPULSE_SPEC>> for R

fn from(reader: R<UART_HIGHPULSE_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_HIGHPULSE_SPEC>> for R

fn from(reader: R<UART_HIGHPULSE_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_ID_SPEC>> for R

fn from(reader: R<UART_ID_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_ID_SPEC>> for R

fn from(reader: R<UART_ID_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_INT_ENA_SPEC>> for R

fn from(reader: R<UART_INT_ENA_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_INT_ENA_SPEC>> for R

fn from(reader: R<UART_INT_ENA_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_INT_RAW_SPEC>> for R

fn from(reader: R<UART_INT_RAW_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_INT_RAW_SPEC>> for R

fn from(reader: R<UART_INT_RAW_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_INT_ST_SPEC>> for R

fn from(reader: R<UART_INT_ST_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_INT_ST_SPEC>> for R

fn from(reader: R<UART_INT_ST_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_LOWPULSE_SPEC>> for R

fn from(reader: R<UART_LOWPULSE_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_LOWPULSE_SPEC>> for R

fn from(reader: R<UART_LOWPULSE_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_RXD_CNT_SPEC>> for R

fn from(reader: R<UART_RXD_CNT_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_RXD_CNT_SPEC>> for R

fn from(reader: R<UART_RXD_CNT_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_STATUS_SPEC>> for R

fn from(reader: R<UART_STATUS_SPEC>) -> Self

Performs the conversion.

impl From<R<UART_STATUS_SPEC>> for R

fn from(reader: R<UART_STATUS_SPEC>) -> Self

Performs the conversion.

impl From<R<WDT_CTL_SPEC>> for R

fn from(reader: R<WDT_CTL_SPEC>) -> Self

Performs the conversion.

impl From<R<WDT_OP_ND_SPEC>> for R

fn from(reader: R<WDT_OP_ND_SPEC>) -> Self

Performs the conversion.

impl From<R<WDT_OP_SPEC>> for R

fn from(reader: R<WDT_OP_SPEC>) -> Self

Performs the conversion.

impl From<R<WDT_RST_SPEC>> for R

fn from(reader: R<WDT_RST_SPEC>) -> Self

Performs the conversion.

impl<REG: RegisterSpec, FI> PartialEq<FI> for R<REG> where
    REG::Ux: PartialEq,
    FI: Copy + Into<REG::Ux>, 

fn eq(&self, other: &FI) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.