Module esp32s3::spi1::ctrl

source ·
Expand description

SPI1 control register

Structs§

Type Aliases§

  • D_POL_R
    Field D_POL reader - The bit is used to set MOSI line polarity, 1: high 0, low
  • D_POL_W
    Field D_POL writer - The bit is used to set MOSI line polarity, 1: high 0, low
  • FADDR_OCT_R
    Field FADDR_OCT reader - Set this bit to enable 8-bit-mode(8-bm) in ADDR phase.
  • FADDR_OCT_W
    Field FADDR_OCT writer - Set this bit to enable 8-bit-mode(8-bm) in ADDR phase.
  • FASTRD_MODE_R
    Field FASTRD_MODE reader - This bit should be set when SPI_MEM_FREAD_QIO, SPI_MEM_FREAD_DIO, SPI_MEM_FREAD_QUAD or SPI_MEM_FREAD_DUAL is set.
  • FASTRD_MODE_W
    Field FASTRD_MODE writer - This bit should be set when SPI_MEM_FREAD_QIO, SPI_MEM_FREAD_DIO, SPI_MEM_FREAD_QUAD or SPI_MEM_FREAD_DUAL is set.
  • FCMD_DUAL_R
    Field FCMD_DUAL reader - Set this bit to enable 2-bit-mode(2-bm) in CMD phase.
  • FCMD_DUAL_W
    Field FCMD_DUAL writer - Set this bit to enable 2-bit-mode(2-bm) in CMD phase.
  • FCMD_OCT_R
    Field FCMD_OCT reader - Set this bit to enable 8-bit-mode(8-bm) in CMD phase.
  • FCMD_OCT_W
    Field FCMD_OCT writer - Set this bit to enable 8-bit-mode(8-bm) in CMD phase.
  • FCMD_QUAD_R
    Field FCMD_QUAD reader - Set this bit to enable 4-bit-mode(4-bm) in CMD phase.
  • FCMD_QUAD_W
    Field FCMD_QUAD writer - Set this bit to enable 4-bit-mode(4-bm) in CMD phase.
  • FCS_CRC_EN_R
    Field FCS_CRC_EN reader - For SPI1, initialize crc32 module before writing encrypted data to flash. Active low.
  • FCS_CRC_EN_W
    Field FCS_CRC_EN writer - For SPI1, initialize crc32 module before writing encrypted data to flash. Active low.
  • FDIN_OCT_R
    Field FDIN_OCT reader - Set this bit to enable 8-bit-mode(8-bm) in DIN phase.
  • FDIN_OCT_W
    Field FDIN_OCT writer - Set this bit to enable 8-bit-mode(8-bm) in DIN phase.
  • FDOUT_OCT_R
    Field FDOUT_OCT reader - Set this bit to enable 8-bit-mode(8-bm) in DOUT phase.
  • FDOUT_OCT_W
    Field FDOUT_OCT writer - Set this bit to enable 8-bit-mode(8-bm) in DOUT phase.
  • FDUMMY_OUT_R
    Field FDUMMY_OUT reader - In the DUMMY phase the signal level of SPI bus is output by the SPI0 controller.
  • FDUMMY_OUT_W
    Field FDUMMY_OUT writer - In the DUMMY phase the signal level of SPI bus is output by the SPI0 controller.
  • FREAD_DIO_R
    Field FREAD_DIO reader - In hardware 0xBB read operation, ADDR phase and DIN phase apply 2 signals(2-bit-mode). 1: enable 0: disable.
  • FREAD_DIO_W
    Field FREAD_DIO writer - In hardware 0xBB read operation, ADDR phase and DIN phase apply 2 signals(2-bit-mode). 1: enable 0: disable.
  • FREAD_DUAL_R
    Field FREAD_DUAL reader - In hardware 0x3B read operation, DIN phase apply 2 signals. 1: enable 0: disable.
  • FREAD_DUAL_W
    Field FREAD_DUAL writer - In hardware 0x3B read operation, DIN phase apply 2 signals. 1: enable 0: disable.
  • FREAD_QIO_R
    Field FREAD_QIO reader - In hardware 0xEB read operation, ADDR phase and DIN phase apply 4 signals(4-bit-mode). 1: enable 0: disable.
  • FREAD_QIO_W
    Field FREAD_QIO writer - In hardware 0xEB read operation, ADDR phase and DIN phase apply 4 signals(4-bit-mode). 1: enable 0: disable.
  • FREAD_QUAD_R
    Field FREAD_QUAD reader - In hardware 0x6B read operation, DIN phase apply 4 signals(4-bit-mode). 1: enable 0: disable.
  • FREAD_QUAD_W
    Field FREAD_QUAD writer - In hardware 0x6B read operation, DIN phase apply 4 signals(4-bit-mode). 1: enable 0: disable.
  • Q_POL_R
    Field Q_POL reader - The bit is used to set MISO line polarity, 1: high 0, low
  • Q_POL_W
    Field Q_POL writer - The bit is used to set MISO line polarity, 1: high 0, low
  • R
    Register CTRL reader
  • RESANDRES_R
    Field RESANDRES reader - The Device ID is read out to SPI_MEM_RD_STATUS register, this bit combine with spi_mem_flash_res bit. 1: enable 0: disable.
  • RESANDRES_W
    Field RESANDRES writer - The Device ID is read out to SPI_MEM_RD_STATUS register, this bit combine with spi_mem_flash_res bit. 1: enable 0: disable.
  • TX_CRC_EN_R
    Field TX_CRC_EN reader - For SPI1, enable crc32 when writing encrypted data to flash. 1: enable 0:disable
  • TX_CRC_EN_W
    Field TX_CRC_EN writer - For SPI1, enable crc32 when writing encrypted data to flash. 1: enable 0:disable
  • W
    Register CTRL writer
  • WP_R
    Field WP reader - Write protect signal output when SPI is idle. 1: output high, 0: output low.
  • WP_W
    Field WP writer - Write protect signal output when SPI is idle. 1: output high, 0: output low.
  • WRSR_2B_R
    Field WRSR_2B reader - Two bytes data will be written to status register when it is set. 1: enable 0: disable.
  • WRSR_2B_W
    Field WRSR_2B writer - Two bytes data will be written to status register when it is set. 1: enable 0: disable.