Module esp32s3::spi1::misc

SPI1 misc register.

Structs

• MISC_SPEC
  SPI1 misc register.

Type Aliases

• AUTO_PER_R
  Field AUTO_PER reader - Set this bit to enable auto PER function. Hardware will sent out PER command if PES command is sent.
• AUTO_PER_W
  Field AUTO_PER writer - Set this bit to enable auto PER function. Hardware will sent out PER command if PES command is sent.
• CK_IDLE_EDGE_R
  Field CK_IDLE_EDGE reader - 1: SPI_CLK line is high when MSPI is idle. 0: SPI_CLK line is low when MSPI is idle.
• CK_IDLE_EDGE_W
  Field CK_IDLE_EDGE writer - 1: SPI_CLK line is high when MSPI is idle. 0: SPI_CLK line is low when MSPI is idle.
• CS0_DIS_R
  Field CS0_DIS reader - Set this bit to raise high SPI_CS pin, which means that the SPI device(flash) connected to SPI_CS is in low level when SPI1 transfer starts.
• CS0_DIS_W
  Field CS0_DIS writer - Set this bit to raise high SPI_CS pin, which means that the SPI device(flash) connected to SPI_CS is in low level when SPI1 transfer starts.
• CS1_DIS_R
  Field CS1_DIS reader - Set this bit to raise high SPI_CS1 pin, which means that the SPI device(Ext_RAM) connected to SPI_CS1 is in low level when SPI1 transfer starts.
• CS1_DIS_W
  Field CS1_DIS writer - Set this bit to raise high SPI_CS1 pin, which means that the SPI device(Ext_RAM) connected to SPI_CS1 is in low level when SPI1 transfer starts.
• CS_KEEP_ACTIVE_R
  Field CS_KEEP_ACTIVE reader - SPI_CS line keep low when the bit is set.
• CS_KEEP_ACTIVE_W
  Field CS_KEEP_ACTIVE writer - SPI_CS line keep low when the bit is set.
• R
  Register MISC reader
• W
  Register MISC writer