Module esp32s3::efuse::rd_rs_err0

Programming error record register 0 of BLOCK1-10.

Structs

• R
  Register RD_RS_ERR0 reader
• RD_RS_ERR0_SPEC
  Programming error record register 0 of BLOCK1-10.

Type Definitions

• KEY0_ERR_NUM_R
  Field KEY0_ERR_NUM reader - The value of this signal means the number of error bytes.
• KEY0_FAIL_R
  Field KEY0_FAIL reader - 0: Means no failure and that the data of key0 is reliable 1: Means that programming key0 failed and the number of error bytes is over 6.
• KEY1_ERR_NUM_R
  Field KEY1_ERR_NUM reader - The value of this signal means the number of error bytes.
• KEY1_FAIL_R
  Field KEY1_FAIL reader - 0: Means no failure and that the data of key1 is reliable 1: Means that programming key1 failed and the number of error bytes is over 6.
• KEY2_ERR_NUM_R
  Field KEY2_ERR_NUM reader - The value of this signal means the number of error bytes.
• KEY2_FAIL_R
  Field KEY2_FAIL reader - 0: Means no failure and that the data of key2 is reliable 1: Means that programming key2 failed and the number of error bytes is over 6.
• KEY3_ERR_NUM_R
  Field KEY3_ERR_NUM reader - The value of this signal means the number of error bytes.
• KEY3_FAIL_R
  Field KEY3_FAIL reader - 0: Means no failure and that the data of key3 is reliable 1: Means that programming key3 failed and the number of error bytes is over 6.
• KEY4_ERR_NUM_R
  Field KEY4_ERR_NUM reader - The value of this signal means the number of error bytes.
• KEY4_FAIL_R
  Field KEY4_FAIL reader - 0: Means no failure and that the data of key4 is reliable 1: Means that programming key4 failed and the number of error bytes is over 6.
• MAC_SPI_8M_ERR_NUM_R
  Field MAC_SPI_8M_ERR_NUM reader - The value of this signal means the number of error bytes.
• MAC_SPI_8M_FAIL_R
  Field MAC_SPI_8M_FAIL reader - 0: Means no failure and that the data of MAC_SPI_8M is reliable 1: Means that programming user data failed and the number of error bytes is over 6.
• SYS_PART1_FAIL_R
  Field SYS_PART1_FAIL reader - 0: Means no failure and that the data of system part1 is reliable 1: Means that programming user data failed and the number of error bytes is over 6.
• SYS_PART1_NUM_R
  Field SYS_PART1_NUM reader - The value of this signal means the number of error bytes.
• USR_DATA_ERR_NUM_R
  Field USR_DATA_ERR_NUM reader - The value of this signal means the number of error bytes.
• USR_DATA_FAIL_R
  Field USR_DATA_FAIL reader - 0: Means no failure and that the user data is reliable 1: Means that programming user data failed and the number of error bytes is over 6.