Struct esp32s3::system::perip_rst_en0::W

pub struct W(_);

Register PERIP_RST_EN0 writer

Implementations

impl W

pub fn timers_rst(&mut self) -> TIMERS_RST_W<'_, 0>

Bit 0 - Set 1 to let TIMERS reset

pub fn spi01_rst(&mut self) -> SPI01_RST_W<'_, 1>

Bit 1 - Set 1 to let SPI01 reset

pub fn uart_rst(&mut self) -> UART_RST_W<'_, 2>

Bit 2 - Set 1 to let UART reset

pub fn wdg_rst(&mut self) -> WDG_RST_W<'_, 3>

Bit 3 - Set 1 to let WDG reset

pub fn i2s0_rst(&mut self) -> I2S0_RST_W<'_, 4>

Bit 4 - Set 1 to let I2S0 reset

pub fn uart1_rst(&mut self) -> UART1_RST_W<'_, 5>

Bit 5 - Set 1 to let UART1 reset

pub fn spi2_rst(&mut self) -> SPI2_RST_W<'_, 6>

Bit 6 - Set 1 to let SPI2 reset

pub fn i2c_ext0_rst(&mut self) -> I2C_EXT0_RST_W<'_, 7>

Bit 7 - Set 1 to let I2C_EXT0 reset

pub fn uhci0_rst(&mut self) -> UHCI0_RST_W<'_, 8>

Bit 8 - Set 1 to let UHCI0 reset

pub fn rmt_rst(&mut self) -> RMT_RST_W<'_, 9>

Bit 9 - Set 1 to let RMT reset

pub fn pcnt_rst(&mut self) -> PCNT_RST_W<'_, 10>

Bit 10 - Set 1 to let PCNT reset

pub fn ledc_rst(&mut self) -> LEDC_RST_W<'_, 11>

Bit 11 - Set 1 to let LEDC reset

pub fn uhci1_rst(&mut self) -> UHCI1_RST_W<'_, 12>

Bit 12 - Set 1 to let UHCI1 reset

pub fn timergroup_rst(&mut self) -> TIMERGROUP_RST_W<'_, 13>

Bit 13 - Set 1 to let TIMERGROUP reset

pub fn efuse_rst(&mut self) -> EFUSE_RST_W<'_, 14>

Bit 14 - Set 1 to let EFUSE reset

pub fn timergroup1_rst(&mut self) -> TIMERGROUP1_RST_W<'_, 15>

Bit 15 - Set 1 to let TIMERGROUP1 reset

pub fn spi3_rst(&mut self) -> SPI3_RST_W<'_, 16>

Bit 16 - Set 1 to let SPI3 reset

pub fn pwm0_rst(&mut self) -> PWM0_RST_W<'_, 17>

Bit 17 - Set 1 to let PWM0 reset

pub fn i2c_ext1_rst(&mut self) -> I2C_EXT1_RST_W<'_, 18>

Bit 18 - Set 1 to let I2C_EXT1 reset

pub fn can_rst(&mut self) -> CAN_RST_W<'_, 19>

Bit 19 - Set 1 to let CAN reset

pub fn pwm1_rst(&mut self) -> PWM1_RST_W<'_, 20>

Bit 20 - Set 1 to let PWM1 reset

pub fn i2s1_rst(&mut self) -> I2S1_RST_W<'_, 21>

Bit 21 - Set 1 to let I2S1 reset

pub fn spi2_dma_rst(&mut self) -> SPI2_DMA_RST_W<'_, 22>

Bit 22 - Set 1 to let SPI2 reset

pub fn usb_rst(&mut self) -> USB_RST_W<'_, 23>

Bit 23 - Set 1 to let USB reset

pub fn uart_mem_rst(&mut self) -> UART_MEM_RST_W<'_, 24>

Bit 24 - Set 1 to let UART_MEM reset

pub fn pwm2_rst(&mut self) -> PWM2_RST_W<'_, 25>

Bit 25 - Set 1 to let PWM2 reset

pub fn pwm3_rst(&mut self) -> PWM3_RST_W<'_, 26>

Bit 26 - Set 1 to let PWM3 reset

pub fn spi3_dma_rst(&mut self) -> SPI3_DMA_RST_W<'_, 27>

Bit 27 - Set 1 to let SPI3 reset

pub fn apb_saradc_rst(&mut self) -> APB_SARADC_RST_W<'_, 28>

Bit 28 - Set 1 to let APB_SARADC reset

pub fn systimer_rst(&mut self) -> SYSTIMER_RST_W<'_, 29>

Bit 29 - Set 1 to let SYSTIMER reset

pub fn adc2_arb_rst(&mut self) -> ADC2_ARB_RST_W<'_, 30>

Bit 30 - Set 1 to let ADC2_ARB reset

pub fn spi4_rst(&mut self) -> SPI4_RST_W<'_, 31>

Bit 31 - Set 1 to let SPI4 reset

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<PERIP_RST_EN0_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<PERIP_RST_EN0_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<PERIP_RST_EN0_SPEC>> for W

fn from(writer: W<PERIP_RST_EN0_SPEC>) -> Self

Converts to this type from the input type.