Struct esp32s3::rtc_cntl::clk_conf::W

pub struct W(_);

Register CLK_CONF writer

Implementations

impl W

pub fn efuse_clk_force_gating(&mut self) -> EFUSE_CLK_FORCE_GATING_W<'_, 1>

Bit 1 - force efuse clk gating

pub fn efuse_clk_force_nogating(&mut self) -> EFUSE_CLK_FORCE_NOGATING_W<'_, 2>

Bit 2 - force efuse clk nogating

pub fn ck8m_div_sel_vld(&mut self) -> CK8M_DIV_SEL_VLD_W<'_, 3>

Bit 3 - used to sync reg_ck8m_div_sel bus. Clear vld before set reg_ck8m_div_sel, then set vld to actually switch the clk

pub fn ck8m_div(&mut self) -> CK8M_DIV_W<'_, 4>

Bits 4:5 - CK8M_D256_OUT divider. 00: div128, 01: div256, 10: div512, 11: div1024.

pub fn enb_ck8m(&mut self) -> ENB_CK8M_W<'_, 6>

Bit 6 - disable CK8M and CK8M_D256_OUT

pub fn enb_ck8m_div(&mut self) -> ENB_CK8M_DIV_W<'_, 7>

Bit 7 - 1: CK8M_D256_OUT is actually CK8M, 0: CK8M_D256_OUT is CK8M divided by 256

pub fn dig_xtal32k_en(&mut self) -> DIG_XTAL32K_EN_W<'_, 8>

Bit 8 - enable CK_XTAL_32K for digital core (no relationship with RTC core)

pub fn dig_clk8m_d256_en(&mut self) -> DIG_CLK8M_D256_EN_W<'_, 9>

Bit 9 - enable CK8M_D256_OUT for digital core (no relationship with RTC core)

pub fn dig_clk8m_en(&mut self) -> DIG_CLK8M_EN_W<'_, 10>

Bit 10 - enable CK8M for digital core (no relationship with RTC core)

pub fn ck8m_div_sel(&mut self) -> CK8M_DIV_SEL_W<'_, 12>

Bits 12:14 - divider = reg_ck8m_div_sel + 1

pub fn xtal_force_nogating(&mut self) -> XTAL_FORCE_NOGATING_W<'_, 15>

Bit 15 - XTAL force no gating during sleep

pub fn ck8m_force_nogating(&mut self) -> CK8M_FORCE_NOGATING_W<'_, 16>

Bit 16 - CK8M force no gating during sleep

pub fn ck8m_dfreq(&mut self) -> CK8M_DFREQ_W<'_, 17>

Bits 17:24 - CK8M_DFREQ

pub fn ck8m_force_pd(&mut self) -> CK8M_FORCE_PD_W<'_, 25>

Bit 25 - CK8M force power down

pub fn ck8m_force_pu(&mut self) -> CK8M_FORCE_PU_W<'_, 26>

Bit 26 - CK8M force power up

pub fn xtal_global_force_gating(&mut self) -> XTAL_GLOBAL_FORCE_GATING_W<'_, 27>

Bit 27 - force global xtal gating

pub fn xtal_global_force_nogating(
    &mut self
) -> XTAL_GLOBAL_FORCE_NOGATING_W<'_, 28>

Bit 28 - force global xtal no gating

pub fn fast_clk_rtc_sel(&mut self) -> FAST_CLK_RTC_SEL_W<'_, 29>

Bit 29 - fast_clk_rtc sel. 0: XTAL div 4, 1: CK8M

pub fn ana_clk_rtc_sel(&mut self) -> ANA_CLK_RTC_SEL_W<'_, 30>

Bits 30:31 - select slow clock

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<CLK_CONF_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<CLK_CONF_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<CLK_CONF_SPEC>> for W

fn from(writer: W<CLK_CONF_SPEC>) -> Self

Converts to this type from the input type.