Struct esp32s3_hal::pac::usb_device::int_clr::W

pub struct W(_);

Register INT_CLR writer

Implementations

impl W

pub fn jtag_in_flush_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 0>

Bit 0 - Set this bit to clear the USB_DEVICE_JTAG_IN_FLUSH_INT interrupt.

pub fn sof_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 1>

Bit 1 - Set this bit to clear the USB_DEVICE_JTAG_SOF_INT interrupt.

pub fn serial_out_recv_pkt_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 2>

Bit 2 - Set this bit to clear the USB_DEVICE_SERIAL_OUT_RECV_PKT_INT interrupt.

pub fn serial_in_empty_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 3>

Bit 3 - Set this bit to clear the USB_DEVICE_SERIAL_IN_EMPTY_INT interrupt.

pub fn pid_err_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 4>

Bit 4 - Set this bit to clear the USB_DEVICE_PID_ERR_INT interrupt.

pub fn crc5_err_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 5>

Bit 5 - Set this bit to clear the USB_DEVICE_CRC5_ERR_INT interrupt.

pub fn crc16_err_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 6>

Bit 6 - Set this bit to clear the USB_DEVICE_CRC16_ERR_INT interrupt.

pub fn stuff_err_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 7>

Bit 7 - Set this bit to clear the USB_DEVICE_STUFF_ERR_INT interrupt.

pub fn in_token_rec_in_ep1_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 8>

Bit 8 - Set this bit to clear the USB_DEVICE_IN_TOKEN_IN_EP1_INT interrupt.

pub fn usb_bus_reset_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 9>

Bit 9 - Set this bit to clear the USB_DEVICE_USB_BUS_RESET_INT interrupt.

pub fn out_ep1_zero_payload_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 10>

Bit 10 - Set this bit to clear the USB_DEVICE_OUT_EP1_ZERO_PAYLOAD_INT interrupt.

pub fn out_ep2_zero_payload_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_SPEC, bool, BitM, 11>

Bit 11 - Set this bit to clear the USB_DEVICE_OUT_EP2_ZERO_PAYLOAD_INT interrupt.

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<INT_CLR_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<INT_CLR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

impl From<W<INT_CLR_SPEC>> for W

fn from(writer: W<INT_CLR_SPEC>) -> W

Converts to this type from the input type.