Struct esp32s3_hal::pac::rtc_cntl::int_clr_rtc::W

pub struct W(_);

Register INT_CLR_RTC writer

Implementations

impl W

pub fn slp_wakeup_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 0>

Bit 0 - Clear sleep wakeup interrupt state

pub fn slp_reject_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 1>

Bit 1 - Clear sleep reject interrupt state

pub fn sdio_idle_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 2>

Bit 2 - Clear SDIO idle interrupt state

pub fn wdt_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 3>

Bit 3 - Clear RTC WDT interrupt state

pub fn touch_scan_done_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 4>

Bit 4 - clear touch scan done interrupt raw

pub fn ulp_cp_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 5>

Bit 5 - Clear ULP-coprocessor interrupt state

pub fn touch_done_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 6>

Bit 6 - Clear touch done interrupt state

pub fn touch_active_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 7>

Bit 7 - Clear touch active interrupt state

pub fn touch_inactive_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 8>

Bit 8 - Clear touch inactive interrupt state

pub fn brown_out_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 9>

Bit 9 - Clear brown out interrupt state

pub fn main_timer_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 10>

Bit 10 - Clear RTC main timer interrupt state

pub fn saradc1_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 11>

Bit 11 - Clear saradc1 interrupt state

pub fn tsens_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 12>

Bit 12 - Clear tsens interrupt state

pub fn cocpu_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 13>

Bit 13 - Clear riscV cocpu interrupt state

pub fn saradc2_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 14>

Bit 14 - Clear saradc2 interrupt state

pub fn swd_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 15>

Bit 15 - Clear super watch dog interrupt state

pub fn xtal32k_dead_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 16>

Bit 16 - Clear RTC WDT interrupt state

pub fn cocpu_trap_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 17>

Bit 17 - Clear cocpu trap interrupt state

pub fn touch_timeout_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 18>

Bit 18 - Clear touch timeout interrupt state

pub fn glitch_det_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 19>

Bit 19 - Clear glitch det interrupt state

pub fn touch_approach_loop_done_int_clr(
    &mut self
) -> BitWriterRaw<'_, u32, INT_CLR_RTC_SPEC, bool, BitM, 20>

Bit 20 - cleartouch approach mode loop interrupt state

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<INT_CLR_RTC_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<INT_CLR_RTC_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

impl From<W<INT_CLR_RTC_SPEC>> for W

fn from(writer: W<INT_CLR_RTC_SPEC>) -> W

Converts to this type from the input type.