Struct esp32s3_hal::pac::pwm0::int_ena::R

pub struct R(_);

Register INT_ENA reader

Implementations

impl R

pub fn timer0_stop_int_ena(&self) -> BitReaderRaw<bool>

Bit 0 - The enable bit for the interrupt triggered when the timer 0 stops.

pub fn timer1_stop_int_ena(&self) -> BitReaderRaw<bool>

Bit 1 - The enable bit for the interrupt triggered when the timer 1 stops.

pub fn timer2_stop_int_ena(&self) -> BitReaderRaw<bool>

Bit 2 - The enable bit for the interrupt triggered when the timer 2 stops.

pub fn timer0_tez_int_ena(&self) -> BitReaderRaw<bool>

Bit 3 - The enable bit for the interrupt triggered by a PWM timer 0 TEZ event.

pub fn timer1_tez_int_ena(&self) -> BitReaderRaw<bool>

Bit 4 - The enable bit for the interrupt triggered by a PWM timer 1 TEZ event.

pub fn timer2_tez_int_ena(&self) -> BitReaderRaw<bool>

Bit 5 - The enable bit for the interrupt triggered by a PWM timer 2 TEZ event.

pub fn timer0_tep_int_ena(&self) -> BitReaderRaw<bool>

Bit 6 - The enable bit for the interrupt triggered by a PWM timer 0 TEP event.

pub fn timer1_tep_int_ena(&self) -> BitReaderRaw<bool>

Bit 7 - The enable bit for the interrupt triggered by a PWM timer 1 TEP event.

pub fn timer2_tep_int_ena(&self) -> BitReaderRaw<bool>

Bit 8 - The enable bit for the interrupt triggered by a PWM timer 2 TEP event.

pub fn fault0_int_ena(&self) -> BitReaderRaw<bool>

Bit 9 - The enable bit for the interrupt triggered when event_f0 starts.

pub fn fault1_int_ena(&self) -> BitReaderRaw<bool>

Bit 10 - The enable bit for the interrupt triggered when event_f1 starts.

pub fn fault2_int_ena(&self) -> BitReaderRaw<bool>

Bit 11 - The enable bit for the interrupt triggered when event_f2 starts.

pub fn fault0_clr_int_ena(&self) -> BitReaderRaw<bool>

Bit 12 - The enable bit for the interrupt triggered when event_f0 ends.

pub fn fault1_clr_int_ena(&self) -> BitReaderRaw<bool>

Bit 13 - The enable bit for the interrupt triggered when event_f1 ends.

pub fn fault2_clr_int_ena(&self) -> BitReaderRaw<bool>

Bit 14 - The enable bit for the interrupt triggered when event_f2 ends.

pub fn cmpr0_tea_int_ena(&self) -> BitReaderRaw<bool>

Bit 15 - The enable bit for the interrupt triggered by a PWM operator 0 TEA event

pub fn cmpr1_tea_int_ena(&self) -> BitReaderRaw<bool>

Bit 16 - The enable bit for the interrupt triggered by a PWM operator 1 TEA event

pub fn cmpr2_tea_int_ena(&self) -> BitReaderRaw<bool>

Bit 17 - The enable bit for the interrupt triggered by a PWM operator 2 TEA event

pub fn cmpr0_teb_int_ena(&self) -> BitReaderRaw<bool>

Bit 18 - The enable bit for the interrupt triggered by a PWM operator 0 TEB event

pub fn cmpr1_teb_int_ena(&self) -> BitReaderRaw<bool>

Bit 19 - The enable bit for the interrupt triggered by a PWM operator 1 TEB event

pub fn cmpr2_teb_int_ena(&self) -> BitReaderRaw<bool>

Bit 20 - The enable bit for the interrupt triggered by a PWM operator 2 TEB event

pub fn tz0_cbc_int_ena(&self) -> BitReaderRaw<bool>

Bit 21 - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM0.

pub fn tz1_cbc_int_ena(&self) -> BitReaderRaw<bool>

Bit 22 - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM1.

pub fn tz2_cbc_int_ena(&self) -> BitReaderRaw<bool>

Bit 23 - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM2.

pub fn tz0_ost_int_ena(&self) -> BitReaderRaw<bool>

Bit 24 - The enable bit for the interrupt triggered by a one-shot mode action on PWM0.

pub fn tz1_ost_int_ena(&self) -> BitReaderRaw<bool>

Bit 25 - The enable bit for the interrupt triggered by a one-shot mode action on PWM1.

pub fn tz2_ost_int_ena(&self) -> BitReaderRaw<bool>

Bit 26 - The enable bit for the interrupt triggered by a one-shot mode action on PWM2.

pub fn cap0_int_ena(&self) -> BitReaderRaw<bool>

Bit 27 - The enable bit for the interrupt triggered by capture on channel 0.

pub fn cap1_int_ena(&self) -> BitReaderRaw<bool>

Bit 28 - The enable bit for the interrupt triggered by capture on channel 1.

pub fn cap2_int_ena(&self) -> BitReaderRaw<bool>

Bit 29 - The enable bit for the interrupt triggered by capture on channel 2.

Methods from Deref<Target = R<INT_ENA_SPEC>>

pub fn bits(&self) -> <REG as RegisterSpec>::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<INT_ENA_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<R as Deref>::Target

Dereferences the value.

impl From<R<INT_ENA_SPEC>> for R

fn from(reader: R<INT_ENA_SPEC>) -> R

Converts to this type from the input type.