Struct esp32s3_hal::gpio::GpioPin

pub struct GpioPin<MODE, const GPIONUM: u8> { /* private fields */ }

Implementations

impl<MODE, const GPIONUM: u8> GpioPin<MODE, GPIONUM>where GpioPin<MODE, GPIONUM>: GpioProperties,

pub fn into_floating_input(self) -> GpioPin<Input<Floating>, GPIONUM>

pub fn into_pull_up_input(self) -> GpioPin<Input<PullUp>, GPIONUM>

pub fn into_pull_down_input(self) -> GpioPin<Input<PullDown>, GPIONUM>

impl<MODE, const GPIONUM: u8> GpioPin<MODE, GPIONUM>where GpioPin<MODE, GPIONUM>: GpioProperties, <GpioPin<MODE, GPIONUM> as GpioProperties>::PinType: IsOutputPin,

pub fn into_push_pull_output(self) -> GpioPin<Output<PushPull>, GPIONUM>

pub fn into_open_drain_output(self) -> GpioPin<Output<OpenDrain>, GPIONUM>

pub fn into_alternate_1(self) -> GpioPin<Alternate<AF1>, GPIONUM>

pub fn into_alternate_2(self) -> GpioPin<Alternate<AF2>, GPIONUM>

impl<MODE, const GPIONUM: u8> GpioPin<MODE, GPIONUM>where GpioPin<MODE, GPIONUM>: GpioProperties, <GpioPin<MODE, GPIONUM> as GpioProperties>::PinType: IsAnalogPin,

pub fn into_analog(self) -> GpioPin<Analog, GPIONUM>

impl<MODE> GpioPin<MODE, 0>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 1>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 2>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 3>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 4>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 5>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 6>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 7>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 8>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 9>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 10>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 11>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 12>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 13>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 14>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 15>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 16>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 17>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 18>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 19>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 20>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 21>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 26>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 27>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 28>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 29>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 30>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 31>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 32>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 33>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 34>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 35>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 36>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 37>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 38>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 39>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 40>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 41>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 42>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 43>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 44>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 45>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 46>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 47>

pub fn degrade(self) -> AnyPin<MODE>

impl<MODE> GpioPin<MODE, 48>

pub fn degrade(self) -> AnyPin<MODE>

Trait Implementations

impl Channel<ADC1> for GpioPin<Analog, 1>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC1> for GpioPin<Analog, 10>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC1> for GpioPin<Analog, 2>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC1> for GpioPin<Analog, 3>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC1> for GpioPin<Analog, 4>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC1> for GpioPin<Analog, 5>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC1> for GpioPin<Analog, 6>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC1> for GpioPin<Analog, 7>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC1> for GpioPin<Analog, 8>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC1> for GpioPin<Analog, 9>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC2> for GpioPin<Analog, 11>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC2> for GpioPin<Analog, 12>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC2> for GpioPin<Analog, 13>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC2> for GpioPin<Analog, 14>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC2> for GpioPin<Analog, 15>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC2> for GpioPin<Analog, 16>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC2> for GpioPin<Analog, 17>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC2> for GpioPin<Analog, 18>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC2> for GpioPin<Analog, 19>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl Channel<ADC2> for GpioPin<Analog, 20>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl<MODE> From<GpioPin<MODE, 0>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 0>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 1>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 1>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 10>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 10>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 11>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 11>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 12>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 12>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 13>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 13>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 14>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 14>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 15>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 15>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 16>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 16>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 17>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 17>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 18>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 18>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 19>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 19>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 2>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 2>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 20>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 20>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 21>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 21>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 26>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 26>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 27>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 27>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 28>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 28>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 29>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 29>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 3>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 3>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 30>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 30>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 31>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 31>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 32>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 32>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 33>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 33>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 34>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 34>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 35>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 35>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 36>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 36>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 37>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 37>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 38>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 38>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 39>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 39>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 4>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 4>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 40>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 40>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 41>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 41>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 42>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 42>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 43>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 43>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 44>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 44>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 45>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 45>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 46>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 46>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 47>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 47>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 48>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 48>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 5>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 5>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 6>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 6>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 7>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 7>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 8>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 8>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<MODE> From<GpioPin<MODE, 9>> for AnyPin<MODE>

fn from(value: GpioPin<MODE, 9>) -> AnyPin<MODE>

Converts to this type from the input type.

impl<const GPIONUM: u8> From<GpioPin<Unknown, GPIONUM>> for GpioPin<Input<Floating>, GPIONUM>where GpioPin<Input<Floating>, GPIONUM>: GpioProperties, <GpioPin<Input<Floating>, GPIONUM> as GpioProperties>::PinType: IsOutputPin, GpioPin<Unknown, GPIONUM>: GpioProperties,

fn from(pin: GpioPin<Unknown, GPIONUM>) -> GpioPin<Input<Floating>, GPIONUM>

Converts to this type from the input type.

impl<const GPIONUM: u8> From<GpioPin<Unknown, GPIONUM>> for GpioPin<Input<PullDown>, GPIONUM>where GpioPin<Input<PullDown>, GPIONUM>: GpioProperties, <GpioPin<Input<PullDown>, GPIONUM> as GpioProperties>::PinType: IsInputPin, GpioPin<Unknown, GPIONUM>: GpioProperties,

fn from(pin: GpioPin<Unknown, GPIONUM>) -> GpioPin<Input<PullDown>, GPIONUM>

Converts to this type from the input type.

impl<const GPIONUM: u8> From<GpioPin<Unknown, GPIONUM>> for GpioPin<Input<PullUp>, GPIONUM>where GpioPin<Input<PullUp>, GPIONUM>: GpioProperties, <GpioPin<Input<PullUp>, GPIONUM> as GpioProperties>::PinType: IsOutputPin, GpioPin<Unknown, GPIONUM>: GpioProperties,

fn from(pin: GpioPin<Unknown, GPIONUM>) -> GpioPin<Input<PullUp>, GPIONUM>

Converts to this type from the input type.

impl<const GPIONUM: u8> From<GpioPin<Unknown, GPIONUM>> for GpioPin<Output<OpenDrain>, GPIONUM>where GpioPin<Output<OpenDrain>, GPIONUM>: GpioProperties, <GpioPin<Output<OpenDrain>, GPIONUM> as GpioProperties>::PinType: IsOutputPin, GpioPin<Unknown, GPIONUM>: GpioProperties, <GpioPin<Unknown, GPIONUM> as GpioProperties>::PinType: IsOutputPin,

fn from(pin: GpioPin<Unknown, GPIONUM>) -> GpioPin<Output<OpenDrain>, GPIONUM>

Converts to this type from the input type.

impl<const GPIONUM: u8> From<GpioPin<Unknown, GPIONUM>> for GpioPin<Output<PushPull>, GPIONUM>where GpioPin<Output<PushPull>, GPIONUM>: GpioProperties, <GpioPin<Output<PushPull>, GPIONUM> as GpioProperties>::PinType: IsOutputPin, GpioPin<Unknown, GPIONUM>: GpioProperties, <GpioPin<Unknown, GPIONUM> as GpioProperties>::PinType: IsOutputPin,

fn from(pin: GpioPin<Unknown, GPIONUM>) -> GpioPin<Output<PushPull>, GPIONUM>

Converts to this type from the input type.

impl<MODE> GpioProperties for GpioPin<MODE, 0>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio0Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 1>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio1Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 10>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio10Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 11>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio11Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 12>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio12Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 13>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio13Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 14>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio14Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 15>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio15Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 16>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio16Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 17>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio17Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 18>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio18Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 19>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio19Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 2>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio2Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 20>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio20Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 21>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio21Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 26>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio26Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 27>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio27Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 28>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio28Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 29>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio29Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 3>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio3Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 30>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio30Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 31>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio31Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 32>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio32Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 33>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio33Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 34>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio34Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 35>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio35Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 36>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio36Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 37>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio37Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 38>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio38Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 39>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio39Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 4>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio4Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 40>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio40Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 41>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio41Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 42>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio42Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 43>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio43Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 44>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio44Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 45>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio45Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 46>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio46Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 47>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio47Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 48>

type Bank = Bank1GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank1

type Signals = Gpio48Signals

type PinType = InputOutputPinType

impl<MODE> GpioProperties for GpioPin<MODE, 5>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio5Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 6>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio6Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 7>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio7Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 8>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio8Signals

type PinType = InputOutputAnalogPinType

impl<MODE> GpioProperties for GpioPin<MODE, 9>

type Bank = Bank0GpioRegisterAccess

type InterruptStatus = InterruptStatusRegisterAccessBank0

type Signals = Gpio9Signals

type PinType = InputOutputAnalogPinType

impl<MODE, const GPIONUM: u8> InputPin for GpioPin<Input<MODE>, GPIONUM>where GpioPin<Input<MODE>, GPIONUM>: GpioProperties,

type Error = Infallible

Error type

fn is_high( &self ) -> Result<bool, <GpioPin<Input<MODE>, GPIONUM> as InputPin>::Error>

Is the input pin high?

fn is_low( &self ) -> Result<bool, <GpioPin<Input<MODE>, GPIONUM> as InputPin>::Error>

Is the input pin low?

impl<MODE, const GPIONUM: u8> InputPin for GpioPin<MODE, GPIONUM>where GpioPin<MODE, GPIONUM>: GpioProperties,

fn set_to_input(&mut self) -> &mut GpioPin<MODE, GPIONUM>

fn enable_input(&mut self, on: bool) -> &mut GpioPin<MODE, GPIONUM>

fn enable_input_in_sleep_mode( &mut self, on: bool ) -> &mut GpioPin<MODE, GPIONUM>

fn is_input_high(&self) -> bool

fn connect_input_to_peripheral_with_options( &mut self, signal: InputSignal, invert: bool, force_via_gpio_mux: bool ) -> &mut GpioPin<MODE, GPIONUM>

fn disconnect_input_from_peripheral( &mut self, signal: InputSignal ) -> &mut GpioPin<MODE, GPIONUM>

Remove a connected signal from this input pin.

fn connect_input_to_peripheral(&mut self, signal: InputSignal) -> &mut Self

impl<const GPIONUM: u8> InputPin for GpioPin<Output<OpenDrain>, GPIONUM>where GpioPin<Output<OpenDrain>, GPIONUM>: GpioProperties,

type Error = Infallible

Error type

fn is_high( &self ) -> Result<bool, <GpioPin<Output<OpenDrain>, GPIONUM> as InputPin>::Error>

Is the input pin high?

fn is_low( &self ) -> Result<bool, <GpioPin<Output<OpenDrain>, GPIONUM> as InputPin>::Error>

Is the input pin low?

impl<MODE, const GPIONUM: u8> OutputPin for GpioPin<MODE, GPIONUM>where GpioPin<MODE, GPIONUM>: GpioProperties, <GpioPin<MODE, GPIONUM> as GpioProperties>::PinType: IsOutputPin,

fn set_to_open_drain_output(&mut self) -> &mut GpioPin<MODE, GPIONUM>

fn set_to_push_pull_output(&mut self) -> &mut GpioPin<MODE, GPIONUM>

fn enable_output(&mut self, on: bool) -> &mut GpioPin<MODE, GPIONUM>

fn set_output_high(&mut self, high: bool) -> &mut GpioPin<MODE, GPIONUM>

fn set_drive_strength( &mut self, strength: DriveStrength ) -> &mut GpioPin<MODE, GPIONUM>

fn enable_open_drain(&mut self, on: bool) -> &mut GpioPin<MODE, GPIONUM>

fn internal_pull_up_in_sleep_mode( &mut self, on: bool ) -> &mut GpioPin<MODE, GPIONUM>

fn internal_pull_down_in_sleep_mode( &mut self, on: bool ) -> &mut GpioPin<MODE, GPIONUM>

fn enable_output_in_sleep_mode( &mut self, on: bool ) -> &mut GpioPin<MODE, GPIONUM>

fn connect_peripheral_to_output_with_options( &mut self, signal: OutputSignal, invert: bool, invert_enable: bool, enable_from_gpio: bool, force_via_gpio_mux: bool ) -> &mut GpioPin<MODE, GPIONUM>

fn disconnect_peripheral_from_output(&mut self) -> &mut GpioPin<MODE, GPIONUM>

Remove this output pin from a connected signal.

fn internal_pull_up(&mut self, on: bool) -> &mut GpioPin<MODE, GPIONUM>

fn internal_pull_down(&mut self, on: bool) -> &mut GpioPin<MODE, GPIONUM>

fn connect_peripheral_to_output(&mut self, signal: OutputSignal) -> &mut Self

impl<MODE, const GPIONUM: u8> OutputPin for GpioPin<Output<MODE>, GPIONUM>where GpioPin<Output<MODE>, GPIONUM>: GpioProperties, <GpioPin<Output<MODE>, GPIONUM> as GpioProperties>::PinType: IsOutputPin,

type Error = Infallible

Error type

fn set_high( &mut self ) -> Result<(), <GpioPin<Output<MODE>, GPIONUM> as OutputPin>::Error>

Drives the pin high

fn set_low( &mut self ) -> Result<(), <GpioPin<Output<MODE>, GPIONUM> as OutputPin>::Error>

Drives the pin low

fn set_state(&mut self, state: PinState) -> Result<(), Self::Error>

Drives the pin high or low depending on the provided value

impl<MODE, const GPIONUM: u8> Peripheral for GpioPin<MODE, GPIONUM>where GpioPin<MODE, GPIONUM>: GpioProperties,

type P = GpioPin<MODE, GPIONUM>

Peripheral singleton type

unsafe fn clone_unchecked( &mut self ) -> <GpioPin<MODE, GPIONUM> as Peripheral>::P

Unsafely clone (duplicate) a peripheral singleton.

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>where Self: 'a,

Convert a value into a PeripheralRef.

impl<MODE, const GPIONUM: u8> Pin for GpioPin<MODE, GPIONUM>where GpioPin<MODE, GPIONUM>: GpioProperties,

fn number(&self) -> u8

fn sleep_mode(&mut self, on: bool)

fn set_alternate_function(&mut self, alternate: AlternateFunction)

fn listen_with_options( &mut self, event: Event, int_enable: bool, nmi_enable: bool, wake_up_from_light_sleep: bool )

fn is_listening(&self) -> bool

fn unlisten(&mut self)

fn clear_interrupt(&mut self)

fn is_pcore_interrupt_set(&self) -> bool

fn is_pcore_non_maskable_interrupt_set(&self) -> bool

fn is_acore_interrupt_set(&self) -> bool

fn is_acore_non_maskable_interrupt_set(&self) -> bool

fn enable_hold(&mut self, _on: bool)

fn listen(&mut self, event: Event)

impl<MODE> RTCPin for GpioPin<MODE, 0>where GpioPin<MODE, 0>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 1>where GpioPin<MODE, 1>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 10>where GpioPin<MODE, 10>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 11>where GpioPin<MODE, 11>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 12>where GpioPin<MODE, 12>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 13>where GpioPin<MODE, 13>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 14>where GpioPin<MODE, 14>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 15>where GpioPin<MODE, 15>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 16>where GpioPin<MODE, 16>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 17>where GpioPin<MODE, 17>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 18>where GpioPin<MODE, 18>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 19>where GpioPin<MODE, 19>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 2>where GpioPin<MODE, 2>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 20>where GpioPin<MODE, 20>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 21>where GpioPin<MODE, 21>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 3>where GpioPin<MODE, 3>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 4>where GpioPin<MODE, 4>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 5>where GpioPin<MODE, 5>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 6>where GpioPin<MODE, 6>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 7>where GpioPin<MODE, 7>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 8>where GpioPin<MODE, 8>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE> RTCPin for GpioPin<MODE, 9>where GpioPin<MODE, 9>: GpioProperties,

fn rtc_set_config(&mut self, input_enable: bool, mux: bool, func: RtcFunction)

Set the RTC properties of the pin. If mux is true then then pin is routed to RTC, when false it is routed to IO_MUX.

fn rtc_number(&self) -> u8

impl<MODE, const GPIONUM: u8> StatefulOutputPin for GpioPin<Output<MODE>, GPIONUM>where GpioPin<Output<MODE>, GPIONUM>: GpioProperties, <GpioPin<Output<MODE>, GPIONUM> as GpioProperties>::PinType: IsOutputPin,

fn is_set_high( &self ) -> Result<bool, <GpioPin<Output<MODE>, GPIONUM> as OutputPin>::Error>

Is the pin in drive high mode?

fn is_set_low( &self ) -> Result<bool, <GpioPin<Output<MODE>, GPIONUM> as OutputPin>::Error>

Is the pin in drive low mode?

impl<MODE, const GPIONUM: u8> ToggleableOutputPin for GpioPin<Output<MODE>, GPIONUM>where GpioPin<Output<MODE>, GPIONUM>: GpioProperties, <GpioPin<Output<MODE>, GPIONUM> as GpioProperties>::PinType: IsOutputPin,

type Error = Infallible

Error type

fn toggle( &mut self ) -> Result<(), <GpioPin<Output<MODE>, GPIONUM> as ToggleableOutputPin>::Error>

Toggle pin output.

impl<MODE> TryInto<GpioPin<MODE, 0>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 0>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 0>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 1>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 1>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 1>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 10>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 10>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 10>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 11>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 11>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 11>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 12>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 12>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 12>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 13>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 13>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 13>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 14>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 14>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 14>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 15>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 15>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 15>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 16>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 16>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 16>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 17>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 17>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 17>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 18>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 18>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 18>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 19>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 19>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 19>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 2>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 2>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 2>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 20>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 20>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 20>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 21>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 21>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 21>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 26>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 26>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 26>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 27>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 27>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 27>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 28>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 28>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 28>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 29>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 29>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 29>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 3>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 3>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 3>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 30>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 30>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 30>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 31>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 31>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 31>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 32>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 32>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 32>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 33>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 33>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 33>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 34>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 34>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 34>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 35>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 35>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 35>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 36>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 36>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 36>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 37>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 37>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 37>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 38>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 38>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 38>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 39>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 39>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 39>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 4>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 4>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 4>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 40>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 40>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 40>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 41>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 41>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 41>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 42>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 42>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 42>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 43>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 43>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 43>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 44>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 44>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 44>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 45>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 45>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 45>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 46>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 46>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 46>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 47>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 47>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 47>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 48>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 48>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 48>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 5>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 5>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 5>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 6>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 6>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 6>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 7>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 7>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 7>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 8>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 8>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 8>>>::Error>

Performs the conversion.

impl<MODE> TryInto<GpioPin<MODE, 9>> for AnyPin<MODE>

type Error = ()

The type returned in the event of a conversion error.

fn try_into( self ) -> Result<GpioPin<MODE, 9>, <AnyPin<MODE> as TryInto<GpioPin<MODE, 9>>>::Error>

Performs the conversion.