Module esp32s2::rtc_cntl::sdio_conf

configure vddsdio register

Structs

R

Register SDIO_CONF reader

SDIO_CONF_SPEC

configure vddsdio register

W

Register SDIO_CONF writer

Type Definitions

DREFH_SDIO_R

Field DREFH_SDIO reader - SW option for DREFH_SDIO. Only active when reg_sdio_force = 1

DREFH_SDIO_W

Field DREFH_SDIO writer - SW option for DREFH_SDIO. Only active when reg_sdio_force = 1

DREFL_SDIO_R

Field DREFL_SDIO reader - SW option for DREFL_SDIO. Only active when reg_sdio_force = 1

DREFL_SDIO_W

Field DREFL_SDIO writer - SW option for DREFL_SDIO. Only active when reg_sdio_force = 1

DREFM_SDIO_R

Field DREFM_SDIO reader - SW option for DREFM_SDIO. Only active when reg_sdio_force = 1

DREFM_SDIO_W

Field DREFM_SDIO writer - SW option for DREFM_SDIO. Only active when reg_sdio_force = 1

REG1P8_READY_R

Field REG1P8_READY reader - read only register for REG1P8_READY

SDIO_DCAP_R

Field SDIO_DCAP reader - ability to prevent LDO from overshoot

SDIO_DCAP_W

Field SDIO_DCAP writer - ability to prevent LDO from overshoot

SDIO_DCURLIM_R

Field SDIO_DCURLIM reader - tune current limit threshold when tieh = 0. About 800mA/(8+d)

SDIO_DCURLIM_W

Field SDIO_DCURLIM writer - tune current limit threshold when tieh = 0. About 800mA/(8+d)

SDIO_DTHDRV_R

Field SDIO_DTHDRV reader - Tieh = 1 mode drive ability. Initially set to 0 to limit charge current set to 3 after several us.

SDIO_DTHDRV_W

Field SDIO_DTHDRV writer - Tieh = 1 mode drive ability. Initially set to 0 to limit charge current set to 3 after several us.

SDIO_ENCURLIM_R

Field SDIO_ENCURLIM reader - enable current limit

SDIO_ENCURLIM_W

Field SDIO_ENCURLIM writer - enable current limit

SDIO_EN_INITI_R

Field SDIO_EN_INITI reader - 0 to set init[1:0]=0

SDIO_EN_INITI_W

Field SDIO_EN_INITI writer - 0 to set init[1:0]=0

SDIO_FORCE_R

Field SDIO_FORCE reader - 1: use SW option to control SDIO_REG 0: use state machine

SDIO_FORCE_W

Field SDIO_FORCE writer - 1: use SW option to control SDIO_REG 0: use state machine

SDIO_INITI_R

Field SDIO_INITI reader - add resistor from ldo output to ground. 0: no res 1: 6k 2: 4k 3: 2k

SDIO_INITI_W

Field SDIO_INITI writer - add resistor from ldo output to ground. 0: no res 1: 6k 2: 4k 3: 2k

SDIO_MODECURLIM_R

Field SDIO_MODECURLIM reader - select current limit mode

SDIO_MODECURLIM_W

Field SDIO_MODECURLIM writer - select current limit mode

SDIO_REG_PD_EN_R

Field SDIO_REG_PD_EN reader - power down SDIO_REG in sleep. Only active when reg_sdio_force = 0

SDIO_REG_PD_EN_W

Field SDIO_REG_PD_EN writer - power down SDIO_REG in sleep. Only active when reg_sdio_force = 0

SDIO_TIEH_R

Field SDIO_TIEH reader - SW option for SDIO_TIEH. Only active when reg_sdio_force = 1

SDIO_TIEH_W

Field SDIO_TIEH writer - SW option for SDIO_TIEH. Only active when reg_sdio_force = 1

SDIO_TIMER_TARGET_R

Field SDIO_TIMER_TARGET reader - timer count to apply reg_sdio_dcap after sdio power on

SDIO_TIMER_TARGET_W

Field SDIO_TIMER_TARGET writer - timer count to apply reg_sdio_dcap after sdio power on

XPD_SDIO_R

Field XPD_SDIO reader - SW option for XPD_VOOSDIO. Only active when reg_sdio_force = 1

XPD_SDIO_W

Field XPD_SDIO writer - SW option for XPD_VOOSDIO. Only active when reg_sdio_force = 1