Module esp32s2::uart0

source · [−]
Expand description

UART (Universal Asynchronous Receiver-Transmitter) Controller

Modules

at_cmd_char
AT escape sequence selection configuration
at_cmd_gaptout
Timeout configuration
at_cmd_postcnt
Post-sequence timing configuration
at_cmd_precnt
Pre-sequence timing configuration
autobaud
Autobaud configuration register
clkdiv
Clock divider configuration
conf0
Configuration register 0
conf1
Configuration register 1
date
UART version control register
fifo
FIFO data register
flow_conf
Software flow control configuration
fsm_status
UART transmitter and receiver status
highpulse
Autobaud minimum high pulse duration register
id
UART ID register
idle_conf
Frame end idle time configuration
int_clr
Interrupt clear bits
int_ena
Interrupt enable bits
int_raw
Raw interrupt status
int_st
Masked interrupt status
lowpulse
Autobaud minimum low pulse duration register
mem_conf
UART threshold and allocation configuration
mem_rx_status
RX FIFO write and read offset address
mem_tx_status
TX FIFO write and read offset address
negpulse
Autobaud low pulse register
pospulse
Autobaud high pulse register
rs485_conf
RS485 mode configuration
rxd_cnt
Autobaud edge change count register
sleep_conf
Sleep mode configuration
status
UART status register
swfc_conf0
Software flow control character configuration
swfc_conf1
Software flow-control character configuration

Structs

RegisterBlock
Register block

Type Definitions

AT_CMD_CHAR
AT_CMD_CHAR (rw) register accessor: an alias for Reg<AT_CMD_CHAR_SPEC>
AT_CMD_GAPTOUT
AT_CMD_GAPTOUT (rw) register accessor: an alias for Reg<AT_CMD_GAPTOUT_SPEC>
AT_CMD_POSTCNT
AT_CMD_POSTCNT (rw) register accessor: an alias for Reg<AT_CMD_POSTCNT_SPEC>
AT_CMD_PRECNT
AT_CMD_PRECNT (rw) register accessor: an alias for Reg<AT_CMD_PRECNT_SPEC>
AUTOBAUD
AUTOBAUD (rw) register accessor: an alias for Reg<AUTOBAUD_SPEC>
CLKDIV
CLKDIV (rw) register accessor: an alias for Reg<CLKDIV_SPEC>
CONF0
CONF0 (rw) register accessor: an alias for Reg<CONF0_SPEC>
CONF1
CONF1 (rw) register accessor: an alias for Reg<CONF1_SPEC>
DATE
DATE (rw) register accessor: an alias for Reg<DATE_SPEC>
FIFO
FIFO (rw) register accessor: an alias for Reg<FIFO_SPEC>
FLOW_CONF
FLOW_CONF (rw) register accessor: an alias for Reg<FLOW_CONF_SPEC>
FSM_STATUS
FSM_STATUS (r) register accessor: an alias for Reg<FSM_STATUS_SPEC>
HIGHPULSE
HIGHPULSE (r) register accessor: an alias for Reg<HIGHPULSE_SPEC>
ID
ID (rw) register accessor: an alias for Reg<ID_SPEC>
IDLE_CONF
IDLE_CONF (rw) register accessor: an alias for Reg<IDLE_CONF_SPEC>
INT_CLR
INT_CLR (w) register accessor: an alias for Reg<INT_CLR_SPEC>
INT_ENA
INT_ENA (rw) register accessor: an alias for Reg<INT_ENA_SPEC>
INT_RAW
INT_RAW (r) register accessor: an alias for Reg<INT_RAW_SPEC>
INT_ST
INT_ST (r) register accessor: an alias for Reg<INT_ST_SPEC>
LOWPULSE
LOWPULSE (r) register accessor: an alias for Reg<LOWPULSE_SPEC>
MEM_CONF
MEM_CONF (rw) register accessor: an alias for Reg<MEM_CONF_SPEC>
MEM_RX_STATUS
MEM_RX_STATUS (r) register accessor: an alias for Reg<MEM_RX_STATUS_SPEC>
MEM_TX_STATUS
MEM_TX_STATUS (r) register accessor: an alias for Reg<MEM_TX_STATUS_SPEC>
NEGPULSE
NEGPULSE (r) register accessor: an alias for Reg<NEGPULSE_SPEC>
POSPULSE
POSPULSE (r) register accessor: an alias for Reg<POSPULSE_SPEC>
RS485_CONF
RS485_CONF (rw) register accessor: an alias for Reg<RS485_CONF_SPEC>
RXD_CNT
RXD_CNT (r) register accessor: an alias for Reg<RXD_CNT_SPEC>
SLEEP_CONF
SLEEP_CONF (rw) register accessor: an alias for Reg<SLEEP_CONF_SPEC>
STATUS
STATUS (r) register accessor: an alias for Reg<STATUS_SPEC>
SWFC_CONF0
SWFC_CONF0 (rw) register accessor: an alias for Reg<SWFC_CONF0_SPEC>
SWFC_CONF1
SWFC_CONF1 (rw) register accessor: an alias for Reg<SWFC_CONF1_SPEC>