#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
bt_select: BT_SELECT,
out: OUT,
out_w1ts: OUT_W1TS,
out_w1tc: OUT_W1TC,
out1: OUT1,
out1_w1ts: OUT1_W1TS,
out1_w1tc: OUT1_W1TC,
sdio_select: SDIO_SELECT,
enable: ENABLE,
enable_w1ts: ENABLE_W1TS,
enable_w1tc: ENABLE_W1TC,
enable1: ENABLE1,
enable1_w1ts: ENABLE1_W1TS,
enable1_w1tc: ENABLE1_W1TC,
strap: STRAP,
in_: IN,
in1: IN1,
status: STATUS,
status_w1ts: STATUS_W1TS,
status_w1tc: STATUS_W1TC,
status1: STATUS1,
status1_w1ts: STATUS1_W1TS,
status1_w1tc: STATUS1_W1TC,
pcpu_int: PCPU_INT,
pcpu_nmi_int: PCPU_NMI_INT,
cpusdio_int: CPUSDIO_INT,
pcpu_int1: PCPU_INT1,
pcpu_nmi_int1: PCPU_NMI_INT1,
cpusdio_int1: CPUSDIO_INT1,
pin: [PIN; 54],
status_next: STATUS_NEXT,
status_next1: STATUS_NEXT1,
func_in_sel_cfg: [FUNC_IN_SEL_CFG; 256],
func_out_sel_cfg: [FUNC_OUT_SEL_CFG; 54],
clock_gate: CLOCK_GATE,
_reserved35: [u8; 0xcc],
reg_date: REG_DATE,
}
impl RegisterBlock {
#[doc = "0x00 - GPIO bit select register"]
#[inline(always)]
pub const fn bt_select(&self) -> &BT_SELECT {
&self.bt_select
}
#[doc = "0x04 - GPIO0 ~ 31 output register"]
#[inline(always)]
pub const fn out(&self) -> &OUT {
&self.out
}
#[doc = "0x08 - GPIO0 ~ 31 output bit set register"]
#[inline(always)]
pub const fn out_w1ts(&self) -> &OUT_W1TS {
&self.out_w1ts
}
#[doc = "0x0c - GPIO0 ~ 31 output bit clear register"]
#[inline(always)]
pub const fn out_w1tc(&self) -> &OUT_W1TC {
&self.out_w1tc
}
#[doc = "0x10 - GPIO32 ~ 53 output register"]
#[inline(always)]
pub const fn out1(&self) -> &OUT1 {
&self.out1
}
#[doc = "0x14 - GPIO32 ~ 53 output bit set register"]
#[inline(always)]
pub const fn out1_w1ts(&self) -> &OUT1_W1TS {
&self.out1_w1ts
}
#[doc = "0x18 - GPIO32 ~ 53 output bit clear register"]
#[inline(always)]
pub const fn out1_w1tc(&self) -> &OUT1_W1TC {
&self.out1_w1tc
}
#[doc = "0x1c - GPIO SDIO selection register"]
#[inline(always)]
pub const fn sdio_select(&self) -> &SDIO_SELECT {
&self.sdio_select
}
#[doc = "0x20 - GPIO0 ~ 31 output enable register"]
#[inline(always)]
pub const fn enable(&self) -> &ENABLE {
&self.enable
}
#[doc = "0x24 - GPIO0 ~ 31 output enable bit set register"]
#[inline(always)]
pub const fn enable_w1ts(&self) -> &ENABLE_W1TS {
&self.enable_w1ts
}
#[doc = "0x28 - GPIO0 ~ 31 output enable bit clear register"]
#[inline(always)]
pub const fn enable_w1tc(&self) -> &ENABLE_W1TC {
&self.enable_w1tc
}
#[doc = "0x2c - GPIO32 ~ 53 output enable register"]
#[inline(always)]
pub const fn enable1(&self) -> &ENABLE1 {
&self.enable1
}
#[doc = "0x30 - GPIO32 ~ 53 output enable bit set register"]
#[inline(always)]
pub const fn enable1_w1ts(&self) -> &ENABLE1_W1TS {
&self.enable1_w1ts
}
#[doc = "0x34 - GPIO32 ~ 53 output enable bit clear register"]
#[inline(always)]
pub const fn enable1_w1tc(&self) -> &ENABLE1_W1TC {
&self.enable1_w1tc
}
#[doc = "0x38 - Bootstrap pin value register"]
#[inline(always)]
pub const fn strap(&self) -> &STRAP {
&self.strap
}
#[doc = "0x3c - GPIO0 ~ 31 input register"]
#[inline(always)]
pub const fn in_(&self) -> &IN {
&self.in_
}
#[doc = "0x40 - GPIO32 ~ 53 input register"]
#[inline(always)]
pub const fn in1(&self) -> &IN1 {
&self.in1
}
#[doc = "0x44 - GPIO0 ~ 31 interrupt status register"]
#[inline(always)]
pub const fn status(&self) -> &STATUS {
&self.status
}
#[doc = "0x48 - GPIO0 ~ 31 interrupt status bit set register"]
#[inline(always)]
pub const fn status_w1ts(&self) -> &STATUS_W1TS {
&self.status_w1ts
}
#[doc = "0x4c - GPIO0 ~ 31 interrupt status bit clear register"]
#[inline(always)]
pub const fn status_w1tc(&self) -> &STATUS_W1TC {
&self.status_w1tc
}
#[doc = "0x50 - GPIO32 ~ 53 interrupt status register"]
#[inline(always)]
pub const fn status1(&self) -> &STATUS1 {
&self.status1
}
#[doc = "0x54 - GPIO32 ~ 53 interrupt status bit set register"]
#[inline(always)]
pub const fn status1_w1ts(&self) -> &STATUS1_W1TS {
&self.status1_w1ts
}
#[doc = "0x58 - GPIO32 ~ 53 interrupt status bit clear register"]
#[inline(always)]
pub const fn status1_w1tc(&self) -> &STATUS1_W1TC {
&self.status1_w1tc
}
#[doc = "0x5c - GPIO0 ~ 31 PRO_CPU interrupt status register"]
#[inline(always)]
pub const fn pcpu_int(&self) -> &PCPU_INT {
&self.pcpu_int
}
#[doc = "0x60 - GPIO0 ~ 31 PRO_CPU non-maskable interrupt status register"]
#[inline(always)]
pub const fn pcpu_nmi_int(&self) -> &PCPU_NMI_INT {
&self.pcpu_nmi_int
}
#[doc = "0x64 - GPIO0 ~ 31 CPU SDIO interrupt status register"]
#[inline(always)]
pub const fn cpusdio_int(&self) -> &CPUSDIO_INT {
&self.cpusdio_int
}
#[doc = "0x68 - GPIO32 ~ 53 PRO_CPU interrupt status register"]
#[inline(always)]
pub const fn pcpu_int1(&self) -> &PCPU_INT1 {
&self.pcpu_int1
}
#[doc = "0x6c - GPIO32 ~ 53 PRO_CPU non-maskable interrupt status register"]
#[inline(always)]
pub const fn pcpu_nmi_int1(&self) -> &PCPU_NMI_INT1 {
&self.pcpu_nmi_int1
}
#[doc = "0x70 - GPIO32 ~ 53 CPU SDIO interrupt status register"]
#[inline(always)]
pub const fn cpusdio_int1(&self) -> &CPUSDIO_INT1 {
&self.cpusdio_int1
}
#[doc = "0x74..0x14c - Configuration for GPIO pin %s"]
#[inline(always)]
pub const fn pin(&self, n: usize) -> &PIN {
&self.pin[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x74..0x14c - Configuration for GPIO pin %s"]
#[inline(always)]
pub fn pin_iter(&self) -> impl Iterator<Item = &PIN> {
self.pin.iter()
}
#[doc = "0x14c - GPIO0 ~ 31 interrupt source register"]
#[inline(always)]
pub const fn status_next(&self) -> &STATUS_NEXT {
&self.status_next
}
#[doc = "0x150 - GPIO32 ~ 53 interrupt source register"]
#[inline(always)]
pub const fn status_next1(&self) -> &STATUS_NEXT1 {
&self.status_next1
}
#[doc = "0x154..0x554 - Peripheral function %s input selection register"]
#[inline(always)]
pub const fn func_in_sel_cfg(&self, n: usize) -> &FUNC_IN_SEL_CFG {
&self.func_in_sel_cfg[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x154..0x554 - Peripheral function %s input selection register"]
#[inline(always)]
pub fn func_in_sel_cfg_iter(&self) -> impl Iterator<Item = &FUNC_IN_SEL_CFG> {
self.func_in_sel_cfg.iter()
}
#[doc = "0x154 - Peripheral function 0 input selection register"]
#[inline(always)]
pub const fn func0_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(0)
}
#[doc = "0x158 - Peripheral function 1 input selection register"]
#[inline(always)]
pub const fn func1_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(1)
}
#[doc = "0x15c - Peripheral function 2 input selection register"]
#[inline(always)]
pub const fn func2_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(2)
}
#[doc = "0x160 - Peripheral function 3 input selection register"]
#[inline(always)]
pub const fn func3_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(3)
}
#[doc = "0x164 - Peripheral function 4 input selection register"]
#[inline(always)]
pub const fn func4_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(4)
}
#[doc = "0x168 - Peripheral function 5 input selection register"]
#[inline(always)]
pub const fn func5_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(5)
}
#[doc = "0x16c - Peripheral function 6 input selection register"]
#[inline(always)]
pub const fn func6_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(6)
}
#[doc = "0x170 - Peripheral function 7 input selection register"]
#[inline(always)]
pub const fn func7_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(7)
}
#[doc = "0x174 - Peripheral function 8 input selection register"]
#[inline(always)]
pub const fn func8_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(8)
}
#[doc = "0x178 - Peripheral function 9 input selection register"]
#[inline(always)]
pub const fn func9_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(9)
}
#[doc = "0x17c - Peripheral function 10 input selection register"]
#[inline(always)]
pub const fn func10_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(10)
}
#[doc = "0x180 - Peripheral function 11 input selection register"]
#[inline(always)]
pub const fn func11_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(11)
}
#[doc = "0x184 - Peripheral function 12 input selection register"]
#[inline(always)]
pub const fn func12_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(12)
}
#[doc = "0x188 - Peripheral function 13 input selection register"]
#[inline(always)]
pub const fn func13_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(13)
}
#[doc = "0x18c - Peripheral function 14 input selection register"]
#[inline(always)]
pub const fn func14_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(14)
}
#[doc = "0x190 - Peripheral function 15 input selection register"]
#[inline(always)]
pub const fn func15_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(15)
}
#[doc = "0x194 - Peripheral function 16 input selection register"]
#[inline(always)]
pub const fn func16_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(16)
}
#[doc = "0x198 - Peripheral function 17 input selection register"]
#[inline(always)]
pub const fn func17_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(17)
}
#[doc = "0x19c - Peripheral function 18 input selection register"]
#[inline(always)]
pub const fn func18_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(18)
}
#[doc = "0x1a0 - Peripheral function 19 input selection register"]
#[inline(always)]
pub const fn func19_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(19)
}
#[doc = "0x1a4 - Peripheral function 20 input selection register"]
#[inline(always)]
pub const fn func20_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(20)
}
#[doc = "0x1a8 - Peripheral function 21 input selection register"]
#[inline(always)]
pub const fn func21_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(21)
}
#[doc = "0x1ac - Peripheral function 22 input selection register"]
#[inline(always)]
pub const fn func22_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(22)
}
#[doc = "0x1b0 - Peripheral function 23 input selection register"]
#[inline(always)]
pub const fn func23_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(23)
}
#[doc = "0x1b4 - Peripheral function 24 input selection register"]
#[inline(always)]
pub const fn func24_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(24)
}
#[doc = "0x1b8 - Peripheral function 25 input selection register"]
#[inline(always)]
pub const fn func25_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(25)
}
#[doc = "0x1bc - Peripheral function 26 input selection register"]
#[inline(always)]
pub const fn func26_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(26)
}
#[doc = "0x1c0 - Peripheral function 27 input selection register"]
#[inline(always)]
pub const fn func27_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(27)
}
#[doc = "0x1c4 - Peripheral function 28 input selection register"]
#[inline(always)]
pub const fn func28_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(28)
}
#[doc = "0x1c8 - Peripheral function 29 input selection register"]
#[inline(always)]
pub const fn func29_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(29)
}
#[doc = "0x1cc - Peripheral function 30 input selection register"]
#[inline(always)]
pub const fn func30_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(30)
}
#[doc = "0x1d0 - Peripheral function 31 input selection register"]
#[inline(always)]
pub const fn func31_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(31)
}
#[doc = "0x1d4 - Peripheral function 32 input selection register"]
#[inline(always)]
pub const fn func32_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(32)
}
#[doc = "0x1d8 - Peripheral function 33 input selection register"]
#[inline(always)]
pub const fn func33_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(33)
}
#[doc = "0x1dc - Peripheral function 34 input selection register"]
#[inline(always)]
pub const fn func34_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(34)
}
#[doc = "0x1e0 - Peripheral function 35 input selection register"]
#[inline(always)]
pub const fn func35_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(35)
}
#[doc = "0x1e4 - Peripheral function 36 input selection register"]
#[inline(always)]
pub const fn func36_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(36)
}
#[doc = "0x1e8 - Peripheral function 37 input selection register"]
#[inline(always)]
pub const fn func37_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(37)
}
#[doc = "0x1ec - Peripheral function 38 input selection register"]
#[inline(always)]
pub const fn func38_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(38)
}
#[doc = "0x1f0 - Peripheral function 39 input selection register"]
#[inline(always)]
pub const fn func39_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(39)
}
#[doc = "0x1f4 - Peripheral function 40 input selection register"]
#[inline(always)]
pub const fn func40_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(40)
}
#[doc = "0x1f8 - Peripheral function 41 input selection register"]
#[inline(always)]
pub const fn func41_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(41)
}
#[doc = "0x1fc - Peripheral function 42 input selection register"]
#[inline(always)]
pub const fn func42_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(42)
}
#[doc = "0x200 - Peripheral function 43 input selection register"]
#[inline(always)]
pub const fn func43_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(43)
}
#[doc = "0x204 - Peripheral function 44 input selection register"]
#[inline(always)]
pub const fn func44_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(44)
}
#[doc = "0x208 - Peripheral function 45 input selection register"]
#[inline(always)]
pub const fn func45_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(45)
}
#[doc = "0x20c - Peripheral function 46 input selection register"]
#[inline(always)]
pub const fn func46_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(46)
}
#[doc = "0x210 - Peripheral function 47 input selection register"]
#[inline(always)]
pub const fn func47_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(47)
}
#[doc = "0x214 - Peripheral function 48 input selection register"]
#[inline(always)]
pub const fn func48_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(48)
}
#[doc = "0x218 - Peripheral function 49 input selection register"]
#[inline(always)]
pub const fn func49_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(49)
}
#[doc = "0x21c - Peripheral function 50 input selection register"]
#[inline(always)]
pub const fn func50_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(50)
}
#[doc = "0x220 - Peripheral function 51 input selection register"]
#[inline(always)]
pub const fn func51_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(51)
}
#[doc = "0x224 - Peripheral function 52 input selection register"]
#[inline(always)]
pub const fn func52_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(52)
}
#[doc = "0x228 - Peripheral function 53 input selection register"]
#[inline(always)]
pub const fn func53_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(53)
}
#[doc = "0x22c - Peripheral function 54 input selection register"]
#[inline(always)]
pub const fn func54_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(54)
}
#[doc = "0x230 - Peripheral function 55 input selection register"]
#[inline(always)]
pub const fn func55_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(55)
}
#[doc = "0x234 - Peripheral function 56 input selection register"]
#[inline(always)]
pub const fn func56_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(56)
}
#[doc = "0x238 - Peripheral function 57 input selection register"]
#[inline(always)]
pub const fn func57_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(57)
}
#[doc = "0x23c - Peripheral function 58 input selection register"]
#[inline(always)]
pub const fn func58_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(58)
}
#[doc = "0x240 - Peripheral function 59 input selection register"]
#[inline(always)]
pub const fn func59_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(59)
}
#[doc = "0x244 - Peripheral function 60 input selection register"]
#[inline(always)]
pub const fn func60_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(60)
}
#[doc = "0x248 - Peripheral function 61 input selection register"]
#[inline(always)]
pub const fn func61_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(61)
}
#[doc = "0x24c - Peripheral function 62 input selection register"]
#[inline(always)]
pub const fn func62_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(62)
}
#[doc = "0x250 - Peripheral function 63 input selection register"]
#[inline(always)]
pub const fn func63_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(63)
}
#[doc = "0x254 - Peripheral function 64 input selection register"]
#[inline(always)]
pub const fn func64_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(64)
}
#[doc = "0x258 - Peripheral function 65 input selection register"]
#[inline(always)]
pub const fn func65_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(65)
}
#[doc = "0x25c - Peripheral function 66 input selection register"]
#[inline(always)]
pub const fn func66_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(66)
}
#[doc = "0x260 - Peripheral function 67 input selection register"]
#[inline(always)]
pub const fn func67_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(67)
}
#[doc = "0x264 - Peripheral function 68 input selection register"]
#[inline(always)]
pub const fn func68_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(68)
}
#[doc = "0x268 - Peripheral function 69 input selection register"]
#[inline(always)]
pub const fn func69_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(69)
}
#[doc = "0x26c - Peripheral function 70 input selection register"]
#[inline(always)]
pub const fn func70_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(70)
}
#[doc = "0x270 - Peripheral function 71 input selection register"]
#[inline(always)]
pub const fn func71_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(71)
}
#[doc = "0x274 - Peripheral function 72 input selection register"]
#[inline(always)]
pub const fn func72_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(72)
}
#[doc = "0x278 - Peripheral function 73 input selection register"]
#[inline(always)]
pub const fn func73_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(73)
}
#[doc = "0x27c - Peripheral function 74 input selection register"]
#[inline(always)]
pub const fn func74_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(74)
}
#[doc = "0x280 - Peripheral function 75 input selection register"]
#[inline(always)]
pub const fn func75_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(75)
}
#[doc = "0x284 - Peripheral function 76 input selection register"]
#[inline(always)]
pub const fn func76_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(76)
}
#[doc = "0x288 - Peripheral function 77 input selection register"]
#[inline(always)]
pub const fn func77_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(77)
}
#[doc = "0x28c - Peripheral function 78 input selection register"]
#[inline(always)]
pub const fn func78_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(78)
}
#[doc = "0x290 - Peripheral function 79 input selection register"]
#[inline(always)]
pub const fn func79_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(79)
}
#[doc = "0x294 - Peripheral function 80 input selection register"]
#[inline(always)]
pub const fn func80_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(80)
}
#[doc = "0x298 - Peripheral function 81 input selection register"]
#[inline(always)]
pub const fn func81_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(81)
}
#[doc = "0x29c - Peripheral function 82 input selection register"]
#[inline(always)]
pub const fn func82_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(82)
}
#[doc = "0x2a0 - Peripheral function 83 input selection register"]
#[inline(always)]
pub const fn func83_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(83)
}
#[doc = "0x2a4 - Peripheral function 84 input selection register"]
#[inline(always)]
pub const fn func84_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(84)
}
#[doc = "0x2a8 - Peripheral function 85 input selection register"]
#[inline(always)]
pub const fn func85_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(85)
}
#[doc = "0x2ac - Peripheral function 86 input selection register"]
#[inline(always)]
pub const fn func86_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(86)
}
#[doc = "0x2b0 - Peripheral function 87 input selection register"]
#[inline(always)]
pub const fn func87_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(87)
}
#[doc = "0x2b4 - Peripheral function 88 input selection register"]
#[inline(always)]
pub const fn func88_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(88)
}
#[doc = "0x2b8 - Peripheral function 89 input selection register"]
#[inline(always)]
pub const fn func89_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(89)
}
#[doc = "0x2bc - Peripheral function 90 input selection register"]
#[inline(always)]
pub const fn func90_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(90)
}
#[doc = "0x2c0 - Peripheral function 91 input selection register"]
#[inline(always)]
pub const fn func91_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(91)
}
#[doc = "0x2c4 - Peripheral function 92 input selection register"]
#[inline(always)]
pub const fn func92_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(92)
}
#[doc = "0x2c8 - Peripheral function 93 input selection register"]
#[inline(always)]
pub const fn func93_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(93)
}
#[doc = "0x2cc - Peripheral function 94 input selection register"]
#[inline(always)]
pub const fn func94_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(94)
}
#[doc = "0x2d0 - Peripheral function 95 input selection register"]
#[inline(always)]
pub const fn func95_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(95)
}
#[doc = "0x2d4 - Peripheral function 96 input selection register"]
#[inline(always)]
pub const fn func96_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(96)
}
#[doc = "0x2d8 - Peripheral function 97 input selection register"]
#[inline(always)]
pub const fn func97_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(97)
}
#[doc = "0x2dc - Peripheral function 98 input selection register"]
#[inline(always)]
pub const fn func98_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(98)
}
#[doc = "0x2e0 - Peripheral function 99 input selection register"]
#[inline(always)]
pub const fn func99_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(99)
}
#[doc = "0x2e4 - Peripheral function 100 input selection register"]
#[inline(always)]
pub const fn func100_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(100)
}
#[doc = "0x2e8 - Peripheral function 101 input selection register"]
#[inline(always)]
pub const fn func101_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(101)
}
#[doc = "0x2ec - Peripheral function 102 input selection register"]
#[inline(always)]
pub const fn func102_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(102)
}
#[doc = "0x2f0 - Peripheral function 103 input selection register"]
#[inline(always)]
pub const fn func103_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(103)
}
#[doc = "0x2f4 - Peripheral function 104 input selection register"]
#[inline(always)]
pub const fn func104_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(104)
}
#[doc = "0x2f8 - Peripheral function 105 input selection register"]
#[inline(always)]
pub const fn func105_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(105)
}
#[doc = "0x2fc - Peripheral function 106 input selection register"]
#[inline(always)]
pub const fn func106_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(106)
}
#[doc = "0x300 - Peripheral function 107 input selection register"]
#[inline(always)]
pub const fn func107_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(107)
}
#[doc = "0x304 - Peripheral function 108 input selection register"]
#[inline(always)]
pub const fn func108_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(108)
}
#[doc = "0x308 - Peripheral function 109 input selection register"]
#[inline(always)]
pub const fn func109_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(109)
}
#[doc = "0x30c - Peripheral function 110 input selection register"]
#[inline(always)]
pub const fn func110_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(110)
}
#[doc = "0x310 - Peripheral function 111 input selection register"]
#[inline(always)]
pub const fn func111_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(111)
}
#[doc = "0x314 - Peripheral function 112 input selection register"]
#[inline(always)]
pub const fn func112_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(112)
}
#[doc = "0x318 - Peripheral function 113 input selection register"]
#[inline(always)]
pub const fn func113_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(113)
}
#[doc = "0x31c - Peripheral function 114 input selection register"]
#[inline(always)]
pub const fn func114_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(114)
}
#[doc = "0x320 - Peripheral function 115 input selection register"]
#[inline(always)]
pub const fn func115_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(115)
}
#[doc = "0x324 - Peripheral function 116 input selection register"]
#[inline(always)]
pub const fn func116_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(116)
}
#[doc = "0x328 - Peripheral function 117 input selection register"]
#[inline(always)]
pub const fn func117_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(117)
}
#[doc = "0x32c - Peripheral function 118 input selection register"]
#[inline(always)]
pub const fn func118_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(118)
}
#[doc = "0x330 - Peripheral function 119 input selection register"]
#[inline(always)]
pub const fn func119_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(119)
}
#[doc = "0x334 - Peripheral function 120 input selection register"]
#[inline(always)]
pub const fn func120_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(120)
}
#[doc = "0x338 - Peripheral function 121 input selection register"]
#[inline(always)]
pub const fn func121_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(121)
}
#[doc = "0x33c - Peripheral function 122 input selection register"]
#[inline(always)]
pub const fn func122_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(122)
}
#[doc = "0x340 - Peripheral function 123 input selection register"]
#[inline(always)]
pub const fn func123_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(123)
}
#[doc = "0x344 - Peripheral function 124 input selection register"]
#[inline(always)]
pub const fn func124_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(124)
}
#[doc = "0x348 - Peripheral function 125 input selection register"]
#[inline(always)]
pub const fn func125_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(125)
}
#[doc = "0x34c - Peripheral function 126 input selection register"]
#[inline(always)]
pub const fn func126_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(126)
}
#[doc = "0x350 - Peripheral function 127 input selection register"]
#[inline(always)]
pub const fn func127_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(127)
}
#[doc = "0x354 - Peripheral function 128 input selection register"]
#[inline(always)]
pub const fn func128_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(128)
}
#[doc = "0x358 - Peripheral function 129 input selection register"]
#[inline(always)]
pub const fn func129_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(129)
}
#[doc = "0x35c - Peripheral function 130 input selection register"]
#[inline(always)]
pub const fn func130_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(130)
}
#[doc = "0x360 - Peripheral function 131 input selection register"]
#[inline(always)]
pub const fn func131_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(131)
}
#[doc = "0x364 - Peripheral function 132 input selection register"]
#[inline(always)]
pub const fn func132_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(132)
}
#[doc = "0x368 - Peripheral function 133 input selection register"]
#[inline(always)]
pub const fn func133_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(133)
}
#[doc = "0x36c - Peripheral function 134 input selection register"]
#[inline(always)]
pub const fn func134_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(134)
}
#[doc = "0x370 - Peripheral function 135 input selection register"]
#[inline(always)]
pub const fn func135_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(135)
}
#[doc = "0x374 - Peripheral function 136 input selection register"]
#[inline(always)]
pub const fn func136_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(136)
}
#[doc = "0x378 - Peripheral function 137 input selection register"]
#[inline(always)]
pub const fn func137_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(137)
}
#[doc = "0x37c - Peripheral function 138 input selection register"]
#[inline(always)]
pub const fn func138_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(138)
}
#[doc = "0x380 - Peripheral function 139 input selection register"]
#[inline(always)]
pub const fn func139_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(139)
}
#[doc = "0x384 - Peripheral function 140 input selection register"]
#[inline(always)]
pub const fn func140_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(140)
}
#[doc = "0x388 - Peripheral function 141 input selection register"]
#[inline(always)]
pub const fn func141_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(141)
}
#[doc = "0x38c - Peripheral function 142 input selection register"]
#[inline(always)]
pub const fn func142_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(142)
}
#[doc = "0x390 - Peripheral function 143 input selection register"]
#[inline(always)]
pub const fn func143_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(143)
}
#[doc = "0x394 - Peripheral function 144 input selection register"]
#[inline(always)]
pub const fn func144_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(144)
}
#[doc = "0x398 - Peripheral function 145 input selection register"]
#[inline(always)]
pub const fn func145_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(145)
}
#[doc = "0x39c - Peripheral function 146 input selection register"]
#[inline(always)]
pub const fn func146_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(146)
}
#[doc = "0x3a0 - Peripheral function 147 input selection register"]
#[inline(always)]
pub const fn func147_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(147)
}
#[doc = "0x3a4 - Peripheral function 148 input selection register"]
#[inline(always)]
pub const fn func148_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(148)
}
#[doc = "0x3a8 - Peripheral function 149 input selection register"]
#[inline(always)]
pub const fn func149_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(149)
}
#[doc = "0x3ac - Peripheral function 150 input selection register"]
#[inline(always)]
pub const fn func150_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(150)
}
#[doc = "0x3b0 - Peripheral function 151 input selection register"]
#[inline(always)]
pub const fn func151_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(151)
}
#[doc = "0x3b4 - Peripheral function 152 input selection register"]
#[inline(always)]
pub const fn func152_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(152)
}
#[doc = "0x3b8 - Peripheral function 153 input selection register"]
#[inline(always)]
pub const fn func153_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(153)
}
#[doc = "0x3bc - Peripheral function 154 input selection register"]
#[inline(always)]
pub const fn func154_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(154)
}
#[doc = "0x3c0 - Peripheral function 155 input selection register"]
#[inline(always)]
pub const fn func155_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(155)
}
#[doc = "0x3c4 - Peripheral function 156 input selection register"]
#[inline(always)]
pub const fn func156_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(156)
}
#[doc = "0x3c8 - Peripheral function 157 input selection register"]
#[inline(always)]
pub const fn func157_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(157)
}
#[doc = "0x3cc - Peripheral function 158 input selection register"]
#[inline(always)]
pub const fn func158_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(158)
}
#[doc = "0x3d0 - Peripheral function 159 input selection register"]
#[inline(always)]
pub const fn func159_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(159)
}
#[doc = "0x3d4 - Peripheral function 160 input selection register"]
#[inline(always)]
pub const fn func160_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(160)
}
#[doc = "0x3d8 - Peripheral function 161 input selection register"]
#[inline(always)]
pub const fn func161_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(161)
}
#[doc = "0x3dc - Peripheral function 162 input selection register"]
#[inline(always)]
pub const fn func162_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(162)
}
#[doc = "0x3e0 - Peripheral function 163 input selection register"]
#[inline(always)]
pub const fn func163_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(163)
}
#[doc = "0x3e4 - Peripheral function 164 input selection register"]
#[inline(always)]
pub const fn func164_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(164)
}
#[doc = "0x3e8 - Peripheral function 165 input selection register"]
#[inline(always)]
pub const fn func165_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(165)
}
#[doc = "0x3ec - Peripheral function 166 input selection register"]
#[inline(always)]
pub const fn func166_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(166)
}
#[doc = "0x3f0 - Peripheral function 167 input selection register"]
#[inline(always)]
pub const fn func167_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(167)
}
#[doc = "0x3f4 - Peripheral function 168 input selection register"]
#[inline(always)]
pub const fn func168_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(168)
}
#[doc = "0x3f8 - Peripheral function 169 input selection register"]
#[inline(always)]
pub const fn func169_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(169)
}
#[doc = "0x3fc - Peripheral function 170 input selection register"]
#[inline(always)]
pub const fn func170_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(170)
}
#[doc = "0x400 - Peripheral function 171 input selection register"]
#[inline(always)]
pub const fn func171_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(171)
}
#[doc = "0x404 - Peripheral function 172 input selection register"]
#[inline(always)]
pub const fn func172_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(172)
}
#[doc = "0x408 - Peripheral function 173 input selection register"]
#[inline(always)]
pub const fn func173_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(173)
}
#[doc = "0x40c - Peripheral function 174 input selection register"]
#[inline(always)]
pub const fn func174_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(174)
}
#[doc = "0x410 - Peripheral function 175 input selection register"]
#[inline(always)]
pub const fn func175_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(175)
}
#[doc = "0x414 - Peripheral function 176 input selection register"]
#[inline(always)]
pub const fn func176_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(176)
}
#[doc = "0x418 - Peripheral function 177 input selection register"]
#[inline(always)]
pub const fn func177_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(177)
}
#[doc = "0x41c - Peripheral function 178 input selection register"]
#[inline(always)]
pub const fn func178_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(178)
}
#[doc = "0x420 - Peripheral function 179 input selection register"]
#[inline(always)]
pub const fn func179_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(179)
}
#[doc = "0x424 - Peripheral function 180 input selection register"]
#[inline(always)]
pub const fn func180_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(180)
}
#[doc = "0x428 - Peripheral function 181 input selection register"]
#[inline(always)]
pub const fn func181_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(181)
}
#[doc = "0x42c - Peripheral function 182 input selection register"]
#[inline(always)]
pub const fn func182_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(182)
}
#[doc = "0x430 - Peripheral function 183 input selection register"]
#[inline(always)]
pub const fn func183_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(183)
}
#[doc = "0x434 - Peripheral function 184 input selection register"]
#[inline(always)]
pub const fn func184_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(184)
}
#[doc = "0x438 - Peripheral function 185 input selection register"]
#[inline(always)]
pub const fn func185_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(185)
}
#[doc = "0x43c - Peripheral function 186 input selection register"]
#[inline(always)]
pub const fn func186_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(186)
}
#[doc = "0x440 - Peripheral function 187 input selection register"]
#[inline(always)]
pub const fn func187_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(187)
}
#[doc = "0x444 - Peripheral function 188 input selection register"]
#[inline(always)]
pub const fn func188_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(188)
}
#[doc = "0x448 - Peripheral function 189 input selection register"]
#[inline(always)]
pub const fn func189_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(189)
}
#[doc = "0x44c - Peripheral function 190 input selection register"]
#[inline(always)]
pub const fn func190_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(190)
}
#[doc = "0x450 - Peripheral function 191 input selection register"]
#[inline(always)]
pub const fn func191_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(191)
}
#[doc = "0x454 - Peripheral function 192 input selection register"]
#[inline(always)]
pub const fn func192_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(192)
}
#[doc = "0x458 - Peripheral function 193 input selection register"]
#[inline(always)]
pub const fn func193_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(193)
}
#[doc = "0x45c - Peripheral function 194 input selection register"]
#[inline(always)]
pub const fn func194_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(194)
}
#[doc = "0x460 - Peripheral function 195 input selection register"]
#[inline(always)]
pub const fn func195_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(195)
}
#[doc = "0x464 - Peripheral function 196 input selection register"]
#[inline(always)]
pub const fn func196_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(196)
}
#[doc = "0x468 - Peripheral function 197 input selection register"]
#[inline(always)]
pub const fn func197_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(197)
}
#[doc = "0x46c - Peripheral function 198 input selection register"]
#[inline(always)]
pub const fn func198_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(198)
}
#[doc = "0x470 - Peripheral function 199 input selection register"]
#[inline(always)]
pub const fn func199_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(199)
}
#[doc = "0x474 - Peripheral function 200 input selection register"]
#[inline(always)]
pub const fn func200_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(200)
}
#[doc = "0x478 - Peripheral function 201 input selection register"]
#[inline(always)]
pub const fn func201_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(201)
}
#[doc = "0x47c - Peripheral function 202 input selection register"]
#[inline(always)]
pub const fn func202_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(202)
}
#[doc = "0x480 - Peripheral function 203 input selection register"]
#[inline(always)]
pub const fn func203_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(203)
}
#[doc = "0x484 - Peripheral function 204 input selection register"]
#[inline(always)]
pub const fn func204_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(204)
}
#[doc = "0x488 - Peripheral function 205 input selection register"]
#[inline(always)]
pub const fn func205_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(205)
}
#[doc = "0x48c - Peripheral function 206 input selection register"]
#[inline(always)]
pub const fn func206_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(206)
}
#[doc = "0x490 - Peripheral function 207 input selection register"]
#[inline(always)]
pub const fn func207_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(207)
}
#[doc = "0x494 - Peripheral function 208 input selection register"]
#[inline(always)]
pub const fn func208_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(208)
}
#[doc = "0x498 - Peripheral function 209 input selection register"]
#[inline(always)]
pub const fn func209_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(209)
}
#[doc = "0x49c - Peripheral function 210 input selection register"]
#[inline(always)]
pub const fn func210_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(210)
}
#[doc = "0x4a0 - Peripheral function 211 input selection register"]
#[inline(always)]
pub const fn func211_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(211)
}
#[doc = "0x4a4 - Peripheral function 212 input selection register"]
#[inline(always)]
pub const fn func212_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(212)
}
#[doc = "0x4a8 - Peripheral function 213 input selection register"]
#[inline(always)]
pub const fn func213_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(213)
}
#[doc = "0x4ac - Peripheral function 214 input selection register"]
#[inline(always)]
pub const fn func214_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(214)
}
#[doc = "0x4b0 - Peripheral function 215 input selection register"]
#[inline(always)]
pub const fn func215_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(215)
}
#[doc = "0x4b4 - Peripheral function 216 input selection register"]
#[inline(always)]
pub const fn func216_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(216)
}
#[doc = "0x4b8 - Peripheral function 217 input selection register"]
#[inline(always)]
pub const fn func217_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(217)
}
#[doc = "0x4bc - Peripheral function 218 input selection register"]
#[inline(always)]
pub const fn func218_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(218)
}
#[doc = "0x4c0 - Peripheral function 219 input selection register"]
#[inline(always)]
pub const fn func219_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(219)
}
#[doc = "0x4c4 - Peripheral function 220 input selection register"]
#[inline(always)]
pub const fn func220_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(220)
}
#[doc = "0x4c8 - Peripheral function 221 input selection register"]
#[inline(always)]
pub const fn func221_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(221)
}
#[doc = "0x4cc - Peripheral function 222 input selection register"]
#[inline(always)]
pub const fn func222_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(222)
}
#[doc = "0x4d0 - Peripheral function 223 input selection register"]
#[inline(always)]
pub const fn func223_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(223)
}
#[doc = "0x4d4 - Peripheral function 224 input selection register"]
#[inline(always)]
pub const fn func224_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(224)
}
#[doc = "0x4d8 - Peripheral function 225 input selection register"]
#[inline(always)]
pub const fn func225_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(225)
}
#[doc = "0x4dc - Peripheral function 226 input selection register"]
#[inline(always)]
pub const fn func226_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(226)
}
#[doc = "0x4e0 - Peripheral function 227 input selection register"]
#[inline(always)]
pub const fn func227_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(227)
}
#[doc = "0x4e4 - Peripheral function 228 input selection register"]
#[inline(always)]
pub const fn func228_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(228)
}
#[doc = "0x4e8 - Peripheral function 229 input selection register"]
#[inline(always)]
pub const fn func229_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(229)
}
#[doc = "0x4ec - Peripheral function 230 input selection register"]
#[inline(always)]
pub const fn func230_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(230)
}
#[doc = "0x4f0 - Peripheral function 231 input selection register"]
#[inline(always)]
pub const fn func231_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(231)
}
#[doc = "0x4f4 - Peripheral function 232 input selection register"]
#[inline(always)]
pub const fn func232_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(232)
}
#[doc = "0x4f8 - Peripheral function 233 input selection register"]
#[inline(always)]
pub const fn func233_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(233)
}
#[doc = "0x4fc - Peripheral function 234 input selection register"]
#[inline(always)]
pub const fn func234_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(234)
}
#[doc = "0x500 - Peripheral function 235 input selection register"]
#[inline(always)]
pub const fn func235_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(235)
}
#[doc = "0x504 - Peripheral function 236 input selection register"]
#[inline(always)]
pub const fn func236_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(236)
}
#[doc = "0x508 - Peripheral function 237 input selection register"]
#[inline(always)]
pub const fn func237_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(237)
}
#[doc = "0x50c - Peripheral function 238 input selection register"]
#[inline(always)]
pub const fn func238_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(238)
}
#[doc = "0x510 - Peripheral function 239 input selection register"]
#[inline(always)]
pub const fn func239_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(239)
}
#[doc = "0x514 - Peripheral function 240 input selection register"]
#[inline(always)]
pub const fn func240_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(240)
}
#[doc = "0x518 - Peripheral function 241 input selection register"]
#[inline(always)]
pub const fn func241_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(241)
}
#[doc = "0x51c - Peripheral function 242 input selection register"]
#[inline(always)]
pub const fn func242_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(242)
}
#[doc = "0x520 - Peripheral function 243 input selection register"]
#[inline(always)]
pub const fn func243_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(243)
}
#[doc = "0x524 - Peripheral function 244 input selection register"]
#[inline(always)]
pub const fn func244_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(244)
}
#[doc = "0x528 - Peripheral function 245 input selection register"]
#[inline(always)]
pub const fn func245_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(245)
}
#[doc = "0x52c - Peripheral function 246 input selection register"]
#[inline(always)]
pub const fn func246_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(246)
}
#[doc = "0x530 - Peripheral function 247 input selection register"]
#[inline(always)]
pub const fn func247_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(247)
}
#[doc = "0x534 - Peripheral function 248 input selection register"]
#[inline(always)]
pub const fn func248_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(248)
}
#[doc = "0x538 - Peripheral function 249 input selection register"]
#[inline(always)]
pub const fn func249_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(249)
}
#[doc = "0x53c - Peripheral function 250 input selection register"]
#[inline(always)]
pub const fn func250_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(250)
}
#[doc = "0x540 - Peripheral function 251 input selection register"]
#[inline(always)]
pub const fn func251_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(251)
}
#[doc = "0x544 - Peripheral function 252 input selection register"]
#[inline(always)]
pub const fn func252_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(252)
}
#[doc = "0x548 - Peripheral function 253 input selection register"]
#[inline(always)]
pub const fn func253_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(253)
}
#[doc = "0x54c - Peripheral function 254 input selection register"]
#[inline(always)]
pub const fn func254_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(254)
}
#[doc = "0x550 - Peripheral function 255 input selection register"]
#[inline(always)]
pub const fn func255_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(255)
}
#[doc = "0x554..0x62c - Peripheral output selection for GPIO %s"]
#[inline(always)]
pub const fn func_out_sel_cfg(&self, n: usize) -> &FUNC_OUT_SEL_CFG {
&self.func_out_sel_cfg[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x554..0x62c - Peripheral output selection for GPIO %s"]
#[inline(always)]
pub fn func_out_sel_cfg_iter(&self) -> impl Iterator<Item = &FUNC_OUT_SEL_CFG> {
self.func_out_sel_cfg.iter()
}
#[doc = "0x554 - Peripheral output selection for GPIO 0"]
#[inline(always)]
pub const fn func0_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(0)
}
#[doc = "0x558 - Peripheral output selection for GPIO 1"]
#[inline(always)]
pub const fn func1_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(1)
}
#[doc = "0x55c - Peripheral output selection for GPIO 2"]
#[inline(always)]
pub const fn func2_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(2)
}
#[doc = "0x560 - Peripheral output selection for GPIO 3"]
#[inline(always)]
pub const fn func3_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(3)
}
#[doc = "0x564 - Peripheral output selection for GPIO 4"]
#[inline(always)]
pub const fn func4_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(4)
}
#[doc = "0x568 - Peripheral output selection for GPIO 5"]
#[inline(always)]
pub const fn func5_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(5)
}
#[doc = "0x56c - Peripheral output selection for GPIO 6"]
#[inline(always)]
pub const fn func6_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(6)
}
#[doc = "0x570 - Peripheral output selection for GPIO 7"]
#[inline(always)]
pub const fn func7_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(7)
}
#[doc = "0x574 - Peripheral output selection for GPIO 8"]
#[inline(always)]
pub const fn func8_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(8)
}
#[doc = "0x578 - Peripheral output selection for GPIO 9"]
#[inline(always)]
pub const fn func9_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(9)
}
#[doc = "0x57c - Peripheral output selection for GPIO 10"]
#[inline(always)]
pub const fn func10_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(10)
}
#[doc = "0x580 - Peripheral output selection for GPIO 11"]
#[inline(always)]
pub const fn func11_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(11)
}
#[doc = "0x584 - Peripheral output selection for GPIO 12"]
#[inline(always)]
pub const fn func12_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(12)
}
#[doc = "0x588 - Peripheral output selection for GPIO 13"]
#[inline(always)]
pub const fn func13_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(13)
}
#[doc = "0x58c - Peripheral output selection for GPIO 14"]
#[inline(always)]
pub const fn func14_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(14)
}
#[doc = "0x590 - Peripheral output selection for GPIO 15"]
#[inline(always)]
pub const fn func15_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(15)
}
#[doc = "0x594 - Peripheral output selection for GPIO 16"]
#[inline(always)]
pub const fn func16_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(16)
}
#[doc = "0x598 - Peripheral output selection for GPIO 17"]
#[inline(always)]
pub const fn func17_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(17)
}
#[doc = "0x59c - Peripheral output selection for GPIO 18"]
#[inline(always)]
pub const fn func18_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(18)
}
#[doc = "0x5a0 - Peripheral output selection for GPIO 19"]
#[inline(always)]
pub const fn func19_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(19)
}
#[doc = "0x5a4 - Peripheral output selection for GPIO 20"]
#[inline(always)]
pub const fn func20_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(20)
}
#[doc = "0x5a8 - Peripheral output selection for GPIO 21"]
#[inline(always)]
pub const fn func21_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(21)
}
#[doc = "0x5ac - Peripheral output selection for GPIO 22"]
#[inline(always)]
pub const fn func22_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(22)
}
#[doc = "0x5b0 - Peripheral output selection for GPIO 23"]
#[inline(always)]
pub const fn func23_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(23)
}
#[doc = "0x5b4 - Peripheral output selection for GPIO 24"]
#[inline(always)]
pub const fn func24_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(24)
}
#[doc = "0x5b8 - Peripheral output selection for GPIO 25"]
#[inline(always)]
pub const fn func25_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(25)
}
#[doc = "0x5bc - Peripheral output selection for GPIO 26"]
#[inline(always)]
pub const fn func26_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(26)
}
#[doc = "0x5c0 - Peripheral output selection for GPIO 27"]
#[inline(always)]
pub const fn func27_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(27)
}
#[doc = "0x5c4 - Peripheral output selection for GPIO 28"]
#[inline(always)]
pub const fn func28_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(28)
}
#[doc = "0x5c8 - Peripheral output selection for GPIO 29"]
#[inline(always)]
pub const fn func29_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(29)
}
#[doc = "0x5cc - Peripheral output selection for GPIO 30"]
#[inline(always)]
pub const fn func30_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(30)
}
#[doc = "0x5d0 - Peripheral output selection for GPIO 31"]
#[inline(always)]
pub const fn func31_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(31)
}
#[doc = "0x5d4 - Peripheral output selection for GPIO 32"]
#[inline(always)]
pub const fn func32_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(32)
}
#[doc = "0x5d8 - Peripheral output selection for GPIO 33"]
#[inline(always)]
pub const fn func33_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(33)
}
#[doc = "0x5dc - Peripheral output selection for GPIO 34"]
#[inline(always)]
pub const fn func34_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(34)
}
#[doc = "0x5e0 - Peripheral output selection for GPIO 35"]
#[inline(always)]
pub const fn func35_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(35)
}
#[doc = "0x5e4 - Peripheral output selection for GPIO 36"]
#[inline(always)]
pub const fn func36_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(36)
}
#[doc = "0x5e8 - Peripheral output selection for GPIO 37"]
#[inline(always)]
pub const fn func37_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(37)
}
#[doc = "0x5ec - Peripheral output selection for GPIO 38"]
#[inline(always)]
pub const fn func38_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(38)
}
#[doc = "0x5f0 - Peripheral output selection for GPIO 39"]
#[inline(always)]
pub const fn func39_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(39)
}
#[doc = "0x5f4 - Peripheral output selection for GPIO 40"]
#[inline(always)]
pub const fn func40_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(40)
}
#[doc = "0x5f8 - Peripheral output selection for GPIO 41"]
#[inline(always)]
pub const fn func41_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(41)
}
#[doc = "0x5fc - Peripheral output selection for GPIO 42"]
#[inline(always)]
pub const fn func42_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(42)
}
#[doc = "0x600 - Peripheral output selection for GPIO 43"]
#[inline(always)]
pub const fn func43_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(43)
}
#[doc = "0x604 - Peripheral output selection for GPIO 44"]
#[inline(always)]
pub const fn func44_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(44)
}
#[doc = "0x608 - Peripheral output selection for GPIO 45"]
#[inline(always)]
pub const fn func45_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(45)
}
#[doc = "0x60c - Peripheral output selection for GPIO 46"]
#[inline(always)]
pub const fn func46_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(46)
}
#[doc = "0x610 - Peripheral output selection for GPIO 47"]
#[inline(always)]
pub const fn func47_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(47)
}
#[doc = "0x614 - Peripheral output selection for GPIO 48"]
#[inline(always)]
pub const fn func48_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(48)
}
#[doc = "0x618 - Peripheral output selection for GPIO 49"]
#[inline(always)]
pub const fn func49_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(49)
}
#[doc = "0x61c - Peripheral output selection for GPIO 50"]
#[inline(always)]
pub const fn func50_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(50)
}
#[doc = "0x620 - Peripheral output selection for GPIO 51"]
#[inline(always)]
pub const fn func51_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(51)
}
#[doc = "0x624 - Peripheral output selection for GPIO 52"]
#[inline(always)]
pub const fn func52_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(52)
}
#[doc = "0x628 - Peripheral output selection for GPIO 53"]
#[inline(always)]
pub const fn func53_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(53)
}
#[doc = "0x62c - GPIO clock gating register"]
#[inline(always)]
pub const fn clock_gate(&self) -> &CLOCK_GATE {
&self.clock_gate
}
#[doc = "0x6fc - Version control register"]
#[inline(always)]
pub const fn reg_date(&self) -> ®_DATE {
&self.reg_date
}
}
#[doc = "BT_SELECT (rw) register accessor: GPIO bit select register\n\nYou can [`read`](crate::Reg::read) this register and get [`bt_select::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bt_select::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bt_select`] module"]
pub type BT_SELECT = crate::Reg<bt_select::BT_SELECT_SPEC>;
#[doc = "GPIO bit select register"]
pub mod bt_select;
#[doc = "OUT (rw) register accessor: GPIO0 ~ 31 output register\n\nYou can [`read`](crate::Reg::read) this register and get [`out::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`out::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out`] module"]
pub type OUT = crate::Reg<out::OUT_SPEC>;
#[doc = "GPIO0 ~ 31 output register"]
pub mod out;
#[doc = "OUT_W1TS (w) register accessor: GPIO0 ~ 31 output bit set register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`out_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_w1ts`] module"]
pub type OUT_W1TS = crate::Reg<out_w1ts::OUT_W1TS_SPEC>;
#[doc = "GPIO0 ~ 31 output bit set register"]
pub mod out_w1ts;
#[doc = "OUT_W1TC (w) register accessor: GPIO0 ~ 31 output bit clear register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`out_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_w1tc`] module"]
pub type OUT_W1TC = crate::Reg<out_w1tc::OUT_W1TC_SPEC>;
#[doc = "GPIO0 ~ 31 output bit clear register"]
pub mod out_w1tc;
#[doc = "OUT1 (rw) register accessor: GPIO32 ~ 53 output register\n\nYou can [`read`](crate::Reg::read) this register and get [`out1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`out1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out1`] module"]
pub type OUT1 = crate::Reg<out1::OUT1_SPEC>;
#[doc = "GPIO32 ~ 53 output register"]
pub mod out1;
#[doc = "OUT1_W1TS (w) register accessor: GPIO32 ~ 53 output bit set register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`out1_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out1_w1ts`] module"]
pub type OUT1_W1TS = crate::Reg<out1_w1ts::OUT1_W1TS_SPEC>;
#[doc = "GPIO32 ~ 53 output bit set register"]
pub mod out1_w1ts;
#[doc = "OUT1_W1TC (w) register accessor: GPIO32 ~ 53 output bit clear register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`out1_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out1_w1tc`] module"]
pub type OUT1_W1TC = crate::Reg<out1_w1tc::OUT1_W1TC_SPEC>;
#[doc = "GPIO32 ~ 53 output bit clear register"]
pub mod out1_w1tc;
#[doc = "SDIO_SELECT (rw) register accessor: GPIO SDIO selection register\n\nYou can [`read`](crate::Reg::read) this register and get [`sdio_select::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sdio_select::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sdio_select`] module"]
pub type SDIO_SELECT = crate::Reg<sdio_select::SDIO_SELECT_SPEC>;
#[doc = "GPIO SDIO selection register"]
pub mod sdio_select;
#[doc = "ENABLE (rw) register accessor: GPIO0 ~ 31 output enable register\n\nYou can [`read`](crate::Reg::read) this register and get [`enable::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`enable::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable`] module"]
pub type ENABLE = crate::Reg<enable::ENABLE_SPEC>;
#[doc = "GPIO0 ~ 31 output enable register"]
pub mod enable;
#[doc = "ENABLE_W1TS (w) register accessor: GPIO0 ~ 31 output enable bit set register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`enable_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable_w1ts`] module"]
pub type ENABLE_W1TS = crate::Reg<enable_w1ts::ENABLE_W1TS_SPEC>;
#[doc = "GPIO0 ~ 31 output enable bit set register"]
pub mod enable_w1ts;
#[doc = "ENABLE_W1TC (w) register accessor: GPIO0 ~ 31 output enable bit clear register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`enable_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable_w1tc`] module"]
pub type ENABLE_W1TC = crate::Reg<enable_w1tc::ENABLE_W1TC_SPEC>;
#[doc = "GPIO0 ~ 31 output enable bit clear register"]
pub mod enable_w1tc;
#[doc = "ENABLE1 (rw) register accessor: GPIO32 ~ 53 output enable register\n\nYou can [`read`](crate::Reg::read) this register and get [`enable1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`enable1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable1`] module"]
pub type ENABLE1 = crate::Reg<enable1::ENABLE1_SPEC>;
#[doc = "GPIO32 ~ 53 output enable register"]
pub mod enable1;
#[doc = "ENABLE1_W1TS (w) register accessor: GPIO32 ~ 53 output enable bit set register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`enable1_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable1_w1ts`] module"]
pub type ENABLE1_W1TS = crate::Reg<enable1_w1ts::ENABLE1_W1TS_SPEC>;
#[doc = "GPIO32 ~ 53 output enable bit set register"]
pub mod enable1_w1ts;
#[doc = "ENABLE1_W1TC (w) register accessor: GPIO32 ~ 53 output enable bit clear register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`enable1_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable1_w1tc`] module"]
pub type ENABLE1_W1TC = crate::Reg<enable1_w1tc::ENABLE1_W1TC_SPEC>;
#[doc = "GPIO32 ~ 53 output enable bit clear register"]
pub mod enable1_w1tc;
#[doc = "STRAP (r) register accessor: Bootstrap pin value register\n\nYou can [`read`](crate::Reg::read) this register and get [`strap::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@strap`] module"]
pub type STRAP = crate::Reg<strap::STRAP_SPEC>;
#[doc = "Bootstrap pin value register"]
pub mod strap;
#[doc = "IN (rw) register accessor: GPIO0 ~ 31 input register\n\nYou can [`read`](crate::Reg::read) this register and get [`in_::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`in_::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@in_`] module"]
pub type IN = crate::Reg<in_::IN_SPEC>;
#[doc = "GPIO0 ~ 31 input register"]
pub mod in_;
#[doc = "IN1 (r) register accessor: GPIO32 ~ 53 input register\n\nYou can [`read`](crate::Reg::read) this register and get [`in1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@in1`] module"]
pub type IN1 = crate::Reg<in1::IN1_SPEC>;
#[doc = "GPIO32 ~ 53 input register"]
pub mod in1;
#[doc = "STATUS (rw) register accessor: GPIO0 ~ 31 interrupt status register\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`] module"]
pub type STATUS = crate::Reg<status::STATUS_SPEC>;
#[doc = "GPIO0 ~ 31 interrupt status register"]
pub mod status;
#[doc = "STATUS_W1TS (w) register accessor: GPIO0 ~ 31 interrupt status bit set register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status_w1ts`] module"]
pub type STATUS_W1TS = crate::Reg<status_w1ts::STATUS_W1TS_SPEC>;
#[doc = "GPIO0 ~ 31 interrupt status bit set register"]
pub mod status_w1ts;
#[doc = "STATUS_W1TC (w) register accessor: GPIO0 ~ 31 interrupt status bit clear register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status_w1tc`] module"]
pub type STATUS_W1TC = crate::Reg<status_w1tc::STATUS_W1TC_SPEC>;
#[doc = "GPIO0 ~ 31 interrupt status bit clear register"]
pub mod status_w1tc;
#[doc = "STATUS1 (rw) register accessor: GPIO32 ~ 53 interrupt status register\n\nYou can [`read`](crate::Reg::read) this register and get [`status1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status1`] module"]
pub type STATUS1 = crate::Reg<status1::STATUS1_SPEC>;
#[doc = "GPIO32 ~ 53 interrupt status register"]
pub mod status1;
#[doc = "STATUS1_W1TS (w) register accessor: GPIO32 ~ 53 interrupt status bit set register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status1_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status1_w1ts`] module"]
pub type STATUS1_W1TS = crate::Reg<status1_w1ts::STATUS1_W1TS_SPEC>;
#[doc = "GPIO32 ~ 53 interrupt status bit set register"]
pub mod status1_w1ts;
#[doc = "STATUS1_W1TC (w) register accessor: GPIO32 ~ 53 interrupt status bit clear register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status1_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status1_w1tc`] module"]
pub type STATUS1_W1TC = crate::Reg<status1_w1tc::STATUS1_W1TC_SPEC>;
#[doc = "GPIO32 ~ 53 interrupt status bit clear register"]
pub mod status1_w1tc;
#[doc = "PCPU_INT (r) register accessor: GPIO0 ~ 31 PRO_CPU interrupt status register\n\nYou can [`read`](crate::Reg::read) this register and get [`pcpu_int::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pcpu_int`] module"]
pub type PCPU_INT = crate::Reg<pcpu_int::PCPU_INT_SPEC>;
#[doc = "GPIO0 ~ 31 PRO_CPU interrupt status register"]
pub mod pcpu_int;
#[doc = "PCPU_NMI_INT (r) register accessor: GPIO0 ~ 31 PRO_CPU non-maskable interrupt status register\n\nYou can [`read`](crate::Reg::read) this register and get [`pcpu_nmi_int::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pcpu_nmi_int`] module"]
pub type PCPU_NMI_INT = crate::Reg<pcpu_nmi_int::PCPU_NMI_INT_SPEC>;
#[doc = "GPIO0 ~ 31 PRO_CPU non-maskable interrupt status register"]
pub mod pcpu_nmi_int;
#[doc = "CPUSDIO_INT (r) register accessor: GPIO0 ~ 31 CPU SDIO interrupt status register\n\nYou can [`read`](crate::Reg::read) this register and get [`cpusdio_int::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cpusdio_int`] module"]
pub type CPUSDIO_INT = crate::Reg<cpusdio_int::CPUSDIO_INT_SPEC>;
#[doc = "GPIO0 ~ 31 CPU SDIO interrupt status register"]
pub mod cpusdio_int;
#[doc = "PCPU_INT1 (r) register accessor: GPIO32 ~ 53 PRO_CPU interrupt status register\n\nYou can [`read`](crate::Reg::read) this register and get [`pcpu_int1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pcpu_int1`] module"]
pub type PCPU_INT1 = crate::Reg<pcpu_int1::PCPU_INT1_SPEC>;
#[doc = "GPIO32 ~ 53 PRO_CPU interrupt status register"]
pub mod pcpu_int1;
#[doc = "PCPU_NMI_INT1 (r) register accessor: GPIO32 ~ 53 PRO_CPU non-maskable interrupt status register\n\nYou can [`read`](crate::Reg::read) this register and get [`pcpu_nmi_int1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pcpu_nmi_int1`] module"]
pub type PCPU_NMI_INT1 = crate::Reg<pcpu_nmi_int1::PCPU_NMI_INT1_SPEC>;
#[doc = "GPIO32 ~ 53 PRO_CPU non-maskable interrupt status register"]
pub mod pcpu_nmi_int1;
#[doc = "CPUSDIO_INT1 (r) register accessor: GPIO32 ~ 53 CPU SDIO interrupt status register\n\nYou can [`read`](crate::Reg::read) this register and get [`cpusdio_int1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cpusdio_int1`] module"]
pub type CPUSDIO_INT1 = crate::Reg<cpusdio_int1::CPUSDIO_INT1_SPEC>;
#[doc = "GPIO32 ~ 53 CPU SDIO interrupt status register"]
pub mod cpusdio_int1;
#[doc = "PIN (rw) register accessor: Configuration for GPIO pin %s\n\nYou can [`read`](crate::Reg::read) this register and get [`pin::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`pin::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pin`] module"]
pub type PIN = crate::Reg<pin::PIN_SPEC>;
#[doc = "Configuration for GPIO pin %s"]
pub mod pin;
#[doc = "STATUS_NEXT (r) register accessor: GPIO0 ~ 31 interrupt source register\n\nYou can [`read`](crate::Reg::read) this register and get [`status_next::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status_next`] module"]
pub type STATUS_NEXT = crate::Reg<status_next::STATUS_NEXT_SPEC>;
#[doc = "GPIO0 ~ 31 interrupt source register"]
pub mod status_next;
#[doc = "STATUS_NEXT1 (r) register accessor: GPIO32 ~ 53 interrupt source register\n\nYou can [`read`](crate::Reg::read) this register and get [`status_next1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status_next1`] module"]
pub type STATUS_NEXT1 = crate::Reg<status_next1::STATUS_NEXT1_SPEC>;
#[doc = "GPIO32 ~ 53 interrupt source register"]
pub mod status_next1;
#[doc = "FUNC_IN_SEL_CFG (rw) register accessor: Peripheral function %s input selection register\n\nYou can [`read`](crate::Reg::read) this register and get [`func_in_sel_cfg::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`func_in_sel_cfg::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@func_in_sel_cfg`] module"]
pub type FUNC_IN_SEL_CFG = crate::Reg<func_in_sel_cfg::FUNC_IN_SEL_CFG_SPEC>;
#[doc = "Peripheral function %s input selection register"]
pub mod func_in_sel_cfg;
#[doc = "FUNC_OUT_SEL_CFG (rw) register accessor: Peripheral output selection for GPIO %s\n\nYou can [`read`](crate::Reg::read) this register and get [`func_out_sel_cfg::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`func_out_sel_cfg::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@func_out_sel_cfg`] module"]
pub type FUNC_OUT_SEL_CFG = crate::Reg<func_out_sel_cfg::FUNC_OUT_SEL_CFG_SPEC>;
#[doc = "Peripheral output selection for GPIO %s"]
pub mod func_out_sel_cfg;
#[doc = "CLOCK_GATE (rw) register accessor: GPIO clock gating register\n\nYou can [`read`](crate::Reg::read) this register and get [`clock_gate::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`clock_gate::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@clock_gate`] module"]
pub type CLOCK_GATE = crate::Reg<clock_gate::CLOCK_GATE_SPEC>;
#[doc = "GPIO clock gating register"]
pub mod clock_gate;
#[doc = "REG_DATE (rw) register accessor: Version control register\n\nYou can [`read`](crate::Reg::read) this register and get [`reg_date::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`reg_date::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@reg_date`] module"]
pub type REG_DATE = crate::Reg<reg_date::REG_DATE_SPEC>;
#[doc = "Version control register"]
pub mod reg_date;