#[doc = "Register `INT_RAW` reader"]
pub struct R(crate::R<INT_RAW_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<INT_RAW_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<INT_RAW_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<INT_RAW_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Field `RXFIFO_FULL_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver receives more data than what UART_RXFIFO_FULL_THRHD specifies."]
pub struct RXFIFO_FULL_INT_RAW_R(crate::FieldReader<bool, bool>);
impl RXFIFO_FULL_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        RXFIFO_FULL_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for RXFIFO_FULL_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `TXFIFO_EMPTY_INT_RAW` reader - This interrupt raw bit turns to high level when the amount of data in TX FIFO is less than what UART_TXFIFO_EMPTY_THRHD specifies."]
pub struct TXFIFO_EMPTY_INT_RAW_R(crate::FieldReader<bool, bool>);
impl TXFIFO_EMPTY_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        TXFIFO_EMPTY_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for TXFIFO_EMPTY_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `PARITY_ERR_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver detects a parity error in the data."]
pub struct PARITY_ERR_INT_RAW_R(crate::FieldReader<bool, bool>);
impl PARITY_ERR_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        PARITY_ERR_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for PARITY_ERR_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `FRM_ERR_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver detects a data frame error."]
pub struct FRM_ERR_INT_RAW_R(crate::FieldReader<bool, bool>);
impl FRM_ERR_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        FRM_ERR_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for FRM_ERR_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `RXFIFO_OVF_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver receives more data than the capacity of RX FIFO."]
pub struct RXFIFO_OVF_INT_RAW_R(crate::FieldReader<bool, bool>);
impl RXFIFO_OVF_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        RXFIFO_OVF_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for RXFIFO_OVF_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `DSR_CHG_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver detects the edge change of DSRn signal."]
pub struct DSR_CHG_INT_RAW_R(crate::FieldReader<bool, bool>);
impl DSR_CHG_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        DSR_CHG_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for DSR_CHG_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `CTS_CHG_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver detects the edge change of CTSn signal."]
pub struct CTS_CHG_INT_RAW_R(crate::FieldReader<bool, bool>);
impl CTS_CHG_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        CTS_CHG_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for CTS_CHG_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `BRK_DET_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver detects a 0 after the stop bit."]
pub struct BRK_DET_INT_RAW_R(crate::FieldReader<bool, bool>);
impl BRK_DET_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        BRK_DET_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for BRK_DET_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `RXFIFO_TOUT_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver takes more time than UART_RX_TOUT_THRHD to receive a byte."]
pub struct RXFIFO_TOUT_INT_RAW_R(crate::FieldReader<bool, bool>);
impl RXFIFO_TOUT_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        RXFIFO_TOUT_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for RXFIFO_TOUT_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `SW_XON_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver receives an XON character and UART_SW_FLOW_CON_EN is set to 1."]
pub struct SW_XON_INT_RAW_R(crate::FieldReader<bool, bool>);
impl SW_XON_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        SW_XON_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for SW_XON_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `SW_XOFF_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver receives an XOFF character and UART_SW_FLOW_CON_EN is set to 1."]
pub struct SW_XOFF_INT_RAW_R(crate::FieldReader<bool, bool>);
impl SW_XOFF_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        SW_XOFF_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for SW_XOFF_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `GLITCH_DET_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver detects a glitch in the middle of a start bit."]
pub struct GLITCH_DET_INT_RAW_R(crate::FieldReader<bool, bool>);
impl GLITCH_DET_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        GLITCH_DET_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for GLITCH_DET_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `TX_BRK_DONE_INT_RAW` reader - This interrupt raw bit turns to high level when the transmitter completes sending NULL characters, after all data in TX FIFO are sent."]
pub struct TX_BRK_DONE_INT_RAW_R(crate::FieldReader<bool, bool>);
impl TX_BRK_DONE_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        TX_BRK_DONE_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for TX_BRK_DONE_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `TX_BRK_IDLE_DONE_INT_RAW` reader - This interrupt raw bit turns to high level when the transmitter has kept the shortest duration after sending the last data."]
pub struct TX_BRK_IDLE_DONE_INT_RAW_R(crate::FieldReader<bool, bool>);
impl TX_BRK_IDLE_DONE_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        TX_BRK_IDLE_DONE_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for TX_BRK_IDLE_DONE_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `TX_DONE_INT_RAW` reader - This interrupt raw bit turns to high level when the transmitter has sent out all data in FIFO."]
pub struct TX_DONE_INT_RAW_R(crate::FieldReader<bool, bool>);
impl TX_DONE_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        TX_DONE_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for TX_DONE_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `RS485_PARITY_ERR_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver detects a parity error from the echo of the transmitter in RS485 mode."]
pub struct RS485_PARITY_ERR_INT_RAW_R(crate::FieldReader<bool, bool>);
impl RS485_PARITY_ERR_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        RS485_PARITY_ERR_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for RS485_PARITY_ERR_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `RS485_FRM_ERR_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver detects a data frame error from the echo of the transmitter in RS485 mode."]
pub struct RS485_FRM_ERR_INT_RAW_R(crate::FieldReader<bool, bool>);
impl RS485_FRM_ERR_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        RS485_FRM_ERR_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for RS485_FRM_ERR_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `RS485_CLASH_INT_RAW` reader - This interrupt raw bit turns to high level when a collision is detected between the transmitter and the receiver in RS485 mode."]
pub struct RS485_CLASH_INT_RAW_R(crate::FieldReader<bool, bool>);
impl RS485_CLASH_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        RS485_CLASH_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for RS485_CLASH_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `AT_CMD_CHAR_DET_INT_RAW` reader - This interrupt raw bit turns to high level when the receiver detects the configured UART_AT_CMD CHAR."]
pub struct AT_CMD_CHAR_DET_INT_RAW_R(crate::FieldReader<bool, bool>);
impl AT_CMD_CHAR_DET_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        AT_CMD_CHAR_DET_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for AT_CMD_CHAR_DET_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `WAKEUP_INT_RAW` reader - This interrupt raw bit turns to high level when input RXD edge changes more times than what UART_ACTIVE_THRESHOLD specifies in Light-sleep mode."]
pub struct WAKEUP_INT_RAW_R(crate::FieldReader<bool, bool>);
impl WAKEUP_INT_RAW_R {
    #[inline(always)]
    pub(crate) fn new(bits: bool) -> Self {
        WAKEUP_INT_RAW_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for WAKEUP_INT_RAW_R {
    type Target = crate::FieldReader<bool, bool>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl R {
    #[doc = "Bit 0 - This interrupt raw bit turns to high level when the receiver receives more data than what UART_RXFIFO_FULL_THRHD specifies."]
    #[inline(always)]
    pub fn rxfifo_full_int_raw(&self) -> RXFIFO_FULL_INT_RAW_R {
        RXFIFO_FULL_INT_RAW_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - This interrupt raw bit turns to high level when the amount of data in TX FIFO is less than what UART_TXFIFO_EMPTY_THRHD specifies."]
    #[inline(always)]
    pub fn txfifo_empty_int_raw(&self) -> TXFIFO_EMPTY_INT_RAW_R {
        TXFIFO_EMPTY_INT_RAW_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - This interrupt raw bit turns to high level when the receiver detects a parity error in the data."]
    #[inline(always)]
    pub fn parity_err_int_raw(&self) -> PARITY_ERR_INT_RAW_R {
        PARITY_ERR_INT_RAW_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - This interrupt raw bit turns to high level when the receiver detects a data frame error."]
    #[inline(always)]
    pub fn frm_err_int_raw(&self) -> FRM_ERR_INT_RAW_R {
        FRM_ERR_INT_RAW_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4 - This interrupt raw bit turns to high level when the receiver receives more data than the capacity of RX FIFO."]
    #[inline(always)]
    pub fn rxfifo_ovf_int_raw(&self) -> RXFIFO_OVF_INT_RAW_R {
        RXFIFO_OVF_INT_RAW_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5 - This interrupt raw bit turns to high level when the receiver detects the edge change of DSRn signal."]
    #[inline(always)]
    pub fn dsr_chg_int_raw(&self) -> DSR_CHG_INT_RAW_R {
        DSR_CHG_INT_RAW_R::new(((self.bits >> 5) & 1) != 0)
    }
    #[doc = "Bit 6 - This interrupt raw bit turns to high level when the receiver detects the edge change of CTSn signal."]
    #[inline(always)]
    pub fn cts_chg_int_raw(&self) -> CTS_CHG_INT_RAW_R {
        CTS_CHG_INT_RAW_R::new(((self.bits >> 6) & 1) != 0)
    }
    #[doc = "Bit 7 - This interrupt raw bit turns to high level when the receiver detects a 0 after the stop bit."]
    #[inline(always)]
    pub fn brk_det_int_raw(&self) -> BRK_DET_INT_RAW_R {
        BRK_DET_INT_RAW_R::new(((self.bits >> 7) & 1) != 0)
    }
    #[doc = "Bit 8 - This interrupt raw bit turns to high level when the receiver takes more time than UART_RX_TOUT_THRHD to receive a byte."]
    #[inline(always)]
    pub fn rxfifo_tout_int_raw(&self) -> RXFIFO_TOUT_INT_RAW_R {
        RXFIFO_TOUT_INT_RAW_R::new(((self.bits >> 8) & 1) != 0)
    }
    #[doc = "Bit 9 - This interrupt raw bit turns to high level when the receiver receives an XON character and UART_SW_FLOW_CON_EN is set to 1."]
    #[inline(always)]
    pub fn sw_xon_int_raw(&self) -> SW_XON_INT_RAW_R {
        SW_XON_INT_RAW_R::new(((self.bits >> 9) & 1) != 0)
    }
    #[doc = "Bit 10 - This interrupt raw bit turns to high level when the receiver receives an XOFF character and UART_SW_FLOW_CON_EN is set to 1."]
    #[inline(always)]
    pub fn sw_xoff_int_raw(&self) -> SW_XOFF_INT_RAW_R {
        SW_XOFF_INT_RAW_R::new(((self.bits >> 10) & 1) != 0)
    }
    #[doc = "Bit 11 - This interrupt raw bit turns to high level when the receiver detects a glitch in the middle of a start bit."]
    #[inline(always)]
    pub fn glitch_det_int_raw(&self) -> GLITCH_DET_INT_RAW_R {
        GLITCH_DET_INT_RAW_R::new(((self.bits >> 11) & 1) != 0)
    }
    #[doc = "Bit 12 - This interrupt raw bit turns to high level when the transmitter completes sending NULL characters, after all data in TX FIFO are sent."]
    #[inline(always)]
    pub fn tx_brk_done_int_raw(&self) -> TX_BRK_DONE_INT_RAW_R {
        TX_BRK_DONE_INT_RAW_R::new(((self.bits >> 12) & 1) != 0)
    }
    #[doc = "Bit 13 - This interrupt raw bit turns to high level when the transmitter has kept the shortest duration after sending the last data."]
    #[inline(always)]
    pub fn tx_brk_idle_done_int_raw(&self) -> TX_BRK_IDLE_DONE_INT_RAW_R {
        TX_BRK_IDLE_DONE_INT_RAW_R::new(((self.bits >> 13) & 1) != 0)
    }
    #[doc = "Bit 14 - This interrupt raw bit turns to high level when the transmitter has sent out all data in FIFO."]
    #[inline(always)]
    pub fn tx_done_int_raw(&self) -> TX_DONE_INT_RAW_R {
        TX_DONE_INT_RAW_R::new(((self.bits >> 14) & 1) != 0)
    }
    #[doc = "Bit 15 - This interrupt raw bit turns to high level when the receiver detects a parity error from the echo of the transmitter in RS485 mode."]
    #[inline(always)]
    pub fn rs485_parity_err_int_raw(&self) -> RS485_PARITY_ERR_INT_RAW_R {
        RS485_PARITY_ERR_INT_RAW_R::new(((self.bits >> 15) & 1) != 0)
    }
    #[doc = "Bit 16 - This interrupt raw bit turns to high level when the receiver detects a data frame error from the echo of the transmitter in RS485 mode."]
    #[inline(always)]
    pub fn rs485_frm_err_int_raw(&self) -> RS485_FRM_ERR_INT_RAW_R {
        RS485_FRM_ERR_INT_RAW_R::new(((self.bits >> 16) & 1) != 0)
    }
    #[doc = "Bit 17 - This interrupt raw bit turns to high level when a collision is detected between the transmitter and the receiver in RS485 mode."]
    #[inline(always)]
    pub fn rs485_clash_int_raw(&self) -> RS485_CLASH_INT_RAW_R {
        RS485_CLASH_INT_RAW_R::new(((self.bits >> 17) & 1) != 0)
    }
    #[doc = "Bit 18 - This interrupt raw bit turns to high level when the receiver detects the configured UART_AT_CMD CHAR."]
    #[inline(always)]
    pub fn at_cmd_char_det_int_raw(&self) -> AT_CMD_CHAR_DET_INT_RAW_R {
        AT_CMD_CHAR_DET_INT_RAW_R::new(((self.bits >> 18) & 1) != 0)
    }
    #[doc = "Bit 19 - This interrupt raw bit turns to high level when input RXD edge changes more times than what UART_ACTIVE_THRESHOLD specifies in Light-sleep mode."]
    #[inline(always)]
    pub fn wakeup_int_raw(&self) -> WAKEUP_INT_RAW_R {
        WAKEUP_INT_RAW_R::new(((self.bits >> 19) & 1) != 0)
    }
}
#[doc = "Raw interrupt status\n\nThis register you can [`read`]
(crate::generic::Reg::read). See [API]
(https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [int_raw]
(index.html) module"]
pub struct INT_RAW_SPEC;
impl crate::RegisterSpec for INT_RAW_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [int_raw::R]
(R) reader structure"]
impl crate::Readable for INT_RAW_SPEC {
    type Reader = R;
}
#[doc = "`reset()` method sets INT_RAW to value 0"]
impl crate::Resettable for INT_RAW_SPEC {
    #[inline(always)]
    fn reset_value() -> Self::Ux {
        0
    }
}