Module esp32s2::uart0

UART (Universal Asynchronous Receiver-Transmitter) Controller 0

Modules

• at_cmd_char
  AT escape sequence selection configuration
• at_cmd_gaptout
  Timeout configuration
• at_cmd_postcnt
  Post-sequence timing configuration
• at_cmd_precnt
  Pre-sequence timing configuration
• autobaud
  Autobaud configuration register
• clkdiv
  Clock divider configuration
• conf0
  Configuration register 0
• conf1
  Configuration register 1
• date
  UART version control register
• fifo
  FIFO data register
• flow_conf
  Software flow control configuration
• fsm_status
  UART transmitter and receiver status
• highpulse
  Autobaud minimum high pulse duration register
• id
  UART ID register
• idle_conf
  Frame end idle time configuration
• int_clr
  Interrupt clear bits
• int_ena
  Interrupt enable bits
• int_raw
  Raw interrupt status
• int_st
  Masked interrupt status
• lowpulse
  Autobaud minimum low pulse duration register
• mem_conf
  UART threshold and allocation configuration
• mem_rx_status
  RX FIFO write and read offset address
• mem_tx_status
  TX FIFO write and read offset address
• negpulse
  Autobaud low pulse register
• pospulse
  Autobaud high pulse register
• rs485_conf
  RS485 mode configuration
• rxd_cnt
  Autobaud edge change count register
• sleep_conf
  Sleep mode configuration
• status
  UART status register
• swfc_conf0
  Software flow control character configuration
• swfc_conf1
  Software flow-control character configuration

Structs

• RegisterBlock
  Register block

Type Definitions

• AT_CMD_CHAR
  AT_CMD_CHAR (rw) register accessor: an alias for Reg<AT_CMD_CHAR_SPEC>
• AT_CMD_GAPTOUT
  AT_CMD_GAPTOUT (rw) register accessor: an alias for Reg<AT_CMD_GAPTOUT_SPEC>
• AT_CMD_POSTCNT
  AT_CMD_POSTCNT (rw) register accessor: an alias for Reg<AT_CMD_POSTCNT_SPEC>
• AT_CMD_PRECNT
  AT_CMD_PRECNT (rw) register accessor: an alias for Reg<AT_CMD_PRECNT_SPEC>
• AUTOBAUD
  AUTOBAUD (rw) register accessor: an alias for Reg<AUTOBAUD_SPEC>
• CLKDIV
  CLKDIV (rw) register accessor: an alias for Reg<CLKDIV_SPEC>
• CONF0
  CONF0 (rw) register accessor: an alias for Reg<CONF0_SPEC>
• CONF1
  CONF1 (rw) register accessor: an alias for Reg<CONF1_SPEC>
• DATE
  DATE (rw) register accessor: an alias for Reg<DATE_SPEC>
• FIFO
  FIFO (rw) register accessor: an alias for Reg<FIFO_SPEC>
• FLOW_CONF
  FLOW_CONF (rw) register accessor: an alias for Reg<FLOW_CONF_SPEC>
• FSM_STATUS
  FSM_STATUS (r) register accessor: an alias for Reg<FSM_STATUS_SPEC>
• HIGHPULSE
  HIGHPULSE (r) register accessor: an alias for Reg<HIGHPULSE_SPEC>
• ID
  ID (rw) register accessor: an alias for Reg<ID_SPEC>
• IDLE_CONF
  IDLE_CONF (rw) register accessor: an alias for Reg<IDLE_CONF_SPEC>
• INT_CLR
  INT_CLR (w) register accessor: an alias for Reg<INT_CLR_SPEC>
• INT_ENA
  INT_ENA (rw) register accessor: an alias for Reg<INT_ENA_SPEC>
• INT_RAW
  INT_RAW (r) register accessor: an alias for Reg<INT_RAW_SPEC>
• INT_ST
  INT_ST (r) register accessor: an alias for Reg<INT_ST_SPEC>
• LOWPULSE
  LOWPULSE (r) register accessor: an alias for Reg<LOWPULSE_SPEC>
• MEM_CONF
  MEM_CONF (rw) register accessor: an alias for Reg<MEM_CONF_SPEC>
• MEM_RX_STATUS
  MEM_RX_STATUS (r) register accessor: an alias for Reg<MEM_RX_STATUS_SPEC>
• MEM_TX_STATUS
  MEM_TX_STATUS (r) register accessor: an alias for Reg<MEM_TX_STATUS_SPEC>
• NEGPULSE
  NEGPULSE (r) register accessor: an alias for Reg<NEGPULSE_SPEC>
• POSPULSE
  POSPULSE (r) register accessor: an alias for Reg<POSPULSE_SPEC>
• RS485_CONF
  RS485_CONF (rw) register accessor: an alias for Reg<RS485_CONF_SPEC>
• RXD_CNT
  RXD_CNT (r) register accessor: an alias for Reg<RXD_CNT_SPEC>
• SLEEP_CONF
  SLEEP_CONF (rw) register accessor: an alias for Reg<SLEEP_CONF_SPEC>
• STATUS
  STATUS (r) register accessor: an alias for Reg<STATUS_SPEC>
• SWFC_CONF0
  SWFC_CONF0 (rw) register accessor: an alias for Reg<SWFC_CONF0_SPEC>
• SWFC_CONF1
  SWFC_CONF1 (rw) register accessor: an alias for Reg<SWFC_CONF1_SPEC>