Module esp32s2::pcnt::ctrl

Control register for all counters

Structs

• CTRL_SPEC
  Control register for all counters
• R
  Register CTRL reader
• W
  Register CTRL writer

Type Definitions

• CLK_EN_R
  Field CLK_EN reader - The registers clock gate enable signal of PCNT module. 1: the registers can be read and written by application. 0: the registers can not be read or written by application
• CLK_EN_W
  Field CLK_EN writer - The registers clock gate enable signal of PCNT module. 1: the registers can be read and written by application. 0: the registers can not be read or written by application
• CNT_PAUSE_U0_R
  Field CNT_PAUSE_U0 reader - Set this bit to freeze unit 1’s counter.
• CNT_PAUSE_U0_W
  Field CNT_PAUSE_U0 writer - Set this bit to freeze unit 1’s counter.
• CNT_PAUSE_U1_R
  Field CNT_PAUSE_U1 reader - Set this bit to freeze unit 3’s counter.
• CNT_PAUSE_U1_W
  Field CNT_PAUSE_U1 writer - Set this bit to freeze unit 3’s counter.
• CNT_PAUSE_U2_R
  Field CNT_PAUSE_U2 reader - Set this bit to freeze unit 5’s counter.
• CNT_PAUSE_U2_W
  Field CNT_PAUSE_U2 writer - Set this bit to freeze unit 5’s counter.
• CNT_PAUSE_U3_R
  Field CNT_PAUSE_U3 reader - Set this bit to freeze unit 7’s counter.
• CNT_PAUSE_U3_W
  Field CNT_PAUSE_U3 writer - Set this bit to freeze unit 7’s counter.
• CNT_RST_U0_R
  Field CNT_RST_U0 reader - Set this bit to clear unit 0’s counter.
• CNT_RST_U0_W
  Field CNT_RST_U0 writer - Set this bit to clear unit 0’s counter.
• CNT_RST_U1_R
  Field CNT_RST_U1 reader - Set this bit to clear unit 2’s counter.
• CNT_RST_U1_W
  Field CNT_RST_U1 writer - Set this bit to clear unit 2’s counter.
• CNT_RST_U2_R
  Field CNT_RST_U2 reader - Set this bit to clear unit 4’s counter.
• CNT_RST_U2_W
  Field CNT_RST_U2 writer - Set this bit to clear unit 4’s counter.
• CNT_RST_U3_R
  Field CNT_RST_U3 reader - Set this bit to clear unit 6’s counter.
• CNT_RST_U3_W
  Field CNT_RST_U3 writer - Set this bit to clear unit 6’s counter.