Struct esp32s2::i2s0::int_clr::W

pub struct W(_);

Register INT_CLR writer

Implementations

impl W

pub fn take_data_int_clr(&mut self) -> TAKE_DATA_INT_CLR_W<'_, 0>

Bit 0 - Set this bit to clear I2S_RX_TAKE_DATA_INT interrupt.

pub fn put_data_int_clr(&mut self) -> PUT_DATA_INT_CLR_W<'_, 1>

Bit 1 - Set this bit to clear I2S_TX_PUT_DATA_INT interrupt.

pub fn rx_wfull_int_clr(&mut self) -> RX_WFULL_INT_CLR_W<'_, 2>

Bit 2 - Set this bit to clear I2S_RX_WFULL_INT interrupt.

pub fn rx_rempty_int_clr(&mut self) -> RX_REMPTY_INT_CLR_W<'_, 3>

Bit 3 - Set this bit to clear I2S_RX_REMPTY_INT interrupt.

pub fn tx_wfull_int_clr(&mut self) -> TX_WFULL_INT_CLR_W<'_, 4>

Bit 4 - Set this bit to clear I2S_TX_WFULL_INT interrupt.

pub fn tx_rempty_int_clr(&mut self) -> TX_REMPTY_INT_CLR_W<'_, 5>

Bit 5 - Set this bit to clear I2S_TX_REMPTY_INT interrupt.

pub fn rx_hung_int_clr(&mut self) -> RX_HUNG_INT_CLR_W<'_, 6>

Bit 6 - Set this bit to clear I2S_RX_HUNG_INT interrupt.

pub fn tx_hung_int_clr(&mut self) -> TX_HUNG_INT_CLR_W<'_, 7>

Bit 7 - Set this bit to clear I2S_TX_HUNG_INT interrupt.

pub fn in_done_int_clr(&mut self) -> IN_DONE_INT_CLR_W<'_, 8>

Bit 8 - Set this bit to clear I2S_IN_DONE_INT interrupt.

pub fn in_suc_eof_int_clr(&mut self) -> IN_SUC_EOF_INT_CLR_W<'_, 9>

Bit 9 - Set this bit to clear I2S_IN_SUC_EOF_INT interrupt.

pub fn in_err_eof_int_clr(&mut self) -> IN_ERR_EOF_INT_CLR_W<'_, 10>

Bit 10 - Reserved.

pub fn out_done_int_clr(&mut self) -> OUT_DONE_INT_CLR_W<'_, 11>

Bit 11 - Set this bit to clear I2S_OUT_DONE_INT interrupt.

pub fn out_eof_int_clr(&mut self) -> OUT_EOF_INT_CLR_W<'_, 12>

Bit 12 - Set this bit to clear I2S_OUT_EOF_INT interrupt.

pub fn in_dscr_err_int_clr(&mut self) -> IN_DSCR_ERR_INT_CLR_W<'_, 13>

Bit 13 - Set this bit to clear I2S_IN_DSCR_ERR_INT interrupt.

pub fn out_dscr_err_int_clr(&mut self) -> OUT_DSCR_ERR_INT_CLR_W<'_, 14>

Bit 14 - Set this bit to clear I2S_OUT_DSCR_ERR_INT interrupt.

pub fn in_dscr_empty_int_clr(&mut self) -> IN_DSCR_EMPTY_INT_CLR_W<'_, 15>

Bit 15 - Set this bit to clear I2S_IN_DSCR_EMPTY_INT interrupt.

pub fn out_total_eof_int_clr(&mut self) -> OUT_TOTAL_EOF_INT_CLR_W<'_, 16>

Bit 16 - Set this bit to clear I2S_OUT_TOTAL_EOF_INT interrupt.

pub fn v_sync_int_clr(&mut self) -> V_SYNC_INT_CLR_W<'_, 17>

Bit 17 - Set this bit to clear I2S_V_SYNC_INT interrupt.

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<INT_CLR_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Safety

Read datasheet or reference manual to find what values are allowed to pass.

Trait Implementations

impl Deref for W

type Target = W<INT_CLR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<INT_CLR_SPEC>> for W

fn from(writer: W<INT_CLR_SPEC>) -> Self

Converts to this type from the input type.