Struct esp32s2_hal::peripherals::RTC_I2C

pub struct RTC_I2C { /* private fields */ }

Implementations

impl RTC_I2C

pub unsafe fn steal() -> RTC_I2C

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

pub const PTR: *const <RTC_I2C as Deref>::Target = {0x3f408c00 as *const <esp32s2::RTC_I2C as core::ops::Deref>::Target}

Pointer to the register block

pub const fn ptr() -> *const <RTC_I2C as Deref>::Target

Return the pointer to the register block

Methods from Deref<Target = RegisterBlock>

pub fn scl_low(&self) -> &Reg<SCL_LOW_SPEC>

0x00 - Configure the low level width of SCL

pub fn ctrl(&self) -> &Reg<CTRL_SPEC>

0x04 - Transmission setting

pub fn status(&self) -> &Reg<STATUS_SPEC>

0x08 - RTC I2C status

pub fn to(&self) -> &Reg<TO_SPEC>

0x0c - Configure RTC I2C timeout

pub fn slave_addr(&self) -> &Reg<SLAVE_ADDR_SPEC>

0x10 - Configure slave address

pub fn scl_high(&self) -> &Reg<SCL_HIGH_SPEC>

0x14 - Configure the high level width of SCL

pub fn sda_duty(&self) -> &Reg<SDA_DUTY_SPEC>

0x18 - Configure the SDA hold time after a negative SCL edge

pub fn scl_start_period(&self) -> &Reg<SCL_START_PERIOD_SPEC>

0x1c - Configure the delay between the SDA and SCL negative edge for a start condition

pub fn scl_stop_period(&self) -> &Reg<SCL_STOP_PERIOD_SPEC>

0x20 - Configure the delay between SDA and SCL positive edge for a stop condition

pub fn int_clr(&self) -> &Reg<INT_CLR_SPEC>

0x24 - Clear RTC I2C interrupt

pub fn int_raw(&self) -> &Reg<INT_RAW_SPEC>

0x28 - RTC I2C raw interrupt

pub fn int_st(&self) -> &Reg<INT_ST_SPEC>

0x2c - RTC I2C interrupt status

pub fn int_ena(&self) -> &Reg<INT_ENA_SPEC>

0x30 - Enable RTC I2C interrupt

pub fn data(&self) -> &Reg<DATA_SPEC>

0x34 - RTC I2C read data

pub fn cmd(&self, n: usize) -> &Reg<CMD_SPEC>

0x38..0x78 - RTC I2C Command %s

pub fn cmd_iter(&self) -> impl Iterator<Item = &Reg<CMD_SPEC>>

Iterator for array of: 0x38..0x78 - RTC I2C Command %s

pub fn date(&self) -> &Reg<DATE_SPEC>

0xfc - Version control register

Trait Implementations

impl Debug for RTC_I2C

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Deref for RTC_I2C

type Target = <RTC_I2C as Deref>::Target

The resulting type after dereferencing.

fn deref(&self) -> &<RTC_I2C as Deref>::Target

Dereferences the value.

impl DerefMut for RTC_I2C

fn deref_mut(&mut self) -> &mut <RTC_I2C as Deref>::Target

Mutably dereferences the value.

impl Peripheral for RTC_I2C

type P = RTC_I2C

Peripheral singleton type

unsafe fn clone_unchecked(&mut self) -> <RTC_I2C as Peripheral>::P

Unsafely clone (duplicate) a peripheral singleton.

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>

where Self: 'a,

Convert a value into a PeripheralRef.