Module esp32h2::mcpwm0::cap_ch2_cfg

Capture channel 2 configuration and enable

Structs

• CAP_CH2_CFG_SPEC
  Capture channel 2 configuration and enable

Type Aliases

• CAP2_EN_R
  Field CAP2_EN reader - When set, capture on channel 2 is enabled
• CAP2_EN_W
  Field CAP2_EN writer - When set, capture on channel 2 is enabled
• CAP2_IN_INVERT_R
  Field CAP2_IN_INVERT reader - when set, CAP2 form GPIO matrix is inverted before prescale
• CAP2_IN_INVERT_W
  Field CAP2_IN_INVERT writer - when set, CAP2 form GPIO matrix is inverted before prescale
• CAP2_MODE_R
  Field CAP2_MODE reader - Edge of capture on channel 2 after prescaling. When bit0 is set to 1: enable capture on the negative edge, When bit1 is set to 1: enable capture on the positive edge.
• CAP2_MODE_W
  Field CAP2_MODE writer - Edge of capture on channel 2 after prescaling. When bit0 is set to 1: enable capture on the negative edge, When bit1 is set to 1: enable capture on the positive edge.
• CAP2_PRESCALE_R
  Field CAP2_PRESCALE reader - Value of prescaling on possitive edge of CAP2. Prescale value = PWM_CAP2_PRESCALE + 1
• CAP2_PRESCALE_W
  Field CAP2_PRESCALE writer - Value of prescaling on possitive edge of CAP2. Prescale value = PWM_CAP2_PRESCALE + 1
• CAP2_SW_W
  Field CAP2_SW writer - Write 1 will trigger a software forced capture on channel 2
• R
  Register CAP_CH2_CFG reader
• W
  Register CAP_CH2_CFG writer