Module rd_repeat_data3

BLOCK0 data register 4.

Structs

• RD_REPEAT_DATA3_SPEC
  BLOCK0 data register 4.

Type Aliases

• DIS_DIRECT_BOOT_R
  Field DIS_DIRECT_BOOT reader - Represents whether direct boot mode is disabled or enabled. 1: disabled. 0: enabled.
• DIS_DOWNLOAD_MODE_R
  Field DIS_DOWNLOAD_MODE reader - Represents whether Download mode is disabled or enabled. 1: disabled. 0: enabled.
• DIS_USB_PRINT_R
  Field DIS_USB_PRINT reader - Represents whether print from USB-Serial-JTAG is disabled or enabled. 1: disabled. 0: enabled.
• DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE_R
  Field DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE reader - Represents whether the USB-Serial-JTAG download function is disabled or enabled. 1: disabled. 0: enabled.
• ENABLE_SECURITY_DOWNLOAD_R
  Field ENABLE_SECURITY_DOWNLOAD reader - Represents whether security download is enabled or disabled. 1: enabled. 0: disabled.
• FORCE_SEND_RESUME_R
  Field FORCE_SEND_RESUME reader - Represents whether ROM code is forced to send a resume command during SPI boot. 1: forced. 0:not forced.
• HYS_EN_PAD0_R
  Field HYS_EN_PAD0 reader - Represents whether the hysteresis function of corresponding PAD is enabled. 1: enabled. 0:disabled.
• R
  Register RD_REPEAT_DATA3 reader
• RPT4_RESERVED3_5_R
  Field RPT4_RESERVED3_5 reader - Reserved.
• SECURE_BOOT_DISABLE_FAST_WAKE_R
  Field SECURE_BOOT_DISABLE_FAST_WAKE reader - Represents whether FAST VERIFY ON WAKE is disabled or enabled when Secure Boot is enabled. 1: disabled. 0: enabled.
• SECURE_VERSION_R
  Field SECURE_VERSION reader - Represents the version used by ESP-IDF anti-rollback feature.
• UART_PRINT_CONTROL_R
  Field UART_PRINT_CONTROL reader - Represents the type of UART printing. 00: force enable printing. 01: enable printing when GPIO8 is reset at low level. 10: enable printing when GPIO8 is reset at high level. 11: force disable printing.