Expand description
UART (Universal Asynchronous Receiver-Transmitter) Controller 0
Modules§
- UART AFIFO Status
- AT escape sequence detection configuration
- Timeout configuration
- Post-sequence timing configuration
- Pre-sequence timing configuration
- UART core clock configuration
- Clock divider configuration
- a
- Configuration register 1
- UART Version register
- FIFO data register
- UART transmit and receive status.
- Autobaud minimum high pulse duration register
- Hardware flow-control configuration
- UART ID register
- Frame-end idle configuration
- Interrupt clear bits
- Interrupt enable bits
- Raw interrupt status
- Masked interrupt status
- Autobaud minimum low pulse duration register
- UART memory power configuration
- Rx-SRAM write and read offset address.
- Tx-SRAM write and read offset address.
- Autobaud low pulse register
- Autobaud high pulse register
- UART Registers Configuration Update register
- RS485 mode configuration
- Rx Filter configuration
- Autobaud edge change count register
- UART sleep configure register 0
- UART sleep configure register 1
- UART sleep configure register 2
- UART status register
- Software flow-control character configuration
- Software flow-control character configuration
- UART threshold and allocation configuration
- Tx Break character configuration
Structs§
- Register block
Type Aliases§
- AFIFO_STATUS (r) register accessor: UART AFIFO Status
- AT_CMD_CHAR (rw) register accessor: AT escape sequence detection configuration
- AT_CMD_GAPTOUT (rw) register accessor: Timeout configuration
- AT_CMD_POSTCNT (rw) register accessor: Post-sequence timing configuration
- AT_CMD_PRECNT (rw) register accessor: Pre-sequence timing configuration
- CLKDIV (rw) register accessor: Clock divider configuration
- CLK_CONF (rw) register accessor: UART core clock configuration
- CONF0 (rw) register accessor: a
- CONF1 (rw) register accessor: Configuration register 1
- DATE (rw) register accessor: UART Version register
- FIFO (rw) register accessor: FIFO data register
- FSM_STATUS (r) register accessor: UART transmit and receive status.
- HIGHPULSE (r) register accessor: Autobaud minimum high pulse duration register
- HWFC_CONF (rw) register accessor: Hardware flow-control configuration
- ID (rw) register accessor: UART ID register
- IDLE_CONF (rw) register accessor: Frame-end idle configuration
- INT_CLR (w) register accessor: Interrupt clear bits
- INT_ENA (rw) register accessor: Interrupt enable bits
- INT_RAW (rw) register accessor: Raw interrupt status
- INT_ST (r) register accessor: Masked interrupt status
- LOWPULSE (r) register accessor: Autobaud minimum low pulse duration register
- MEM_CONF (rw) register accessor: UART memory power configuration
- MEM_RX_STATUS (r) register accessor: Rx-SRAM write and read offset address.
- MEM_TX_STATUS (r) register accessor: Tx-SRAM write and read offset address.
- NEGPULSE (r) register accessor: Autobaud low pulse register
- POSPULSE (r) register accessor: Autobaud high pulse register
- REG_UPDATE (rw) register accessor: UART Registers Configuration Update register
- RS485_CONF (rw) register accessor: RS485 mode configuration
- RXD_CNT (r) register accessor: Autobaud edge change count register
- RX_FILT (rw) register accessor: Rx Filter configuration
- SLEEP_CONF0 (rw) register accessor: UART sleep configure register 0
- SLEEP_CONF1 (rw) register accessor: UART sleep configure register 1
- SLEEP_CONF2 (rw) register accessor: UART sleep configure register 2
- STATUS (r) register accessor: UART status register
- SWFC_CONF0 (rw) register accessor: Software flow-control character configuration
- SWFC_CONF1 (rw) register accessor: Software flow-control character configuration
- TOUT_CONF (rw) register accessor: UART threshold and allocation configuration
- TXBRK_CONF (rw) register accessor: Tx Break character configuration