Module esp32c6::mcpwm0::gen2_force

Permissives to force PWM2A and PWM2B outputs by software

Structs

• GEN2_FORCE_SPEC
  Permissives to force PWM2A and PWM2B outputs by software
• R
  Register GEN2_FORCE reader
• W
  Register GEN2_FORCE writer

Type Definitions

• GEN2_A_CNTUFORCE_MODE_R
  Field GEN2_A_CNTUFORCE_MODE reader - Continuous software force mode for PWM2A. 0: disabled, 1: low, 2: high, 3: disabled
• GEN2_A_CNTUFORCE_MODE_W
  Field GEN2_A_CNTUFORCE_MODE writer - Continuous software force mode for PWM2A. 0: disabled, 1: low, 2: high, 3: disabled
• GEN2_A_NCIFORCE_MODE_R
  Field GEN2_A_NCIFORCE_MODE reader - non-continuous immediate software force mode for PWM2A, 0: disabled, 1: low, 2: high, 3: disabled
• GEN2_A_NCIFORCE_MODE_W
  Field GEN2_A_NCIFORCE_MODE writer - non-continuous immediate software force mode for PWM2A, 0: disabled, 1: low, 2: high, 3: disabled
• GEN2_A_NCIFORCE_R
  Field GEN2_A_NCIFORCE reader - Trigger of non-continuous immediate software-force event for PWM2A, a toggle will trigger a force event.
• GEN2_A_NCIFORCE_W
  Field GEN2_A_NCIFORCE writer - Trigger of non-continuous immediate software-force event for PWM2A, a toggle will trigger a force event.
• GEN2_B_CNTUFORCE_MODE_R
  Field GEN2_B_CNTUFORCE_MODE reader - Continuous software force mode for PWM2B. 0: disabled, 1: low, 2: high, 3: disabled
• GEN2_B_CNTUFORCE_MODE_W
  Field GEN2_B_CNTUFORCE_MODE writer - Continuous software force mode for PWM2B. 0: disabled, 1: low, 2: high, 3: disabled
• GEN2_B_NCIFORCE_MODE_R
  Field GEN2_B_NCIFORCE_MODE reader - non-continuous immediate software force mode for PWM2B, 0: disabled, 1: low, 2: high, 3: disabled
• GEN2_B_NCIFORCE_MODE_W
  Field GEN2_B_NCIFORCE_MODE writer - non-continuous immediate software force mode for PWM2B, 0: disabled, 1: low, 2: high, 3: disabled
• GEN2_B_NCIFORCE_R
  Field GEN2_B_NCIFORCE reader - Trigger of non-continuous immediate software-force event for PWM2B, a toggle will trigger a force event.
• GEN2_B_NCIFORCE_W
  Field GEN2_B_NCIFORCE writer - Trigger of non-continuous immediate software-force event for PWM2B, a toggle will trigger a force event.
• GEN2_CNTUFORCE_UPMETHOD_R
  Field GEN2_CNTUFORCE_UPMETHOD reader - Updating method for continuous software force of PWM generator 2. When all bits are set to 0: immediately, when bit0 is set to 1: TEZ,when bit1 is set to 1: TEP, when bit2 is set to 1: TEA, when bit3 is set to 1: TEB, when bit4 is set to 1: sync, when bit5 is set to 1: disable update. (TEA/B here and below means an event generated when the timer’s value equals to that of register A/B.)
• GEN2_CNTUFORCE_UPMETHOD_W
  Field GEN2_CNTUFORCE_UPMETHOD writer - Updating method for continuous software force of PWM generator 2. When all bits are set to 0: immediately, when bit0 is set to 1: TEZ,when bit1 is set to 1: TEP, when bit2 is set to 1: TEA, when bit3 is set to 1: TEB, when bit4 is set to 1: sync, when bit5 is set to 1: disable update. (TEA/B here and below means an event generated when the timer’s value equals to that of register A/B.)