1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151

#[doc = "Register `MODE` reader"]
pub struct R(crate::R<MODE_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<MODE_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<MODE_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<MODE_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `MODE` writer"]
pub struct W(crate::W<MODE_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<MODE_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<MODE_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<MODE_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Field `RESET_MODE` reader - 1: reset, detection of a set reset mode bit results in aborting the current transmission/reception of a message and entering the reset mode. 0: normal, on the '1-to-0' transition of the reset mode bit, the TWAI controller returns to the operating mode."]
pub type RESET_MODE_R = crate::BitReader;
#[doc = "Field `RESET_MODE` writer - 1: reset, detection of a set reset mode bit results in aborting the current transmission/reception of a message and entering the reset mode. 0: normal, on the '1-to-0' transition of the reset mode bit, the TWAI controller returns to the operating mode."]
pub type RESET_MODE_W<'a, const O: u8> = crate::BitWriter<'a, MODE_SPEC, O>;
#[doc = "Field `LISTEN_ONLY_MODE` reader - 1: listen only, in this mode the TWAI controller would give no acknowledge to the TWAI-bus, even if a message is received successfully. The error counters are stopped at the current value. 0: normal."]
pub type LISTEN_ONLY_MODE_R = crate::BitReader;
#[doc = "Field `LISTEN_ONLY_MODE` writer - 1: listen only, in this mode the TWAI controller would give no acknowledge to the TWAI-bus, even if a message is received successfully. The error counters are stopped at the current value. 0: normal."]
pub type LISTEN_ONLY_MODE_W<'a, const O: u8> = crate::BitWriter<'a, MODE_SPEC, O>;
#[doc = "Field `SELF_TEST_MODE` reader - 1: self test, in this mode a full node test is possible without any other active node on the bus using the self reception request command. The TWAI controller will perform a successful transmission, even if there is no acknowledge received. 0: normal, an acknowledge is required for successful transmission."]
pub type SELF_TEST_MODE_R = crate::BitReader;
#[doc = "Field `SELF_TEST_MODE` writer - 1: self test, in this mode a full node test is possible without any other active node on the bus using the self reception request command. The TWAI controller will perform a successful transmission, even if there is no acknowledge received. 0: normal, an acknowledge is required for successful transmission."]
pub type SELF_TEST_MODE_W<'a, const O: u8> = crate::BitWriter<'a, MODE_SPEC, O>;
#[doc = "Field `RX_FILTER_MODE` reader - 1:single, the single acceptance filter option is enabled (one filter with the length of 32 bit is active). 0:dual, the dual acceptance filter option is enabled (two filters, each with the length of 16 bit are active)."]
pub type RX_FILTER_MODE_R = crate::BitReader;
#[doc = "Field `RX_FILTER_MODE` writer - 1:single, the single acceptance filter option is enabled (one filter with the length of 32 bit is active). 0:dual, the dual acceptance filter option is enabled (two filters, each with the length of 16 bit are active)."]
pub type RX_FILTER_MODE_W<'a, const O: u8> = crate::BitWriter<'a, MODE_SPEC, O>;
impl R {
    #[doc = "Bit 0 - 1: reset, detection of a set reset mode bit results in aborting the current transmission/reception of a message and entering the reset mode. 0: normal, on the '1-to-0' transition of the reset mode bit, the TWAI controller returns to the operating mode."]
    #[inline(always)]
    pub fn reset_mode(&self) -> RESET_MODE_R {
        RESET_MODE_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - 1: listen only, in this mode the TWAI controller would give no acknowledge to the TWAI-bus, even if a message is received successfully. The error counters are stopped at the current value. 0: normal."]
    #[inline(always)]
    pub fn listen_only_mode(&self) -> LISTEN_ONLY_MODE_R {
        LISTEN_ONLY_MODE_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - 1: self test, in this mode a full node test is possible without any other active node on the bus using the self reception request command. The TWAI controller will perform a successful transmission, even if there is no acknowledge received. 0: normal, an acknowledge is required for successful transmission."]
    #[inline(always)]
    pub fn self_test_mode(&self) -> SELF_TEST_MODE_R {
        SELF_TEST_MODE_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - 1:single, the single acceptance filter option is enabled (one filter with the length of 32 bit is active). 0:dual, the dual acceptance filter option is enabled (two filters, each with the length of 16 bit are active)."]
    #[inline(always)]
    pub fn rx_filter_mode(&self) -> RX_FILTER_MODE_R {
        RX_FILTER_MODE_R::new(((self.bits >> 3) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("MODE")
            .field("reset_mode", &format_args!("{}", self.reset_mode().bit()))
            .field(
                "listen_only_mode",
                &format_args!("{}", self.listen_only_mode().bit()),
            )
            .field(
                "self_test_mode",
                &format_args!("{}", self.self_test_mode().bit()),
            )
            .field(
                "rx_filter_mode",
                &format_args!("{}", self.rx_filter_mode().bit()),
            )
            .finish()
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for crate::generic::Reg<MODE_SPEC> {
    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
        self.read().fmt(f)
    }
}
impl W {
    #[doc = "Bit 0 - 1: reset, detection of a set reset mode bit results in aborting the current transmission/reception of a message and entering the reset mode. 0: normal, on the '1-to-0' transition of the reset mode bit, the TWAI controller returns to the operating mode."]
    #[inline(always)]
    #[must_use]
    pub fn reset_mode(&mut self) -> RESET_MODE_W<0> {
        RESET_MODE_W::new(self)
    }
    #[doc = "Bit 1 - 1: listen only, in this mode the TWAI controller would give no acknowledge to the TWAI-bus, even if a message is received successfully. The error counters are stopped at the current value. 0: normal."]
    #[inline(always)]
    #[must_use]
    pub fn listen_only_mode(&mut self) -> LISTEN_ONLY_MODE_W<1> {
        LISTEN_ONLY_MODE_W::new(self)
    }
    #[doc = "Bit 2 - 1: self test, in this mode a full node test is possible without any other active node on the bus using the self reception request command. The TWAI controller will perform a successful transmission, even if there is no acknowledge received. 0: normal, an acknowledge is required for successful transmission."]
    #[inline(always)]
    #[must_use]
    pub fn self_test_mode(&mut self) -> SELF_TEST_MODE_W<2> {
        SELF_TEST_MODE_W::new(self)
    }
    #[doc = "Bit 3 - 1:single, the single acceptance filter option is enabled (one filter with the length of 32 bit is active). 0:dual, the dual acceptance filter option is enabled (two filters, each with the length of 16 bit are active)."]
    #[inline(always)]
    #[must_use]
    pub fn rx_filter_mode(&mut self) -> RX_FILTER_MODE_W<3> {
        RX_FILTER_MODE_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "TWAI mode register.\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [mode](index.html) module"]
pub struct MODE_SPEC;
impl crate::RegisterSpec for MODE_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [mode::R](R) reader structure"]
impl crate::Readable for MODE_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [mode::W](W) writer structure"]
impl crate::Writable for MODE_SPEC {
    type Writer = W;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets MODE to value 0x01"]
impl crate::Resettable for MODE_SPEC {
    const RESET_VALUE: Self::Ux = 0x01;
}