1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166

#[doc = "Register `I2C_INT_CLR` writer"]
pub type W = crate::W<I2C_INT_CLR_SPEC>;
#[doc = "Field `I2C_RXFIFO_WM_INT_CLR` writer - Set this bit to clear I2C_RXFIFO_WM_INT interrupt."]
pub type I2C_RXFIFO_WM_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_TXFIFO_WM_INT_CLR` writer - Set this bit to clear I2C_TXFIFO_WM_INT interrupt."]
pub type I2C_TXFIFO_WM_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_RXFIFO_OVF_INT_CLR` writer - Set this bit to clear I2C_RXFIFO_OVF_INT interrupt."]
pub type I2C_RXFIFO_OVF_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_END_DETECT_INT_CLR` writer - Set this bit to clear the I2C_END_DETECT_INT interrupt."]
pub type I2C_END_DETECT_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_BYTE_TRANS_DONE_INT_CLR` writer - Set this bit to clear the I2C_END_DETECT_INT interrupt."]
pub type I2C_BYTE_TRANS_DONE_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_ARBITRATION_LOST_INT_CLR` writer - Set this bit to clear the I2C_ARBITRATION_LOST_INT interrupt."]
pub type I2C_ARBITRATION_LOST_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_MST_TXFIFO_UDF_INT_CLR` writer - Set this bit to clear I2C_TRANS_COMPLETE_INT interrupt."]
pub type I2C_MST_TXFIFO_UDF_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_TRANS_COMPLETE_INT_CLR` writer - Set this bit to clear the I2C_TRANS_COMPLETE_INT interrupt."]
pub type I2C_TRANS_COMPLETE_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_TIME_OUT_INT_CLR` writer - Set this bit to clear the I2C_TIME_OUT_INT interrupt."]
pub type I2C_TIME_OUT_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_TRANS_START_INT_CLR` writer - Set this bit to clear the I2C_TRANS_START_INT interrupt."]
pub type I2C_TRANS_START_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_NACK_INT_CLR` writer - Set this bit to clear I2C_SLAVE_STRETCH_INT interrupt."]
pub type I2C_NACK_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_TXFIFO_OVF_INT_CLR` writer - Set this bit to clear I2C_TXFIFO_OVF_INT interrupt."]
pub type I2C_TXFIFO_OVF_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_RXFIFO_UDF_INT_CLR` writer - Set this bit to clear I2C_RXFIFO_UDF_INT interrupt."]
pub type I2C_RXFIFO_UDF_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_SCL_ST_TO_INT_CLR` writer - Set this bit to clear I2C_SCL_ST_TO_INT interrupt."]
pub type I2C_SCL_ST_TO_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_SCL_MAIN_ST_TO_INT_CLR` writer - Set this bit to clear I2C_SCL_MAIN_ST_TO_INT interrupt."]
pub type I2C_SCL_MAIN_ST_TO_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `I2C_DET_START_INT_CLR` writer - Set this bit to clear I2C_DET_START_INT interrupt."]
pub type I2C_DET_START_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for crate::generic::Reg<I2C_INT_CLR_SPEC> {
    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
        write!(f, "(not readable)")
    }
}
impl W {
    #[doc = "Bit 0 - Set this bit to clear I2C_RXFIFO_WM_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_rxfifo_wm_int_clr(&mut self) -> I2C_RXFIFO_WM_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_RXFIFO_WM_INT_CLR_W::new(self, 0)
    }
    #[doc = "Bit 1 - Set this bit to clear I2C_TXFIFO_WM_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_txfifo_wm_int_clr(&mut self) -> I2C_TXFIFO_WM_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_TXFIFO_WM_INT_CLR_W::new(self, 1)
    }
    #[doc = "Bit 2 - Set this bit to clear I2C_RXFIFO_OVF_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_rxfifo_ovf_int_clr(&mut self) -> I2C_RXFIFO_OVF_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_RXFIFO_OVF_INT_CLR_W::new(self, 2)
    }
    #[doc = "Bit 3 - Set this bit to clear the I2C_END_DETECT_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_end_detect_int_clr(&mut self) -> I2C_END_DETECT_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_END_DETECT_INT_CLR_W::new(self, 3)
    }
    #[doc = "Bit 4 - Set this bit to clear the I2C_END_DETECT_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_byte_trans_done_int_clr(
        &mut self,
    ) -> I2C_BYTE_TRANS_DONE_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_BYTE_TRANS_DONE_INT_CLR_W::new(self, 4)
    }
    #[doc = "Bit 5 - Set this bit to clear the I2C_ARBITRATION_LOST_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_arbitration_lost_int_clr(
        &mut self,
    ) -> I2C_ARBITRATION_LOST_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_ARBITRATION_LOST_INT_CLR_W::new(self, 5)
    }
    #[doc = "Bit 6 - Set this bit to clear I2C_TRANS_COMPLETE_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_mst_txfifo_udf_int_clr(&mut self) -> I2C_MST_TXFIFO_UDF_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_MST_TXFIFO_UDF_INT_CLR_W::new(self, 6)
    }
    #[doc = "Bit 7 - Set this bit to clear the I2C_TRANS_COMPLETE_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_trans_complete_int_clr(&mut self) -> I2C_TRANS_COMPLETE_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_TRANS_COMPLETE_INT_CLR_W::new(self, 7)
    }
    #[doc = "Bit 8 - Set this bit to clear the I2C_TIME_OUT_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_time_out_int_clr(&mut self) -> I2C_TIME_OUT_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_TIME_OUT_INT_CLR_W::new(self, 8)
    }
    #[doc = "Bit 9 - Set this bit to clear the I2C_TRANS_START_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_trans_start_int_clr(&mut self) -> I2C_TRANS_START_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_TRANS_START_INT_CLR_W::new(self, 9)
    }
    #[doc = "Bit 10 - Set this bit to clear I2C_SLAVE_STRETCH_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_nack_int_clr(&mut self) -> I2C_NACK_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_NACK_INT_CLR_W::new(self, 10)
    }
    #[doc = "Bit 11 - Set this bit to clear I2C_TXFIFO_OVF_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_txfifo_ovf_int_clr(&mut self) -> I2C_TXFIFO_OVF_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_TXFIFO_OVF_INT_CLR_W::new(self, 11)
    }
    #[doc = "Bit 12 - Set this bit to clear I2C_RXFIFO_UDF_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_rxfifo_udf_int_clr(&mut self) -> I2C_RXFIFO_UDF_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_RXFIFO_UDF_INT_CLR_W::new(self, 12)
    }
    #[doc = "Bit 13 - Set this bit to clear I2C_SCL_ST_TO_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_scl_st_to_int_clr(&mut self) -> I2C_SCL_ST_TO_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_SCL_ST_TO_INT_CLR_W::new(self, 13)
    }
    #[doc = "Bit 14 - Set this bit to clear I2C_SCL_MAIN_ST_TO_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_scl_main_st_to_int_clr(&mut self) -> I2C_SCL_MAIN_ST_TO_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_SCL_MAIN_ST_TO_INT_CLR_W::new(self, 14)
    }
    #[doc = "Bit 15 - Set this bit to clear I2C_DET_START_INT interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn i2c_det_start_int_clr(&mut self) -> I2C_DET_START_INT_CLR_W<I2C_INT_CLR_SPEC> {
        I2C_DET_START_INT_CLR_W::new(self, 15)
    }
    #[doc = r" Writes raw bits to the register."]
    #[doc = r""]
    #[doc = r" # Safety"]
    #[doc = r""]
    #[doc = r" Passing incorrect value can cause undefined behaviour. See reference manual"]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.bits = bits;
        self
    }
}
#[doc = "Interrupt clear bits\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`i2c_int_clr::W`](W). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct I2C_INT_CLR_SPEC;
impl crate::RegisterSpec for I2C_INT_CLR_SPEC {
    type Ux = u32;
}
#[doc = "`write(|w| ..)` method takes [`i2c_int_clr::W`](W) writer structure"]
impl crate::Writable for I2C_INT_CLR_SPEC {
    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets I2C_INT_CLR to value 0"]
impl crate::Resettable for I2C_INT_CLR_SPEC {
    const RESET_VALUE: Self::Ux = 0;
}