Expand description
I2C command register %s
Structs§
- COMD_
SPEC - I2C command register %s
Type Aliases§
- COMMAND_
DONE_ R - Field
COMMAND_DONE
reader - When command 0 is done in I2C Master mode, this bit changes to high level. - COMMAND_
DONE_ W - Field
COMMAND_DONE
writer - When command 0 is done in I2C Master mode, this bit changes to high level. - COMMAND_
R - Field
COMMAND
reader - This is the content of command 0. It consists of three parts: op_code is the command, 0: RSTART, 1: WRITE, 2: READ, 3: STOP, 4: END. Byte_num represents the number of bytes that need to be sent or received. ack_check_en, ack_exp and ack are used to control the ACK bit. See I2C cmd structure for more Information. - COMMAND_
W - Field
COMMAND
writer - This is the content of command 0. It consists of three parts: op_code is the command, 0: RSTART, 1: WRITE, 2: READ, 3: STOP, 4: END. Byte_num represents the number of bytes that need to be sent or received. ack_check_en, ack_exp and ack are used to control the ACK bit. See I2C cmd structure for more Information. - R
- Register
COMD%s
reader - W
- Register
COMD%s
writer