Module esp32c3::twai0::mode

Mode Register

Structs

• MODE_SPEC
  Mode Register

Type Aliases

• LISTEN_ONLY_MODE_R
  Field LISTEN_ONLY_MODE reader - 1: Listen only mode. In this mode the nodes will only receive messages from the bus, without generating the acknowledge signal nor updating the RX error counter.
• LISTEN_ONLY_MODE_W
  Field LISTEN_ONLY_MODE writer - 1: Listen only mode. In this mode the nodes will only receive messages from the bus, without generating the acknowledge signal nor updating the RX error counter.
• R
  Register MODE reader
• RESET_MODE_R
  Field RESET_MODE reader - This bit is used to configure the operating mode of the TWAI Controller. 1: Reset mode; 0: Operating mode.
• RESET_MODE_W
  Field RESET_MODE writer - This bit is used to configure the operating mode of the TWAI Controller. 1: Reset mode; 0: Operating mode.
• RX_FILTER_MODE_R
  Field RX_FILTER_MODE reader - This bit is used to configure the filter mode. 0: Dual filter mode; 1: Single filter mode.
• RX_FILTER_MODE_W
  Field RX_FILTER_MODE writer - This bit is used to configure the filter mode. 0: Dual filter mode; 1: Single filter mode.
• SELF_TEST_MODE_R
  Field SELF_TEST_MODE reader - 1: Self test mode. In this mode the TX nodes can perform a successful transmission without receiving the acknowledge signal. This mode is often used to test a single node with the self reception request command.
• SELF_TEST_MODE_W
  Field SELF_TEST_MODE writer - 1: Self test mode. In this mode the TX nodes can perform a successful transmission without receiving the acknowledge signal. This mode is often used to test a single node with the self reception request command.
• W
  Register MODE writer