Struct esp32c3::uart::int_clr::W

pub struct W(_);

Register INT_CLR writer

Implementations

impl W

pub fn rxfifo_full_int_clr(&mut self) -> RXFIFO_FULL_INT_CLR_W<'_>

Bit 0 - Set this bit to clear the rxfifo_full_int_raw interrupt.

pub fn txfifo_empty_int_clr(&mut self) -> TXFIFO_EMPTY_INT_CLR_W<'_>

Bit 1 - Set this bit to clear txfifo_empty_int_raw interrupt.

pub fn parity_err_int_clr(&mut self) -> PARITY_ERR_INT_CLR_W<'_>

Bit 2 - Set this bit to clear parity_err_int_raw interrupt.

pub fn frm_err_int_clr(&mut self) -> FRM_ERR_INT_CLR_W<'_>

Bit 3 - Set this bit to clear frm_err_int_raw interrupt.

pub fn rxfifo_ovf_int_clr(&mut self) -> RXFIFO_OVF_INT_CLR_W<'_>

Bit 4 - Set this bit to clear rxfifo_ovf_int_raw interrupt.

pub fn dsr_chg_int_clr(&mut self) -> DSR_CHG_INT_CLR_W<'_>

Bit 5 - Set this bit to clear the dsr_chg_int_raw interrupt.

pub fn cts_chg_int_clr(&mut self) -> CTS_CHG_INT_CLR_W<'_>

Bit 6 - Set this bit to clear the cts_chg_int_raw interrupt.

pub fn brk_det_int_clr(&mut self) -> BRK_DET_INT_CLR_W<'_>

Bit 7 - Set this bit to clear the brk_det_int_raw interrupt.

pub fn rxfifo_tout_int_clr(&mut self) -> RXFIFO_TOUT_INT_CLR_W<'_>

Bit 8 - Set this bit to clear the rxfifo_tout_int_raw interrupt.

pub fn sw_xon_int_clr(&mut self) -> SW_XON_INT_CLR_W<'_>

Bit 9 - Set this bit to clear the sw_xon_int_raw interrupt.

pub fn sw_xoff_int_clr(&mut self) -> SW_XOFF_INT_CLR_W<'_>

Bit 10 - Set this bit to clear the sw_xoff_int_raw interrupt.

pub fn glitch_det_int_clr(&mut self) -> GLITCH_DET_INT_CLR_W<'_>

Bit 11 - Set this bit to clear the glitch_det_int_raw interrupt.

pub fn tx_brk_done_int_clr(&mut self) -> TX_BRK_DONE_INT_CLR_W<'_>

Bit 12 - Set this bit to clear the tx_brk_done_int_raw interrupt..

pub fn tx_brk_idle_done_int_clr(&mut self) -> TX_BRK_IDLE_DONE_INT_CLR_W<'_>

Bit 13 - Set this bit to clear the tx_brk_idle_done_int_raw interrupt.

pub fn tx_done_int_clr(&mut self) -> TX_DONE_INT_CLR_W<'_>

Bit 14 - Set this bit to clear the tx_done_int_raw interrupt.

pub fn rs485_parity_err_int_clr(&mut self) -> RS485_PARITY_ERR_INT_CLR_W<'_>

Bit 15 - Set this bit to clear the rs485_parity_err_int_raw interrupt.

pub fn rs485_frm_err_int_clr(&mut self) -> RS485_FRM_ERR_INT_CLR_W<'_>

Bit 16 - Set this bit to clear the rs485_frm_err_int_raw interrupt.

pub fn rs485_clash_int_clr(&mut self) -> RS485_CLASH_INT_CLR_W<'_>

Bit 17 - Set this bit to clear the rs485_clash_int_raw interrupt.

pub fn at_cmd_char_det_int_clr(&mut self) -> AT_CMD_CHAR_DET_INT_CLR_W<'_>

Bit 18 - Set this bit to clear the at_cmd_char_det_int_raw interrupt.

pub fn wakeup_int_clr(&mut self) -> WAKEUP_INT_CLR_W<'_>

Bit 19 - Set this bit to clear the uart_wakeup_int_raw interrupt.

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<INT_CLR_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<INT_CLR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<INT_CLR_SPEC>> for W

fn from(writer: W<INT_CLR_SPEC>) -> Self

Performs the conversion.