1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154

#[doc = "Register `OUT_CONF0_CH2` reader"]
pub type R = crate::R<OUT_CONF0_CH2_SPEC>;
#[doc = "Register `OUT_CONF0_CH2` writer"]
pub type W = crate::W<OUT_CONF0_CH2_SPEC>;
#[doc = "Field `OUT_RST` reader - This bit is used to reset DMA channel 2 Tx FSM and Tx FIFO pointer."]
pub type OUT_RST_R = crate::BitReader;
#[doc = "Field `OUT_RST` writer - This bit is used to reset DMA channel 2 Tx FSM and Tx FIFO pointer."]
pub type OUT_RST_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `OUT_LOOP_TEST` reader - reserved"]
pub type OUT_LOOP_TEST_R = crate::BitReader;
#[doc = "Field `OUT_LOOP_TEST` writer - reserved"]
pub type OUT_LOOP_TEST_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `OUT_AUTO_WRBACK` reader - Set this bit to enable automatic outlink-writeback when all the data in tx buffer has been transmitted."]
pub type OUT_AUTO_WRBACK_R = crate::BitReader;
#[doc = "Field `OUT_AUTO_WRBACK` writer - Set this bit to enable automatic outlink-writeback when all the data in tx buffer has been transmitted."]
pub type OUT_AUTO_WRBACK_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `OUT_EOF_MODE` reader - EOF flag generation mode when transmitting data. 1: EOF flag for Tx channel 2 is generated when data need to transmit has been popped from FIFO in DMA"]
pub type OUT_EOF_MODE_R = crate::BitReader;
#[doc = "Field `OUT_EOF_MODE` writer - EOF flag generation mode when transmitting data. 1: EOF flag for Tx channel 2 is generated when data need to transmit has been popped from FIFO in DMA"]
pub type OUT_EOF_MODE_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `OUTDSCR_BURST_EN` reader - Set this bit to 1 to enable INCR burst transfer for Tx channel 2 reading link descriptor when accessing internal SRAM."]
pub type OUTDSCR_BURST_EN_R = crate::BitReader;
#[doc = "Field `OUTDSCR_BURST_EN` writer - Set this bit to 1 to enable INCR burst transfer for Tx channel 2 reading link descriptor when accessing internal SRAM."]
pub type OUTDSCR_BURST_EN_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `OUT_DATA_BURST_EN` reader - Set this bit to 1 to enable INCR burst transfer for Tx channel 2 transmitting data when accessing internal SRAM."]
pub type OUT_DATA_BURST_EN_R = crate::BitReader;
#[doc = "Field `OUT_DATA_BURST_EN` writer - Set this bit to 1 to enable INCR burst transfer for Tx channel 2 transmitting data when accessing internal SRAM."]
pub type OUT_DATA_BURST_EN_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
impl R {
    #[doc = "Bit 0 - This bit is used to reset DMA channel 2 Tx FSM and Tx FIFO pointer."]
    #[inline(always)]
    pub fn out_rst(&self) -> OUT_RST_R {
        OUT_RST_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - reserved"]
    #[inline(always)]
    pub fn out_loop_test(&self) -> OUT_LOOP_TEST_R {
        OUT_LOOP_TEST_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - Set this bit to enable automatic outlink-writeback when all the data in tx buffer has been transmitted."]
    #[inline(always)]
    pub fn out_auto_wrback(&self) -> OUT_AUTO_WRBACK_R {
        OUT_AUTO_WRBACK_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - EOF flag generation mode when transmitting data. 1: EOF flag for Tx channel 2 is generated when data need to transmit has been popped from FIFO in DMA"]
    #[inline(always)]
    pub fn out_eof_mode(&self) -> OUT_EOF_MODE_R {
        OUT_EOF_MODE_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4 - Set this bit to 1 to enable INCR burst transfer for Tx channel 2 reading link descriptor when accessing internal SRAM."]
    #[inline(always)]
    pub fn outdscr_burst_en(&self) -> OUTDSCR_BURST_EN_R {
        OUTDSCR_BURST_EN_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5 - Set this bit to 1 to enable INCR burst transfer for Tx channel 2 transmitting data when accessing internal SRAM."]
    #[inline(always)]
    pub fn out_data_burst_en(&self) -> OUT_DATA_BURST_EN_R {
        OUT_DATA_BURST_EN_R::new(((self.bits >> 5) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("OUT_CONF0_CH2")
            .field("out_rst", &format_args!("{}", self.out_rst().bit()))
            .field(
                "out_loop_test",
                &format_args!("{}", self.out_loop_test().bit()),
            )
            .field(
                "out_auto_wrback",
                &format_args!("{}", self.out_auto_wrback().bit()),
            )
            .field(
                "out_eof_mode",
                &format_args!("{}", self.out_eof_mode().bit()),
            )
            .field(
                "outdscr_burst_en",
                &format_args!("{}", self.outdscr_burst_en().bit()),
            )
            .field(
                "out_data_burst_en",
                &format_args!("{}", self.out_data_burst_en().bit()),
            )
            .finish()
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for crate::generic::Reg<OUT_CONF0_CH2_SPEC> {
    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
        self.read().fmt(f)
    }
}
impl W {
    #[doc = "Bit 0 - This bit is used to reset DMA channel 2 Tx FSM and Tx FIFO pointer."]
    #[inline(always)]
    #[must_use]
    pub fn out_rst(&mut self) -> OUT_RST_W<OUT_CONF0_CH2_SPEC, 0> {
        OUT_RST_W::new(self)
    }
    #[doc = "Bit 1 - reserved"]
    #[inline(always)]
    #[must_use]
    pub fn out_loop_test(&mut self) -> OUT_LOOP_TEST_W<OUT_CONF0_CH2_SPEC, 1> {
        OUT_LOOP_TEST_W::new(self)
    }
    #[doc = "Bit 2 - Set this bit to enable automatic outlink-writeback when all the data in tx buffer has been transmitted."]
    #[inline(always)]
    #[must_use]
    pub fn out_auto_wrback(&mut self) -> OUT_AUTO_WRBACK_W<OUT_CONF0_CH2_SPEC, 2> {
        OUT_AUTO_WRBACK_W::new(self)
    }
    #[doc = "Bit 3 - EOF flag generation mode when transmitting data. 1: EOF flag for Tx channel 2 is generated when data need to transmit has been popped from FIFO in DMA"]
    #[inline(always)]
    #[must_use]
    pub fn out_eof_mode(&mut self) -> OUT_EOF_MODE_W<OUT_CONF0_CH2_SPEC, 3> {
        OUT_EOF_MODE_W::new(self)
    }
    #[doc = "Bit 4 - Set this bit to 1 to enable INCR burst transfer for Tx channel 2 reading link descriptor when accessing internal SRAM."]
    #[inline(always)]
    #[must_use]
    pub fn outdscr_burst_en(&mut self) -> OUTDSCR_BURST_EN_W<OUT_CONF0_CH2_SPEC, 4> {
        OUTDSCR_BURST_EN_W::new(self)
    }
    #[doc = "Bit 5 - Set this bit to 1 to enable INCR burst transfer for Tx channel 2 transmitting data when accessing internal SRAM."]
    #[inline(always)]
    #[must_use]
    pub fn out_data_burst_en(&mut self) -> OUT_DATA_BURST_EN_W<OUT_CONF0_CH2_SPEC, 5> {
        OUT_DATA_BURST_EN_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.bits = bits;
        self
    }
}
#[doc = "DMA_OUT_CONF0_CH2_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`out_conf0_ch2::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`out_conf0_ch2::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct OUT_CONF0_CH2_SPEC;
impl crate::RegisterSpec for OUT_CONF0_CH2_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`out_conf0_ch2::R`](R) reader structure"]
impl crate::Readable for OUT_CONF0_CH2_SPEC {}
#[doc = "`write(|w| ..)` method takes [`out_conf0_ch2::W`](W) writer structure"]
impl crate::Writable for OUT_CONF0_CH2_SPEC {
    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets OUT_CONF0_CH2 to value 0x08"]
impl crate::Resettable for OUT_CONF0_CH2_SPEC {
    const RESET_VALUE: Self::Ux = 0x08;
}